Metamorphic history and tectonic evolution of the Qinling Complex, eastern Qinling Mountains, China

Abstract The metamorphic history and tectonic evolution of the Qinling Complex is divided into formation and modification stages. During the Proterozoic formation stage, three deformational sequences are recognized. Andalusite–muscovite, sillimanite–muscovite and sillimanite–K-feldspar zones of amphibolite facies regional metamorphism are earlier than, or synchronous with the first or second phase of folding. Ductile shear zones were formed and Caledonian granites were emplaced during the modification stage. The granites superimposed contact aureoles (garnet–K-feldspar zone) on the regional metamorphic fabric.
Metamorphic reactions, P–T conditions of metamorphism and P–T–t paths were estimated by analysis of mineral textures and standard thermobarometric techniques. The P–T–t path of the Proterozoic tectonometamorphic cycle shows prominent clockwise decompression. The P–T–t path of the Caledonian tectonometamorphic cycle is characterized by an early rise of pressure and temperature, followed by isothermal decompression (rapid uplift) and finally with isobaric cooling.
The P–T–t paths of the two tectonometamorphic cycles reflect two major stages of collision and uplift in the evolution of the Qinling orogenic belt during the Proterozoic and Caledonian–Hercynian periods, respectively.     

Distinguishing and correlating multiple phases of metamorphism across a multiply deformed region using the axes of spiral, staircase and sigmoidal inclusion trails in garnet

Schists from the Appalachian Orogen in south-east Vermont have undergone multiple phases of garnet growth. These phases can be distinguished by the trend and relative timing of f oliation i nflexion or i ntersection a xes (FIAs) of foliations preserved as inclusion trails in garnet porphyroblasts. The relative timing of different generations of FIAs is determined from samples containing porphyroblasts with two or three differently trending FIAs developed outwards from core to rim (multi-FIA porphyroblasts). Schists from south-east Vermont show a consistent pattern of relative clockwise rotation of FIA trends from oldest to youngest. Four populations or sets of FIAs can be distinguished on the basis of their relative timings and trends. From oldest to youngest, the four sets have modal peaks trending SW–NE, W–E, NNW–SSE and SSW–NNE. These peaks show that each of the four FIA sets has a statistically consistent trend at all scales across a 35×125 km area containing numerous mesoscopic and macroscopic folds. The FIAs of Set 4 are defined by inclusion trails that are continuous with matrix foliations, have trends subparallel to most folds and are inferred to have developed contemporaneously with these structures. Conversely, Sets 1 to 3 are oblique to and pre-date most matrix foliations and folds. All four FIA sets occur in Siluro-Devonian rocks and must have formed in the Acadian Orogeny. The lack of statistically significant differences in the distribution of FIA trends across the study area and their consistent relative timings in multi-FIA porphyroblasts, despite a complex regional deformation history involving numerous phases of folding at all scales, suggest the porphyroblasts have not rotated relative to one another. The change in FIA trend with time resulted from rotation of the kinematic reference frame of bulk flow, possibly as a consequence of the reorganization of lithospheric plates responsible for Acadian orogenesis. Recognition of distinct generations of FIAs provides a means of distinguishing different phases of porphyroblast growth. Four periods of garnet porphyroblast growth occurred in the schists of south-east Vermont. This growth was heterogeneously distributed on the cm²–m² scale. No single porphyroblast records all stages of growth, and adjacent samples from the same or dissimilar rock types commonly contain porphyroblasts that preserve different sequences of growth. Factors that may have been responsible for switching porphyroblast growth on and off at this scale include: (i) subtle differences in bulk chemical composition; (ii) oscillating levels of heat, owing to the buffering effect of endothermic garnet-forming reactions; (iii) channelized infiltration of fluids with localized fluid buffering of bulk composition; and (iv) cyclic controls on the rates of diffusion and material transport of reactants, either by channelized fluid flow or by a changing pattern of microfracturing during foliation development. Consistency in FIA trend and relative timing provide a new method for potentially distinguishing and correlating successive metamorphic events, or even phases of metamorphism within a progressive tectonothermal event, along and across orogens. Using a consistent pattern of core to rim changes in FIA trend, multiple phases of growth of a single porphyroblastic mineral can be quantitatively distinguished, allowing correlation of different phases of growth around and across macroscopic folds. The relative timing of growth of different porphyroblastic minerals can also be quantitatively determined using FIA data and correlated around and across macroscopic folds. Conceptually, the paragenetic history preserved in each generation of porphyroblast growth, in the form of chemical zoning and the minerals in inclusion trails, could be combined to produce a more detailed P–T–t–deformation path than previously determined.     

