Arsenic and antimony contamination in the vicinity of Yata gold mine, Guizhou, China

The ores of the Yata gold mine in China are rich in arsenic and antimony, so the exploitation of this mine may also lead to the release of As and Sb to adjacent environments, such as stream water, stream sediment, soil, plants, and crops. To understand the environmental impact of mine tailings, samples of water, sediment, soil, plant and crop were collected and analyzed. In summer of 2005, the tailings dump was seriously flushed by a heavy flood, and the mine waste was transported far away. Samples were collected in December of 2004 and January of 2006, respectively, and the impact of the flood on the release of toxic elements was evaluated. The result shows that the Yata creek, which drains the mining area, was severely contaminated by As and Sb. The dissolved As and Sb in water are 86-1140 μg/L and 65-370 μg/L, the particulate As and Sb are 38-2100 μg/L and 25-420 μg/L, whereas As and Sb in the sediment are 190-760 μg/g and 69-210 μg/g, respectively. In water environment, As and Sb show a similar feature to SO4^2- since As and Sb exist dominantly as anions--H2AsO4^-, HAsO4^2- and SbO3^-. In contrast to Fe, Cu, Pb, Zn, which migrate mostly in particulate form, As and Sb tend to transport in dissolved form.     

Geochemistry,petrogenesis and tectonic setting of the peraluminous granites in the nacheng gold deposit,Yongning, Guangdong北大核心

The Nacheng granite locates in the Yong ning area, Guangdong Province. This paper studied petrographical and chronological characteristics of this granite as well as its petrogenesis and geological significance. The Nacheng granite mainly consists of quartz (40%-50%), orthoclase (25%-30%), palgioxlase (15%-20%) with minor accessory minerals of quartz apatite and magnetite. Geochemical analyses show that the manziying granite has high content of SiO2 (75. 56%) , K2O (4.72%), Al2O3 (13. 34%) and total alkali (Na2O+K2O=7. 49%), but relatively low MgO (0. 04%-1. 29%) and CaO (0. 39%-2. 21%). The ratios of K2O/Na 2O are generally higher than 1. The Rittmann indexes are between 1-2. 43, belonging to the high-K calc-alkaline series. The values of A/CNK vary from 1. 12 to 1. 32 with an average of 1. 10, showing the characteristics of peraluminous S type granites. Trace element analyses show that the Nacheng granite has relatively high REE content of 82. 6 × 10-6 225. 68 × 10-1, and displays right-inclined V-shape REE patterns with relatively high fractionations of LREE and HREE[(La/Yb)N = 1. 51-9. 66] and pronounced negative Eu anomalies (δEu = 0. 31-0. 74) in the chondrite-normalized REE diagrams, suggesting a typical crust-derived grandite. The magmas may be divided into two types: "low-temperature" type from mudstones and "high-temperature" type from sandstones. The Nacheng granites were formed from the post-orogenic tectonic setting.     

Hydrothermal alteration and associated mineralization in the Freda-Rebecca gold deposit – Bindura District, Zimbabwe

