The metamorphism in the Central Himalaya

ABSTRACT All along the Himalayan chain an axis of crystalline rocks has been preserved, made of the Higher Himalaya crystalline and the crystalline nappes of the Lesser Himalaya. The salient points of the metamorphism, as deduced from data collected in central Himalaya (central Nepal and Kumaun), are:

• 1 The Higher Himalaya crystalline, also called the Tibetan Slab, displays a polymetamorphic history with a first stage of Barrovian type overprinted by a lower pressure and/or higher temperature type metamorphism. The metamorphism is due to quick and quasi-adiabatic uplift of the Tibetan Slab by transport along an MCT ramp, accompanied by thermal refraction effects in the contact zone between the gneisses and their sedimentary cover. The resulting metamorphic pattern is an apparent (diachronic) inverse zonation, with the sillimanite zone above the kyanite zone.
• 2 Conversely, the famous inverted zonation of the Lesser Himalaya is basically a primary pattern, acquired during a one-stage prograde metamorphism. Its origin must be related to the thrusting along the MCT, with heat supplied from the overlying hot Tibetan Slab, as shown by synmetamorphic microstructures and the close geometrical relationships between the metamorphic isograds and the thrust.
• 3 Thermal equilibrium is reached between units above and below the MCT. Far behind the thrust tip there is good agreement between the maximum temperature attained in the hanging wall and the temperature of the Tibetan Slab during the second metamorphic stage; but closer to the MCT front, the thermal accordance between both sides of the thrust is due to a retrogressive metamorphic episode in the basal part of the Tibetan Slab.

     

Geochemistry and the Sm–Nd model age of sedimentary rocks from the lower horizon of the cover in the northeastern part of the West Siberian Platform

The pre-Jurassic basement and lower (Jurassic) horizons of the sedimentary cover in Hole Borovaya 6 were studied. Analysis of rare and rare-earth elements shows that Jurassic sedimentary rocks were most likely formed at the expense of erosion and mixing of heterogeneous materials, namely acid sources of the Siberian Platform and Triassic riftogenic basaltoids. The variations of ¹⁴⁷Sm/¹⁴⁴Nd (0.1076–0.1250) and ¹⁴³Nd/¹⁴⁴Nd (0.512202–0.512437), as well as the Sm–Nd model ages of Jurassic sediments (1146–1362 Ma), provide certain evidence for participation of the Mesoproterozoic substrate in the formation of the rocks studied. The Sm–Nd model age of pre-Jurassic rocks (1281 Ma) is Mesoproterozoic as well. The Precambrian crystalline basement of the Siberian Platform is a likely source of these sedimentary rocks.     

A passive seismic approach to estimating the thickness of sedimentary cover on the Nullarbor Plain,Western Australia

Passive seismic approaches, using a single-station, enable rapid, cost-effective and non-invasive estimates of the thickness of sedimentary rocks overlying crystalline basement. This approach was applied to estimate the Cenozoic and Cretaceous succession beneath the Nullarbor Plain in southeastern Western Australia. Passive seismic data acquired at the majority of the 94 sites show a single, strong resonance frequency peak between 0.4 and 0.6 Hz suggesting an impedance contrast of a single subsurface layer. Modelling these resonance frequencies against known stratigraphy at 12 drill holes shows that this impedance contrast corresponds to the contact of the base of the Cenozoic–Cretaceous sedimentary succession of the Eucla and Bight basins with the crystalline basement. Data from the remaining sites produced sediment thickness estimates ranging from only tens of metres near the western edge of the Nullarbor Plain to over 860 m near its southern margin. Near this margin, rapid thickening of the sedimentary cover is coincident with an interpreted paleosea-cliff or indicative of localised faulting. Beneath the Western Australian portion of the Nullarbor Plain the sedimentary cover is on average 320 m thick with the succession thinning gradually towards the margins of the basin. A passive seismic approach is thus seen as a useful screening tool for the mineral exploration industry in areas that are under cover allowing for better targeting and cost-reduction in greenfields exploration.     

The western border of the Indian plate: implications for Himalayan geology

The study of regions situated beyond the western margin of the present-day Indian plate (Afghanistan principally) point to the following facts:

1. (1) During the Late Precambrian—Early Paleozoic, stratigraphical continuity existed between western and central Iran, Central Afghanistan, Salt Range and western Pakistan.

2. (2) During the Paleozoic a similar epicontinental cover existed in central Afghanistan, Kashmir and Tibet, with Gondwana tillites and associated cold fauna, such as in India (Umaria); however, a so-called Hercynian zone exists also in northern Iran—Hindu Kush and northern Pamir: it exibits a Middle Paleozoic unconformity (Upper DevonianCarboniferous) on metamorphic Early Paleozoic.