The development of spiral‐shaped inclusion trails during multiple metamorphism and folding

Three periods of mineral growth and three generations of spiral‐shaped inclusion trails have been distinguished within folded rocks of the Qinling‐Dabie Orogen, China, using the development of three successive and differently trending sets of foliation intersection axes preserved in porphyroblasts (FIAs). This progression is revealed by the consistent relative sequence of changes in FIA trends from the core to rim of garnet porphyroblasts in samples with multiple FIAs. The first and second formed sets of FIAs trend oblique to the axial planes of macroscopic folds that dominate the outcrop pattern in this region. The porphyroblasts containing these FIAs grew prior to the development of the macroscopic folds, yet the FIAs do not change orientation across the fold hinges. The youngest formed FIAs (set 3) lie subparallel to the axial planes of these folds and the porphyroblasts containing these FIAs formed in part as the folds developed. The deformation associated with all three generations of spiral‐shaped inclusion trails in garnet porphyroblasts involved the formation of subhorizontal and subvertical foliations against porphyroblast rims accompanied by periods of garnet growth; pervasive structures have not necessarily formed in the matrix away from the porphyroblasts. The macroscopic folds are heterogeneously strained from limb to limb, doubly plunging and have moderately dipping axial planes. The consistent orientation of Set 1 FIAs indicates that the development of spiral‐shaped inclusion trails in porphyroblasts with FIAs belonging to Set 2 did not involve rotation of the previously formed porphyroblasts. The consistent orientation of Sets 1 and 2 FIAs indicate that the development of spiral‐shaped inclusion trails in porphyroblasts with FIAs belonging to Set 3 did not involve rotation of the previously formed porphyroblasts during folding. This requires a fold mechanism of progressive bulk inhomogeneous shortening and demonstrates that spiral‐shaped inclusion trails can form outside of shear zones.     

Tectonic evolution of the Karakoram metamorphic complex (NW Himalayas) reflected in the 3D structures of spiral garnets: Insights from X-ray computed micro-tomography

Spiral garnet porphyroblasts are known to record lengthy periods of deformation and metamorphism by preserving single or multiple FIAs (Foliation Intersection Axis) formed normal to tectonic shortening directions. Thanks to technological advances in X-ray computed micro-tomography (XCMT), FIAs can now be readily determined in relatively large samples in contrast to previous methods that require the preparation of a set of radial vertical and horizontal thin sections of samples. XCMT scanning not only alleviates tedious thin section based procedures but also illuminates the complete internal architecture of a rock sample allowing three-dimensional (3D) quantitative shape analysis of an individual porphyroblast as well as precise measurement of FIAs. We applied the technique to a sample from the Hunza Valley in the Karakoram metamorphic complex (KMC), NW Himalayas, containing numerous garnet porphyroblasts with spiral-shaped inclusion trails. The XCMT imaging reveals an E–W trending FIA within the sample, which is consistent with orthogonal N–S collision of the India-Kohistan Island Arc with Asia. Garnet long axes (X_GT) have variable plunges that define a broad sub-vertical maximum and a small sub-horizontal maximum. The X_GT principle maxima lie at N-090 and N-120. Smaller maxima lie at N-020 and N-340. Geometric relationships between X_GT axes and FIA orientation in the sample suggest that porphyroblast shapes are controlled by the geometry of the lens-shaped microlithons in which they tend to nucleate and grow. The orientation of inclusion trails and matrix foliations in the sample are correlated with three discrete tectono-metamorphic events that respectively produced andalusite, sillimanite and kyanite in the KMC. Late staurolite growth in the sample reveals how the rocks extruded to the surface via a significant role of roll-on tectonics, which can be correlated with the Central Himalayas.     

