The GREGOR Fabry‐Pérot Interferometer

The GREGOR Fabry‐Pérot Interferometer (GFPI) is one of three first‐light instruments of the German 1.5‐meter GREGOR solar telescope at the Observatorio del Teide, Tenerife, Spain. The GFPI uses two tunable etalons in collimated mounting. Thanks to its large‐format, high‐cadence CCD detectors with sophisticated computer hard‐ and software it is capable of scanning spectral lines with a cadence that is sufficient to capture the dynamic evolution of the solar atmosphere. The field‐of‐view (FOV) of 50″×38″is well suited for quiet Sun and sunspot observations. However, in the vector spectropolarimetric mode the FOV reduces to 25″×38″. The spectral coverage in the spectroscopic mode extends from 530–860 nm with a theoretical spectral resolution of R ≈250 000, whereas in the vector spectropolarimetric mode the wavelength range is at present limited to 580–660 nm. The combination of fast narrow‐band imaging and post‐factum image restoration has the potential for discovery science concerning the dynamic Sun and its magnetic field at spatial scales down to ∼50 km on the solar surface (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Telescope calibration using polarization calibration data

This article describes the use of the telescope output Stokes vector measured during a polarization calibration to infer the properties of mirrors in the telescope itself. Polarization calibrations performed at the National Solar Observatory Dunn Solar Telescope are used to demonstrate this technique (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The 1.5 meter solar telescope GREGOR

The 1.5 m telescope GREGOR opens a new window to the understanding of solar small‐scale magnetism. The first light instrumentation includes the Gregor Fabry Pérot Interferometer (GFPI), a filter spectro‐polarimeter for the visible wavelength range, the GRating Infrared Spectro‐polarimeter (GRIS) and the Broad‐Band Imager (BBI). The excellent performance of the first two instruments has already been demonstrated at the Vacuum Tower Telescope. GREGOR is Europe’s largest solar telescope and number 3 in the world. Its all‐reflective Gregory design provides a large wavelength coverage from the near UV up to at least 5 microns. The field of view has a diameter of 150″. GREGOR is equipped with a high‐order adaptive optics system, with a subaperture size of 10 cm, and a deformable mirror with 256 actuators. The science goals are focused on, but not limited to, solar magnetism. GREGOR allows us to measure the emergence and disappearance of magnetic flux at the solar surface at spatial scales well below 100 km. Thanks to its spectro‐polarimetric capabilities, GREGOR will measure the interaction between the plasma flows, different kinds of waves, and the magnetic field. This will foster our understanding of the processes that heat the chromosphere and the outer layers of the solar atmosphere. Observations of the surface magnetic field at very small spatial scales will shed light on the variability of the solar brightness (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Imaging magnetographs for high‐resolution solar observations in the visible and near‐infrared wavelength region

The Coudé feed of the vacuum telescope (aperture D = 65 cm) at the Big Bear Solar Observatory (BBSO) is currently completely remodelled to accommodate a correlation tracker and a high‐order Adaptive Optics (AO) system. The AO system serves two imaging magnetograph systems located at a new optical laboratory on the observatory's 2^nd floor. The InfraRed Imaging Magnetograph (IRIM) is an innovative magnetograph system for near‐infrared (NIR) observations in the wavelength region from 1.0 μm to 1.6 μm. The Visible‐light Imaging Magnetograph (VIM) is basically a twin of IRIM for observations in the wavelength range from 550 nm to 700 nm. Both instruments were designed for high spatial and high temporal observations of the solar photosphere and chromosphere. Real‐time data processing is an integral part of the instruments and will enhance BBSO's capabilities in monitoring solar activity and predicting and forecasting space weather.     

On the design of the PEPSI spectropolarimeter for the LBT

We present the design concept of the spectropolarimeter for the high‐resolution echelle spectrograph PEPSI tobe installed at the 2 × 8.4 m Large Binocular Telescope (LBT) in Arizona. We discuss the optical key elements, the principles of operations of the instrument and its instrumental polarization effects (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spectro‐polarimetry in the era of large solar telescopes

This paper discusses some of the challenges of spectro‐polarimetric observations with a large aperture solar telescope such as the ATST or the EST. The observer needs to reach a compromise between spatial and spectral resolution, time cadence, and signal‐to‐noise ratio, as only three of those four parameters can be pushed to the limit. Tunable filters and grating spectrographs provide a natural compromise as the former are more suitable for high‐spatial resolution observations while the latter are a better choice when one needs to work with many wavelengths at full spectral resolution. Given the requirements for the new science targeted by these facilities, it is important that 1) tunable filters have some multi‐wavelength capability; and 2) grating spectrographs have some 2D field of view (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hopes and expectations with GREGOR