The Freda-Rebecca Mine is currently the largest gold producer in Zimbabwe. The ore deposit is hosted by two main shear systems crosscutting the Rebecca diorite and Bindura granodiorite (2.65 Ga) as well as Shamvaian metasediments, which are affected by contact metamorphism. Following the intrusion of the Bindura granodiorite, intensive hydrothermal alteration developed preferentially in the dioritic part of the igneous complex (Rebecca diorite). The hydrothermal alteration started with an extensive K-dominated hydrothermal metasomatism in the whole Rebecca diorite. It was followed by less penetrative hydrothermal alteration developed preferentially near shear zones and veinlets. Hydrothermal metasomatism caused microcline and biotite formation, prevailing in the Rebecca diorite. Two main stages of post-metasomatic hydrothermal alteration and mineralization were distinguished, based on spatial relationships between different minerals and some geochemical aspects. In the first stage, an actinolite-tourmaline-arsenopyrite mineralization formed, which is characterized by Ni-Co arsenopyrite associated with actinolite, tourmaline and quartz. The second, lower temperature stage gave a polyphase gold-rich mineralization that developed in four phases which are distinguished by different parageneses including: Phase 1. Actinolite, chlorite, clinozoisite/epidote, quartz, calcite, arsenopyrite, pyrite, pyrrhotite, chalcopyrite. Phase 2. Chlorite, epidote, calcite, gold, native Bi, Bi-Pb sulfides, galena, chalcopyrite, fahlore, pyrite, Fe-gersdorffite. Phase 3. Epidote, calcite, (Ni, Co, Fe) As S phases, Co-Fe-gersdorffite. Phase 4. Chlorite, calcite, quartz. The gold mineralization is exclusively associated with phase 2 and developed in three sulfide parageneses: – Gold + Bi-Pb sulfides + bismuth + chalcopyrite + galena, associated with chlorite (Au 1). – Gold + galena + pyrite, associated with calcite and chlorite (Au 2). – Gold + pyrite + Fe-gersdorffite, associated with epidote, chlorite and calcite (Au 3). The hydrothermal alteration and mineralization formed after the consolidation of the Rebecca diorite and Bindura granodiorite, most probably in the postmagmatic cooling stage. The mineralization was emplaced either synchronously or subsequently to the shear zones which crosscut the consolidated pluton. Not all shear zones are mineralized and different shear zones show different amounts of mineralization and hydrothermal alteration. Thus, it is suggested that during the cooling stage of the pluton and subsequent to the formation of the K-metasomatic zone (microcline + biotite), hydrothermal fluids preferentially followed just forming or pre-existing shear zones. It cannot be excluded that this process developed in a plutonic porphyry copper-like environment, in which the classically hydrothermal zonation did not form due to synchronous tectonic disturbance, which preferentially drives the hydrothermal flow along shear zones. Mineral parageneses and data from chlorite geothermometry indicate that the different stages and phases of hydrothermal alteration reflect cooling stages of the hydrothermal system, from >300 °C in the first stage to about 150 °C in the last phases. Received: 4 January 1999 / Accepted: 13 August 1999     

Transport of gold and silver in oxygen‐saturated fluids and the formation of high‐fineness gold in saprolitic supergene environments

This paper presents the results of thermodynamic calculations on the solubility of gold and silver in low‐temperature, moderately saline, oxygen‐saturated fluids. Based on the solubilities of gold and silver it is argued that the quantity of gold transported by the fluids depends on the concentration of silver in the primary ores. In ores where the silver/gold ratio is high (1 to > 10), the fluids become saturated in silver and can not dissolve geologically significant concentrations of gold. In ores where the silver/gold ratio is low (< 1), the fluids remain undersaturated with respect to silver and are able to dissolve geologically realistic concentrations of gold and silver. The oxidized fluids start depositing gold and silver as they move downwards and are reduced by the Fe⁺²‐bearing minerals of the primary ores. The occurrence of gold in lateritic profiles can be explained by a prolonged process of interaction between the fluid and primary ores, during which gold and silver precipitate and redissolve selectively at the gradually advancing oxidation‐reduction interface.     

Mercury in sediments from gold and copper exploitation areas in the Camaquã River Basin,Southern Brazil

Mercury concentrations were determined in stream sediments from the Camaquã River Basin, located in the shield region of the state of Rio Grande do Sul, southern Brazil. The resulting geochemical data show that overbank floodplain deposits exhibit higher concentrations than sediments collected from the active channel bed. In addition, higher Hg concentrations were measured in the fine(<63 μm) sediment fraction of the samples. Total Hg concentrations in the fine fraction of active stream sediments from Lavras do Sul County, which have been influenced by past gold mining activities, have decreased during the last five years to values ≤142 ng g⁻¹. However, in a settling pond containing abandoned mine wastes, the Hg concentration of a bulk sample remained exceptionally high (5220 ng g⁻¹). Preliminary speciation results show that Hg⁰ is the predominant species in most of the samples. This was the form of Hg released by the gold amalgamation activities in the area, and appears to be relatively stable under the existing E_h and pH conditions.     