3. (3) The end of the Paleozoic, is marked by: a fracturation of the basement of the Hercynian zone, with powerful volcanic eruptions at the northern part of Hindu Kush, Kashmir (Panjal trap) and also Nepal (Nar valley) the formation of a geosynclinal zone at the southern part of Hercynian zone (Turkman, Penjaw).

4. (4) During the Jurassic: the geosynclinal evolution of the Turkman—Penjaw furrow accelerated, with the accumulation of flysch, radiolarites, ophiolites, olistolites and incipient HP metamorphism. A general subduction took place followed by a Neocimmerian orogenic phase with overthrusting of the central Afghanistan ranges on the scar of the geosynclinal furrows.

5. (5) During the Cretaceous: the geosynclinal evolution ended: Lower Cretaceous lies unconformably on the folded Jurassic flysch. In eastern Afghanistan and northern Pakistan, during the Middle (?) or Upper Cretaceous, a new geosynclinal zone was created.

6. (6) During the Cenozoic, central Afghanistan was emerged; northwards, sedimentary basins were created along the Herat fault, with volcanic and magmatic activity. A southeastern geosynclinal furrow evolved with accumulation of flysch, ophiolites and finally molasse deposits (Katawas—Soleimans). Its western border began overthrusting, but this movement changed into a left lateral fault i.e., the presentday Chaman Arghandeh fault.

Conclusion: Two major phases of dislocation took place during the geological history of Gondwana: the first one began during the Permian and ended in the Jurassic; the second one began during the Cretaceous and is still active. The important Eocimmerian orogenic phenomena, existing in the Central Afghanistan and northern Pakistan, took place at the edge of a Gondwana continental fragment, which was larger than the presentday Indian plate. Coeval phenomena may exist in the Himalayan region and perhaps in one of the ophiolitic sutures of Tibet.     

Transverse lineation and large-scale structures related to Alpine obduction in Corsica

In Alpine Corsica, the major tectonic event during the late Cretaceous was the thrusting to the west of an ophiolitic nappe and its sedimentary cover upon the Variscan basement and its Mesozoic cover. A detailed field survey shows that the basal contact of the nappe corresponds to a pluri-kilometric scale shear zone. Thus gneissified basement slices have been tectonically emplaced in the ophiolitic nappe. The thrusting was responsible for small scale structures: foliation, lineation and folds, initiated in a HP/LT metamorphic context. The deformation analysis shows that the finite strain ellipsoid lies in the constriction field close to that for plane strain. Moreover occurrences of rotational criteria in the XZ planes (sigmoidal micas, asymmetric pressure shadows, quartz C-axes fabrics) are in agreement with shear from east to west. All structural data from microscopic to kilometric scales, of which the most widespread is a transverse stretching lineation, can be interpreted by a simple shear model involving ductile synmetamorphic deformation. At the plate tectonic scale the ophiolitic obduction is due to intraoceanic subduction blocked by underthrusting of continental crust beneath oceanic lithosphere.     

Tertiary plate tectonics and high-pressure metamorphism in New Caledonia

The sialic basement of New Caledonia is a Permian-Jurassic greywacke sequence which was folded and metamorphosed to prehnite-pumpellyite or low-grade greenschist facies by the Late Jurassic. Succeeding Cretaceous-Eocene sediments unconformably overlie this basement and extend outwards onto oceanic crust. Tertiary tectonism occurred in three distinct phases.

1. (1) During the Late Eocene a nappe of peridotite was obducted onto southern New Caledonia from northeast to southwest, but without causing significant metamorphism in the underlying sialic rocks.

2. (2) Oligocene compressive thrust tectonics in the northern part of the island accompanied a major east-west subduction zone, at least 30 km wide, which is identified by an imbricate system of tectonically intruded melanges and by development of lawsonite-bearing assemblages in adjacent country rocks; this high-pressure mineralogy constituted a primary metamorphism for the Cretaceous-Eocene sedimentary pile, but was overprinted on the Mesozoic prehnite-pumpellyite metagreywackes.

3. (3) Post-Oligocene transcurrent faulting along a northwest-southeast line (the sillon) parallel to the west coast caused at least 150 km of dextral offset of the southwest frontal margin of the Eocene ultramafic nappe.

