Aeolian deposits on a Scottish mountain summit: characteristics,provenance, history and significance

The summit plateau of The Storr (719 m) in northern Skye is mantled by a sheet of aeolian sediment up to 2·9 m thick, covering an area of 33 000 m² with a volume of 41 000 m³. The deposits are of massive, poorly sorted sand with significant components of silt and fine gravel, and contain clasts up to 109 mm in length. The thickness and coarseness of the deposits decline westwards and northwards away from the highest cliffs, implying that the sediment comprises particles dislodged from rockwalls and blown upwards in an accelerating vertical or near-vertical airflow, settling through a lower-velocity flow onto the plateau surface where they are trapped by vegetation. Radiocarbon dating of soils buried under and within the deposits suggests that accumulation began after 7·2–6·9 calendar ka BP but before 5·6–5·3 calendar ka BP , and was probably initiated by exposure of the present rockwall by a massive landslide at c. 6·5 ± 0·5 calendar ka BP . Pollen analyses of buried organic horizons suggest that a vegetation mat dominated by grasses and sedges was present throughout the period of sediment deposition. Sediment accumulation over much of the plateau averaged 10–20 mm per century throughout the late Holocene, but reached c. 60 mm per century in the area of the thickest deposits. The volume of the deposits implies the removal of 420–480 mm of rock (averaged over the face) during the late Holocene, and suggests that small-scale granular disaggregation and release of small clasts constitute a major component of rockwall retreat under present conditions. The origin of the Storr deposits suggests that plateau-top aeolian sediments on other Scottish mountains accumulated in a similar way, but have been eroded and redeposited on lee slopes following breakage of vegetation cover. © 1998 John Wiley & Sons, Ltd.     

Hillslope–channel sediment transfer in a slope failure event: Wet Swine Gill,Lake District,northern England

This paper describes and analyses a hillslope–channel slope failure event that occurred at Wet Swine Gill, Lake District, northern England. This comprised a hillslope slide (180 m³, c. 203 ± 36 t), which coupled with the adjacent stream, resulting in a channelized debris flow and fluvial flood. The timing of the event is constrained between January and March 2002. The hillslope failure occurred in response to a rainfall/snowmelt trigger, on ground recently disturbed by a heather moorland fire and modified by artificial drainage. Slide and flow dynamics are estimated using reconstructed velocity and discharge values along the sediment transfer path. There is a rapid downstream reduction in both maximum velocity, from 9·8 to 1·3 m s^?1; and maximum discharge, ranging from 33·5 to 2·4 m³ s^?1. A volumetric sediment budget quantified a high degree of coupling between the hillslope and immediate channel (～92%: 167 m³), but virtually all of the sediment was retained in the first‐order tributary channel. Approximately 44% (81 m³) of the slide volume was retained in the run‐up deposit, and termination of the debris flow prior to the main river meant that the remainder did not discharge into the fluvial system downstream. These results suggest poor transmission of sediment to the main river at the time of the event, but importantly an increase in available material for post‐event sediment transfer processes within the small upland tributary. Copyright © 2007 John Wiley & Sons, Ltd.     

Debris flow during intense rainfall in Snowdonia,North Wales: A preliminary survey

Intense rainfall after the abnormally dry and warm summer of 1983 triggered debris flows in mountainous terrain in North Wales. This preliminary investigation concentrates on a flow which blocked the A5, requiring £56,000 of remedial work. An estimated 118·4 mm of rain fell over steep, rocky catchments in 5 hrs (peak intensity 39·9 mm hr^?1) and water emerging from a rock chute mobilized colluvium on lower slopes, in which pore water pressure was probably already rising fast and bulk properties and other geotechnical conditions, including low shearing resistance, were favourable. Debris flowed in a narrow concave track 585 m long, x slope 27·8°, descending 282 m. The scoured channel, levées and debris lobes typical of documented flows elsewhere suggest that flow was rapid, turbulent, and pulsing.     

