Basalt magma genesis and fractionation in collision- and extension-related provinces: A comparison between eastern, central and western Anatolia

Experimental studies of synthetic and natural basalt systems suggest that conditions of magma genesis and fractionation depend fundamentally on mantle temperatures and lithospheric stress fields. In general, compressional settings are more conducive to polybaric fractionation than extensional settings and in this regard, the Anatolian magmatic province offers a natural laboratory for comparing near-coeval basalt eruptions as a function of regional tectonics — compressional (collision-related) régimes dominating in eastern Anatolia and extensional tectonics characterizing a western province related to Aegean Sea opening. Projection of Plio-Quaternary basalt normative compositions from the Western Anatolia Extensional Province (WAEP), the Central Anatolian ‘Ova’ Province (CAOP), and Eastern Anatolia Compressional Province (EACP) are projected onto Ol–Ne–Cpx and Pl–Cpx–Ol planes in the simplified basalt system (Ne–Cpx–Ol–Qz), each showing distinctive liquid lines of descent. WAEP basalts are mostly constrained by low-pressure (< 0.5 GPa) cotectics while CAOP and EACP compositions conform to moderate and/or high-pressure (0.8–3.0 GPa) cotectics. Overall, a quasi-linear shift from moderate and/or high-pressure to low-pressure equilibria matches the westward transgression from compressional east Anatolia to the extensional west Anatolian–Aegean region. Comparison of their respective primary (mantle-equilibrated) magmas–simulated by normalizing their compositions to MgO = 15 wt.% (Mg-15)–with parameterized anhydrous and H₂O-undersaturated experimental melts suggests they segregated from spinel- to garnet-lherzolite mantle facies at pressures between c. 2 and 3 GPa (c. 70–100 km depth) under H₂O-undersaturated conditions. Interpolated potential temperatures (T_p) and lithospheric stretching factors (β) range as follows: (1) eastern Anatolian basalts associated with the Arabian foreland show T_p varying between 1250 and 1400 °C (except for the Karacalidag alkali basalts, south of the Bitlis–Zagros fracture zone, for which T_p ranges up to 1450 °C), for β values of 1.2–1.8. T_p values for central Anatolia (e.g. Sivas) range between 1300 and 1375 °C (except for Karapinar, Egrikuyu and Hasandag, which show < 1150 °C), and β values of 1.3–1.4. For western Anatolian basalts, T_p range mostly between 1250 and 1330 °C, except for a single value for Canakkale of 1400 °C and Kula sample showing T_p < 1200 °C, and β values of 1.3–2.0. Variation of these conditions is as great or greater than that between provinces, although there are clearly significant constraints on the inferred polybaric to low-pressure isobaric fractionation régimes. Covariation of total FeO, TiO₂, La/Yb, Ce/Sm, Zr/Y and Zr/Nb reflects small but significant differences in bulk composition and ambient melt fraction while the covariance of Ce/Sm and Sm/Yb is consistent with the segregation of primitive melts at the spinel- to garnet-lherzolite transition.     

Ultra high temperature-metamorphism and its significance in the Central Indian Tectonic Zone

In the present study from the southern margin of the Central Indian Tectonic Zone, it is demonstrated how the metamorphic P–T path of ultrahigh-temperature granulite terranes can be reconstructed using the metamorphic transition in corundum granulites from early biotite melting to later FMAS solid–solid reaction. The extreme metamorphism in these rocks caused two-stage biotite melting, resulting in initial porphyroblastic garnet₁ and later sapphirine–spinel₁ incongruent solid mineral assemblages. During this process, the leucocratic and melanocratic layers in the corundum granulites evolved from an initial silica-oversaturated to a later silica-undersaturated domain. In the melanocratic layer, this allowed localized concentration of sapphirine-spinel₁ and residual sillimanite₁, producing an extremely restitic assemblage, at the culmination of peak metamorphism, BM₁. BM₁ is constrained at  1000 °C at relatively deep crustal levels (P  9 kbar) from the stability of ferroaugite in a co-metamorphosed Iron Formation granulite. During subsequent metamorphism (BM₂), the reaction path and history in the corundum granulites shifted to the restitic domain allowing reacting sapphirine, spinel₁ and sillimanite to produce coronal garnet₂–corundum assemblage via a FMAS univariant reaction. In the final stages of reaction history, biotite₂–sillimanite₂–spinel₂ assemblage was produced after garnet₂–corundum due to localized melt–crystal interaction. The metamorphic sequence, when interpreted with the help of a newly constructed, qualitative KFMASH petrogenetic grid, reveals successive stages of heating, increasing pressure and cooling around the KFMASH invariant point, [Opx,Crd], which is consistent with a counterclockwise metamorphic P–T path. The near isobaric nature of post-peak cooling (ΔT  250–300 °C) is also evident from multistage pyroxene exsolution and by the appearance of lamellar and coronal garnets in the Iron Formation granulites. This study provides the first tight constraint for ultrahigh-T metamorphism along a counter clockwise P–T trajectory in the Central Indian Tectonic zone, and has important bearing for terrane correlations in this part of East Gondwanaland. In addition, the new KFMASH grid allows evaluation of metamorphic phase relations in ultrahigh-T, corundum-bearing and corundum-absent aluminous granulites.     