At the present time, the tectonics of the southwest Pacific are related to a series of opposite facing subduction (Benioff) zones connected by transform faults extending from New Britain-Solomon Islands south through the New Hebrides to New Zealand and marking the boundary between the Australian and Pacific plates. Available geologic data from this region suggest that a similar geometry existed during the Tertiary and that the microcontinents of New Guinea, New Caledonia and New Zealand all lay along the former plate boundary which has since migrated north and east by a complex process of sea-floor spreading behind the active island arcs.     

四川盆地基底及深部地质结构研究的进展

根据对近年来区域地质、多种地球物理资料和深钻井资料的综合研究，认为四川盆地属扬子板块，岩石圈巨厚，最厚可达２００ｋｍ。川西高原属青藏板块的东缘，同时位于中国南北构造带中段，软流圈呈北东向上隆，岩石圈减薄，其最薄处厚度约７０ｋｍ左右。四川盆地的基底由结晶基底与沉积岩变质基底组成，上震旦统为该地区在扬子古板块形成后的第一套沉积盖层。基底的性质、厚度、埋深在不同地区各不相同，从而决定了盆地内部构造区的划分。基底深断裂对盆地的形成与盖层构造的发展也有重要的控制作用。     

The initiation and linkage of surface fractures above a buried strike-slip fault: An experimental approach

Surface fractures in the overburdened sedimentary rocks, formed above a deep-seated basement fault, often provide important information about the kinematics of the underlying master fault. It has already been established that these surface fractures dynamically evolve and link one another with progressive displacement on the master fault below. In the present study, two different series of riedel-type experiments were carried out with clay analogue models under different boundary conditions viz., (i) heterogeneous simple shear of the cover rocks above a buried strike slip fault (wrench system) and (ii) heterogeneous simple shear with a component of shear-normal compression of the overburden package above a basement fault (transpressional system), to observe the initiation and linkage of surface fractures with varying T′ (where T′ = thickness of the overburden normalized with respect to the width of the master fault). In the wrench system, Riedel (R) shears were linked by principal displacement (Y) shears at early stages (shear strain of 0.8 to 1) in thin (2 < T′ < 18) models and finally (at a minimum shear strain of 1.4) gave rise to a through-going fault parallel to the basement fault without development of any other fracture. Conjugate Riedel (R′) shears develop only within the thicker (T′ > 18) clay models at a minimum shear strain of 0.7. With increasing deformation (at a minimum shear strain of 1.2) two R′ shears were joined by an R shear and finally opened up to make a sigmoidal vein with an asymmetry antithetic to the major fault-movement sense. Under transpression, the results were similar to that of heterogeneous simple shear for layers 2 < T′ < 15. In layers of intermediate thickness (15 < T′ < 25) early formed high angle R shears were cross cut by low angle R shears (at a minimum shear strain of 0.5 and shortening of 0.028) and “Riedel-within-Riedel” shears were formed within thick (T′ > 25) models (at minimum shear strain of 0.7 and shortening of 0.1), with marked angularity of secondary fault zone with the master fault at depth.     

Structural zones and continental collision, Central Alps

The traverse of the Central Alps between Lake Constance and Lake Como (eastern Switzerland, northern Italy) allows the reconstruction of a cross-section through a collision belt some 140 km wide and 40 km deep. It can be described in terms of a series of structural zones (A–F), defined by the age and character of the latest phase of penetrative deformation affecting both basement and cover rocks, each zone showing a characteristic structural history. These zones do not coincide with the well-known tectono-stratigraphic Alpine subdivisions (Helvetic, Pennine, Austroalpine) which are based on gross geometry, facies and petrography. Zones A and B, in the north, developed during late Oligocene and Miocene times, affecting the Helvetic realm and the already overlying Pennine and Austroalpine units. Zone A is characterized by a steeply dipping penetrative cleavage S_A, zone B by the same cleavage later modified by nappe-forming movements. Zone F, in the south, also developed during the late Oligocene and Miocene, first as a monoclinal flexure, later as a steeply dipping zone of mylonitization and cataclasis (foliation S_f), affecting Pennine and Austroalpine units. The final manifestation of these movements was the Tonale line and their net result was the uplift of the region to the north by about 20 km. Between these two belts lay an area in which late Oligocene-Miocene movements had little effect — structural zones C (Pennine), D (Pennine-Austroalpine transition) and E (Austroalpine). In zones C and D, the latest phase of penetrative deformation, resulting in large recumbent fold structures and a penetrative foliation S_c zone C, can be dated as late Eocene-early Oligocene. This seems to be related to the overriding of the Austroalpine nappe complex (zone E), which already showed the effects of a late Cretaceous orogeny.Unravelling these events backwards, reveals, at the Eocene—Oligocene boundary, a southward dipping subduction zone in the process of locking. Its mouth is full of upper Cretaceous-Eocene flysch; its throat is choked by the Pennine nappe complex, undergoing the s_c ductile deformation. Before subduction, the Pennine nappe complex can best be described as a mega-mélange-a tectonic mixture of large fragments of continental basement, oceanic basement, trough-facies cover and platform-facies cover, already showing a complicated structural history. It is supposed that collision started in mid-Cretaceous times, not at a single subduction suture (trench), but by complicated surficial processes across a wide zone, as non-matching, rifted and thinned continental margins approached and small oceanic remnants were obducted. Post-mid-Oligocene events are essentially intra-plate compressional effects, combined with isostatic response.     