面理弯切轴测量技术在造山带研究中的应用——以美国阿肯色河地区为例

基于变形分解理论提出的面理弯切轴测量技术,通过对变斑晶中多期面理的测定分析,为厘定造山运动中的变形过程提供了新的精确定量研究手段。面理弯切轴数据已经被用于解决地质领域多种问题,例如:研究造山运动过程中变形变质历史以及在区域和造山带尺度对比多期变质作用;论证变斑晶生长过程是否发生旋转;变斑晶成核生长与区域变形过程之间的关系;重建板块运动历史过程;约束不同地质事件的发生时限;划分复杂变形分解类型以及岩浆侵位机制及时限研究。本文主要介绍面理弯切轴测量方法的原理、具体测定方法、研究意义及应用范围,并以美国阿肯色地区为例,详细介绍了面理弯切轴测量技术在造山运动过程区域变形历史重建中的应用。     

The tectono‐metamorphic evolution of the Balcooma Metamorphic Group,north‐eastern Australia: a multidisciplinary approach

The sequential growth of biotite, garnet, staurolite, kyanite, andalusite, cordierite and fibrolitic sillimanite, their microstructural relationships, foliation intersection axes preserved in porphyroblasts (FIAs), geochronology, P–T pseudosection (MnNCKFMASH system) modelling and geothermobarometry provide evidence for a P–T–t–D path that changes from clockwise to anticlockwise with time for the Balcooma Metamorphic Group. Growth of garnet at ～530 °C and 4.6 kbar during the N–S‐shortening event that formed FIA 1 was followed by staurolite, plagioclase and kyanite growth. The inclusions of garnet in staurolite porphyroblasts that formed during the development of FIAs 2 and 3 plus kyanite growth during FIA 3 reflect continuous crustal thickening from c. 443 to 425 Ma during an Early Silurian Benambran Orogenic event. The temperature and pressure increased during this time from ～530 °C and 4.6 kbar to ～630 °C and 6.2 kbar. The overprinting of garnet‐, staurolite‐ and kyanite‐bearing mineral assemblages by low‐pressure andalusite and cordierite assemblages implies ～4‐kbar decompression during Early Devonian exhumation of the Greenvale Province.     

Distinguishing and Correlating Multiple Phases of Metamorphism across Multiply Deformed Regions Using the Axes of Inclusion Trails in Porphyroblasts

Successions of FIAs(foliation inflection/intersection axes preserved within porphyroblasts) provide a relative time scale for deformation and metamorphism.In-situ dating of monazite grains preserved as inclusions within garnet and staurolite porphyroblasts within the foliations defining each FIA from such successions provides a rigorous approach to grouping ages that formed over extended periods of deformation and metamorphism.Matching age and FIA progressions confirms the suitability of this approach pl...     

The problem,significance and implications for metamorphism of 60 million years of multiple phases of staurolite growth

Microstructural measurements of FIAs in staurolite reveal at least 3 periods of growth in the Proterozoic Colorado Front Range and 5 in the Paleozoic Western Maine. Dated monazite inclusions in staurolite have an absolute age of 1760±12 Ma (FIA 1), 1720±7 Ma (FIA 2), 1682±18 Ma (FIA 3) in Colorado, and 408±10 Ma (FIA 2), 388±8 Ma (FIA 3), 372±6 Ma (FIA 4), 352±4 Ma (FIA 5) in Maine, supporting the multiple periods of deformation and metamorphism indicated by the FIA succession in each region. Multiple phases of growth by similar reactions in the same as well as in diverse adjacent rocks in both regions suggest that PT and X are not the only factors controlling the commencement and cessation of metamorphic reactions. The FIAs preserved by the staurolite porphyroblasts indicate that the local partitioning of deformation at the scale of a porphyroblast was the eventual controlling factor on whether or not the staurolite forming reactions took place.     

The problem, significance and implications for metamorphism of 60 million years of multiple phases of staurolite growth

Microstructural measurements of FIAs in staurolite reveal at least 3 periods of growth in the Proterozoic Colorado Front Range and 5 in the Paleozoic Western Maine. Dated monazite inclusions in staurolite have an absolute age of 1760±12 Ma (FIA 1), 1720±7 Ma (FIA 2), 1682±18 Ma (FIA 3) in Colorado, and 408±10 Ma (FIA 2), 388±8 Ma (FIA 3), 372±6 Ma (FIA 4), 352±4 Ma (FIA 5) in Maine, supporting the multiple periods of deformation and metamorphism indicated by the FIA succession in each region. Multiple phases of growth by similar reactions in the same as well as in diverse adjacent rocks in both regions suggest that PT and X are not the only factors controlling the commencement and cessation of metamorphic reactions. The FIAs preserved by the staurolite porphyroblasts indicate that the local partitioning of deformation at the scale of a porphyroblast was the eventual controlling factor on whether or not the staurolite forming reactions took place.     