Spinel–sapphirine–quartz bearing composite inclusion within garnet from an ultrahigh-temperature pelitic granulite: Implications for metamorphic history and P–T path

We report here a multiphase mineral inclusion composed of quartz, plagioclase, K-feldspar, sapphirine, spinel, orthopyroxene, and biotite, in porphyroblastic garnet within a pelitic granulite from Rajapalaiyam in the Madurai Granulite Block, southern India. In this unique textural association, hitherto unreported in previous studies, sapphirine shows four occurrences: (1) as anhedral mineral between spinel and quartz (Spr-1), (2) subhedral to euhedral needles mantled by quartz (Spr-2), (3) subhedral to anhedral mineral in orthopyroxene, and (4) isolated inclusion with quartz (Spr-4). Spr-1, Spr-2, and Spr-4 show direct grain contact with quartz, providing evidence for ultrahigh-temperature (UHT) metamorphism at temperatures exceeding 1000 °C. Associated orthopyroxene shows high Mg/(Fe + Mg) ratio ( 0.75) and Al₂O₃ content (up to 9.6 wt.%), also suggesting T > 1050 °C and P > 10 kbar during peak metamorphism.

Coarse spinel (Spl-1) with irregular grain morphology and adjacent quartz grains are separated by thin films of Spr-1 and K-feldspar, suggesting that Spl-1 and quartz were in equilibrium before the stability of Spr-1 + quartz. This texture implies that the P–T conditions of the rock shifted from the stability field of spinel + quartz to sapphirine + quartz. Petrogenetic grid considerations based on available data from the FMAS system favour exhumation along a counterclockwise P–T trajectory. The irregular shape of the inclusion and chemistry of the inclusion minerals are markedly different from the matrix phases suggesting the possibility that the inclusion minerals could have equilibrated from cordierite-bearing silicate-melt pockets during the garnet growth at extreme UHT conditions.     

Implications of super dense carbonic and hypersaline fluid inclusions in granites from the Ranchi area, Chottanagpur Gneissic Complex, Eastern India

A combined fluid inclusion and mineral thermobarometric study in groups of synchronous inclusions in quartz within weakly foliated granites from the Chottanagpur Gneissic Complex, India, reveals super dense carbonic (CO₂ with minor CH₄ and H₂O) inclusions and hypersaline (H₂O–NaCl ± NaHCO₃) inclusions, with halite- and nahcolite daughter phases. This study documents the highest density (1.115 g cm^− 3) CO₂ fluids ever reported in granites. Fluid isochores, constructed from CO₂ (± CH₄) and halite-bearing inclusions, coupled with two-feldspar thermometry constrain the minimum P–T at 8 kbar/ 750 °C for fluid entrapment in granites. By contrast, the carbonic inclusions in quartz from granite-hosted metapelite enclaves contain substantial CH₄ (up to 30 mol%), and the entrapment pressure ( 4.3 kbar/600 °C) is considerably lower compared to those in the granites. By implication, the sillimanite-free granites were not derived from the metapelitic enclaves, and instead were formed by partial melting of fluid-heterogeneous lower crustal protoliths, with fluid entrapment at magmatic conditions.     

Experimental study of the joins forsterite–diopside–leucite– and forsterite–leucite–åkermanite up to 2.3 GPa [P(H2O) = P(Total)] and variable temperatures: Its petrological significance

We conducted a series of melting experiments in the join forsterite–diopside–leucite under 0.1 and 2.3 GPa and in the join forsterite–leucite–åkermanite under 2.3 GPa to understand paragenetic relationships amongst different types of lamproitic and lamprophyric magmas with K-rich mafic and ultramafic volcanic (kamafugitic) rocks. Both the joins were studied in the presence of excess water. The experimental results of the join forsterite–diopside–leucite at 0.1 GPa show that the five-phase point of forsterite (Fo)_ss + diopside (Di)_ss + leucite (Lc)_ss + liquid (Liq) + vapour (V) (equivalent to ugandite lava) occurs at Fo₂Di₅₀Lc₄₈ at 880 ± 5 °C. Phlogopite appears as the last phase at 830 ± 15 °C. The final crystalline assemblage of forsterite_ss + diopside_ss + leucite_ss + phlogopite is similar to the phenocryst assemblage of missourite lava. Present study suggests that an olivine leucitite (ugandite) can be derived from an olivine italite, a slightly potassic peridotite and a leucitite magma.

A study of the join Fo–Di–Lc [P(H₂O) = P(Total)] at 2.3 GPa shows that liquid compositions penetrate the primary phase volumes of forsterite_ss, phlogopite_ss, kalsilitess, K-feldspar_ss and diopside_ss. It has the following three five-phase points: 1) one occurring at Fo₉Di₄₉Lc₄₂ and 1005 ± 5 °C, where liquid and vapour coexists with forsterite_ss, phlogopite_ss and diopside_ss (phlogopite-bearing madupite), 2) the second one at Fo₄Di₅₀Lc₄₆ and 990 ± 10 °C, where diopside_ss, K-feldspar_ss and phlogopite_ss coexist with liquid and vapour (pyroxene-bearing minette), and 3) the third one at Fo₃Di₂₁Lc₇₆ and 775 ± 5 °C, where phlogopite_ss, kalsilite_ss and K-feldspar_ss are in equilibrium with liquid plus vapour (kalsilite-bearing minette).

