地震密度反演及地层孔隙度估计

地层密度直接与孔隙度、孔隙流体类型、饱和度和骨架矿物成分有关.本文通过理论分析和计算,讨论了油气藏储层物性参数变化引起的密度变化及密度变化对地震波速度、阻抗和振幅的影响,提出了基于完全纵波方程的全波形地震密度反演和孔隙度估计方法,克服了常规地震密度反演对地震数据更多处理引起的信号畸变,提高了地震密度反演和地层孔隙度估计的精度.该方法采用波场导数的时间积分和多炮求和,对地震数据中的噪声具有比较强的压制作用.理论模型研究表明该方法是可行的.通过对我国西部某气田实际数据处理、分析和反演,获得了地层密度和孔隙度,结果与测井基本吻合,证明了预测结果的准确性和方法的有效性,从而为后续的有效储层预测和储量计算提供了可靠的数据.     

Model-based optimization of source locations for 3D acoustic seismic full-waveform inversion

Besides classical imaging techniques, full-waveform inversion is an increasingly popular method to derive elastic subsurface properties from seismic data. High-resolution velocity models can be obtained, and spatial sampling criteria are less strict than for imaging methods, because the entire information content of the seismic waveforms is used. As high operational costs arise from seismic surveys, the acquirable data volume is often limited by economic criteria. By selecting optimal locations for seismic sources, the information content of the data can be maximized, and the number of sources and thus the acquisition costs can be reduced compared with standard acquisition designs. The computation of such optimized designs for large-size 3D inverse problems at affordable computational cost is challenging. By using a sequential receiver-wise optimization strategy, we substantially reduce the computational requirements of the optimization process. We prove the applicability of this method by means of numerical 3D acoustic examples. Optimized source designs for different receiver patterns are computed for a realistic subsurface model, and the value of the designs is evaluated by comparing checkerboard inversion tests with different acquisition designs. Our examples show that inversion results with higher accuracy can be obtained with the optimized designs, regardless of the number of sources, the number of receivers, or the receiver distribution. Larger benefits of the optimized designs are visible when a sparse receiver geometry is used.     

The use of low frequencies in a full‐waveform inversion and impedance inversion land seismic case study

Velocity model building and impedance inversion generally suffer from a lack of intermediate wavenumber content in seismic data. Intermediate wavenumbers may be retrieved directly from seismic data sets if enough low frequencies are recorded. Over the past years, improvements in acquisition have allowed us to obtain seismic data with a broader frequency spectrum. To illustrate the benefits of broadband acquisition, notably the recording of low frequencies, we discuss the inversion of land seismic data acquired in Inner Mongolia, China. This data set contains frequencies from 1.5–80 Hz. We show that the velocity estimate based on an acoustic full‐waveform inversion approach is superior to one obtained from reflection traveltime inversion because after full‐waveform inversion the background velocity conforms to geology. We also illustrate the added value of low frequencies in an impedance estimate.     

基于地震数据子集的波形反演思路、方法与应用

地震数据与地下介质物性参数之间的复杂关系,决定了地震全波形反演在理论方法上面临着强烈的非线性难题.地下不同物性参数的不同分量在地震数据上具有不同的表现,勘探的不同阶段对地下介质模型的精度也具有不同的要求,这就决定了在地震全波形反演过程中不必时刻追求地震数据全部信息的匹配,部分信息的匹配就有可能解决现阶段的某些问题,还可以一定程度上规避匹配全部地震信息所遇到的强烈非线性难题.基于这样的考虑,我们提出了利用地震数据子集进行波形反演的思路,给出了统一的反演方法,并通过基于包络数据子集以及反射波数据子集的波形反演的理论模型与实际资料反演试验,证明了所提出的波形反演思路和方法的正确性.     

地震反射波反演二阶优化方法及其应用

常规地震数据大都缺乏低频成分与长炮检距信号,经典的全波形反演方法不易获取中、深层弹性参数模型的长波长分量,波动方程反射波形反演作为替代方法近来受到极大关注.然而,现有的反射波形反演方法几乎都采用梯度类的一阶优化算法,收敛性和精度都有待提高.本文在二阶优化理论框架下,推导弹性参数背景与扰动模型的反射波敏感核、泛函梯度以及海森算子,揭示海森矩阵对泛函梯度的去模糊化作用和改善反演的工作机制.推覆体模型合成数据实验表明,相比于常用的共轭梯度法,利用近似海森矩阵的高斯-牛顿法明显提升了反射波形反演的收敛性与宽谱建模能力.在东海实例中,本文方法超越常用的反射走时层析技术,通过改善中、深层偏移速度建模,支撑逆时偏移高分辨率刻画长江坳陷内部复杂的断裂系统,改善了深部基底的成像质量.