Correlating multiple deformation events across the Mesoproterozoic NE Australia using foliation intersection axes (FIA) preserved within porphyroblasts

Foliation Intersection/Inflection Axes within porphyroblasts (FIAs) allow the chronological and kinematic linking of deformation episodes with associated metamorphism. Measurement of FIAs in the Mesoproterozoic Eastern Fold Belt (EFB) of the Mount Isa Inlier, NE Australia, has revealed phases of deformation and metamorphism that could not previously be distinguished from one another. Both the ‘asymmetry switch’ and ‘FitPitch’ FIA measurement techniques have been applied to key localities of polymetamorphosed and multiply deformed EFB, and they yielded the same result. These independent techniques have revealed (1) E–W trending structures that formed during N–S bulk shortening (D₁) and associated metamorphism (M₁) formed during a period of orogenesis (O₁) and N–S oriented structures that formed during E–W bulk shortening (D₂) and associated metamorphism (M₂) during a period of orogenesis (O₂), and (2) the crustal scale tectonic processes associated with polymetamorphism. Middle to upper amphibolite facies metamorphic conditions occurred during O₁ with crustal thickening followed by near-isothermal decompression leading to low-pressure/high-temperature (LP/HT) conditions with the emplacement of Williams and Naraku Batholiths around 1550 Ma. This was followed by a second period of middle-to upper-amphibolite facies metamorphism, O₂. This history not only correlates better across the EFB, but also with the tectono-metamorphic model recently proposed for the Mesoproterozoic Georgetown Inlier of the north Australian Craton.     

The Alpine geodynamic evolution of Penninic nappes in the eastern Central Alps

The eastern Central Alps consist of several Pennine nappes with different tectonometamorphic histories. The tectonically uppermost units (oceanic Avers Bündnerschiefer, continental Suretta and Tambo nappes, oceanic Vals Bündnerschiefer) show Cretaceous/early Tertiary W-directed thrusting with associated blueschist facies metamorphism related to subduction of the Pennine units beneath the Austroalpine continental crust. This event caused eclogite facies metamorphism in the underlying continental Adula nappe. The gross effect was crustal thickening. The tectonically lower, continental Simano nappe is devoid of any imprint from this event. In the course of continent-continent collision, high- T metamorphism and N-directed movements occurred. Both affected the whole nappe pile more or less continuously from amphibolite to greenschist facies conditions. Crustal thinning commenced during the regional temperature peak. A final phase is related to differential uplift under retrograde P–T conditions. Further thinning of the crust was accommodated by E- to NE-directed extensional deformation.     

运动方向的线状指示物与斑变晶中叶理交切轴(FIAs)的比较及其与板块相对运动方向的关系(英文)

过去还无人指出过板块相对运动的方向与缓倾斜叶理、逆断层和断层上的线状指示物有直接关系,这是因为缓倾斜构造上的运动方向只和变厚了的造山地层的重力塌陷有关,它们和俯冲板块传递给仰冲板块的推力没有关系。缓倾斜叶理上的运动方向的线状指示物和斑状变晶中的叶理弯曲或叶理交切轴（FIA）并无直接关系,这是因为FIA的指向受缓倾斜叶理和斑状变晶边缘上产生的、近乎垂直的叶理之间的交切面控制。在班状变晶边缘上形成的、近乎垂直的叶理在基质中的方位可能在较大范围内变动,因为它们会在稍早期间形成的叶理再活化作用影响下发生转动或遭到破坏。斑状变晶边缘上近乎垂直的叶理,与形成于早期或晚期的缓倾斜叶理的交线,在后期的生长中被圈闭在班状变晶里,此交线规定出了FIA的方位,而与叶理上的运动方向无关。从美国佛蒙特州阿巴拉契亚山脉采集的FIA资料指出,在125km×35km的一片地区内,在该地岩层所发生的多次变形中,从未曾使早期形成的FIA组的方位发生变动。这种情况要求：后来的每一代褶皱都是由于渐进的。总体不均匀缩短作用造成的。这种情况表明：FIA保存着原始的运动方向,此方向未因以后的变形而转动。非洲板块与欧洲板块的相对运动方向和由阿尔卑斯期变质岩中叶理交切轴（FIAs）所指示     

P–T–t paths and tectonic history of an early Precambrian granulite facies terrane, Jining district, south-east Inner Mongolia, China

