Impact lithologies and their emplacement in the Chicxulub impact crater: Initial results from the Chicxulub Scientific Drilling Project,Yaxcopoil, Mexico

Abstract— The Chicxulub Scientific Drilling Project (CSDP), Mexico, produced a continuous core of material from depths of 404 to 1511 m in the Yaxcopoil‐1 (Yax‐1) borehole, revealing (top to bottom) Tertiary marine sediments, polymict breccias, an impact melt unit, and one or more blocks of Cretaceous target sediments that are crosscut with impact‐generated dikes, in a region that lies between the peak ring and final crater rim. The impact melt and breccias in the Yax‐1 borehole are 100 m thick, which is approximately 1/5 the thickness of breccias and melts exposed in the Yucatán‐6 exploration hole, which is also thought to be located between the peak ring and final rim of the Chicxulub crater. The sequence and composition of impact melts and breccias are grossly similar to those in the Yucatán‐6 hole. Compared to breccias in other impact craters, the Chicxulub breccias are incredibly rich in silicate melt fragments (up to 84% versus 30 to 50%, for example, in the Ries). The melt in the Yax‐1 hole was produced largely from the silicate basement lithologies that lie beneath a 3 km‐ thick carbonate platform in the target area. Small amounts of immiscible molten carbonate were ejected with the silicate melt, and clastic carbonate often forms the matrix of the polymict breccias. The melt unit appears to have been deposited while molten but brecciated after solidification. The melt fragments in the polymict breccias appear to have solidified in flight, before deposition, and fractured during transport and deposition.     

Empirical and theoretical comparisons of the Chicxulub and Sudbury impact structures

Abstract— Chicxulub and Sudbury are 2 of the largest impact structures on Earth. Research at the buried but well‐preserved Chicxulub crater in Mexico has identified 6 concentric structural rings. In an analysis of the preserved structural elements in the eroded and tectonically deformed Sudbury structure in Canada, we identified ring‐like structures corresponding in both radius and nature to 5 out of the 6 rings at Chicxulub. At Sudbury, the inner topographic peak ring is missing, which if it existed, has been eroded. Reconstructions of the transient cavities for each crater produce the same range of possible diameters: 80–110 km. The close correspondence of structural elements between Chicxulub and Sudbury suggests that these 2 impact structures are approximately the same size, both having a main structural basin diameter of ?150 km and outer ring diameters of ?200 km and ?260 km. This similarity in size and structure allows us to combine information from the 2 structures to assess the production of shock melt (melt produced directly upon decompression from high pressure impact) and impact melt (shock melt and melt derived from the digestion of entrained clasts and erosion of the crater wall) in large impacts. Our empirical comparisons suggest that Sudbury has ?70% more impact melt than does Chicxulub (?31,000 versus ?18,000 km³) and 85% more shock melt (27,000 km³ versus 14,500 km³). To examine possible causes for this difference, we develop an empirical method for estimating the amount of shock melt at each crater and then model the formation of shock melt in both comet and asteroid impacts. We use an analytical model that gives energy scaling of shock melt production in close agreement with more computationally intense numerical models. The results demonstrate that the differences in melt volumes can be readily explained if Chicxulub was an asteroid impact and Sudbury was a comet impact. The estimated 70% difference in melt volumes can be explained by crater size differences only if the extremes in the possible range of melt volumes and crater sizes are invoked. Preheating of the target rocks at Sudbury by the Penokean Orogeny cannot explain the excess melt at Sudbury, the majority of which resides in the suevite. The greater amount of suevite at Sudbury compared to Chicxulub may be due to the dispersal of shock melt by cometary volatiles at Sudbury.     