Lode–gold mineralization in the Tanami region, northern Australia

The Tanami region of northern Australia has emerged over the last two decades as the largest gold-producing region in the Northern Territory. Gold is hosted by epigenetic quartz veins in sedimentary and mafic rocks, and by sulfide-rich replacement zones within iron formation. Although limited, geochronological data suggest that most mineralization occurred at about 1,805–1,790 Ma, during a period of extensive granite intrusion, although structural relationships suggest that some deposits predate this period. There are three main goldfields in the Tanami region: the Dead Bullock Soak goldfield, which hosts the world-class Callie deposit; The Granites goldfield; and the Tanami goldfield. In the Dead Bullock Soak goldfield, deposits are hosted by carbonaceous siltstone and iron formation where a late (D₅) structural corridor intersects an early F₁ anticlinorium. In The Granites goldfield, deposits are hosted by highly sheared iron formation and are interpreted to predate D₅. The Tanami goldfield consists of a large number of small, mostly basalt-hosted deposits that probably formed at a high structural level during D₅. The D₅ structures that host most deposits formed in a convergent structural regime with σ ₁ oriented between E–W and ENE–WSW. Structures active during D₅ include NE-trending oblique thrust (dextral) faults and ESE-trending (sinistral) faults that curve into N- to NNW-trending reverse faults localized in supracrustal belts between and around granite complexes. Granite intrusions also locally perturbed the stress field, possibly localizing structures and deposits. Forward modeling and preliminary interpretations of reflection seismic data indicate that all faults extend into the mid-crust. In areas characterized by the N- to NW-trending faults, orebodies also tend to be N- to NW-trending, localized in dilational jogs or in fractured, competent rock units. In areas characterized by ESE-trending faults, the orebodies and veins tend to strike broadly east at an angle consistent with tensional fractures opened during E–W- to ENE–WSW-directed transpression. Many of these deposits are hosted by reactive rock units such as carbonaceous siltstone and iron formation. Ore deposition occurred at depths ranging from 1.5 to 11 km from generally low to moderate salinity carbonic fluids with temperatures from 200 to 430°C, similar to lode–gold fluids elsewhere in the world. These fluids are interpreted as the product of metamorphic dewatering caused by enhanced heat flow, although it is also possible that the fluids were derived from coeval granites. Lead isotope data suggest that lead in the ore fluids had multiple sources. Hydrogen and oxygen isotope data are consistent with both metamorphic and magmatic origins for ore fluids. Gold deposition is interpreted to be caused by fluid unmixing and sulfidation of host rocks. Fluid unmixing is caused by three different processes: (1) CO₂ unmixing caused by interaction of ore fluids with carbonaceous siltstone; (2) depressurization caused by pressure cycling in shear zones; and (3) boiling as ore fluids move to shallow levels. Deposits in the Tanami region may illustrate the continuum model of lode–gold deposition suggested by Groves (Mineralium Deposita 28:366–374, 1993) for Archean districts.     

Structural controls on hydrothermal alteration and gold–antimony mineralisation in the Hillgrove area,NSW, Australia

The Hillgrove gold–antimony deposit is hosted in late Palaeozoic, biotite-grade metasedimentary rocks and Permo-Carboniferous granitoid intrusions of the New England Orogen. Mineralisation occurred at a range of structural levels during rapid uplift in the orogen at 255–245 Ma. Hydrothermal fluids were controlled by extensional faults in a regional-scale sinistral strike-slip fault system. Principal faults in this system were developed in, and possibly evolved from, mylonite zones which were active during Late Permian tectonics. Earliest mineralisation formed scheelite-bearing quartz veins, and these were followed by auriferous arsenopyrite–pyrite–quartz–carbonate veins with minor base metal sulphides. This latter type was accompanied by sericitisation and carbonation of the host rock, with addition of sulphur, arsenic and gold, in zones up to 20 m from veins. Quartz–stibnite veins with electrum, gold, aurostibite, and arsenopyrite form a prominent and economically important hydrothermal type, with little wall-rock alteration but extensive hydrothermal breccia formation and local open-space filling textures. Below a mining depth of 300–500 m, this type passes over a short distance downwards into stibnite-poor gold-bearing veins. Late-stage carbonate–stibnite veins with gold and silver sulphosalts cut all earlier veins, and have open-space filling textures. Aspects of the Hillgrove deposit have similarities to many other orogenic gold deposits in the SW Pacific which have been formed at different structural levels. Hillgrove is distinctive in having evidence for mineralisation at this wide range of structural levels in the one deposit, formed progressively during syn-orogenic uplift. Editorial handling: N. White     