Abstract The widespread khondalite series of south-east Inner Mongolia consists largely of biotite–sillimanite–garnet gneiss and quartzo-feldspathic gneiss with some marble and mafic granulite layers. It has experienced two metamorphic events at c. 2500 and 1900–2000 Ma.
A pre-peak stage of the first metamorphism at T = 600–700°C and P > 6–7 kbar is recognized by the relict amphibolite facies assemblage Ky–Grt–Bt–Pl–Qtz and 'protected'inclusions of biotite, hornblende, sodic plagioclase and quartz in garnet or orthopyroxene. The peak stage, with T = c. 800 ± 50°C and P 8–10 kbar, is characterized by the widespread granulite facies assemblages Sil–Grt–Bt–Kfs–Pl–Qtz in gneiss and Opx–Cpx–Pl ± Hbl ± Grt in granulite. The P–T–t path suggests that the supracrustal sequence was buried in the lower crust by tectonic thickening during D1–D2.
The beginning of the second metamorphism is characterized by further temperature rise to 700°C or more at lower pressure. This stage is manifested by the appearance of cordierite after garnet, fibrolite (Sil2) after biotite in gneiss and transformation of Hbl1 into Opx2 and Cpx2 in granulite. Coronas of symplectitic Opx2 + Pl2 surrounding Grt1 and Cpx1 in mafic granulite are interpreted as products of near-isothermal decompression. The P–T–t path may be related tectonically to waning extension of the crust by the end of the early Proterozoic.     

Metamorphic evolution of the southern part of the Hidaka belt, Hokkaido, Japan

Abstract The Hidaka metamorphic terrane in the Meguro-Shoya area, Hokkaido, Japan is divided into four progressive metamorphic zones: A—biotite zone; B—cordierite zone; C—cordierite–K-feldspar zone; and, D—sillimanite–K-feldspar zone of the andalusite–sillimanite facies series type of metamorphism. The metamorphic grade ranges from the higher temperature part of the greenschist facies (zone A) through the amphibolite facies (zones B and C) to the lower temperature part of the granulite facies (zone D). The zone boundaries intersect the bedding planes at high angles. P–T conditions estimated are 450–550°C and 2 kbar for zone A, 550–600°C and 2–2.5 kbar for zone B, 600–650°C and 2.5–3 kbar for zone C and 650–750°C and 3–4 kbar for zone D. The metapelites of zone D were partially melted.
At the later stage of the regional metamorphism which is early Oligocene to early Miocene in age, cordierite tonalite and biotite tonalite intrusives associated with segments of the highest grade rocks (zone D) were emplaced into the lower temperature part of the regional metamorphic rocks, giving rise to a contact metamorphic aureole. The thermally metamorphosed terrain (zone C') belongs to the amphibolite facies and its P–T conditions are estimated to have been 550–700°C and 2 kbar.
The P–T–t paths of the Hidaka metamorphism show a thickening–heating–uplifting process. The metamorphism is inferred to have taken place beneath an active island arc accompanied by partial melting of the crust.     

Low-P / high-T metamorphism in the Okiep Copper District, western Namaqualand, South Africa

The Okiep Copper District, part of the 1.2–1.0 Ga high-grade terrane in western Namaqualand, is composed of a mid-Proterozoic supracrustal sequence and several pre- to post-orogenic intrusive suites affected by two high-grade events (M2a/M2b, M3) of Kibaran and one low-grade event (M4) of Pan-African age. Peak assemblages in quartz-bearing pelites are characterized either by garnet+cordierite coexisting with sillimanite/biotite, or by biotite+sillimanite±garnet; a difference controlled by bulk composition and variation in water activities (0.1–0.7) during dehydration melting. Maximum P–T conditions were reached during M2a coevally with the major deformational event (D2a) and are estimated at 750–820  °C and 5–6  kbar. A counterclockwise P–T  path is indicated by regionally occurring pseudomorphs of sillimanite after andalusite and by prograde reaction textures preserved as relics in M2a porphyroblasts. Two stages of retrograde metamorphism are distinguished: M2a garnet+cordierite-bearing assemblages were retrogressed to biotite+sillimanite+quartz (M2b) along discontinuous foliation planes and shear zones (D2b). Retrograde M3 corona assemblages formed at similar P–T  conditions (580–660  °C and 5.8±0.5  kbar) to the M2b assemblages but M3 crystallization postdates penetrative D2 deformation, intrusion of 1.06 Ga granitoids and formation of associated W–Mo deposits. It is concluded that: (a) Kibaran high-grade metamorphism in the Okiep Copper District is thermally punctuated and (b) reaction textures documenting apparent isobaric cooling of this low- P high- T  terrane must be interpreted with caution.     