The experimental results of the join Fo–Lc–åkermanite (Ak) show that the join 40 penetrates the primary phase volumes of forsterite_ss, phlogopite_ss, kalsilite, K-feldspar_ss, diopside_ss and merwinite_ss. The data indicate the presence of four five-phase points: 1) one occurring at Fo₇Lc₄₂Ak₅₁ and 1165 ± 5 °C, where phlogopite_ss, forsterite_ss, diopside_ss coexists with liquid and vapour (olivine-bearing madupite), 2) the second one at Fo₃Lc₄₉Ak₄₈ and 1140 ± 10 °C, where a liquid is in equilibrium with phlogopite_ss, K-feldspar_ss, diopside_ss and vapour (pyroxene-bearing minette), 3) the third one at Fo₁₈Lc₂₁Ak₆₁ and 1255 ± 10 °C, where merwinite_ss, forsterite_ss and diopside_ss are in equilibrium with liquid and vapour (merwinite-bearing wherlite), and 4) the fourth one at Fo₅Lc_73.5Ak_21.5 and 770 ± 5 °C, where kalsilite_ss, phlogopite_ss and K-feldspar coexist with liquid and vapour (kalsilite-bearing minette). The present data suggest that high pressure heteromorphic equivalent of a katungite magma is represented by a kalsilite-bearing minette, a pyroxene-bearing minette, or an olivine-bearing madupite.     

Petrogenesis of Al–silicate-bearing trondhjemitic migmatites from NE Sardinia, Italy

The migmatites from Punta Sirenella (NE Sardinia) are layered rocks containing 3–5 vol.% of centimeter-sized stromatic leucosomes which are mainly trondhjemitic and only rarely granitic in composition. They underwent three deformation phases, from D₁ to D₃. The D₁ deformation shows a top to the NW shear component followed by a top to the NE/SE component along the XZ plane of the S₂ schistosity. Migmatization started early, during the compressional and crustal thickening stage of Variscan orogeny and was still in progress during the following extensional stage of unroofing and exhumation.

The trondhjemitic leucosomes, mainly consisting of quartz, plagioclase, biotite ± garnet ± kyanite ± fibrolite, retrograde muscovite and rare K-feldspar, are locally bordered by millimeter-sized biotite-rich melanosomes. The rare granitic leucosomes differ from trondhjemitic ones only in the increase in modal content of K-feldspar, up to 25%. Partial melting started in the kyanite field at about 700–720 °C and 0.8–0.9 GPa, and was followed by re-equilibration at 650–670 °C and 0.4–0.6 GPa, producing fibrolite–biotite intergrowth and coarse-grained muscovite.

The leucosomes have higher SiO₂, CaO, Na₂O, Sr and lower Al₂O₃, Fe₂O₃, MgO, TiO₂, K₂O, P₂O₅, Rb, Ba, Cr, V, Zr, Nb, Zn and REE content with respect to proximal hosts and pelitic metagreywackes. Sporadic anomalous high content of calcium and ferromagnesian elements in some leucosomes is due to entrainment of significant amounts of restitic plagioclase, biotite and accessory phases. The rare granitic leucosomes reveal peritectic K-feldspar produced by muscovite-dehydration melting. Most leucosomes show low REE content, moderately fractionated REE patterns and marked positive Eu anomaly. Proximal hosts and pelitic metagraywackes are characterized by higher REE content, more fractionated REE patterns and slightly negative Eu anomaly.

The trondhjemitic leucosomes were generated by H₂O-fluxed melting at 700 °C of a greywacke to pelitic–greywacke metasedimentary source-rock. The disequilibrium melting process is the most reliable melting model for Punta Sirenella leucosomes.     

Age and emplacement of late-Variscan granites of the western Bohemian Massif with main focus on the Hauzenberg granitoids (European Variscides, Germany)

The Variscan Hauzenberg pluton consists of granite and granodiorite that intruded late- to postkinematically into HT-metamorphic rocks of the Moldanubian unit at the southwestern margin of the Bohemian Massif (Passauer Wald). U–Pb dating of zircon single-grains and monazite fractions, separated from medium- to coarse-grained biotite-muscovite granite (Hauzenberg granite II), yielded concordant ages of 320 ± 3 and 329 ± 7 Ma, interpreted as emplacement age. Zircons extracted from the younger Hauzenberg granodiorite yielded a ²⁰⁷Pb–²⁰⁶Pb mean age of 318.6 ± 4.1 Ma. The Hauzenberg granite I has not been dated. The pressure during solidification of the Hauzenberg granite II was estimated at 4.6 ± 0.6 kbar using phengite barometry on magmatic muscovite, corresponding to an emplacement depth of 16-18 km. The new data are compatible with pre-existing cooling ages of biotite and muscovite which indicate the Hauzenberg pluton to have cooled below T = 250–400 °C in Upper Carboniferous times. A compilation of age data from magmatic and metamorphic rocks of the western margin of the Bohemian Massif suggests a west- to northwestward shift of magmatism and HT/LP metamorphism with time. Both processes started at > 325 Ma within the South Bohemian Pluton and magmatism ceased at ca. 310 Ma in the Bavarian Oberpfalz. The slight different timing of HT metamorphism in northern Austria and the Bavarian Forest is interpreted as being the result of partial delamination of mantle lithosphere or removal of the thermal boundary layer.     