Relating aerial erosion,soil erosion and sub‐soil erosion to the evolution of Lunan Stone Forest,China

Stone forest (‘Shilin’ in Chinese) is a unique karst landform with a complex evolution process. Based mainly on the characteristics and interrelationships of sub‐soil, soil and sub‐aerial erosion in Lunan karst area, the authors develop a triplex erosion model to describe the evolution of stone forest, and apply it to examine the current development stage and the prospect of the Lunan Stone Forest. The study shows that sub‐soil corrosion, a basic driving force for the vertical scope of a stone forest, usually occurs within 10 m below ground surface but is observed to be most active within the top 2 m, which constitutes the best development zone for stone forest. Under modern climatic conditions, the tip of the stone pillars in Lunan karst area is lowering at a rate of 10·4 mm ka^?1, whereas the base of the stone pillars is deepening at 26·17 mm ka^?1. Therefore, the height of stone pillars is increasing at a rate of 15·77 mm ka^?1. Considering that soil erosion in the study area is as high as 650 mm ka^?1, the visible height of the stone forest is actually increasing at a rate of 639·6 mm ka^?1. However, the best evolution time for Lunan Stone Forest has already passed despite the fact that it is still growing taller at the present time. This is because the soil layer, which plays an extremely significant role in the heightening of stone pillars, is rapidly thinning at a rate of 623·83 mm ka^?1. Copyright © 2006 John Wiley & Sons, Ltd.     

Erosion in northwest Tibet from in‐situ‐produced cosmogenic 10Be and 26Al in bedrock

Concentrations of in‐situ‐produced cosmogenic nuclides ¹⁰Be and ²⁶Al in quartz were measured by accelerator mass spectrometry for bedrock basalts and sandstones located in northwest Tibet. The effective exposure ages range between 23 and 134 ka (¹⁰Be) and erosion rates between 4·0 and 24 mm ka^?1. The erosion rates are significantly higher than those in similarly arid Antarctica and Australia, ranging between 0·1 and 1 mm ka^?1, suggesting that precipitation is not the major control of erosion of landforms. Comparison of erosion rates in arid regions with contrasting tectonic activities suggests that tectonic activity plays a more important role in controlling long‐term erosion rates. The obtained erosion rates are, however, significantly lower than the denudation rate of 3000–6000 mm ka^?1 beginning at c. 5‐3 Ma in the nearby Godwin Austen (K2) determined by apatite fission‐track thermochronology. It appears that the difference in erosion rates within different time intervals is indicative of increased tectonic activity at c. 5–3 Ma in northwest Tibet. We explain the low erosion rates determined in this study as reflecting reduced tectonic activity in the last million years. A model of localized thinning of the mantle beneath northwest Tibet may account for the sudden increased tectonic activity at c. 5–3 Ma and the later decrease. Copyright © 2006 John Wiley & Sons, Ltd.     

Dissolved organic carbon export from a cutover and restored peatland

High demand for horticultural peat has increased peatland drainage and peat extraction in Canada. The hydrology and carbon cycling of these cutover peatlands is greatly altered, necessitating active restoration efforts to permit the regeneration of Sphagnum mosses and the re‐establishment of natural peatland function. The effect of peatland extraction and restoration on the export of dissolved organic carbon (DOC) was examined for three successive seasons (May to October, 1999 to 2001) at two different sites (cutover and restored) in eastern Québec. A shift towards higher DOC concentrations was observed following peatland extraction (maximum: 182·6 mg L^?1) and concentrations remained high post‐restoration (maximum: 191·0 mg L^?1). The cutover site exported more DOC than the restored site in all three study seasons. The highest exports occurred during the wettest year (1999), with cutover and restored site export of 10·3 and 4·8 g m^?2, respectively. In 2000, 8·5 g C m^?2 was released from the cutover site, while the restored site released less than half that amount (3·4 g C m^?2). In 2001, the restored site released about the same amount of DOC as in the previous year (3·5 g C m^?2), while the cutover site load dropped to 6·2 g C m^?2. Both sites were net exporters of DOC in all years. Copyright © 2007 John Wiley & Sons, Ltd.     