Structural geochemistry of gold mineralization in the Linglong-Jiaojia district, Shandong Province, China

The Linglong-Jiaojia district is one of the most important regions containing gold deposits in China. These gold deposits can be divided into: a) the pyrite-gold-quartz vein type (Linglong type), which is controlled by brittle-ductile to ductile deformation structures, and b) the alteration-zone type (Jiaojia type), characterized by small veinlets, or the disseminated type recognized in brittle shear zones. Lode gold deposits in the Jiaojia area occur in NE brittle fracture zones, formed in a dominantly simple shear deformation regime, mainly in thrust attitude with a minor sinistral strike slip component. In the Linglong area, the lode gold deposits are located at the intersection of three types of structures: NNE and NE brittle-ductile fault zones and the ENE ductile reverse shear zone in the south of the area. The structural characteristics of these brittle shear zones are consistent with a tectonic NNW-SSE principal stress field orientation. Similar stresses explain the ENE Qixia fold axes, the Potouqing and several other ENE reverse ductile shear zones elsewhere in the region, the Tancheng-Lujiang fault zone and its subsidiaries in the vicinity of the Linglong-Jiaojia district, as well as the southern ENE suture zone north of Qingdao. Therefore these structural systems occurred as part of different major tectonic events under NNW-SSE compression principal stress fields in the area. Gold deposits are hosted in smaller-scale structures within the brittle fault zones and brittle-ductile shear zones. Although ore bodies and, on a smaller scale, quartz ore veins often seem to be randomly oriented, it is possible to explain their distribution and orientation in terms of the simple shear deformation process under which they were developed. The progressive simple shear failure is characterized by various fracture modes (tension and shear) that intervene in sequence. The tension and shear fractures are influenced by the stress level (depth of burial beneath the paleosurface) in their structural behavior, show variable dilatancy (void openings) and extend on all scales. By making use of these characteristics, a progressive failure analysis can be applied to predicting the shape and extent of ore bodies as well as the styles of mineralization at any given location.     

Petrogenetic character and provenance of metabasalts in the aspiring and Torlesse Terranes, South Island, New Zealand: Implications for the gold endowment of the Otago Schist?

We report quantitative X-ray diffraction, whole-rock geochemical and Sm–Nd isotope data for metabasalts from the Aspiring and Torlesse Terranes in the South Island of New Zealand. These rocks underlie the Mesozoic metasedimentary Otago Schist which is anomalously enriched in gold and host to at least one world-class orogenic gold deposit at Macraes (> 125 t Au). Geochemical and Nd isotopic similarities between the samples point to a common history of the two terranes rather than the amalgamation of one or two allochthonous plate fragments. Furthermore, geochemical and Nd data suggest the metabasalts within both terranes formed in an oceanic but essentially non-subduction-related setting. The origin of the Aspiring and Torlesse basalts can be linked to the formation of an oceanic plateau that had resulted from a (?Permian) mantle plume initiation event proximal to a mid-oceanic rise or triple junction. Given the intrinsically gold-enriched nature of certain oceanic-character mafic rocks, the anomalous gold endowment of the Otago Schist may have been enhanced via the accretion and subduction of a gold-enriched oceanic plateau fragment. The metabasalts are generally enriched in gold (up to 13 ppb) compared to their enclosing metasedimentary rocks (typically ca. 1 ppb), with sulphide-rich metabasaltic rocks having up to 550 ppb Au. However, the relatively small volume of metabasalts in the Otago Schist precludes these rocks as the principal source for Otago Schist orogenic gold, with a primarily metasedimentary source of the gold potentially having a limiting effect on the overall endowment of the Otago Schist. This approach, that employs petrogenetic fingerprinting of potentially fertile source rocks for the assessment of gold endowment, might prove useful in the conceptual exploration targeting of relatively immature and poorly exposed terrains.     