The role of the Kupferschiefer in the formation of hydrothermal base metal mineralization in the Spessart ore district, Germany: insight from detailed sulfur isotope studies

The Spessart district (SW Germany), located at the southwestern margin of the Permian Kupferschiefer basin in Central Europe, hosts abundant stratabound and structurally controlled base metal mineralization. The mineralization styles identified are (1) stratabound Cu-Pb-Zn-(Ag) ores in Zechstein sedimentary rocks, (2) structurally controlled Cu-As-(Ag) ores in Zechstein sedimentary rocks, (3) crosscutting Co-Ni-(Bi)-As and Cu-Fe-As veins, (4) stratabound metasomatic Fe-Mn carbonate ores in Zechstein dolomite, (5) barren barite veins, and (6) Fe-Mn-As veins in Permian rhyolites. Building on previous work that involved mineralogical, textural, and chemical characterization of the major mineralization types, we have performed a comprehensive sulfur isotope study that applied both conventional and novel laser-ablation multi-collector inductively coupled plasma mass spectrometry techniques. The δ³⁴S values of sulfide minerals from the different ore types are consistently negative and highly variable, in the range between −44.5‰ and −3.9‰, whereas the δ³⁴S values of barite are all positive in the range between 4.7‰ and 18.9‰. Remarkably, stratabound and structurally controlled mineralization in Zechstein sedimentary rocks has the least negative δ³⁴S values, whereas vein-type deposits have consistently more negative δ³⁴S values. The observed pattern of sulfide δ³⁴S values can be best interpreted in terms of fluid mixing at the basement-cover interface. Hydrothermal fluids originating from the crystalline basement migrated upward along subvertical fault zones and were periodically injected into groundwaters that were flowing in the post-Variscan sedimentary cover. These groundwaters had interacted with the Zechstein sedimentary rocks, resulting in fluids characterized by elevated concentrations of reduced sulfur (with negative δ³⁴S values) and alkaline pH. Repeated mixing between both chemically contrasting fluids caused rapid and efficient precipitation of sulfide ore minerals in hydrothermal veins with highly variable but distinctly negative δ³⁴S values.     

Structure and kinematics of the Jungfrau syncline, Faflertal (Valais, Alps), and its regional significance

The formation and structural evolution of the Jungfrau syncline is described, based on excellent outcrops occurring in the Lötschental, in the Central Alps of Switzerland. The quality of the outcrops allows us to demonstrate that the External Massifs of the Swiss Alps have developed due to internal folding. The Jungfrau syncline, which separates the autochtonous Gastern dome from the Aar massif basement gneiss folds, is composed of slivers of basement rocks with their Mesozoic sedimentary cover. In the Inner Faflertal, a side valley of the Lötschental, the 200 m thick syncline comprises four units, the Gastern massif with a reduced Mesozoic sedimentary cover in a normal stratigraphic succession, two units of overturned basement rocks with their Mesozoic sedimentary cover, and the overturned lower limb of the Tschingelhorn gneiss fold of the Aar massif with lenses of its sedimentary cover. Stratigraphy shows that the lower units, related to the Gastern massif, are condensed and that the upper units, deposited farther away from a Gastern paleo-high, form a more complete sequence, linked to the Doldenhorn Meso-Cenozoic basin fill. The integration of these local observations with published regional data leads to the following model. On the northern margin of the Doldenhorn basin, at the northern fringe of the Alpine Tethys, the pre-Triassic crystalline basement and its Mesozoic sedimentary cover were folded by ductile deformation at temperatures above 300 °C and in the presence of high fluid pressures, as the Helvetic and Penninic nappes were overthrusted towards the northwest during the main Alpine deformation phase. The viscosity contrast between the basement gneisses and the sediments caused the formation of large basement anticlines and tight sedimentary synclines (mullion-type structures). The edges of basement blocks bounded by pre-cursor SE-dipping normal faults at the northwestern border of the Doldenhorn basin were deformed by simple shear, creating overturned slices of crystalline rocks with their sedimentary cover in what now forms the Jungfrau syncline. The localisation of ductile deformation in the vicinity of pre-existing SE-dipping faults is thought to have been helped by the circulation of fluids along the faults; these fluids would have been released from the Mesozoic sediments by metamorphic dehydration reactions accompanied by creep and dynamic recrystallisation of quartz at temperatures above 300 °C. Quantification of the deformation suggests a strain ellipsoid with a ratio (1+ e₁ / 1+ e₃) of approximately 1000. The Jungfrau syncline was deformed by more brittle NW-directed shear creating well-developed shear band cleavages at a late stage, after cooling by uplift and erosion. It is suggested that the external massifs of the Alps are basement gneiss folds created at temperatures of 300 °C by detachment through ductile deformation of the upper crust of the European plate as it was underthrusted below the Adriatic plate.     