Hydrothermal alteration in the core of the Yaxcopoil‐1 borehole,Chicxulub impact structure,Mexico

Abstract Petrographic, electron microprobe, and Raman spectrometric analyses of Yaxcopoil‐1 core samples from the Chicxulub crater indicate that the impact generated a hydrothermal system. Relative textural and vein crosscutting relations and systematic distribution of alteration products reveal a progression of the hydrothermal event in space and time and provide constraints on the nature of the fluids. The earliest calcite, halite, and gaylussite suggest that the impactite sequence was initially permeated by a low temperature saline brine. Subsequent development of a higher temperature hydrothermal regime is indicated by thermal metamorphic diopside‐hedenbergite (Aeg₃Fs_18‐33En_32‐11Wo_47‐53) after primary augite and widespread Na‐K for Ca metasomatic alkali exchange in plagioclase. Hydrothermal sphene, apatite, magnetite + (bornite), as well as early calcite (combined 3 to 8 vol%) were introduced with metasomatic feldspar. A lower temperature regime characterized by smectite after probable primary glass, secondary chlorite, and other pre‐existing mafic minerals, as well as very abundant calcite veins and open‐space fillings, extensively overprinted the early hydrothermal stage. The composition of early and late hydrothermal minerals show that the solution was chlorine‐rich (Cl/F >10) and that its Fe/Mg ratio and oxidation state increased substantially (4 to 5 logfO₂ units) as temperature decreased through time. The most altered zone in the impactite sequence occurs 30 m above the impact melt. The lack of mineralogical zoning about the impact melt and convective modeling constraints suggest that this unit was too thin at Yaxcopoil‐1 to provide the necessary heat to drive fluids and implies that the hydrothermal system resulted from the combined effects of a pre‐existing saline brine and heat that traveled to the Yaxcopoil‐1 site from adjacent areas where the melt sheet was thicker. Limonite after iron oxides is more common toward the top of the sequence and suggests that the impactite section was subjected to weathering before deposition of the Tertiary marine cover. In addition, scarce latest anatase stringers, chalcopyrite, and barite in vugs, francolite after apatite, and recrystallized halite are the likely products of limited post‐hydrothermal ambient‐temperature diagenesis, or ocean and/or meteoric water circulation.     

Hornblende alteration and fluid inclusions in Kärdla impact crater,Estonia: Evidence for impact‐induced hydrothermal activity

Abstract— The well‐preserved Kärdla impact crater, on Hiiumaa Island, Estonia, is a 4 km diameter structure formed in a shallow Ordovician sea ?455 Ma ago into a target composed of thin (?150 m) unconsolidated sedimentary layer above a crystalline basement composed of migmatite granites, amphibolites and gneisses. The fractured and crushed amphibolites in the crater area are strongly altered and replaced with secondary chloritic minerals. The most intensive chloritization is found in permeable breccias and heavily shattered basement around and above the central uplift. Alteration is believed to have resulted from convective flow of hydrothermal fluids through the central areas of the crater. Chloritic mineral associations suggest formation temperatures of 100–300 °C, in agreement with the most frequent quartz fluid inclusion homogenization temperatures of 150–300 °C in allochthonous breccia. The rather low salinity of fluids in Kärdla crater (<13 wt% NaCl_eq) suggests that the hydrothermal system was recharged either by infiltration of meteoric waters from the crater rim walls raised above sea level after the impact, or by invasion of sea water through the disturbed sedimentary cover and fractured crystalline basement. The well‐developed hydrothermal system in Kärdla crater shows that the thermal history of the shock‐heated and uplifted rocks in the central crater area, rather than cooling of impact melt or suevite sheets, controlled the distribution and intensity of the impact‐induced hydrothermal processes.     

Chicxulub central crater structure: Initial results from physical property measurements and combined velocity and gravity modeling

Abstract The Chicxulub crater in Mexico is a nearly pristine example of a large impact crater. Its slow burial has left the central impact basin intact, within which there is an apparently uneroded topographic peak ring. Its burial, however, means that we must rely on drill holes and geophysical data to interpret the crater form. Interpretations of crater structures using geophysical data are often guided by numerical modeling and observations at other large terrestrial craters. However, such endeavors are hindered by uncertainties in current numerical models and the lack of any obvious progressive change in structure with increasing crater size. For this reason, proposed structural models across Chicxulub remain divergent, particularly within the central crater region, where the deepest well is only ?1.6 km deep. The shape and precise location of the stratigraphic uplift are disputed. The spatial extent and distribution of the allogenic impact breccias and melt rocks remain unknown, as do the lithological nature of the peak ring and the mechanism for its formation. The objective of our research is to provide a well‐constrained 3D structural and lithological model across the central region of the Chicxulub crater that is consistent with combined geophysical data sets and drill core samples. With this in mind, we present initial physical property measurements made on 18 core samples from the Yaxcopoil‐1 (Yax‐1) drill hole between 400 and 1500 m deep and present a new density model that is in agreement with both the 3D velocity and gravity data. Future collation of petrophysical and geochemical data from Yax‐1 core, as well as further seismic surveys and drilling, will allow us to calibrate our geophysical models—assigning a suite of physical properties to each lithology. An accurate 3D model of Chicxulub is critical to our understanding of large craters and to the constraining of the environmental effects of this impact.     