Helium and argon isotopic compositions of the Longquanzhan gold deposit in the Yishu fault zone and their geological implications

The Longquanzhan gold deposit hosted in granitic cataclasites with mylontization of the foot wall of the main Yishui-Tangtou fault. 3He/4He ratios in fluid inclusions range from 0. 14 to 0. 24 R/Ra,close to those of the crust-source helium. 40Ar/36Ar ratios were measured to be 289-1811, slightly higher than those of atmospheric argon. The results of analysis of helium and argon isotopes suggested that ore-forming fluids were derived chiefly from the crust. The δ18O values of fluid inclusions from vein quartz range from -1.78‰ to 4.07‰, and the δD values of the fluid inclusions vary between -74‰ and -77‰. The hydrogen and oxygen isotope data indicated that the ore-forming fluid for the Longquanzhan gold deposit had mixed with meteoric water in the process of mineralization. This is consistent with the conclusion from the helium and argon isotope data.     

Relationship of polycyclic aromatic sulfur compounds and gold enrichment in the Kupferschiefer from Poland and Germany

1INTRODUCTION ORGANICALLY BOUNDSULFURCOMPOUNDSWEREPREVI OUSLYDETECTEDINTHEKUPFERSCHIEFER(P櫣TTMANNAND GO EL,1990;ROSPONDEKETAL.,1994).P櫣TTMANN ANDGO EL(1990)INVESTIGATEDTHEEXTRACTABLEORGANIC MATTERINTHEKUPFERSCHIEFERFROMTHENORTH SUDETIC SYNCLINEANDPROPOS…     

Source and possible tectonic driver for Jurassic–Cretaceous gold deposits in the West Qinling Orogen,China

The West Qinling Orogen (WQO) in Central China Orogenic Belt contains numerous metasedimentary rock-hosted gold deposits (>2000 t Au), which mainly formed during two pulses: one previously recognized in the Late Triassic to Early Jurassic (T3–J1) and one only recently identified in the Late Jurassic to Early Cretaceous (J3–K1). Few studies have focused on the origin and geotectonic setting of the J3–K1 gold deposits.Textural relationships, LA-ICP-MS trace element and sulfur isotope compositions of pyrites in hydrothermally altered T3 dykes within the J3–K1 Daqiao deposit were used to constrain relative timing relationships between mineralization and pyrite growth in the dykes, and to characterize the source of ore fluid. These results are integrated with an overview of the regional geodynamic setting, to advance understanding of the tectonic driver for J3–K1 hydrothermal gold systems. Pyrite in breccia- and dyke-hosted gold ores at Daqiao have similar chemical and isotopic compositions and are considered to be representative of J3–K1 gold deposits in WQO. Co/Ni and sulfur isotope ratios suggest that ore fluids were derived from underlying Paleozoic Ni- and Se-rich carbonaceous sedimentary rocks. The geochemical data do not support the involvement of magmatic fluids. However, in the EQO (East Qinling Orogen), J3–K1 deposits are genetically related to magmatism. Gold mineralization in WQO is contemporaneous with magmatic deposits in the EQO and both are mainly controlled by NE- and EW-trending structures produced by changes in plate motion of the Paleo-Pacific plate as it was subducted beneath the Eurasian continent. We therefore infer that the J3–K1 structural regime facilitated the ascent of magma in the EQO and metamorphic fluids in the WQO with consequent differences in the character of contemporaneous ore deposits. If this is correct, then the far-field effects of subduction along the eastern margin of NE Asia extended 1000's of km into the continental interior.     

Environmental assessment of copper–gold–mercury mining in the Andacollo and Punitaqui districts,northern Chile

The Coquimbo region has been one of the richest producers of Cu, Au and Hg in Chile, and some of the deposits have been mined almost continuously since the 16th century. To assess the potential environmental contamination in this region, the authors measured the concentration of Cu, As, Cd, Zn and Hg in samples of stream and mine waters, stream sediments, soils, flotation tailings, and mine wastes in the Andacollo (Cu, Au, Hg) and Punitaqui (Cu–Au, Hg) districts. The concentration of Hg in the atmosphere in these districts were also measured. Although contamination is strongly controlled by the ore in each district, metal dispersion is modified by the degree of metallurgical processing efficiency as shown by the outdated Cu flotation system at Andacollo (stream sediments Cu 75–2200 μg/g). Conversely, more efficient procedures at Punitaqui resulted in less stream contamination, where stream sediments contained Cu ranging from 110–260 μg/g. However, efficient concentration by flotation of a given metal (e.g. Cu) may lead to the loss of another (e.g. Hg up to 190 μg/g in the tailings at Punitaqui), and therefore, to contamination via erosion of the tailings (downstream sediments Hg concentrations up to 5.3 μg/g). Continued use of Hg for Au amalgamation at Andacollo has led to significant contamination in stream sediments (0.2–3.8 μg/g Hg) and soils (2.4–47 μg/g Hg). Communities in this region are underdeveloped, and decades of inefficient treatment of flotation tailings and waste-rock stock piles has resulted in significant contamination of the surrounding landscape.     