     

基于弹性波全波形反演的主被动源多分量混采地震数据速度建模

在常规地震采集中,被动源地震波场往往被视为噪声而去除,这就造成了部分有用信息的丢失.在目标区进行主动源和被动源弹性波地震数据的多分量混合采集,并对两种数据进行联合应用,使其在照明和频带上优势互补,能显著提高成像和反演的质量.本文针对两种不同类型的主被动源混采地震数据,分别提出了相应的联合全波形反演方法.首先,针对主动源与瞬态被动源弹性波混采地震数据,为充分利用被动源对深部照明的优势,同时有效压制被动震源点附近的成像异常值,提出了基于动态随机组合的弹性波被动源照明补偿反演策略.然后,针对低频缺失主动源与背景噪声型被动源弹性波混采地震数据,为充分利用被动源波场携带的低频信息,并避免对被动源的定位和子波估计,提出了基于地震干涉与不依赖子波算法的弹性波主被动源串联反演策略.最后,分别将两种方法在Marmousi模型上进行反演测试.结果说明,综合利用主动源和被动源弹性波混采地震数据,不仅能增强深部弹性参数反演效果,还能更好地构建弹性参数模型的宏观结构,并有助于缓解常规弹性波全波形反演的跳周问题.

     

Crustal velocity structure of central Gansu Province from regional seismic waveform inversion using firework algorithm

The firework algorithm (FWA) is a novel swarm intelligence-based method recently proposed for the optimization of multi-parameter, nonlinear functions. Numerical waveform inversion experiments using a synthetic model show that the FWA performs well in both solution quality and efficiency. We apply the FWA in this study to crustal velocity structure inversion using regional seismic waveform data of central Gansu on the northeastern margin of the Qinghai-Tibet plateau. Seismograms recorded from the moment magnitude (M _W) 5.4 Minxian earthquake enable obtaining an average crustal velocity model for this region. We initially carried out a series of FWA robustness tests in regional waveform inversion at the same earthquake and station positions across the study region, inverting two velocity structure models, with and without a low-velocity crustal layer; the accuracy of our average inversion results and their standard deviations reveal the advantages of the FWA for the inversion of regional seismic waveforms. We applied the FWA across our study area using three component waveform data recorded by nine broadband permanent seismic stations with epicentral distances ranging between 146 and 437 km. These inversion results show that the average thickness of the crust in this region is 46.75 km, while thicknesses of the sedimentary layer, and the upper, middle, and lower crust are 3.15, 15.69, 13.08, and 14.83 km, respectively. Results also show that the P-wave velocities of these layers and the upper mantle are 4.47, 6.07, 6.12, 6.87, and 8.18 km/s, respectively.     

Velocity model building from seismic reflection data by full‐waveform inversion

Full‐waveform inversion is re‐emerging as a powerful data‐fitting procedure for quantitative seismic imaging of the subsurface from wide‐azimuth seismic data. This method is suitable to build high‐resolution velocity models provided that the targeted area is sampled by both diving waves and reflected waves. However, the conventional formulation of full‐waveform inversion prevents the reconstruction of the small wavenumber components of the velocity model when the subsurface is sampled by reflected waves only. This typically occurs as the depth becomes significant with respect to the length of the receiver array. This study first aims to highlight the limits of the conventional form of full‐waveform inversion when applied to seismic reflection data, through a simple canonical example of seismic imaging and to propose a new inversion workflow that overcomes these limitations. The governing idea is to decompose the subsurface model as a background part, which we seek to update and a singular part that corresponds to some prior knowledge of the reflectivity. Forcing this scale uncoupling in the full‐waveform inversion formalism brings out the transmitted wavepaths that connect the sources and receivers to the reflectors in the sensitivity kernel of the full‐waveform inversion, which is otherwise dominated by the migration impulse responses formed by the correlation of the downgoing direct wavefields coming from the shot and receiver positions. This transmission regime makes full‐waveform inversion amenable to the update of the long‐to‐intermediate wavelengths of the background model from the wide scattering‐angle information. However, we show that this prior knowledge of the reflectivity does not prevent the use of a suitable misfit measurement based on cross‐correlation, to avoid cycle‐skipping issues as well as a suitable inversion domain as the pseudo‐depth domain that allows us to preserve the invariant property of the zero‐offset time. This latter feature is useful to avoid updating the reflectivity information at each non‐linear iteration of the full‐waveform inversion, hence considerably reducing the computational cost of the entire workflow. Prior information of the reflectivity in the full‐waveform inversion formalism, a robust misfit function that prevents cycle‐skipping issues and a suitable inversion domain that preserves the seismic invariant are the three key ingredients that should ensure well‐posedness and computational efficiency of full‐waveform inversion algorithms for seismic reflection data.     