Chicxulub: Testing for post‐impact hydrothermal input into the Tertiary ocean

Abstract Studies of large terrestrial impact craters indicate that post‐impact hydrothermal activity is a likely consequence of the crustal deformation and heating induced by such events. In the case of the Chicxulub basin, where marine conditions were re‐established soon after the impact, significant fluxing of seawater through the crust and hydrothermal venting into the water column might be anticipated. We have carried out geochemical analyses of Tertiary carbonate sediments within the Yaxcopoil‐1 (Yax‐1) drill hole to test for evidence of such post‐impact hydrothermal circulation. Hydrothermal activity is most likely to be found close to thick layers of melt rock inside the collapsed transient cavity, and it is estimated that Yax‐1 is located ?20 km outside this cavity. Consequently, the most likely signature of hydrothermal venting into the water column would be geochemical anomalies attributable to fallout of suspended particulate matter from a submarine hydrothermal plume. Samples of Tertiary biomicrites from depths of 794.01 to 777.02 m have high concentrations of manganese, iron, phosphorous, titanium, and aluminium and low iron/manganese ratios relative to samples from higher in the stratigraphic succession. This geochemical anomaly decreases fairly systematically between 793.13 m and 777.02 m, above which an abrupt change in geochemistry is observed. A mass balance calculation suggests that the anomaly is unlikely to be the result of a decreasing detrital input to the carbonate sediments and the nature of the element enrichments is consistent with expectations for fallout from a distal hydrothermal plume. We conclude that a post‐impact hydrothermal system did develop at Chicxulub, which led to the expulsion of hydrothermal fluids into the Tertiary water column. Preliminary biostratigraphic and magnetostratigraphic dating on Yax‐1 core suggest that this hydrothermal activity lasted for at least 300 ka.     

Composition of impact melt particles and the effects of post‐impact alteration in suevitic rocks at the Yaxcopoil‐1 drill core,Chicxulub crater,Mexico

Abstract Petrographical and chemical analysis of melt particles and alteration minerals of the about 100 m‐thick suevitic sequence at the Chicxulub Yax‐1 drill core was performed. The aim of this study is to determine the composition of the impact melt, the variation between different types of melt particles, and the effects of post‐impact hydrothermal alteration. We demonstrate that the compositional variation between melt particles of the suevitic rocks is the result of both incomplete homogenization of the target lithologies during impact and subsequent post‐impact hydrothermal alteration. Most melt particles are andesitic in composition. Clinopyroxene‐rich melt particles possess lower SiO₂ and higher CaO contents. These are interpreted by mixing of melts from the silicate basement with overlying carbonate rocks. Multi‐stage post‐impact hydrothermal alteration involved significant mass transfer of most major elements and caused further compositional heterogeneity between melt particles. Following backwash of seawater into the crater, palagonitization of glassy melt particles likely caused depletion of SiO₂, Al₂O₃, CaO, Na₂O, and enrichment of K₂O and FeO_tot during an early alteration stage. Since glass is very susceptible to fluid‐rock interaction, the state of primary crystallization of the melt particles had a significant influence on the intensity of the post‐impact hydrothermal mass transfer and was more pronounced in glassy melt particles than in well‐crystallized particles. In contrast to other occurrences of Chicxulub impactites, the Yax‐1 suevitic rocks show strong potassium metasomatism with hydrothermal K‐feldspar formation and whole rock K₂0 enrichment, especially in the lower unit of the suevitic sequence. A late stage of hydrothermal alteration is characterized by precipitation of silica, analcime, and Na‐bearing Mg‐rich smectite, among other minerals. This indicates a general evolution from a silica‐undersaturated fluid at relatively high potassium activities at an early stage toward a silica‐oversaturated fluid at relatively high sodium activities at later stages in the course of fluid rock interaction.     