Sidewall erosion: Insights from in situ-produced 10Be concentrations measured on supraglacial clasts (Mont Blanc massif,France)

Sidewall erosion because of rockfalls is one of the most efficient erosional processes in the highest parts of mountain ranges; it is therefore important to quantify sidewall erosion to understand the long-term evolution of mountainous topography. In this study, we analyse how the ¹⁰Be concentration of supraglacial debris can be used to quantify sidewall erosion in a glaciated catchment. We first analyse, in a glaciated catchment, the cascade of processes that move a rock from a rockwall to a supraglacial location and propose a quantitative estimate of the number of rockfalls statistically mixed in a supraglacial sand sample. This model incorporates the size of the rockwall, a power law distribution of the size of the rockfalls and the mean glacial transport velocity. In the case of the Bossons glacier catchment (Mont Blanc massif), the ¹⁰Be concentrations obtained for supraglacial samples vary from 1.97 ± 0.24 to 23.82 ± 1.68 × 10⁴ atoms g⁻¹. Our analysis suggests that part of the ¹⁰Be concentration dispersion is related to an insufficient number of amalgamated rockfalls that does not erase the stochastic nature of the sidewall erosion. In the latter case, the concentration of several collected samples is averaged to increase the number of statistically amalgamated rockfalls. Variable and robust ¹⁰Be-derived rockwall retreat rates are obtained for three distinct rockfall zones in the Bossons catchment and are 0.19 ± 0.08 mm year⁻¹, 0.54 ± 0.1 mm year⁻¹ and 1.08 ± 0.17 mm year⁻¹. The mean ¹⁰Be retreat rate for the whole catchment (ca. 0.65 mm year⁻¹) is close to the present-day erosion rate derived from other methods. © 2019 John Wiley & Sons, Ltd.     

Hydro‐climatic variability and trends in Washington State for the last 50 years

Historical records of monthly streamflow and precipitation coupled with mean, minimum, and maximum air temperatures for Washington State were used to study the variation and the trend characteristics that occurred over the last 50 years (1952–2002). Results indicate that the 1967 statewide water resource assessment needs to be updated because all of the stations used in that study exhibited a decreasing trend in annual streamflow ranging from ?0·9% to ?49·3%, with an arithmetic mean of ?11·7% and a median value of ?9·8%. Furthermore, a slightly decreasing trend in annual streamflow, although not statistically significant, was detected. The decreasing streamflow magnitude was about ?1·178 mm year^?2, or 4·88 m³ s^?1 year^?1, which caused a decrease in annual streamflow in the state of about 58·9 mm, or 244 m³ s^?1. This magnitude was about 9·6% of the average annual streamflow for the entire state from 1952 to 2002. Contrastingly, the overall annual precipitation in the entire state increased 1·375 mm year^?2. Overall the annual means of daily mean, maximum, and minimum temperature increased by 0·122, 0·048, and 0·185 °C/10 years, respectively, during the study period. Thus the corresponding annual means of daily mean, maximum, and minimum temperatures increased by 0·61, 0·24, and 0·93 °C, respectively. All of these trends and magnitudes were found to vary considerably from station to station and month to month. The possible reasons resulting in these detected trends include, but are not limited to, human activities, climate variability and changes, and land use and land cover changes. Copyright © 2009 John Wiley & Sons, Ltd.     

GIS‐assisted modelling for debris flow hazard assessment based on the events of May 1998 in the area of Sarno,Southern Italy: Part I. Maximum run‐out

Based on the debris flow events that occurred in May 1998 in the area of Sarno, Southern Italy, this paper presents an approach to simulate debris flow maximum run‐out. On the basis of the flow source areas and an average thickness of 1·2 m of the scarps, we estimated debris flow volumes of the order of 10⁴ and 10⁵ m³. Flow mobility ratios (ΔH/L) derived from the x, y, z coordinates of the lower‐most limit of the source areas (i.e. apex of the alluvial fan) and the distal limit of the flows ranged between 0·27 and 0·09. We performed regression analyses that showed a good correlation between the estimated flow volumes and mobility ratios. This paper presents a methodology for predicting maximum run‐out of future debris flow events, based on the developed empirical relationship. We implemented the equation that resulted from the calibration as a set of GIS macros written in Visual Basic for Applications (VBA) and running within ArcGIS. We carried out sensitivity analyses and observed that hazard mapping with this methodology should attempt to delineate hazard zones with a minimum horizontal resolution of 0·4 km. The developed procedure enables the rapid delineation of debris flow maximum extent within reasonable levels of uncertainty, it incorporates sensitivities and it facilitates hazard assessments via graphic user interfaces and with modest computing resources. Copyright © 2007 John Wiley & Sons, Ltd.     