Metamorphic evolution, mineral chemistry and thermobarometry of schists and orthogneisses hosting ultra-high pressure eclogites in the Dabieshan of central China

As is typical of ultra-high pressure (UHP) terrains, the regional extent of the UHP terrain in the Dabieshan of central China is highly speculative, since the volume of eclogites and paragneisses preserving unequivocal evidence of coesite and/or diamond stability is very small. By contrast, the common garnet (X_Mn=0.18–0.45)–phengite (Si=3.2–3.35)–zoned epidote (Ps_38–97)–biotite–titanite–two feldspars–quartz assemblages in the more extensive orthogneisses have been previously thought to have formed under low P–T conditions of ca. 400±50°C at 4 kbar. However, certain orthogneiss samples preserve garnets with X_Ca up to 0.50, rutile inclusions within titanite or epidote and relict phengite inclusions within epidote with Si contents p.f.u. of up to 3.49 — overlapping with the highest values (3.49–3.62) recorded for phengites in samples of undoubted UHP schists. These and other mineral composition features (such as A-site deficiencies in the highest Si phengites, Na in garnets linked to Y+Yb substitution and Al F Ti₋₁ O₋₁ substitution in titanites) are taken to be pointers towards the orthogneisses having experienced a similar metamorphic evolution to the associated UHP schists and eclogites. Re-evaluated garnet–phengite and garnet–biotite Fe/Mg exchange thermometry and calculated 5 rutile+3 grossular+2SiO₂+H₂O=5 titanite+2 zoisite equilibria indicate that the orthogneisses may indeed have followed a common subduction-related clockwise P–T path with the UHP paragneisses and eclogites through conditions of P_max at ca. 690°C–715°C and 36 kbar to T_max at ca. 710°C–755°C and 18 kbar, prior to extensive re-crystallisation and re-equilibration of these ductile orthogneisses at ca. 400°C–450°C and 6 kbar. The consequential conclusion, that it is no longer necessary to resort to models of tectonic juxtapositioning to explain the spatial association of these Dabieshan orthogneisses with undoubted UHP lithologies, has far-reaching implications for the interpretation of controversial gneiss–eclogite relationships in other UHP metamorphic terrains.     

Evolution of mineral–fluid interfaces studied at pressure with synchrotron X-ray techniques

In situ measurements of mineral surface evolution during the process of pressure solution are possible with the high brightness of synchrotron X-ray sources. This capability has been explored through the use of newly developed reaction vessels that allow transmission of the incident and scattered X-ray beam through a low atomic weight piston. Several new vessels are described, along with details of computational algorithms that are used to simulate X-ray scattering in this unconventional geometry. Results using calcite (CaCO₃) and halite (NaCl) as reactant crystals are presented and compared to other atomic-scale measurements of surface dissolution processes. Calcite was reacted with an unsaturated fluid at 30 bars of pressure for approximately 24 h. During reaction the root mean square surface roughness (σ) evolved from 13.7 Å (± 0.5 Å) to 19.5 Å (± 1.0 Å), giving a roughening rate of: dσ/dt = +6.3 × 10^− 5 Å s^− 1. This is consistent with other measurements made with free calcite surfaces and is driven almost entirely by chemical disequilibrium. Analysis of the surface ex situ post-reaction gives an identical σ value, showing that the in situ measurements are well-constrained. Experiments also at 30 bars but in a saturated solution indicate that the calcite surface does not significantly roughen, giving the result that pressure solution of calcite at this pressure cannot be monitored in experiments of several days duration. Experiments with halite, a much more reactive phase, in saturated solutions showed the reflectivity profile to be dynamic on a time scale of hours. This experiment was left to reach equilibrium over 108 days and then re-analyzed, showing that σ had increased from 34 Å (± 2 Å) to 41 Å (± 2 Å), giving a roughening rate of: dσ/dt ≤ +6.4 × 10^− 7 Å s^− 1. This is two orders of magnitude smaller than the calcite roughening rate caused by chemical disequilibrium and provides the first direct in situ atomic-scale measurement of the rate of surface roughening due to pressure solution.     

Petrogenesis of A-type granites and origin of vertical zoning in the Katharina pluton, Gebel Mussa (Mt. Moses) area, Sinai, Egypt

The central pluton within the Neoproterozoic Katharina Ring Complex (area of Gebel Mussa, traditionally believed to be the biblical Mt. Sinai) shows a vertical compositional zoning: syenogranite makes up the bulk of the pluton and grades upwards to alkali-feldspar granites. The latters form two horizontal subzones, an albite–alkali feldspar (Ab–Afs) granite and an uppermost perthite granite. These two varieties are chemically indistinguishable. Syenogranite, as compared with alkali-feldspar granites, is richer in Ca, Sr, K, Ba and contains less SiO₂, Rb, Y, Nb and U; Eu/Eu* values are 0.22–0.33 for syenogranite and 0.08–0.02 for alkali-feldspar granites. The δ¹⁸O (Qtz) is rather homogeneous throughout the pluton, 8.03–8.55‰. The δ¹⁸O (Afs) values in the syenogranite are appreciably lower relative to those in the alkali–feldspar granites: 7.59–8.75‰ vs. 8.31–9.12‰. A Rb–Sr isochron (n = 9) yields an age of 593 ± 16 Ma for the Katharina Ring Complex (granite pluton and ring dikes).