Evidence for ocean water invasion into the Chicxulub crater at the Cretaceous/Tertiary boundary

Abstract The possibility of ocean water invasion into the Chicxulub crater following the impact at the Cretaceous/Tertiary boundary was investigated based on examination of an impactite between approximately 794.63 and 894.94 m in the Yaxcopoil‐1 (Yax‐1) core. The presence of cross lamination in the uppermost part of the impactite suggests the influence of an ocean current at least during the sedimentation of this interval. Abundant occurrence of nannofossils of late Campanian to early Maastrichtian age in the matrices of samples from the upper part of the impactite suggests that the carbonate sediments deposited on the inner rim margin and outside the crater were eroded and transported into the crater most likely by ocean water that invaded the crater after its formation. The maximum grain size of limestone lithics and vesicular melt fragments, and grain and bulk chemical compositions show a cyclic variation in the upper part of the impactite. The upward fining grain size and the absence of erosional contact at the base of each cycle suggest that the sediments were derived from resuspension of units elsewhere in the crater, most likely by high energy currents association with ocean water invasion.     

Evidence for ocean water invasion into the Chicxulub crater at the Cretaceous/Tertiary boundary

Abstract— The possibility of ocean water invasion into the Chicxulub crater following the impact at the Cretaceous/Tertiary boundary was investigated based on examination of an impactite between approximately 794.63 and 894.94 m in the Yaxcopoil‐1 (Yax‐1) core. The presence of cross lamination in the uppermost part of the impactite suggests the influence of an ocean current at least during the sedimentation of this interval. Abundant occurrence of nannofossils of late Campanian to early Maastrichtian age in the matrices of samples from the upper part of the impactite suggests that the carbonate sediments deposited on the inner rim margin and outside the crater were eroded and transported into the crater most likely by ocean water that invaded the crater after its formation. The maximum grain size of limestone lithics and vesicular melt fragments, and grain and bulk chemical compositions show a cyclic variation in the upper part of the impactite. The upward fining grain size and the absence of erosional contact at the base of each cycle suggest that the sediments were derived from resuspension of units elsewhere in the crater, most likely by high energy currents association with ocean water invasion.     

Differential melt scaling for oblique impacts on terrestrial planets

Analytical estimates of melt volumes produced by a given projectile and contained in a given impact crater are derived as a function of impact velocity, impact angle, planetary gravity, target and projectile densities, and specific internal energy of melting. Applications to impact events and impact craters on the Earth, Moon, and Mars are demonstrated and discussed. The most probable oblique impact (45°) produces ～1.6 times less melt volume than a vertical impact, and ～1.6 and 3.7 times more melt volume than impacts with 30° and 15° trajectories, respectively. The melt volume for a particular crater diameter increases with planetary gravity, so a crater on Earth should have more melt than similar-size craters on Mars and the Moon. The melt volume for a particular projectile diameter does not depend on gravity, but has a strong dependence on impact velocity, so the melt generated by a given projectile on the Moon is significantly larger than on Mars. Higher surface temperatures and geothermal gradients increase melt production, as do lower energies of melting. Collectively, the results imply thinner central melt sheets and a smaller proportion of melt particles in impact breccias on the Moon and Mars than on Earth. These effects are illustrated in a comparison of the Chicxulub crater on Earth, linked to the Cretaceous–Tertiary mass extinction, Gusev crater on Mars, where the Mars Exploration Rover Spirit landed, and Tsiolkovsky crater on the Moon. The results are comparable to those obtained from field and spacecraft observations, other analytical expressions, and hydrocode simulations.     