Using sediment travel distance to estimate medium‐term erosion rates: a 16‐year record

Fine grained (80 µm) magnetite was introduced onto a semi‐arid grassland hillslope in 1992, as part of a set of rainfall‐simulation experiments. Using measurements of magnetic susceptibility, the median distance travelled by these magnetite grains during subsequent natural runoff events in the 16‐year period up to 2008 was estimated. Coupling this estimate to direct measurements of sediment flux obtained during the rainfall‐simulation experiments has enabled estimation of the erosion rate over this period. The estimated average erosion rate of between 2·61 × 10^?2 and 4·36 × 10^?2 kg m^?1 year^?1, is equivalent to a rate of ground lowering between 0·020 and 0·033 mm year^?1. This estimate is consistent with (in the sense of being less than) an estimate of total sediment detachment over the same period. The rate of erosion measured using this travel‐distance approach is an order of magnitude less that obtained from a study based on ¹³⁷Cs in a nearby catchment, and compatible with the longevity of continents. Copyright © 2010 John Wiley & Sons, Ltd.     

Physical modelling of fault scarp degradation under freeze–thaw cycles

Physical modelling has been developed in order to simulate the effects of periglacial erosion processes on the degradation of slopes and scarps. Data from 41 experimental freeze–thaw cycles are presented. They attest to the efficiency of periglacial processes that control both erosion and changes in scarp morphology: (i) cryoexpulsion leads to an increase of scarp surface roughness and modifies significantly the internal structure of the active layer; (ii) combined effects of frost creep and gelifluction lead to slow and gradual downslope displacements of the active layer (0·3 cm/cycle); (iii) debris flows are associated with the most significant changes in scarp morphology and are responsible for the highest rate of scarp erosion; (iv) quantification of the erosion rate gives values close to 1 cm³ cm^?2 for 41 freeze–thaw cycles. These experimental results are consistent with field data acquired along the La Hague fault scarp (Normandy, France) where an erosion rate of 4·6 ± 1 m³ m^?2 per glacial stage has been computed from the volume of natural slope deposits stored during the Weichselian glacial stage. These results show that moist periglacial erosion processes could lead to an underestimation of Plio‐Quaternary deformation in the mid‐latitudes. Copyright © 2006 John Wiley & Sons, Ltd.     

Investigations regarding Alpine talus slopes using ground‐penetrating radar (GPR) in the Bavarian Alps,Germany

The applicability of ground‐penetrating radar (GPR) for the investigation of loose debris was tested at two sites (Viererkar and Zugspitzplatt). A pulseEKKO 100 GPR system equipped with 25 MHz antennae was utilized. The aim of the investigation was to record the base of the debris layer, and thereby acquire an estimation of the backweathering rates of the adjacent rockwalls. The study areas are situated in the Northern Alps near the German–Austrian border. The sites are characterized by steep limestone rockwalls and extensive talus accumulations. A total of six profiles was surveyed. The method is suitable and effective for a quick survey in this dry, high‐ohmic substrate. The GPR system was able to deliver information about the subsurface stratigraphy to c. 70 m depth. The boundary line to the bedrock was discovered – depending upon the profile surveyed ?5 to 25 m below the surface. The base of the debris material sometimes shows no distinct reflection. Buried features (V‐shaped furrows, zones overdeepened by ice action, geological structures) could be detected. Arched structures well below the talus–bedrock interface can be interpreted as drainage systems in the karstic bedrock. A thick scree layer of Late Glacial age was separated from a thinner layer on the talus surface, which was related to the Holocene. The backweathering rates were fixed by a calculation of talus volume to c. 100 mm/10³ a during the Holocene (Viererkar) and 150–300 mm/10³ a (Zugspitzplatt). The detrital formation in north‐exposed sites is twice as intense as in south‐exposed sites. These results match the rates of recent rockfall in the same area of investigation. The calculated backweathering for the late glacial period is 150–730 mm/10³ a. The magnitude of the calculated rockwall retreat lies well within the range of previous measurements. The discrepancy between some weathering rates highlights the fact that recent and past relief formation must be differentiated. Otherwise recent removal rates may be overestimated. Copyright © 2001 John Wiley & Sons, Ltd.     