Fluid immiscibility and gold deposition in the Birimian quartz veins of the Angovia deposit (Yaouré, Ivory Coast)

The Paleoproterozoic terranes (Birimian) of West Africa are well known to host numerous economic gold mineralizations. The Angovia gold mineralization is located in a brecciated and mylonitic zone within the Birimian greenstones. The sulfide–gold mineralization is mainly represented by gold associated with pyrite and chalcopyrite. A fluid inclusion study undertaken on mineralized quartz veins revealed the presence of aqueous-carbonic (CO₂–H₂O) fluids, the association of carbonic (CO₂) and early aqueous fluids, followed by later aqueous (H₂O-salt) and finally nitrogen-rich fluids. Entrapment of the initial homogeneous aqueous-carbonic fluids prior to fluid immiscibility depicts the evolution of the P–T conditions during the exhumation of the terranes after the peak of green-schist metamorphism. The CO₂ rich-fluid occurs especially in gold-bearing quartz, and are considered as the main evidence of the ore-forming process in the gold-bearing quartz veins. It is considered as a product of immiscibility of the CO₂–H₂O parent. The volatile fraction of carbonic and aqueous-carbonic fluid inclusions is dominated by CO₂, containing minor amounts of N₂, even smaller amounts of CH₄ and sporadically, H₂S. The aqueous-carbonic fluids have moderate salinity (3–10 wt.% eq. NaCl). Late aqueous and N₂ – (CH₄–CO₂) fluids are considered as later, unrelated to the main ore stage, and were trapped during the cooling of the hydrothermal system from 300 to 200 °C.The immiscibility has been favored by a strong pressure drop, the main trapping P–T conditions being 320–370 °C and 105–135 MPa. The mineralizing process is likely related to the immiscibility event, which was probably favored by the release of the fluid pressure after fracturing along the main shear zones. The ore process is likely to have occurred along the main shear zones or related secondary structures affected by cycling of the fluid pressure and quartz sealing–fracturing processes. The superimposed process can also explain the relative complexity of the quartz textures and fluid inclusion microfractures, and the rather wide range in the density of both parent fluid and CO₂-dominated fluid.     

Prospectivity for epithermal gold–silver deposits in the Deseado Massif,Argentina