Superdense CO2 inclusions in Cretaceous quartz–stibnite veins hosted in low-grade Variscan basement of the Western Carpathians, Slovakia

CO₂ inclusions with density up to 1,197 kg m⁻³ occur in quartz–stibnite veins hosted in the low-grade Palaeozoic basement of the Gemericum tectonic unit in the Western Carpathians. Raman microanalysis corroborated CO₂ as dominant gas species accompanied by small amounts of nitrogen (<7.3 mol%) and methane (<2.5 mol%). The superdense CO₂ phase exsolved from an aqueous bulk fluid at temperatures of 183–237°C and pressures between 1.6 and 3.5 kbar, possibly up to 4.5 kbar. Low thermal gradients (∼12–13°C km⁻¹) and the CO₂–CH₄–N₂ fluid composition rule out a genetic link with the subjacent Permian granites and indicate an external, either metamorphogenic (oxidation of siderite, dedolomitization) or lower crustal/mantle, source of the ore-forming fluids.According to microprobe U–Pb–Th dating of monazite, the stibnite-bearing veins formed during early Cretaceous thrusting of the Gemeric basement over the adjacent Veporic unit. The 15- to 18-km depth of burial estimated from the fluid inclusion trapping PT parameters indicates a 8- to 11-km-thick Upper Palaeozoic–Jurassic accretionary complex overlying the Gemeric basement and its Permo-Triassic autochthonous cover.     

Structural geometry of a thick‐skinned fold‐thrust belt termination: The Olary Block in the Adelaide Fold Belt,South Australia

The Olary Block comprises a set of Palaeoproterozoic to Mesoproterozoic basement inliers that were deformed together with the Neoproterozoic sedimentary cover of the Adelaide Geosyncline during the ca 500 Ma Cambro‐Ordovician Delamerian Orogeny. Balanced and restored structural sections across this region show shortening of less than 20%. These basement inliers represent the interface between a region of thick‐skinned deformation bordering the Curnamona Craton to the north and a region of thin‐skinned deformation to the south and west in the Nackara Arc. The basement inliers represent upthrust segments of the subsided basin margin with the sedimentary package thickening to the south and to the west. Earlier formed extensional faults provided the major strain guides during Delamerian shortening. An early phase of east‐west shortening is interpreted to be synchronous with dextral strike‐slip deformation along basement‐relay structures (e.g. Darling River lineament). During progressive shortening the tectonic transport direction rotated into a northwest to north direction, coeval with the onset of the main phase of thin‐skinned fold deformation in the adjacent Nackara Arc.     

Nonconventional hydrocarbon targets in the crystalline basement, and the problem of the recent replenishment of hydrocarbon reserves

Analysis of the distribution of oil pools in sedimentary cover has shown that known platform hydrocarbon fields are closely associated with faults in the crystalline basement and the sedimentary cover itself. Oil pools in the lower productive beds of the sedimentary cover are linked to faulted zones in the crystalline basement. A genetic relationship between oil fields and tectonic dislocations indicates a dominant role for vertical migration in the accumulation of commercial hydrocarbons in the Paleozoic. The conducted geochemical, palynological, geophysical and geological studies have shown that oil and gas pools in the upper sedimentary cover have been formed due to the vertical migration of hydrocarbons, which is also confirmed by the vertical alignment of the oil pools.     