Rates of rockwall slope erosion in the upper Bhagirathi catchment,Garhwal Himalaya

Rockwall slope erosion is defined for the upper Bhagirathi catchment using cosmogenic Beryllium-10 (¹⁰Be) concentrations in sediment from medial moraines on Gangotri glacier. Beryllium-10 concentrations range from 1.1 ± 0.2 to 2.7 ± 0.3 × 10⁴ at/g SiO₂, yielding rockwall slope erosion rates from 2.4 ± 0.4 to 6.9 ± 1.9 mm/a. Slope erosion rates are likely to have varied over space and time and responded to shifts in climate, geomorphic and/or tectonic regime throughout the late Quaternary. Geomorphic and sedimentological analyses confirm that the moraines are predominately composed of rockfall and avalanche debris mobilized from steep relief rockwall slopes via periglacial weathering processes. The glacial rockwall slope erosion affects sediment flux and storage of snow and ice at the catchment head on diurnal to millennial timescales, and more broadly influences catchment configuration and relief, glacier dynamics and microclimates. The slope erosion rates exceed the averaged catchment-wide and exhumation rates of Bhagirathi and the Garhwal region on geomorphic timescales (10³−10⁵ years), supporting the view that erosion at the headwaters can outpace the wider catchment. The ¹⁰Be concentrations of medial moraine sediment for the upper Bhagirathi catchment and the catchments of Chhota Shigri in Lahul, northern India and Baltoro glacier in Central Karakoram, Pakistan show a tentative relationship between ¹⁰Be concentration and precipitation. As such there is more rapid glacial rockwall slope erosion in the monsoon-influenced Lesser and Greater Himalaya compared to the semi-arid interior of the orogen. Rockwall slope erosion in the three study areas, and more broadly across the northwest Himalaya is likely governed by individual catchment dynamics that vary across space and time. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons, Ltd.     

Soil partitioning and surface store controls on spring runoff from a boreal forest peatland basin in north‐central Manitoba,Canada

The mid‐ to high‐boreal forest in Canada occupies the discontinuous permafrost zone, and is often underlain by glaciolacustrine sediments mantled by a highly porous organic mat. The result is a poorly drained landscape dominated by wetlands. Frost‐table dynamics and surface storage conditions help to control runoff contributions from various landscape elements, hydrological linkages between these elements, and basin streamflow during spring snowmelt. Runoff components and pathways in a forested peatland basin were assessed during two spring snowmelts with contrasting input and basin conditions. Runoff from relatively intense melt (up to 16 mm day^?1) on slopes with limited soil thawing combined with large pre‐melt storage in surface depressions to produce high flows composed primarily of meltwater (78% of the 0·29 m³ s^?1 peak discharge) routed over wetland surfaces and through permeable upper peat layers. Melt intensity was less in the subsequent year (maximum of 10 mm day^?1) and active layer development was relatively greater (0·2 m deeper at the end of spring melt), resulting in less slope runoff. Coupling of reduced slope contributions with lower storage levels in basin wetlands led to relatively subdued streamflows dominated by older water (73% of the 0·09 m³ s^?1 peak discharge) routed through less‐permeable deeper peat layers and mineral soil. Interannual differences in runoff conditions provide important insight for the development of distributed hydrological models for boreal forest basins and into potential influences on biogeochemical cycling in this landscape under a warming climate. Copyright © 2001 John Wiley & Sons, Ltd.     

Holocene Rockwall Retreat in Svalbard: A Triple-Rate Evolution

Volumetric calculations of slope deposits, direct measurements of rockwall retreat and chronological control based on lichenometry provide a wide range of rockwall retreat rates in Svalbard (0–1580 mm ka⁻¹) that appears consistent with previous evaluations from other Arctic areas. In northwest and central Spitsbergen (79°N), a triple-rate rockwall retreat is suggested for the last two millennia: very slow biogenic flaking (2 mm ka⁻¹), moderate retreat due to frost shattering (100 ka⁻¹) and rapid retreat associated with post-glacial stress relaxation (c. 1000 mm ka⁻¹). Examination of the distribution of various processes indicates that the Holocene retreat of most rockwalls has not exceeded one or two metres. Bedrock conditions appear to be the main control on retreat rates. The massiveness of igneous and metamorphic outcrops, widespread in Arctic shield areas, largely accounts for the slowness of rockwall retreat, which on these lithologies is primarily due to chemical and biological processes. More rapid rates are usually associated with stress relaxation following glacial surges or with local frost susceptibility of bedrock, often where faulting has induced high joint density. At such sites, rockwall retreat rates are of the same order of magnitude as those reported from Alpine areas (1000–3000 mm ka⁻¹) where both bedrock weakening due to tectonic stresses and the greater height of steep rockwalls account for the more rapid rockwall retreat rate. © 1997 by John Wiley & Sons, Ltd.     