测井约束地震波形反演的同伦摄动法

测井数据和地震数据是地震勘探中两种最重要的资料. 测井约束地震波形反演是在非线性波形反演的基础上,利用已知测井资料详细的垂直分辨能力和地震资料均匀密集的水平采样特点, 通过迭代反演来求取一个具有较高分辨率的速度参数.本文建立了测井约束反演模型,研究了测井约束下地震波形反演的同伦摄动求解方法.同伦摄动法作为一种新的、求解数学物理中各种非线性问题的有效方法,具有计算速度快、计算精度高的优点.这对于提高反演的精度和效率是十分有益的. 为了表征该方法的有效性和稳定性,分别对水平层状介质模型和逆冲断层带模型进行了数值模拟,并与Landweber迭代法相对比,结果表明该算法具有更好的收敛性,能够取得更为满意的反演效果.     

测井约束地震波形反演的同伦摄动法

测井数据和地震数据是地震勘探中两种最重要的资料. 测井约束地震波形反演是在非线性波形反演的基础上,利用已知测井资料详细的垂直分辨能力和地震资料均匀密集的水平采样特点, 通过迭代反演来求取一个具有较高分辨率的速度参数.本文建立了测井约束反演模型,研究了测井约束下地震波形反演的同伦摄动求解方法.同伦摄动法作为一种新的、求解数学物理中各种非线性问题的有效方法,具有计算速度快、计算精度高的优点.这对于提高反演的精度和效率是十分有益的. 为了表征该方法的有效性和稳定性,分别对水平层状介质模型和逆冲断层带模型进行了数值模拟,并与Landweber迭代法相对比,结果表明该算法具有更好的收敛性,能够取得更为满意的反演效果.     

Genetic algorithm in seismic waveform inversion and its application in deep seismic sounding data interpretation

A genetic algorithm of body waveform inversion is presented for better understanding of crustal and upper mantle structures with deep seismic sounding （DSS） waveform data. General reflection and transmission synthetic seismogram algorithm, which is capable of calculating the response of thin alternating high and low velocity layers, is applied as a solution for forward modeling, and the genetic algorithm is used to find the optimal solution of the inverse problem. Numerical tests suggest that the method has the capability of resolving low-velocity layers, thin alternating high and low velocity layers, and noise suppression. Waveform inversion using P-wave records from Zeku, Xiahe and Lintao shots in the seismic wide-angle reflection/refraction survey along northeastern Qinghai-Xizang （Tibeteau） Plateau has revealed fine structures of the bottom of the upper crust and alternating layers in the middle/lower crust and topmost upper mantle.     

Joint viscoacoustic waveform inversion with the separated upgoing and downgoing wavefields in zero-offset vertical seismic profile data

The attenuation of seismic waves propagating in reservoirs can be obtained accurately from the data analysis of vertical seismic profile in terms of the quality-factor Q. The common methods usually use the downgoing wavefields in vertical seismic profile data. However, the downgoing wavefields consist of more than 90% energy of the spectrum of the vertical seismic profile data, making it difficult to estimate the viscoacoustic parameters accurately. Thus, a joint viscoacoustic waveform inversion of velocity and quality-factor is proposed based on the multi-objective functions and analysis of the difference between the results inverted from the separated upgoing and downgoing wavefields. A simple separating step is accomplished by the reflectivity method to obtain the individual wavefields in vertical seismic profile data, and then a joint inversion is carried out to make full use of the information of the individual wavefields and improve the convergence of viscoacoustic full-waveform inversion. The sensitivity analysis of the different wavefields to the velocity and quality-factor shows that the upgoing and downgoing wavefields contribute differently to the viscoacoustic parameters. A numerical example validates our method can improve the accuracy of viscoacoustic parameters compared with the direct inversion using full wavefield and the separate inversion using upgoing or downgoing wavefield. The application on real field data indicates our method can recover a reliable viscoacoustic model, which helps reservoir appraisal.     