The BanskáŠtiavnica ore district: relationship between metallogenetic processes and the geological evolution of a stratovolcano

The Banská?tiavnica ore district is in the central zone of the largest stratovolcano in the Central Slovakia Neogene Volcanic Field, which is situated at the inner side of the Carpathian arc over the Hercynian basement with the Late Paleozoic and Mesozoic sedimentary cover. Volcanic rocks of the High-K orogenic suite are of the Badenian through Pannonian age (16.5–8.5?Ma). Their petrogenesis is closely related to subduction of flysch belt oceanic basement underneath the advancing Carpathian arc and to back-arc extension processes. The stratovolcano includes a large caldera 20?km in diameter and a late-stage resurgent horst in its centre, exposing a basement and extensive subvolcanic intrusive complex. The following stages have been recognized in the evolution of the stratovolcano: (1)?formation of a large pyroxene/hornblende-pyroxene andesite stratovolcano; (2)?denudation, emplacement of a diorite intrusion; (3) emplacement of a large granodiorite bell-jar pluton within the basement; (4) emplacement of granodiorite/quartz-diorite porphyry stocks and dyke clusters around the pluton; (5) caldera subsidence and its filling by biotite-hornblende andesite volcanics, emplacement of quartz-diorite porphyry sills and dykes at the subvolcanic level; (6)?renewed activity of andesites from dispersed centres on slopes of the volcano; (7) uplift of a resurgent horst accompanied by rhyolite volcanics and granite porphyry dykes. The following types of ore deposits (mineralizations) have been identified in the Banská?tiavnica ore district: 1. Quartz-pyrophyllite-pyrite high-sulphidation system at ?obov, related to the diorite intrusion. 2. Magnetite skarn deposits and occurrences?at contacts of the granodiorite pluton with Mesozoic carbonate rocks. Magnetite ores occur as lenses in the calcic skarns. 3.?Stockwork/disseminated base metal deposit along an irregular network of fractures in apical parts of the granodiorite pluton and in remnants of basement rocks. Mineral paragenesis is simple, with leading sphalerite and galena and minor chalcopyrite and pyrite. In overlying andesites the mineralization is accompanied by metasomatic quartzites and argillites with pyrophyllite, kaolinite, illite and pyrite. 4. Porphyry/skarn copper deposits and occurrences related to granodiorite/quartz-diorite porphyry dyke clusters and stocks around the granodiorite intrusion. The mineralized zone is represented by accumulations of chalcopyrite in exo- and endo-skarns, usually of the magnesian type affected by serpentinization. Besides chalcopyrite, pyrhotite, minor bornite, chalcosite, tennantite and magnetite, rare molybdenite and gold are present. The alteration pattern around productive intrusions includes an external zone of propylitization, a zone of argillitic alteration (kaolinite – illite – pyrite) and an internal zone of phyllic alteration (quartz – sericite – pyrite). Biotitization is rare and limited to porphyry intrusions. 5. Intrusion related “mesothermal” gold deposit in an andesitic environment just above the granodiorite intrusion. Gold of high fineness with base metal mineralization is contained in brecciated and/or banded quartz veins of subhorizontal orientation, parallel to the surface of granodiorite pluton. At least the first phase of mineralization is older than quartz-diorite porphyry sills, which separate granodiorite and blocks of mineralized andesite. 6. Hot spring type advanced argillic systems in the caldera filling. Silicites and opalites accompanied by kaolinite, alunite and pyrite grade downward into smectite dominated argillites. 7. Vein type epithermal precious/base metal deposits and occurrences as a result of the long lasting interaction among structural evolution of the resurgent horst and evolving hydrothermal system, extensive intrusive complex and deep seated siliceous magma chamber serving as heat and magmatic fluid source. Three types of epithermal veins occur in a zonal arrangement: (a) base metal veins ± Au with transition to Cu?±?Bi mineralization at depth in the east/central part of the horst, (b)?Ag – Au veins with minor base metal mineralization and (c) Au – Ag veins located at marginal faults of the horst. Isotopic composition of oxygen and hydrogen in hydrothermal fluids indicate mixing of magmatic and meteoric component (with generally increasing proportion of meteoric component towards younger mineralization periods?). Veins are accompanied by zones of silicification, adularization and sericitization, indicating a low sulphidation environment. 8.?Replacement base metal mineralization of a limited extent in the Mesozoic carbonate rocks next to sulphide rich epithermal base metal veins.     