Energy balance and evaporation loss of an agricultural reservoir in a semi‐arid climate (south‐eastern Spain)

A typical agricultural water reservoir (AWR) of 2400 m² area and 5 m depth, located in a semi‐arid area (southern Spain), was surveyed on a daily basis for 1 year. The annual evaporation flux was 102·7 W m^?2, equivalent to an evaporated water depth of 1310 mm year^?1. The heat storage rate G exhibited a clear annual cycle with a peak gain in April (G ～ 45 W m^?2) and a peak loss in November (G ～ 40 W m^?2), leading to a marked annual hysteretic trend when evaporation (λE) was related to net radiation (R_n). λE was strongly correlated with the available energy A, representing 91% of the annual AWR energy loss. The sensible heat flux H accounted for the remaining 9%, leading to an annual Bowen ratio in the order of 0·10. The equilibrium and advective evaporation terms of the Penman formula represented 76 and 24%, respectively, of the total evaporation, corresponding to a annual value of the Priestley–Taylor (P–T) coefficient (α) of 1·32. The P–T coefficient presented a clear seasonal pattern, with a minimum of 1·23 (July) and a maximum of 1·65 (December), indicating that, during periods of limited available energy, AWR evaporation increased above the potential evaporation as a result of the advection process. Overall, the results stressed that accurate prediction of monthly evaporation by means of the P–T formula requires accounting for both the annual cycle of storage and the advective component. Some alternative approaches to estimating R_n, G and α are proposed and discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

The nature and transport of the fine‐grained component of Swift Creek Landslide,Northwest Washington

Extreme sedimentation in Swift Creek, located in the Cascades foothills in NW Washington (48°55′N, 122°16′W), results from erosion of the oversteepened, unvegetated toe of a large (55 hectares) active landslide. Deposition of landslide‐derived sediment has necessitated costly mitigation projects in the channel including annual dredging and temporary sediment traps in an attempt to reduce the risk of flooding and damage to man‐made structures downstream. This study attempts to understand the process of sediment production along with the corresponding erosion rates of the sediment source to help with the development of mitigation plans and construction of optimal sediment reservoirs. The bedload and suspended sediment in the creek are a direct result of the weathering process of the serpentinitic bedrock underlying the landslide. The serpentinite does not weather to smectite clay, as previously thought. Instead, it weathers to asbestiform chrysotile with minor amounts of chlorite, illite and hydrotalcite, all of which occur in clay seeps on the unvegetated surface of the landslide. The chrysotile fibers average 2 µm in length and make up at least 50%, by volume, of the suspended load transported in Swift Creek. This study does not address the environmental or health implications of the asbestiform chrysotile transport or deposition. During the sampled time between February 2005 and February 2006, 127 discrete suspended sediment samples were collected and discharge was measured 66 times. The suspended sediment concentrations ranged from 0·02 g L^?1 to 41·6 g L^?1 and the discharge ranged from 0·0 m³ s^?1 to 0·5 m³ s^?1. A nonlinear functional model estimated the total suspended sediment flux from detailed precipitation records and discrete suspended sediment concentration and discharge measurements to be 910 t km^?2 yr^?1. When the suspended sediment flux is coupled with estimates of downstream deposition of coarse sediment, the estimated erosion rate for the entire Swift Creek landslide is 158 mm yr^?1. The majority of the material entering Swift Creek is presumed to originate on the unvegetated toe of the landslide, for which the erosion rate is thus approximately 1 m yr^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