This contribution to the series of GREGOR inauguration articles addresses the history of the GREGOR telescope. It was obvious since a long time that the study of the atmospheric dynamics on the Sun needs telescopes with a large aperture. So the first plans to replace the 40 years old Gregory‐Coudé Telescope, with its 45 cm primary mirror, by a large, 1.5‐meter telescope date back to 1997. After a positive review of the project by the Deutsche Forschungsgemeinschaft in 2000, the large financial support started in 2000. Unfortunately, the new technology of the Cesic mirrors was not yet ripe to produce the large primary mirror with this light‐weight material. So, the project was much delayed. After recollecting for the reader several dates, I also go through some properties of GREGOR. I recall the aims of the project and discuss difficulties and ways to realise the intentions (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Night‐time science with large solar telescopes: The magnetic Sun through time

Today the Sun has a regular magnetic cycle driven by a dynamo action. But how did this regular cycle develop? How do basic parameters such as rotation rate, age, and differential rotation affect the generation of magnetic fields? Zeeman Doppler imaging (ZDI) is a technique that uses high‐resolution observations in circularly polarised light to map the surface magnetic topology on stars. Utilising the spectropolarimetric capabilities of future large solar telescopes it will be possible to study the evolution and morphology of the magnetic fields on a range of Sun‐like stars from solar twins through to rapidly‐rotating active young Suns and thus study the solar magnetic dynamo through time. In this article I discuss recent results from ZDI of Sun‐like stars and how we can use night‐time observations from future solar telescopes to solve unanswered questions about the origin and evolution of the Sun's magnetic dynamo (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A synoptic program for large solar telescopes: Cyclic variation of turbulent magnetic fields

Upcoming large solar telescopes will offer the possibility of unprecedented high resolution observations. However, during periods of non‐ideal seeing such measurements are impossible and alternative programs should be considered to best use the available observing time. We present a synoptic program, currently carried out at the Istituto Ricerche Solari Locarno (IRSOL), to monitor turbulent magnetic fields employing the differential Hanle effect in atomic and molecular lines. This program can be easily adapted for the use at large telescopes exploring new science goals, nowadays impossible to achieve with smaller telescopes. The current, interesting scientific results prove that such programs are worthwhile to be continued and expanded in the future. We calculate the approximately achievable spatial resolution at a large telescope like ATST for polarimetric measurements with a noise level below 5 × 10^‐5 and a temporal resolution which is sufficient to explore variations on the granular scale. We show that it would be important to optimize the system for maximal photon throughput and to install a high‐speed camera system to be able to study turbulent magnetic fields with unprecedented accuracy (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

GREGOR solar telescope: Design and status

The integration and verification phase of the GREGOR telescope reached an important milestone with the installation of the interim 1 m SolarLite primary mirror. This was the first time that the entire light path had seen sunlight. Since then extensive testing of the telescope and its subsystems has been carried out. The integration and verification phase will culminate with the delivery and installation of the final 1.5 m Zerodur primary mirror in the summer of 2010. Observatory level tests and science verification will commence in the second half of 2010 and in 2011. This phase includes testing of the main optics, adaptive optics, cooling and pointing systems. In addition, assuming the viewpoint of a typical user, various observational modes of the GREGOR Fabry‐Pérot Interferometer (GFPI), the Grating Infrared Spectrograph (GRIS), and high‐speed camera systems will be tested to evaluate if they match the expectations and science requirements. This ensures that GREGOR will provide high‐quality observations with its combination of (multi‐conjugate) adaptive optics and advanced post‐focus instruments. Routine observations are expected for 2012 (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A generalized measurement equation and van Cittert-Zernike theorem for wide-field radio astronomical interferometry