Catagenesis of terrigenous rocks in the neoproterozoic intracratonic sedimentary basins and its effect on the formation of unconformity-type uranium mineralization

Mineral transformation of host rocks and localization of orebodies at the unconformity-type uranium deposits are considered for the Karku deposit in the northern Ladoga region. It is shown that the great depth of uranium mineral formation and the peculiar composition of host rocks, along with temperature and chemistry of fluids, played a critical role in variation of lithostatic and fluid pressure, porosity, and permeability. The compaction of quartz sandstone and gravelstone, which are typical host rocks at unconformity-type deposits, the development of microstylolithic sutures, conformal structures, pressure solution and deposition of quartz in free pores gave rise to the closure or constraint of pore space and to increase in pore pressure of fluids in the deep part of the Riphean troughs with approaching lithostatic loading. A transitional zone between hydrostatic and lithostatic pressure controlled localization of orebodies and was decisive for uranium mineral formation. This zone coincided with the Riphean-Paleoproterozoic unconformity and sank somewhat into the crystalline basement. Below this transitional zone, the intergranular fluid was under a pressure that was close to the pressure on solid phases, i.e., P _tot ≈ P _fl. The reliability of this phenomenon is confirmed by cessation of pressure solution-redeposition of quartz and distinct deceleration of dehydration of hydrous minerals. As is shown for the Karku deposit, the highly hydrated clay minerals of the illite-smectite series are widespread in its subore portion and lacking at the supraore levels along with termination of quartz regeneration. It is suggested that a zone of superhigh fluid pressure in deep parts of sedimentary basins constrains localization of uranium orebodies by structural and stratigraphic unconformity between Riphean and Paleoproterozoic rocks. It is stated that altered wall rocks at the unconformity-type uranium deposits cannot be identified with products of hydrothermal phyllic and argillic alteration of host rocks at the medium- and low-temperature endogenic deposits. The main distinctions consist in lack of wall-rock metasomatic reaction zoning and acid-alkaline evolution of solutions. All transformations of host rocks should be classified as diverse manifestations of deep catagenesis of sedimentary sequences and buried regolith. The carbon and oxygen isotopic compositions of calcite from host rocks at the Karku deposit are far from those of magmatic and hydrothermal carbonates. They are characterized by a high δ¹⁸O = +17 to +25‰ and a high dispersion of δ¹³C = −1.5 to almost −15‰. No granitoid magmatism is known in the regions, where the unconformity-type uranium deposits occur. Therefore, the rocks of the crystalline basement are the most probable source of uranium, which precipitated on the reductive barrier as a product of interaction with bitumen contained in the Riphean basal beds.     

Basement and cover relations on the northern margin of the Amadeus Basin, central Australia

A major, linear, west-trending deformed zone (The Redbank Zone), 350 km long and up to 20 km wide, can be identified in the Arunta Block immediately north of the Amadeus Basin. The marked linearity of this zone and of the coincident gravity anomaly probably result from thrust-fault movement during the Carboniferous Alice Springs Orogeny. However, in the Ormiston area, there is evidence that the zone originated prior to 1070 m.y. and acted as a major crustal feature controlling the later orogenic event.The Alice Springs Orogeny affected the overlying Proterozoic and Lower Palaeozoic cover rocks as well as the Arunta Block basement. During the orogeny, steep north-dipping thrusts within the Redbank Zone were reactivated causing uplift to the north. These faults penetrated the Heavitree Quartzite—the basal unit of the cover sequence—to drive wedges of basement, with attached veneers of Heavitree Quartzite, for up to 20 km southward within the overlying Bitter Springs Formation. The nappes did not reach the surface or penetrate formations above the Bitter Springs. Accompanying nappe emplacement the Basin to the south rapidly deepened to receive a thick wedge of synorogenic molasse sediments.Gravity, sedimentary and structural features combine to suggest that the Alice Springs orogeny movements reached their maximum on the central part of the northern margin of the Amadeus Basin, in the Ormiston area.     