The alkali–feldspar granites were generated mainly by fractional crystallization of syenogranite magma. The model for residual melt extraction and accumulation is based on the estimated extent of crystallization ( 50 wt.%), which approximates the rigid percolation threshold for silicic melts. The fluid-rich residual melt could be separated efficiently by its upward flow through the rigid clusters of crystal phase. Crystallization of the evolved melt started with formation of hypersolvus granite immediately under the roof. Fluid influx from the inner part of the pluton to its apical zone persisted and caused increase of P_H2O in the magma below the perthite granite zone. Owing to the presence of F and Ca in the melt, P_H2O of only slightly more than 1 kbar allows crystallization of subsolvus Ab–Afs granite. Abundance of turbid alkali feldspars and their ¹⁸O/¹⁶O enrichment suggest that crystallization of alkali-feldspar granites was followed by subsolvus fluid–rock interaction; the δ¹⁸O (Fsp) values point to magmatic origin of fluids.

The stable and radiogenic isotope data [δ¹⁸O (Zrn) = 5.82 ± 0.06‰, I_Sr = 0.7022 ± 0.0064, ε_Nd (T) values are + 3.6 and + 3.9] indicate that the granite magma was generated from a ‘juvenile’ source, which is typical of the rocks making up most of the Arabian–Nubian shield.     

Origin of lamprophyres by the mixing of basic and alkaline melts in magma chamber in Beiya area, western Yunnan, China

Lamprophyres consisting mainly of diopside, phlogopite and K-feldspar formed in the early Tertiary around 60 Ma in the Beiya area and are characterized by low SiO₂ ± 46–50 wt.%), Rb (31–45 ppm) and Sr (225–262 ppm), high Al₂O₃, (11.2–13.1 wt.%), CaO (8.0–8.7 wt.%), MgO (11.5–12.1 wt.%), K₂O(4.9–5.5 wt.%), TiO₂ (2.9–3.3 wt.%) and REE (174–177 ppm), and compatible elements (e.g. Sc, Cr and Ni) and HSF elements (e.g. Th, U, Zr, Nb, Ta, Ti and Y), and low ¹⁴³Nd/¹⁴⁴Nd 0.512372–0.512536, middle ⁸⁷Sr/⁸⁶Sr 0.707322–0.707395, middle ²⁰⁶Pb/²⁰⁴Pb 18.50–18.59, ²⁰⁷Pb/²⁰⁴Pb 15.60–15.65 and ²⁰⁸Pb/²⁰⁴Pb 38.75–38.8. These rocks developed peculiar quartz megacrysts with poly-layer reaction zones, melt inclusions, and partial melted K-feldspar and plagioclase inclusions, and plastic shapes. Important features of these rocks include: (1) hybrid composition of elements, (2) abrupt increase of SiO₂ content of the melt, recorded by zoned diopside, (3) development of sanidine and aegirine-augite reaction zones, (4) alkaline melt and partial melted K-feldspar and plagioclase inclusions, (5) deformed quartz inclusions associated with quartz megacrysts, (6) the presence of quartz megacrysts in plastic shape with their parent melts, (7) the occurrence of olivine, high-MgO ilmenite and spinel inclusions within earlier formed diopside, phlogopite and magnetite. Median ⁸⁷Sr/⁸⁶Sr values between Tertiary alkaline porphyries in the Beiya area and the western Yunnan and Tertiary basalt in the western Yunnan indicate that the Beiya lamprophyre melts were derivative and resulted from the mixing between basic melts that were related to the partial melting of phenocrysts of spinel iherzolite from a mantle source. The alkaline melts originated from partial melting along the Jinshajiang subduction ductile shear zone at the contact between the buried Palaeo-Tethyan oceanic lithosphere and the upper mantle lithosphere. The alkaline melts are composed of 65% sanidine (Or₇₀Ab₂₈An₂) and 35% SiO₂. The melt mixing occurred in magma chambers in the middle-shallow crust at 8–10 km before the derivative lamprophyre melts intruded into the shallow cover in Beiya area. This mixing of basic and alkaline melts might represent a general process for the formation of lamprophyre in the western Yunnan.     

Kyanite eclogite xenolith from the orthogneiss terrane of the Tisza Megaunit, Jánoshalma area, crystalline basement of southern Hungary

New evidence for high-pressure, eclogite facies metamorphism in the crystalline basement of the Tisza Megaunit (southern Hungary) is reported. The retrogressed mafic eclogite forms a small lens in the orthogneiss and it was found in the borehole near Jánoshalma. The carbonated eclogite contains the peak metamorphic assemblage omphacite + garnet + phengite + kyanite + clinozoizite + rutile + K-feldspar + quartz. Omphacite (Xjd_0.40–0.41Xdio_0.52–0.53Xhd_0.05Xaug_1.55–2.85) occurs in the matrix and as inclusions in garnet (Xpy_0.37–0.38Xgrs_0.21–0.22Xalm_0.39–0.40Xsps_0–0.01Xadr_0–0.01) and kyanite. Thermobarometry based on net-transfer reactions between garnet, omphacite, kyanite and phengite yields P–T conditions of 710 ± 10 °C and 2.6 ± 0.75 GPa. Retrogression during decompression is manifested by formation of symplectites; the most typical are diopside + plagioclase after omphacite, corundum + spinel + plagioclase after kyanite and biotite + plagioclase after phengite. Carbonatization along the veins of the retrogressed eclogite was probably coeval with formation of these symplectites. At places where carbonate is absent the rock was completely hydrated and retrogressed down to the greenschist facies with the development of actinolite. Similar eclogites together with abundant orthogneisses occur mainly in the eastern parts of the Tisza Megaunit, suggesting the existence of an ancient (possibly Variscan) subduction/accretionary complex.     