Evidence for shock‐induced anhydrite recrystallization and decomposition at the UNAM‐7 drill core from the Chicxulub impact structure

Drill core UNAM‐7, obtained 126 km from the center of the Chicxulub impact structure, outside the crater rim, contains a sequence of 126.2 m suevitic, silicate melt‐rich breccia on top of a silicate melt‐poor breccia with anhydrite megablocks. Total reflection X‐ray fluorescence analysis of altered silicate melt particles of the suevitic breccia shows high concentrations of Br, Sr, Cl, and Cu, which may indicate hydrothermal reaction with sea water. Scanning electron microscopy and energy‐dispersive spectrometry reveal recrystallization of silicate components during annealing by superheated impact melt. At anhydrite clasts, recrystallization is represented by a sequence of comparatively large columnar, euhedral to subhedral anhydrite grains and smaller, polygonal to interlobate grains that progressively annealed deformation features. The presence of voids in anhydrite grains indicates SO_x gas release during anhydrite decomposition. The silicate melt‐poor breccia contains carbonate and sulfate particles cemented in a microcrystalline matrix. The matrix is dominated by anhydrite, dolomite, and calcite, with minor celestine and feldspars. Calcite‐dominated inclusions in silicate melt with flow textures between recrystallized anhydrite and silicate melt suggest a former liquid state of these components. Vesicular and spherulitic calcite particles may indicate quenching of carbonate melts in the atmosphere at high cooling rates, and partial decomposition during decompression at postshock conditions. Dolomite particles with a recrystallization sequence of interlobate, polygonal, subhedral to euhedral microstructures may have been formed at a low cooling rate. We conclude that UNAM‐7 provides evidence for solid‐state recrystallization or melting and dissociation of sulfates during the Chicxulub impact event. The lack of anhydrite in the K‐Pg ejecta deposits and rare presence of anhydrite in crater suevites may indicate that sulfates were completely dissociated at high temperature (T > 1465 °C)—whereas ejecta deposited near the outer crater rim experienced postshock conditions that were less effective at dissociation.     

Comparison of petrophysical properties of impactites for four meteoritic impact structures

We reanalyzed and compared unique data sets, which we obtained in the frame of combined petrophysical and geothermal investigations within scientific drilling projects on four impact structures: the Puchezh–Katunki impact structure (Vorotilovo borehole, Russia), the Ries impact structure (Noerdlingen‐73 borehole, Germany), the Chicxulub impact structure (ICDP Yaxcopoil‐1 borehole, Mexico), and the Chesapeake impact structure (ICDP‐USGS‐Eyreville borehole, USA). For a joined interpretation, we used the following previously published data: thermal properties, using the optical scanning technique, and porosities, both measured on densely sampled halfcores of the boreholes. For the two ICDP boreholes, we also used our previously published P‐wave velocities measured on a subset of cores. We show that thermal conductivity, thermal anisotropy, porosity, and velocity can be correlated with shock metamorphism (target rocks of the Puchezh–Katunki and Ries impact structures), and confirm the absence of shock metamorphism in the samples taken from megablocks (Chicxulub and Chesapeake impact structure). The physical properties of the lithic impact breccias and suevites are influenced mainly by their impact‐related porosity. Physical properties of lower porosity lithic impact breccias and suevites are also influenced by their chemical composition. These data allow for a distinction between different types of breccias due to differences concerning the texture and chemistry and the different amounts of melt and rock clasts.     

Fluid inclusion evidence for impact‐related hydrothermal fluid and hydrocarbon migration in Creataceous sediments of the ICDP‐Chicxulub drill core Yax‐1

Fluid inclusions studies in quartz and calcite in samples from the ICDP‐Chicxulub drill core Yaxcopoil‐1 (Yax‐1) have revealed compelling evidence for impact‐induced hydrothermal alteration. Fluid circulation through the melt breccia and the underlying sedimentary rocks was not homogeneous in time and space. The formation of euhedral quartz crystals in vugs hosted by Cretaceous limestones is related to the migration of hot (>200 °C), highly saline, metal‐rich, hydrocarbon‐bearing brines. Hydrocarbons present in some inclusions in quartz are assumed to derive from cracking of pre‐impact organic matter. The center of the crater is assumed to be the source of the hot quartz‐forming brines. Fluid inclusions in abundant newly‐formed calcite indicate lower cyrstallization temperatures (75–100 °C). Calcite crystallization is likely related to a later stage of hydrothermal alteration. Calcite precipitated from saline fluids, most probably from formation water. Carbon and oxygen isotope compositions and REE distributions in calcites and carbonate host rocks suggest that the calcite‐forming fluids have achieved close equilibrium conditions with the Cretaceous limestones. The precipitation of calcite may be related to the convection of local pore fluids, possibly triggered by impact‐induced conductive heating of the sediments.     