Accelerating the T‐matrix approach to seismic full‐waveform inversion by domain decomposition

A seismic variant of the distorted Born iterative inversion method, which is commonly used in electromagnetic and acoustic (medical) imaging, has been recently developed on the basis of the T‐matrix approach of multiple scattering theory. The distorted Born iterative method is consistent with the Gauss–Newton method, but its implementation is different, and there are potentially significant computational advantages of using the T‐matrix approach in this context. It has been shown that the computational cost associated with the updating of the background medium Green functions after each iteration can be reduced via the use of various linearisation or quasi‐linearisation techniques. However, these techniques for reducing the computational cost may not work well in the presence of strong contrasts. To deal with this, we have now developed a domain decomposition method, which allows one to decompose the seismic velocity model into an arbitrary number of heterogeneous domains that can be treated separately and in parallel. The new domain decomposition method is based on the concept of a scattering‐path matrix, which is well known in solid‐state physics. If the seismic model consists of different domains that are well separated (e.g., different reservoirs within a sedimentary basin), then the scattering‐path matrix formulation can be used to derive approximations that are sufficiently accurate but far more speedy and much less memory demanding because they ignore the interaction between different domains. However, we show here that one can also use the scattering‐path matrix formulation to calculate the overall T‐matrix for a large model exactly without any approximations at a computational cost that is significantly smaller than the cost associated with an exact formal matrix inversion solution. This is because we have derived exact analytical results for the special case of two interacting domains and combined them with Strassen's formulas for fast recursive matrix inversion. To illustrate the fact that we have accelerated the T‐matrix approach to full‐waveform inversion by domain decomposition, we perform a series of numerical experiments based on synthetic data associated with a complex salt model and a simpler two‐dimensional model that can be naturally decomposed into separate upper and lower domains. If the domain decomposition method is combined with an additional layer of multi‐scale regularisation (based on spatial smoothing of the sensitivity matrix and the data residual vector along the receiver line) beyond standard sequential frequency inversion, then one apparently can also obtain stable inversion results in the absence of ultra‐low frequencies and reduced computation times.     

基于精确震源函数的解调包络多尺度全波形反演

本文提出解调包络方法来重构地震记录中缺失的低频信号,同时该方法能够降低全波形反演的非线性程度;提出伴随状态震源函数反演方法来得到精确的震源函数,并推导了梯度计算公式;解调包络方法结合低通滤波技术,实现了从低频到高频的多尺度反演策略,有效缓解了全波形反演的周波跳跃问题.数值算例证明了解调包络、伴随状态震源函数反演方法和低通滤波多尺度反演策略的可行性及优越性.震源函数反演精度测试结果表明：即使观测记录在缺失低频信息的情况下,也能反演得到精确的震源函数.缺失低频测试和抗噪能力测试结果表明：即使地震数据中缺失9Hz以下的低频信号或者信噪比极低的情况下,利用反演得到的精确震源函数进行解调包络多尺度全波形反演,同样可以得到高精度的全波形反演结果.与Hilbert包络全波形反演对比结果表明：解调包络在重构低频和降低伴随震源主频方面具有一定优势.

     

Improved hybrid iterative optimization method for seismic full waveform inversion

In full waveform inversion (FWI), Hessian information of the misfit function is of vital importance for accelerating the convergence of the inversion; however, it usually is not feasible to directly calculate the Hessian matrix and its inverse. Although the limited memory Broyden-Fletcher-Goldfarb-Shanno (L-BFGS) or Hessian-free inexact Newton (HFN) methods are able to use approximate Hessian information, the information they collect is limited. The two methods can be interlaced because they are able to provide Hessian information for each other; however, the performance of the hybrid iterative method is dependent on the effective switch between the two methods. We have designed a new scheme to realize the dynamic switch between the two methods based on the decrease ratio (DR) of the misfit function (objective function), and we propose a modified hybrid iterative optimization method. In the new scheme, we compare the DR of the two methods for a given computational cost, and choose the method with a faster DR. Using these steps, the modified method always implements the most efficient method. The results of Marmousi and over thrust model testings indicate that the convergence with our modified method is significantly faster than that in the L-BFGS method with no loss of inversion quality. Moreover, our modified outperforms the enriched method by a little speedup of the convergence. It also exhibits better efficiency than the HFN method.     