Fluid-controlled crustal metasomatism within a high-pressure subducted mélange (Mt. Hochwart, Eastern Italian Alps)

The Nonsberg–Ultental Region of northern Italy contains a Palaeozoic mélange that was partially subducted during the Variscan orogeny. This mélange is constituted mainly by metapelites characterized by shale-type REE-patterns, displaying partial melting which began under high-pressure conditions. The resulting migmatites enclose minor slivers of mantle-wedge peridotites that have been incorporated into the mélange during subduction. Peridotites display important large ion lithophile elements (LILE) enrichment consequent to amphibole recrystallization contemporaneously with metapelite migmatization at P ≈ 2.7 GPa and T ≈ 850 °C in the garnet–peridotite field. Crustal and mantle (ultramafic) rocks of the mélange display the same Sm–Nd ages of about 330 ± 6 Ma, which dates both the metamorphic peak and the migmatization event. The zircon U–Pb age of the metasomatic amphibolitic contact between garnet peridotite and migmatite is identical (333.3 ± 2.4 Ma) within analytical errors. Therefore, metasomatism, migmatization and peak metamorphism are constrained to the same event. The presence of Cl-rich apatite and ferrokinoshitalite in the contact amphibolite, together with the trace-element patterns of peridotites, suggest that metasomatism was driven by Cl- and LILE-rich fluids derived from ocean water transported into the subduction zone by sediments and crustal rocks. These fluids interacted with the crust, prompting partial melting under water oversaturated conditions and partitioning LILE from the crust itself. Peridotites, which were well below their wet solidus temperature, could not melt but they recrystallized in the crustal mélange under garnet-facies conditions. Crustal fluids caused extensive hydration and LILE-enrichment in peridotites and severe Sm–Nd isotope disequilibrium between minerals, especially in the recrystallized peridotites. The proposed scenario suggests massive entrapment of crustal aqueous fluids at high-pressure conditions within subduction zones.     

Geochemical and Sr–Nd–Pb isotopic compositions of the Eocene Dölek and Sariçiçek Plutons, Eastern Turkey: Implications for magma interaction in the genesis of high-K calc-alkaline granitoids in a post-collision extensional setting

The major and trace elements and Sr–Nd–Pb isotopes of the host rocks and the mafic microgranular enclaves (MME) gathered from the Dölek and Sariçiçek plutons, Eastern Turkey, were studied to understand the underlying petrogenesis and geodynamic setting. The plutons were emplaced at  43 Ma at shallow depths ( 5 to 9 km) as estimated from Al-in hornblende geobarometry. The host rocks consist of a variety of rock types ranging from diorite to granite (SiO₂ = 56.98–72.67 wt.%; Mg# = 36.8–50.0) populated by MMEs of gabbroic diorite to monzodiorite in composition (SiO₂ = 53.21–60.94 wt.%; Mg# = 44.4–53.5). All the rocks show a high-K calc-alkaline differentiation trend. Chondrite-normalized REE patterns are moderately fractionated and relatively flat [(La/Yb)_N = 5.11 to 8.51]. They display small negative Eu anomalies (Eu/Eu = 0.62 to 0.88), with enrichment of LILE and depletion of HFSE. Initial Nd–Sr isotopic compositions for the host rocks are ε_Nd(43 Ma) = − 0.6 to 0.8 and mostly I_Sr = 0.70482–0.70548. The Nd model ages (T_DM) vary from 0.84 to 0.99 Ga. The Pb isotopic ratios are (²⁰⁶Pb/²⁰⁴Pb) = 18.60–18.65, (²⁰⁷Pb/²⁰⁴Pb) = 15.61–15.66 and (²⁰⁸Pb/²⁰⁴Pb) = 38.69–38.85. Compared with the host rocks, the MMEs are relatively homogeneous in isotopic composition, with I_Sr ranging from 0.70485 to 0.70517, ε_Nd(43 Ma) − 0.1 to 0.8 and with Pb isotopic ratios of (²⁰⁶Pb/²⁰⁴Pb) = 18.58–18.64, (²⁰⁷Pb/²⁰⁴Pb) = 15.60–15.66 and (²⁰⁸Pb/²⁰⁴Pb) = 38.64–38.77. The MMEs have T_DM ranging from 0.86 to 1.36 Ga. The geochemical and isotopic similarities between the MMEs and their host rocks indicate that the enclaves are of mixed origin and are most probably formed by the interaction between the lower crust- and mantle-derived magmas. All the geochemical data, in conjunction with the geodynamic evidence, suggest that a basic magma derived from an enriched subcontinental lithospheric mantle, probably triggered by the upwelling of the asthenophere, and interacted with a crustal melt that originated from the dehydration melting of the mafic lower crust at deep crustal levels. Modeling based on the Sr–Nd isotope data indicates that  77–83% of the subcontinental lithospheric mantle involved in the genesis. Consequently, the interaction process played an important role in the genesis of the hybrid granitoid bodies, which subsequently underwent a fractional crystallization process along with minor amounts of crustal assimilation, en route to the upper crustal levels generating a wide variety of rock types ranging from diorite to granite in an extensional regime.     