Zur ökonomischen Bedeutung der biologischen Selbstreinigung

In twelve flowing water (Q 1.04… 30.4 m³/s, 0.5… 1.2 m/s) the self-purification efficiency in 110 river sections (L 1.3… 26.4 km) is determined as the load difference in kg · d^?1 COD-Mn as well as in g · m^?3 referred to the daily passage. In the economical comparison, the self-purification efficiency is valued as substitution for wastewater treatment plants of the same capacity. At a mean specific capacity of 8.6 g · m^?3, the self-purification efficiency of the investigated waters is equivalent to economical values of 124 · 10³… 534 · 10³ M km^?1 investment costs, 11 · 10³… 80 · 10³ M · a^?1km^?1 operating costs and 5… 81 MWh · a^?1 km^?1 expenditure of energy. The specific capacity in g · m^?3 COD-Mn shows an exponential regression to the degree of saprobity (L = 0.015 · exp (1.7358 · S)). From this empirical model the limits of the self-purification capacity of aerobic waters by oxygen input can be detected: in respective examples more than 50% of the required oxygen input are due to weirs.     

The use of ablation‐dominated medial moraines as samplers for 10Be‐derived erosion rates of glacier valley walls,Kichatna Mountains,AK

We use cosmogenic ¹⁰Be concentrations in amalgamated rock samples from active, ice‐cored medial moraines to constrain glacial valley sidewall backwearing rates in the Kichatna Mountains, Alaska Range, Alaska. This dramatic landscape is carved into a small ～65 Ma granitic pluton about 100 km west of Denali, where kilometer‐tall rock walls and ‘cathedral’ spires tower over a radial array of over a dozen valley glaciers. These supraglacial landforms erode primarily by rockfall, but erosion rates are difficult to determine. We use cosmogenic ¹⁰Be to measure rockwall backwearing rates on timescales of 10³–10⁴ years, with a straightforward sampling strategy that exploits ablation‐dominated medial moraines. A medial moraine and its associated englacial debris serve as a conveyor system, bringing supraglacial rockfall debris from accumulation‐zone valley walls to the moraine crest in the ablation zone. We discuss quantitatively several factors that complicate interpretation of cosmogenic concentrations in this material, including the complex scaling of production rates in very steep terrain, the stochastic nature of the rockfall erosion process, the unmixed nature of the moraine sediment, and additional cosmogenic accumulation during transport of the sediment. We sampled medial moraines on each of three glaciers of different sizes and topographic aspects. All three moraines are sourced in areas with identical rock and similar sidewall relief of ～1 km. Each sample was amalgamated from 25 to 35 clasts collected over a 1‐km longitudinal transect of each moraine. Two of the glaciers yield similar ¹⁰Be concentrations (～1·6–2·2 × 10⁴ at/g) and minimum sidewall slope‐normal erosion rates (～0·5–0·7 mm/yr). The lowest ¹⁰Be concentrations (8 × 10³ at/g) and the highest erosion rates (1·3 mm/yr) come from the largest glacier in the range with the lowest late‐summer snowline. These rates are reasonable in an alpine glacial setting, and are much faster than long‐term exhumation rates of the western Alaska Range as determined by thermochronometric studies. Copyright © 2010 John Wiley & Sons, Ltd.     

Soil and water losses from new citrus orchards growing on sloped soils in the western Mediterranean basin

Ten representative research sites were selected in eastern Spain to assess soil erosion rates and processes in new citrus orchards on sloping soils. The experimental plots were located at representatives sites on limestone, in areas with 498 to 715 mm year^?1 mean annual rainfall, north‐facing slopes, herbicide treated, and new (less than 3 years old) plantations. Ten rainfall simulation experiments (1 h at 55 mm h^?1 on 0·25 m² plots) were carried out at each of the 10 selected study sites to determine the interill soil erosion and runoff rates. The 100 rainfall simulation tests (10 × 10 m) showed that ponding and runoff occurred in all the plots, and quickly: 121 and 195 s, respectively, following rainfall initiation. Runoff discharge was one third of the rainfall, and sediment concentration reached 10·4 g L^?1. The soil erosion rates were 2·4 Mg ha^?1 h^?1 under 5‐year return period rainfall thunderstorms. These are among the highest soil erosion rates measured in the western Mediterranean basin, similar to badland, mine spoil and road embankment land surfaces. The positive relationship between runoff discharge and sediment concentration (r² = 0·83) shows that the sediment availability is very high. Soil erosion rates on new citrus orchards growing on sloped soils are neither tolerable nor sustainable. Copyright © 2009 John Wiley & Sons, Ltd.