Secondary alteration of the impactite and mineralization in the basal Tertiary sequence,Yaxcopoil‐1, Chicxulub impact crater,Mexico

Abstract The 65 Ma Chicxulub impact crater formed in the shallow coastal marine shelf of the Yucatán Platform in Mexico. Impacts into water‐rich environments provide heat and geological structures that generate and focus sub‐seafloor convective hydrothermal systems. Core from the Yaxcopoil‐1 (Yax‐1) hole, drilled by the Chicxulub Scientific Drilling Project (CSDP), allowed testing for the presence of an impact‐induced hydrothermal system by: a) characterizing the secondary alteration of the 100 m‐thick impactite sequence; and b) testing for a chemical input into the lower Tertiary sediments that would reflect aquagene hydrothermal plume deposition. Interaction of the Yax‐1 impactites with seawater is evident through redeposition of the suevites (unit 1), secondary alteration mineral assemblages, and the subaqueous depositional environment for the lower Tertiary carbonates immediately overlying the impactites. The least‐altered silicate melt composition intersected in Yax‐1 is that of a calc‐alkaline basaltic andesite with 53.4–56 wt% SiO_{2(volatile‐free)}. The primary mineralogy consists of fine microlites of diopside, plagioclase (mainly Ab 47), ternary feldspar (Ab 37 to 77), and trace apatite, titanite, and zircon. The overprinting alteration mineral assemblage is characterized by Mg‐saponite, K‐montmorillonite, celadonite, K‐feldspar, albite, Fe‐oxides, and late Ca and Mg carbonates. Mg and K metasomatism resulted from seawater interaction with the suevitic rocks producing smectite‐K‐feldspar assemblages in the absence of any mixed layer clay minerals, illite, or chlorite. Rare pyrite, sphalerite, galena, and chalcopyrite occur near the base of the impactites. These secondary alteration minerals formed by low temperature (0–150°C) oxidation and fixation of alkalis due to the interaction of glass‐rich suevite with down‐welling seawater in the outer annular trough intersected at Yax‐1. The alteration represents a cold, Mg‐K‐rich seawater recharge zone, possibly recharging higher temperature hydrothermal activity proposed in the central impact basin. Hydrothermal metal input into the Tertiary ocean is shown by elevated Ni, Ag, Au, Bi, and Te concentrations in marcasite and Cd and Ga in sphalerite in the basal 25 m of the Tertiary carbonates in Yax‐1. The lower Tertiary trace element signature reflects hydrothermal metal remobilization from a mafic source rock and is indicative of hydrothermal venting of evolved seawater into the Tertiary ocean from an impact‐generated hydrothermal convective system.     

Shock‐metamorphosed zircon in terrestrial impact craters

Abstract— To ascertain the progressive stages of shock metamorphism of zircon, samples from three well‐studied impact craters were analyzed by optical microscopy, scanning electron microscopy (SEM), and Raman spectroscopy in thin section and grain separates. These samples are comprised of well‐preserved, rapidly quenched impactites from the Ries crater, Germany, strongly annealed impactites from the Popigai crater, Siberia, and altered, variably quenched impactites from the Chicxulub crater, Mexico. The natural samples were compared with samples of experimentally shock‐metamorphosed zircon. Below 20 GPa, zircon exhibits no distinct shock features. Above 20 GPa, optically resolvable planar microstructures occur together with the high‐pressure polymorph reidite, which was only retained in the Ries samples. Decomposition of zircon to ZrO₂ only occurs in shock stage IV melt fragments that were rapidly quenched. This is not only a result of post‐shock temperatures in excess of ?1700 °C but could also be shock pressure‐induced, which is indicated by possible relics of a high‐pressure polymorph of ZrO₂. However, ZrO₂ was found to revert to zircon with a granular texture during devitrification of impact melts. Other granular textures represent recrystallized amorphous ZrSiO₄ and reidite that reverted to zircon. This requires annealing temperatures >1100 °C. A systematic study of zircons from a continuous impactite sequence of the Chicxulub impact structure yields implications for the post‐shock temperature history of suevite‐like rocks until cooling below ?600 °C.     