基于多网格的频率域全波形反演(英文)

频率域全波形反演虽然克服了时间方向上的局部极小值问题,但是地下介质的复杂性使其在空间域仍然存在局部极小值缺陷。在优化梯度法基础上,本文采用预条件双共轭梯度稳定算法和多重网格方法计算反演中的波场传播和目标函数的梯度,在保证计算速度的同时,减小计算机内存的消耗。频率域波形反演和多重网格的多尺度性质有效改善问题极小值缺陷,加快反演的收敛速度。以局部非均匀的三孔模型和Marmousi模型的数值模拟结果验证了该算法的有效性。     

基于声学全波形反演的油气藏地震成像方法

岩性油气藏在我国天然气勘探开发中占有非常重要的位置,其分布区域的成像是合理布设井位,提高钻井成功率的关键之一.本文首先基于地下介质的声学近似和波场回传理论,利用频率域单程声波方程延拓计算地震波场,进行全波形反演,获得地层密度和体积模量的定量成像,并依据油气藏物性特征和流体饱和多孔介质岩石物理模型,简要讨论了孔隙度和饱和度与密度及体积模量的关系,明确了地震油气藏成像新概念.在此基础上,定义了基于流体体积模量和孔隙度的成像函数,进行油气藏成像.理论模型计算表明该方法是可行的.通过对西部地区某气田二维地震数据处理,实现了致密砂岩气藏成像,钻井结果证实了气藏区域成像位置的准确性和方法的有效性.     

基于Born波路径的高斯束初至波波形反演

为了提高表层速度反演精度,本文提出了一种新的波形反演方法.该方法只利用初至波波形信息以减少波形反演对初始模型的依赖性,降低反演多解性与稳定性.由于只利用初至波波形信息,所以该方法利用高斯束计算格林函数和正演波场,以减少正演计算量.为了避免庞大核函数的存储,该方法基于Born波路径,利用矩阵分解算法实现方向与步长的累加计算.将此基于Born波路径的初至波波形反演方法应用于理论模型实验,并与声波方程全波形反演和初至波射线走时层析方法相对比,发现该方法的反演效果略低于全波形反演方法,但明显优于传统初至波射线走时层析方法,而计算效率却与射线走时层析相当.同时,相对于全波形反演,本文方法对初始模型的依赖性也有所降低.     

时间二阶积分波场的全波形反演

通过对波场的时间二阶积分运算以增强地震数据中的低频成分,提出了一种可有效减小对初始速度模型依赖性的地震数据全波形反演方法-时间二阶积分波场的全波形反演方法.根据散射理论中的散射波场传播方程,推导出时间二阶积分散射波场的传播方程,再利用一阶Born近似对时间二阶积分散射波场传播方程进行线性化.在时间二阶积分散射波场传播方程的基础上,利用散射波场反演地下散射源分布,再利用波场模拟的方法构建地下入射波场,然后根据时间二阶积分散射波场线性传播方程中散射波场与入射波场、速度扰动间的线性关系,应用类似偏移成像的公式得到速度扰动的估计,以此建立时间二阶积分波场的全波形迭代反演方法.最后把时间二阶积分波场的全波形反演结果作为常规全波形反演的初始模型可有效地减小地震波场全波形反演对初始模型的依赖性.应用于Marmousi模型的全频带合成数据和缺失4 Hz以下频谱成分的缺低频合成数据验证所提出的全波形反演方法的正确性和有效性,数值试验显示缺失4 Hz以下频谱成分数据的反演结果与全频带数据的反演结果没有明显差异.     

Optimized experimental design for seismic full waveform inversion: A computationally efficient method including a flexible implementation of acquisition costs

Optimized experimental design aims at reducing the cost of a seismic survey by identifying the optimal locations and amounts of sources and receivers. While the acquisition design in the context of seismic imaging applies criteria like fold, offset and spatial sampling, different attributes such as the sensitivity kernels are more relevant for seismic full waveform inversion. An ideal measure to quantify the goodness of an acquisition design relies on the eigenvalue spectrum of the approximate Hessian matrix, but this technique is computationally too expensive for practical use. A more affordable goodness measure has been proposed in the past, but we demonstrate that this measure is inappropriate for target‐oriented optimized experimental design. To address those issues, we derived a sequential receiver‐based procedure using a goodness measure based on the determinant of the approximate Hessian matrix. We show with numerical tests that it efficiently provides an optimized design for target‐oriented as well as for extensive full waveform inversion. This design allows a better reconstruction of the subsurface than an evenly spaced acquisition geometry. Furthermore, the optimization algorithm itself can easily be parallelized, therefore making it attractive for applications to large‐scale three‐dimensional surveys. In addition, our algorithm is able to incorporate variable costs, representing any kind of acquisition‐related costs, for every individual source location. The combined optimization with respect to the information content of sources and to the true cost will allow a more comprehensive and realistic survey planning and has a high potential for further applications.