Strain analysis of a Northern Apennine shear zone using deformed marble breccias

The Alpi Apuane region of the Northern Apennines appears to have been deformed within a large-scale, low-angle shear zone with an overthrust sense of movement. The presence of mineral stretching lineations, folds progressively rotated into the X strain direction, and schistosities which intersect the nappe boundaries at small angles suggest that a component of shear strain occurred during the deformation. The strain ratios and orientations on two-dimensional sections have been determined from deformed marble breccias, reduction spots, and oncalites. Data from three or more non-perpendicular, non-principal sections have been combined to determine the finite strain ellipsoids at 33 sites within the shear zone.The finite strains have been separated into components of simple shear (γ), longitudinal strain (λ), and volume change (Δ). Algebraic expressions have been derived and graphs constructed which enable components of γ, γ and Δ, and γ and λ to be determined directly from a knowledge of strain ratio (R) within the shear zone and the angle (θ) between the principal strain direction and the shear zone boundary. The Alpi Apuane data indicate that neither simple shear alone, nor simple shear with volume change can satisfactorily explain the observed strains. Consideration of simple shear plus longitudinal strain leads to a general relationship in which the value of shear increases, and the values of longitudinal strain change along a SW-NE profile across the zone. Integration of the resulting shear strain-distance curves gives a minimum displacement of 4 km within the shear zone. Combination of the finite strains with the total time of deformation known from K/Ar studies leads to average strain rates from 1.4 to 9.6 × 10⁻¹⁵ sec⁻¹.A characteristic flat-ramp-flat geometry initially formed the boundaries of what was later to develop into the overthrust shear zone, and deformation of the underlying crystalline basement is believed to have occurred by ductile shearing. Estimates of 21% crustal shortening for the region suggest that the crustal thickness prior to deformation was approximately 20 km in this part of the Northern Apennines.     

Effects of CO2-H2O and oblique collision on orogenesis—the european hercynides as an example

The European Hercynides are considered the collisional result of Baltica and the microcontinents of Southern Europe, after subduction destroyed the intervening Rheic Ocean during the early Paleozoic. Their geotectonic development is assumed to consist of four overlapping stages:

1. (1) lithospheric thinning, upwelling of hot asthenospheric material, subsidence along listric faults, and basinal and geosynclinal development on the opposing shelves of the Rheic Ocean starting in pre-Devonian time;

2. (2) intermittent subduction of the Rheic Ocean interspersed with episodes of fracturing, volcanism, local uplift and subsidence, and basement reactivation as a result of compression with dextral megashear, particularly since the earliest Devonian;

3. (3) several phases of folding with a northward vergence, and thrusting and overthrusting along listric surfaces, the true orogenic stage;

4. (4) post-orogenic stage of massive granite intrusions and subsequent volcanism in the Permo-Triassic

.The high clastic content (as opposed to carbonates) of the sedimentary sequences involved in the subduction and folding processes and the consequent release of large amounts of meteoric water are held responsible for the synorogenic and post-orogenic magma rise, and for the wide zone of anatectic granites and migmatites. The dominant dextral megashear, the constant re-adjustment of the microcontinents of Southern Europe (oblique collision) and the scarcity of back-arc basins, oceanic plateaus and microcontinents led to the poor preservation of ophiolites and ultrabasic rocks, and to a wide (over 1500 km) Hercynian Foldbelt.During the Paleozoic, the depositional center of the Rhenish Massif shifted from south polar latitudes in the early Ordovician to tropical positions within a period of about 100 m.y. The sediment facies reflects this paleogeographic development.     

Tectono-sedimentary evolution of the Miocene Oued Dayr Formation (Ghomaride Complex,Internal Domain of the Maghrebian Rif Belt,Morocco)

This work deals with sedimentological, petrographic, and structural analyses of a middle Miocene late-orogenic sedimentary cycle, denoted Oued Dayr Formation, recognized in the Rifian sector of the Maghrebian Chain (Morocco). The analyzed Formation (75 m thick) starts with 15–20 m of light colored polymict conglomerates, with minor sandstone beds, lying on the Paleozoic basement and Mesozoic cover of the Ghomaride Nappe. Facies analysis indicates a fining-upward deposition in a marine environment characterized by increasing deepening, reflecting a subsidence rate that exceeds sedimentary supply. Petrographic analysis points out that sandstones are represented by litharenites originated by erosion of recycled orogen. The conglomerates pebbles and cobbles consist of Alpine low- to high-grade metamorphic rocks as metarenites, phyllites, mylonitic quartzites, micaschists, augen gneisses deriving from the exhumed deep metamorphic basement, the overlying metasedimentary of the Sebtide Nappes and of sedimentary rocks as sandstones, jaspes, limestones, and shales deriving from the Ghomaride Nappes and their sedimentary cover. Data reveal mixed provenance indicating that the Oued Dayr Formation was fed by the Internal Nappes stack of the Maghrebian Chain. Structural analysis shows that the Oued Dayr Formation accumulated in a Thrust-Top basin, during an early extension (D₀ phase), recorded by synsedimentary normal faults within middle Langhian deposits on the rear of the Internal Nappes stack. Subsequent ductile and brittle compressional (D₁, D₂, D₃) and extensional (D₄) deformation phases occurred during and/or after the stacking, exhumation, and early unroofing of Sebtide Complex coeval with the opening of the western Mediterranean back-arc basins since middle Miocene time.