Major and trace element characteristics of impactites from the Yaxcopoil‐1 borehole,Chicxulub structure,Mexico

Abstract— Approximately 100 m of impactites were retrieved from the ICDP borehole Yaxcopoil‐1 (Yax‐1), located ～60 km south‐southwest from the center of the Chicxulub impact crater on the Yucatán Peninsula of Mexico. Here, we characterize and discuss this impact breccia interval according to its geochemical characteristics. Chemical analysis of samples from all five recognized breccia units reveals that the impactites are of heterogeneous composition with regard to both major and trace elements at the single sample (8–16 cm³) scale. This is primarily due to a strong mixing relationship between carbonate and silicate fractions. However, averaged compositions for suevitic units 1 to 3 are similar, and the silicate fraction (after removal of the carbonate component) indicates thorough mixing and homogenization. Analysis of the green melt breccia horizon, unit 4, indicates that it contains a distinct mafic component. Large brown melt particles (in units 2, 3, and 4) represent a mixture of feldspathic and mafic components, with high CaO abundances. Unit 5 shows the greatest compositional diversity, with highly variable abundances of SiO₂, CaO, and MgO. Inter‐sample heterogeneity is the result of small sample size combined with inherent heterogeneous lithological compositions, highly variable particle size of melt and lithic components, and post‐depositional alteration. In contrast to samples from the Y6 borehole from closer to the center of the structure, Yax‐1 impactites have a strong carbonate component. Elevated loss on ignition, Rb, and Cs contents in the upper two impactite units indicate strong interaction with seawater. The contents of the siderophile elements, including Ni, Co, Ir, and Cr, do not indicate the presence of a significant extraterrestrial component in the Yax‐1 impactites.     

Origin and emplacement of the impact formations at Chicxulub,Mexico, as revealed by the ICDP deep drilling at Yaxcopoil‐1 and by numerical modeling

We present and interpret results of petrographic, mineralogical, and chemical analyses of the 1511 m deep ICDP Yaxcopoil‐1 (Yax‐1) drill core, with special emphasis on the impactite units. Using numerical model calculations of the formation, excavation, and dynamic modification of the Chicxulub crater, constrained by laboratory data, a model of the origin and emplacement of the impact formations of Yax‐1 and of the impact structure as a whole is derived. The lower part of Yax‐1 is formed by displaced Cretaceous target rocks (610 m thick), while the upper part comprises six suevite‐type allochthonous breccia units (100 m thick). From the texture and composition of these lithological units and from numerical model calculations, we were able to link the seven distinct impact‐induced units of Yax‐1 to the corresponding successive phases of the crater formation and modification, which are as follows: 1) transient cavity formation including displacement and deposition of Cretaceous “megablocks;” 2) ground surging and mixing of impact melt and lithic clasts at the base of the ejecta curtain and deposition of the lower suevite right after the formation of the transient cavity; 3) deposition of a thin veneer of melt on top of the lower suevite and lateral transport and brecciation of this melt toward the end of the collapse of the transient cavity (brecciated impact melt rock); 4) collapse of the ejecta plume and deposition of fall‐back material from the lower part of the ejecta plume to form the middle suevite near the end of the dynamic crater modification; 5) continued collapse of the ejecta plume and deposition of the upper suevite; 6) late phase of the collapse and deposition of the lower sorted suevite after interaction with the inward flowing atmosphere; 7) final phase of fall‐back from the highest part of the ejecta plume and settling of melt and solid particles through the reestablished atmosphere to form the upper sorted suevite; and 8) return of the ocean into the crater after some time and minor reworking of the uppermost suevite under aquatic conditions. Our results are compatible with: a) 180 km and 100 km for the diameters of the final crater and the transient cavity of Chicxulub, respectively, as previously proposed by several authors, and b) the interpretation of Chicxulub as a peak‐ring impact basin that is at the transition to a multi‐ring basin.     