We derive a generalized van Cittert-Zernike (vC-Z) theorem for radio astronomy that is valid for partially polarized sources over an arbitrarily wide field of view (FoV). The classical vC-Z theorem is the theoretical foundation of radio astronomical interferometry, and its application is the basis of interferometric imaging. Existing generalized vC-Z theorems in radio astronomy assume, however, either paraxiality (narrow FoV) or scalar (unpolarized) sources. Our theorem uses neither of these assumptions, which are seldom fulfiled in practice in radio astronomy, and treats the full electromagnetic field. To handle wide, partially polarized fields, we extend the two-dimensional (2D) electric field (Jones vector) formalism of the standard 'Measurement Equation' (ME) of radio astronomical interferometry to the full three-dimensional (3D) formalism developed in optical coherence theory. The resulting vC-Z theorem enables full-sky imaging in a single telescope pointing, and imaging based not only on standard dual-polarized interferometers (that measure 2D electric fields) but also electric tripoles and electromagnetic vector-sensor interferometers. We show that the standard 2D ME is easily obtained from our formalism in the case of dual-polarized antenna element interferometers. We also exploit an extended 2D ME to determine that dual-polarized interferometers can have polarimetric aberrations at the edges of a wide FoV. Our vC-Z theorem is particularly relevant to proposed, and recently developed, wide FoV interferometers such as Low Frequency Array (LOFAR) and Square Kilometer Array (SKA), for which direction-dependent effects will be important.     

PAOLO: A Polarimeter Add‐On for the LRS Optics at a Nasmyth focus of the TNG

We describe a new polarimetric facility available at the Istituto Nazionale di AstroFisica / Telescopio Nazionale Galileo at La Palma, Canary islands. This facility, PAOLO (Polarimetric Add‐On for the LRS Optics), is located at a Nasmyth focus of an alt‐az telescope and requires a specific modeling in order to remove the time‐ and pointing position‐dependent instrumental polarization. We also describe the opto‐mechanical structure of the instrument and its calibration and present early examples of applications. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Instrument and data analysis challenges for imaging spectropolarimetry

The next generation of solar telescopes will enable us to resolve the fundamental scales of the solar atmosphere, i.e., the pressure scale height and the photon mean free path. High‐resolution observations of small‐scale structures with sizes down to 50 km require complex post‐focus instruments, which employ adaptive optics (AO) and benefit from advanced image restoration techniques. The GREGOR Fabry‐Pérot Interferometer (GFPI) will serve as an example of such an instrument to illustrate the challenges that are to be expected in instrumentation and data analysis with the next generation of solar telescopes (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Second‐order error propagation in the Mueller matrix of a spectropolarimeter

Accurate measurements of Stokes IQUV in spectral lines is required for precise reconstruction of stellar magnetic field geometries with Zeeman‐Dopper imaging. Spectral Zeeman features are intrinsically weak and subjected to a number of instrumental uncertainties. The aim of this work is to study the details of the instrumental uncertainties in the Stokes IQUV measurements in spectral lines and ways of their reduction. We make a practical comparison of the polarimetric performances of two high‐resolution échelle spectropolarimeters, namely SOFIN at the NOT, and HARPS at ESO. We show the residual spectra for both instruments to characterize the cross‐talk between the observed Stokes parameters. We employ a self‐calibrating least‐squares fit to eliminate some of the polarization uncertainties to derive the full Stokes vector from stellar spectra (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The GREGOR Broad‐Band Imager

The design and characteristics of the Broad‐Band Imager (BBI) of GREGOR are described. BBI covers the visible spectral range with two cameras simultaneously for a large field and with critical sampling at 390 nm, and it includes a mode for observing the pupil in a Foucault configuration. Samples of first‐light observations are shown (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A retrospective of the GREGOR solar telescope in scientific literature

In this review, we look back upon the literature, which had the GREGOR solar telescope project as its subject including science cases, telescope subsystems, and post‐focus instruments. The articles date back to the year 2000, when the initial concepts for a new solar telescope on Tenerife were first presented at scientific meetings. This comprehensive bibliography contains literature until the year 2012, i.e., the final stages of commissioning and science verification. Taking stock of the various publications in peer‐reviewed journals and conference proceedings also provides the “historical” context for the reference articles in this special issue of Astronomische Nachrichten/Astronomical Notes (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The GREGOR adaptive optics system

The new 1.5‐m German solar telescope GREGOR at the Observatorio del Teide, Tenerife, is equipped with an integrated adaptive optics system. Although partly still in the commissioning phase, the system is already being used used for most science observations. It is designed to provide diffraction‐limited observations in the visible‐light regime for seeing better than 1.2″. We describe the AO system including the optical design, software, wavefront reconstruction, and performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Interpretation of observations by inversion

The most recent developments in inversion techniques of the radiative transfer equation are critically reviewed and some of their findings are summarized to illustrating their achievements. Two significantly different approaches are currently being used that deserve consideration, each characterized by whether or not the model solar atmospheres are changed iteratively by the algorithm. The comparison between the two may help in finding future inversion techniques that can solve many challenging problems of solar physics that still need to be properly settled. These problems themselves suggest strategies that look more suitable than others.