Previous prospectivity modelling for epithermal Au–Ag deposits in the Deseado Massif, southern Argentina, provided regional-scale prospectivity maps that were of limited help in guiding exploration activities within districts or smaller areas, because of their low level of detail. Because several districts in the Deseado Massif still need to be explored, prospectivity maps produced with higher detail would be more helpful for exploration in this region.We mapped prospectivity for low- and intermediate-sulfidation epithermal deposits (LISEDs) in the Deseado Massif at both regional and district scales, producing two different prospectivity models, one at regional scale and the other at district-scale. The models were obtained from two datasets of geological evidence layers by the weights-of-evidence (WofE) method. We used more deposits than in previous studies, and we applied the leave-one-out cross validation (LOOCV) method, which allowed using all deposits for training and validating the models. To ensure statistical robustness, the regional and district-scale models were selected amongst six combinations of geological evidence layers based on results from conditional independence tests.The regional-scale model (1000 m spatial resolution), was generated with readily available data, including a lithological layer with limited detail and accuracy, a clay alteration layer derived from a Landsat 5/7 band ratio, and a map of proximity to regional-scale structures. The district-scale model (100 m spatial resolution) was generated from evidence layers that were more detailed, accurate and diverse than the regional-scale layers. They were also more cumbersome to process and combine to cover large areas. The evidence layers included clay alteration and silica abundance derived from ASTER data, and a map of lineament densities. The use of these evidence layers was restricted to areas of favourable lithologies, which were derived from a geological map of higher detail and accuracy than the one used for the regional-scale prospectivity mapping.The two prospectivity models were compared and their suitability for prediction of the prospectivity in the district-scale area was determined. During the modelling process, the spatial association of the different types of evidence and the mineral deposits were calculated. Based on these results the relative importance of the different evidence layers could be determined. It could be inferred which type of geological evidence could potentially improve the modelling results by additional investigation and better representation.We conclude that prospectivity mapping for LISEDs at regional and district-scales were successfully carried out by using WofE and LOOCV methods. Our regional-scale prospectivity model was better than previous prospectivity models of the Deseado Massif. Our district-scale prospectivity model showed to be more effective, reliable and useful than the regional-scale model for mapping at district level. This resulted from the use of higher resolution evidential layers, higher detail and accuracy of the geological maps, and the application of ASTER data instead of Landsat ETM + data. District-scale prospectivity mapping could be further improved by: a) a more accurate determination of the age of mineralization relative to that of lithological units in the districts; b) more accurate and detailed mapping of the favourable units than what is currently available; c) a better understanding of the relationships between LISEDs and the geological evidence used in this research, in particular the relationship with hydrothermal clay alteration, and the method of detection of the clay minerals; and d) inclusion of other data layers, such as geochemistry and geophysics, that have not been used in this study.     

Processes of high-T fluid–rock interaction during gold mineralization in carbonate-bearing metasediments: the Navachab gold deposit,Namibia

The Navachab gold deposit in the Damara belt of central Namibia is hosted by a near-vertical sequence of amphibolite facies shelf-type metasediments, including marble, calc-silicate rock, and biotite schist. Petrologic and geochemical data were collected in the ore, alteration halos, and the wall rock to evaluate transport of elements and interaction between the wall rock and the mineralizing fluid. The semi-massive sulfide lenses and quartz–sulfide veins are characterized by a complex polymetallic ore assemblage, comprising pyrrhotite, chalcopyrite, sphalerite, and arsenopyrite, native bismuth, gold, bismuthinite, and bismuth tellurides. Mass balance calculations indicate the addition of up to several orders of magnitude of Au, Bi, As, Ag, and Cu. The mineralized zones also record up to eightfold higher Mn and Fe concentrations. The semi-massive sulfide lenses are situated in the banded calc-silicate rock. Petrologic and textural data indicate that they represent hydraulic breccias that contain up to 50 vol.% ore minerals, and that are dominated by a high-temperature (T) alteration assemblage of garnet–clinopyroxene–K-feldspar–quartz. The quartz–sulfide veins crosscut all lithological units. Their thickness and mineralogy is strongly controlled by the composition and rheological behavior of the wall rocks. In the biotite schist and calc-silicate rock, they are up to several decimeters thick and quartz-rich, whereas in the marble, the same veins are only a few millimeters thick and dominated by sulfides. The associated alteration halos comprise (1) an actinolite–quartz alteration in the biotite schist, (2) a garnet–clinopyroxene–K-feldspar–quartz alteration in the marble and calc-silicate rock, and (3) a garnet–biotite alteration that is recorded in all rock types except the marble. The hydrothermal overprint was associated with large-scale carbonate dissolution and a dramatic increase in CO₂ in the ore fluid. Decarbonation of wall rocks, as well as a low REE content of the ore fluid resulted in the mobilization of the REE, and the decoupling of the LREE from the HREE. The alteration halos not only parallel the mineralized zones, but may also follow up single layers away from the mineralization. Alteration is far more pronounced facing upward, indicating that the rocks were steep when veining occurred. The petrologic and geochemical data indicate that the actinolite–quartz– and garnet–clinopyroxene–K-feldspar–quartz alterations formed in equilibrium with a fluid (super-) saturated in Si, and were mainly controlled by the composition of the wall rocks. In contrast, the garnet–biotite alteration formed by interaction with a fluid undersaturated in Si, and was mainly controlled by the fluid composition. This points to major differences in fluid–rock ratios and changes in fluid composition during alteration. The alteration systematics and geometry of the hydrothermal vein system are consistent with cyclic fluctuations in fluid pressure during fault valve action. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Alteration and mineral zonation at the Mt Lyell copper–gold deposit,Tasmania