Chicxulub impactites: Geochemical clues to the precursor rocks

Abstract— The 65 Ma Chicxulub impact structure, Mexico, with a diameter of ～180 km is the focus of geoscientific research because of its link to the mass extinction event at the Cretaceous‐Tertiary (K/T) boundary. Chicxulub, now buried beneath thick post‐impact sediments, is probably one of the best‐preserved terrestrial impact structures known. Because of its inaccessibility, only limited samples on the impact lithologies from a few drill cores are available. We report major element and Sr‐, Nd‐, O‐, and C‐isotopic data for Chicxulub impact‐melt lithologies and basement clasts in impact breccias of drill cores C‐1 and Y‐6, and for melt particles in the Chicxulub ejecta horizon at the K/T boundary in Beloc, Haiti. The melt lithologies with SiO₂ ranging from 58 to ～63 wt% show significant variations in the content of Al, Ca, and the alkalies. In the melt matrix samples, δ¹³C of the calcite is about ?3%o. The δ¹⁸O values for the siliceous melt matrices of Y‐6 samples range from 9.9 to 12.4%o. Melt lithologies and the black Haitian glass have rather uniform ⁸⁷Sr/⁸⁶Sr ratios (0.7079 to 0.7094); only one lithic fragment displays ⁸⁷Sr/⁸⁶Sr of 0.7141. The Sr model ages T^SrUR for most lithologies range from 830 to 1833 Ma; unrealistic negative model ages point to an open Rb‐Sr system with loss of Rb in a hydrothermal process. The ¹⁴³Nd/¹⁴⁴Nd ratios for all samples, except one basement clast with ¹⁴³Nd/¹⁴⁴Nd of 0.5121, cluster at 0.5123 to 0.5124. In an ?_Nd‐?_Sr diagram, impactites plot in a field delimited by ?_Nd of ?2 to ?6, and ?_Sr of 55 to 69. This field is not defined by the basement lithologies described to occur as lithic clasts in impact breccias and Cretaceous sediments. At least one additional intermediate to mafic precursor component is required to explain the data.     

Geochemical studies of the SUBO 18 (Enkingen) drill core and other impact breccias from the Ries crater,Germany

Suevite and melt breccia compositions in the boreholes Enkingen and Polsingen are compared with compositions of suevites from other Ries boreholes and surface locations and discussed in terms of implications for impact breccia genesis. No significant differences in average chemical compositions for the various drill cores or surface samples are noted. Compositions of suevite and melt breccia from southern and northeastern sectors of the Ries crater do not significantly differ. This is in stark contrast to the published variations between within‐crater and out‐of‐crater suevites from northern and southern sectors of the Bosumtwi impact structure, Ghana. Locally occurring alteration overprint on drill cores—especially strong on the carbonate‐impregnated suevite specimens of the Enkingen borehole—does affect the average compositions. Overall, the composition of the analyzed impact breccias from Ries are characterized by very little macroscopically or microscopically recognized sediment‐clast component; the clast populations of suevite and impact melt breccia are dominated consistently by granitic and intermediate granitoid components. The Polsingen breccia is significantly enriched in a dioritic clast component. Overall, chemical compositions are of intermediate composition as well, with dioritic‐granodioritic silica contents, and relatively small contributions from mafic target components. Selected suevite samples from the Enkingen core have elevated Ni, Co, Cr, and Ir contents compared with previously analyzed suevites from the Ries crater, which suggest a small meteoritic component. Platinum‐group element (PGE) concentrations for some of the enriched samples indicate somewhat elevated concentrations and near‐chondritic ratios of the most immobile PGE, consistent with an extraterrestrial contribution of 0.1–0.2% chondrite‐equivalent.     

Hydrothermal Systems Associated with Martian Impact Craters

With widespread evidence of both heat sources and water (either liquid or solid), hydrothermal systems are likely to have existed on Mars. We model hydrothermal systems in two sizes of fresh impact craters, one simple and one complex, and find that a hydrothermal system forms on the crater floor. In the larger complex craters with a substantial melt sheet, a lake can form, even under current martian atmospheric conditions. By comparing these hydrothermal systems to those that exist and have been studied extensively on the Earth, we make predictions as to the types of minerals that could be precipitated and the potential habitability of such systems by primitive organisms.