Petrology and mineralogy of granulite-facies mafic xenoliths (Sardinia, Italy): Evidence for KCl metasomatism in the lower crust

Here new mineralogical data is presented on the occurrence of K-feldspar in granulite-facies metagabbronorite xenoliths found in recent alkaline lavas from Western Sardinia, Italy. The xenoliths originated from the underplating of variably evolved subduction-related basaltic liquids, which underwent cooling and recrystallisation in the deep crust (T = 850–900 °C, P = 0.8–1.0 GPa). They consist of orthopyroxene + clinopyroxene + plagioclase porphyroclasts (An = 50–66 mol%) in a granoblastic, recrystallised, quartz-free matrix composed of pyroxene + plagioclase (An = 56–72 mol%) + Fe–Ti oxides ± K-feldspar ± biotite ± fluorapatite ± Ti-biotite. Texturally, the K-feldspar occurs in a variety of different modes. These include: (1) rods, blebs, and irregular patches in a random scattering of plagioclase grains in the form of antiperthite; (2) micro-veins along plagioclase–plagioclase and plagioclase–pyroxene grain rims; (3) myrmekite-like intergrowths with Ca-rich plagioclase along plagioclase–plagioclase grain boundaries; and (4) discrete anhedral grains (sometimes microperthitic). The composition of each type of K-feldspar is characterized by relatively high albite contents (16–33 mol%). An increasing anorthite content in the plagioclase towards the contact with the K-feldspar micro-vein and myrmekite-like intergrowths into the K-feldspar along the plagioclase–K-feldspar grain boundary are also observed. Small amounts of biotite (TiO₂ = 4.7–6.5 wt.%; F = 0.24–1.19 wt.%; Cl = 0.04–0.20 wt.%) in textural equilibrium with the granulite-facies assemblage is present in both K-feldspar-bearing and K-feldspar-free xenoliths. These K-feldspar textures suggest a likely metasomatic origin due to solid-state infiltration of KCl-rich fluids/melts. The presence of such fluids is supported by the fluorapatite in these xenoliths, which is enriched in Cl (Cl = 6–50% of the total F + Cl + OH). These lines of evidence suggest that formation of K-feldspar in the mafic xenoliths reflects metasomatic processes, requiring an external K-rich fluid source, which operated in the lower crust during and after in-situ high-T recrystallisation of relatively dry rocks.     

Magma–carbonate interaction: An experimental study on ultrapotassic rocks from Alban Hills (Central Italy)

The Alban Hills ultrapotassic volcanic district is one of the main districts emplaced during Quaternary time along the Tyrrhenian margin of Italy. Alban Hills lava flows and scoria clasts are made up essentially of clinopyroxenes and leucites and their chemical composition is mostly K-foiditic. Differentiated products (MgO < 3 wt.%) are characterised by low SiO₂ concentration (< 50 wt.%) and geochemical features indicate that this unique differentiation trend is driven by crystal fractionation plus carbonate crust interaction. Notably, the Alban Hills Volcanic District was emplaced into thick limestone units. With the aim of constraining the magmatic differentiation, we performed experiments on the Alban Hills parental composition (plagioclase-free phono-tephrite) under anhydrous, hydrous, and hydrous-carbonated conditions. Experiments were carried out at 1 atm, 0.5 GPa and 1 GPa, temperatures ranging from 1050 to 1300 °C, and H₂O and CaCO₃ in the starting material up to 2 and 7 wt.%, respectively. The experiments performed at 0.5 GPa are the most representative of the Alban Hills plumbing system. Clinopyroxene and leucite are the main phases occurring under all the investigated conditions and the liquidus phases. Nevertheless, our experimental results demonstrate that the occurrence of CaCO₃ in the starting material strongly affects phase relations. Experiments performed under hydrous conditions crystallize magnetite and phlogopite at relatively high temperature. This early crystallization drives the glass composition towards a silica enrichment, resulting in a differentiation trend moving from phono-tephritic (Alban Hills parental composition) to phonolitic compositions. This is in contrast with micro-textural evidence showing late crystallization of magnetite and phlogopite in the natural products and with the composition of the juvenile products. On the contrary, in the CaCO₃-bearing experiments (i.e., simulating magma–carbonate interaction) the magnetite and phlogopite stability fields are strongly reduced. As a consequence, the melt differentiation is mainly controlled by the cotectic crystallization of clinopyroxene and leucite, resulting in a differentiation trend moving towards K-foiditic compositions. These experimental results are in agreement with micro-textural features and chemical compositions of Alban Hills natural products and with the magmatic differentiation model inferred by geochemical data. Magma–carbonate interaction is not a rare process and its occurrence has been demonstrated for different plumbing systems. However, the uniqueness of the Alban Hills liquid line of descent suggests that the efficacy of the carbonate contamination process is controlled by different factors, the dynamics of the plumbing system being one of the most important.     

Effect of Fe on garnet–melt trace element partitioning: experiments in FCMAS and quantification of crystal-chemical controls in natural systems

Garnet–melt trace element partitioning experiments were performed in the system FeO–CaO–MgO–Al₂O₃–SiO₂ (FCMAS) at 3 GPa and 1540°C, aimed specifically at studying the effect of garnet Fe²⁺ content on partition coefficients (D^Grt/Melt). D^Grt/Melt, measured by SIMS, for trivalent elements entering the garnet X-site show a small but significant dependence on garnet almandine content. This dependence is rationalised using the lattice strain model of Blundy and Wood [Blundy, J.D., Wood, B.J., 1994. Prediction of crystal–melt partition coefficients from elastic moduli. Nature 372, 452–454], which describes partitioning of an element i with radius r_i and valency Z in terms of three parameters: the effective radius of the site r₀(Z), the strain-free partition coefficient D₀(Z) for a cation with radius r₀(Z), and the apparent compressibility of the garnet X-site given by its Young's modulus E_X(Z). Combination of these results with data in Fe-free systems [Van Westrenen, W., Blundy, J.D., Wood, B.J., 1999. Crystal-chemical controls on trace element partitioning between garnet and anhydrous silicate melt. Am. Mineral. 84, 838–847] and crystal structure data for spessartine, andradite, and uvarovite, leads to the following equations for r₀(3+) and E_X(3+) as a function of garnet composition (X) and pressure (P):

r₀(3+) [Å]=0.930X_Py+0.993X_Gr+0.916X_Alm+0.946X_Spes+1.05(X_And+X_Uv)−0.005(P [GPa]−3.0)(±0.005 Å)