The Mount Lyell copper deposits are located in the middle Cambrian Mount Read volcanic belt of western Tasmania and consist of more than 24 separate copper–gold–silver orebodies. The dominant copper mineralisation style is disseminated pyrite–chalcopyrite subvertical pipes with subordinate chalcopyrite–bornite ± other copper phases, massive pyrite and base metal sulfides. A zonation in mineralisation style within the pipes is defined from chalcopyrite–magnetite at depth to chalcopyrite–pyrite at intermediate levels, to chalcopyrite–bornite at the shallowest level. Alteration is developed broadly symmetrically around the ore zones and zoned from quartz–chlorite–phengite ± biotite at depth to quartz–muscovite at intermediate levels, and a quartz–muscovite–pyrophyllite–zunyite assemblage at the shallowest levels. This is interpreted to be a result of a fluid that evolved from hot, reduced and neutral conditions at depth to cool, oxidised and acidic conditions at the shallowest level. The chalcopyrite–bornite deposits occur at the top of the hydrothermal system and are associated with intensely silicified rock and muscovite/pyrophyllite alteration. The close relationship of these deposits with the top of the pipes suggests they are part of a single mineralising event. Where the chalcopyrite–bornite deposits are juxtaposed with the Owen Group, rather than a simple chalcopyrite–bornite mineralogy, there are numerous other copper phases, which represent higher oxidation states and collectively suggest variable and fluctuating fluid conditions during deposition. It is proposed that these deposits are formed by an interaction of the reduced hydrothermal fluid with an oxidised fluid generated at very shallow levels within and during deposition of the Owen Group. Mineralisation within the middle Owen Group sandstones and clasts of altered rock within the middle and upper Owen Group sediments marks the end of the hydrothermal system. Around the entire edge of the Mt Lyell field, there is a variation in the white mica composition from proximal muscovite to distal phengite that represents the neutralisation of the hydrothermal fluid by fluid–wall rock interaction.     

Oxidized and reduced mineral assemblages in greenstone belt rocks of the St. Ives gold camp, Western Australia: vectors to high-grade ore bodies in Archaean gold deposits?

Hydrothermal sulfide–oxide–gold mineral assemblages in gold deposits in the Archaean St. Ives gold camp in Western Australia indicate extremely variable redox conditions during hydrothermal alteration and gold mineralization in space and time. Reduced alteration assemblages (pyrrhotite–pyrite) occur in deposits in the southwest of the camp (e.g., Argo, Junction deposits) and moderately to strongly oxidized assemblages (magnetite–pyrite, hematite–pyrite) occur in deposits in the Central Corridor in the northeast (e.g., North Orchin, Revenge deposits). Reduced mineral assemblages flank the Central Corridor of oxidized deposits and, locally, cut across it along E–W trending faults. Oxidized mineral assemblages in the Central Corridor are focused on gravity lows which are interpreted to reflect abundant felsic porphyritic intrusions at about 1,000 m below present surface. Hydrothermal magnetite predates and is synchronous with early phases of gold-associated albite–carbonate–pyrite–biotite–chlorite hydrothermal alteration. Later-stage, gold-associated pyrite is in equilibrium with hematite. The spatial distribution and temporal sequence of iron sulfides and oxides with gold indicate the presence of at least two spatially restricted but broadly synchronous hydrothermal fluids with contrasting redox states. Sulfur isotope constraints support the argument that the different mineral assemblages reflect differences in redox conditions. The δ ³⁴S values for pyrite for the St. Ives gold camp range between −8.4‰ and +5.1‰ with the negative values occurring in oxidized magnetite-rich domains and slightly negative or positive values occurring in reduced, pyrrhotitic domains. Preliminary spatial and paragenetic analysis of the distribution of iron sulfides and oxides in the St. Ives camp suggests that gold grades are highest where the redox state of the hydrothermal alteration assemblages switches from relatively reduced pyrrhotite–pyrite to relatively oxidized magnetite–pyrite and hematite–pyrite both in space and time. Gold deposition is inferred to have occurred where fluids of contrasting redox state mixed.