E_X(3+) [GPa]=3.5×10¹²(1.38+r₀(3+) [Å])^−26.7(±30 GPa)

Accuracy of these equations is shown by application to the existing garnet–melt partitioning database, covering a wide range of P and T conditions (1.8 GPa<P<5.0 GPa; 975°C<T<1640°C). D^Grt/Melt for all 3+ elements entering the X-site (REE, Sc and Y) are predicted to within 10–40% at given P, T, and X, when D^Grt/Melt for just one of these elements is known. In the absence of such knowledge, relative element fractionation (e.g. D_Sm^Grt/Melt/D_Nd^Grt/Melt) can be predicted. As an example, we predict that during partial melting of garnet peridotite, group A eclogite, and garnet pyroxenite, r₀(3+) for garnets ranges from 0.939±0.005 to 0.953±0.009 Å. These values are consistently smaller than the ionic radius of the heaviest REE, Lu. The above equations quantify the crystal-chemical controls on garnet–melt partitioning for the REE, Y and Sc. As such, they represent a major advance en route to predicting D^Grt/Melt for these elements as a function of P, T and X.     

P–T paths reconstruction of a collisional event: The example of the Thiviers-Payzac Unit in the Variscan French Massif Central

Because of late metamorphic and tectonic overprints, the reconstruction of prograde parts of P–T paths is often difficult. In the SW Variscan French Massif Central, the Thiviers-Payzac Unit (TPU) is the uppermost allochthon emplaced above underlying units. The TPU experienced a Barrovian metamorphism coeval with a top-to-the-NW ductile shearing (D2 event) in Early Carboniferous times (ca. 360–350 Ma). The tectonic setting of the D2 event, compression or synconvergence extension, remains unclear. Using the THERMOCALC software and the model system MnNCKFMASH, the peak P–T conditions are estimated from garnet rims and matrix minerals and the prograde evolution is deduced from garnet core compositions. The combination of these two approaches demonstrates that the TPU experienced pressure and temperature increases before reaching peak conditions at 6.6–9.0 +/− 1.2 kbar and 615–655 +/− 35 °C. This kind of P–T path shows that the regional D2 event corresponds to crustal thickening.     

Biotite stability in peraluminous granitic melts: Compositional dependence and application to the generation of two-mica granites in the South Bohemian batholith (Bohemian Massif, Czech Republic)

Crystallization experiments have been conducted in the system Na₂O–K₂O–MgO–FeO–Al₂O₃–SiO₂–H₂O (with 4% normative corundum) in order to constrain the stability of biotite as a function of water activity and the Mg# of biotite [Mg/(Mg +Fe_total)] in equilibrium with peraluminous granitic melts. The temperature at which biotite breakdown starts is strongly dependent on the Mg# of biotite. At 500 MPa, the temperature of biotite breakdown to form orthopyroxene increases from 750 °C to 830 °C, as the Mg# of biotite increases from 0.4 to 0.5. Considering that the system investigated is relevant for Ca-poor peraluminous biotite-bearing rocks (metapelites), the biotite dehydration curves obtained are used to discuss the melting reactions and the temperatures that lead to the formation of two distinct types of two-mica granites found in the South Bohemian batholith (specifically the Eisgarn and Deštná granites). The phase relationships were determined experimentally for the composition of these two granites in order to constrain the composition of the biotite in equilibrium with the melt in the protoliths. We demonstrate that Eisgarn granitic melts may have been generated at temperatures in the range 830–850 °C from melting reactions involving biotite with a Mg# up to 0.5 as a reactant. In contrast, Deštná granitic melts cannot have been generated from dehydration melting reactions involving biotite.     

Enrichment of SiO2 in rhyolites by fractional crystallization: An experimental study of peraluminous granitic rocks from the St. Francois Mountains, Missouri, USA

Experiments were conducted to test the hypothesis that higher silica rhyolites of the St. Francois Mountains, Missouri, USA are products of fractional crystallization of lower silica granitic magmas. Experiments were carried out at pressures of 0.5 and 1.0 kb under water-saturated conditions, temperatures ranged from 800° to 925°C and the oxygen fugacity for all experiments were maintained at, or near, the nickel-nickel oxide (NNO) buffer level.

Results of experiments with Butler Hill granite indicate that fractionation of near liquidus silicate phases, orthopyroxene and plagioclase, causes an enrichment of SiO₂ in the residual melts. Mineralogical and chemical compositions of the experimental charges are similar to that of higher silica Grassy Mountain rhyolites of the St. Francois Mountains. Experiments also show that at pressures of 1.0 Kb or higher orthopyroxene reacts with the hydrous melt to produce biotite which is a common phase in the plutonic rocks of the St. Francois Mountains.