Behaviour of rigid objects during deformation and metamorphism: a test using schists from the Bolton syncline, Connecticut, USA

The behaviour of spherical versus highly ellipsoidal rigid objects in folded rocks relative to one another or the Earth’s surface is of particular significance for metamorphic and structural geologists. Two common porphyroblastic minerals, garnet and staurolite, approximate spherical and highly ellipsoidal shapes respectively. The motion of both phases is analysed using the axes of inflexion or intersection of one or more foliations preserved as inclusion trails within them (we call these axes FIAs, for foliation inflexion/intersection axes). For staurolite, this motion can also be compared with the distribution of the long axes of the crystals. Schists from the regionally shallowly plunging Bolton syncline commonly contain garnet and staurolite porphyroblasts, whose FIAs have been measured in the same sample. Garnet porphyroblasts pre-date this fold as they have inclusion trails truncated by all matrix foliations that trend parallel to the strike of the axial plane. However, they have remarkably consistent FIA trends from limb to limb. The FIAs trend 175° and lie 25°NNW from the 020° strike of the axial trace of the Bolton syncline. The plunge of these FIAs was determined for six samples and all lie within 30° of the horizontal. Eleven of these samples also contain staurolite porphyroblasts, which grew before, during and after formation of the Bolton syncline as they contain inclusion trails continuous with matrix foliations that strike parallel to the axial trace of this fold. The staurolite FIAs have an average trend of 035°, 15°NE from the 020° strike of the axial plane of this fold. The total amount of inclusion trail curvature in staurolite porphyroblasts, about the axis of relative rotation between staurolite and the matrix (i.e. the FIA), is greater than the angular spread of garnet FIAs. Although staurolite porphyroblasts have ellipsoidal shapes, their long axes exhibit no tendency to be preferentially aligned with respect to the main matrix foliation or to the trend of their FIA. This indicates that the axis of relative rotation, between porphyroblast and matrix (the FIA), was not parallel to the long axis of the crystals. It also suggests that the porphyroblasts were not preferentially rotated towards a single stretch direction during progressive deformation. Five overprinting crenulation cleavages are preserved in the matrix of rocks from the Bolton syncline and many of these result from deformation events that post-date development of this fold. Staurolite porphyroblast growth occurred during the development of all of these deformations, most of which produced foliations. Staurolite has overgrown, and preserved as helicitic inclusions, crenulated and crenulation cleavages; i.e. some inclusion trail curvature pre-dates porphyroblast growth. The deformations accompanying staurolite growth involved reversals in shear sense and changing kinematic reference frames. These relationships cannot all be explained by current models of rotation of either, or both, the garnet and staurolite porphyroblasts. In contrast, we suggest that the relationships are consistent with models of deformation paths that involve non-rotation of porphyroblasts relative to some external reference frame. Further, we suggest there is no difference in the behaviour of spherical or ellipsoidal rigid objects during ductile deformation, and that neither garnet nor staurolite have rotated in schists from the Bolton syncline during the multiple deformation events that include and post-date the development of this fold.     

A long‐lived metamorphic history in the contact aureole of the Mooselookmeguntic pluton revealed by in situ dating of monazite grains preserved as inclusions in staurolite porphyroblasts

Emplacement of the Mooselookmeguntic pluton, located in the western Maine region of the northern Appalachians, was thought to have occurred towards the end of the Acadian deformation at around 370 Ma. Crystallization ages from different parts of the pluton suggest a more sequential emplacement history over a period of c. 20 Myr. Foliation inflection/intersection axes (FIAs) within porphyroblasts from its aureole reveal at least five periods of garnet and staurolite growth. The orientation of FIAs in both garnet and staurolite porphyroblasts trend successively from ESE–WNW, NNW–SSE, E–W, ENE–WSW to NE–SW. Electron probe microanalysis dating of monazite grains included in staurolite porphyroblasts containing one of these five periods of FIA development reveals a succession of apparent ages from 410 Ma to 345 Ma. A similar spread of crystallization ages can be observed for plutons from Maine and adjacent regions. This succession indicates that deformation and metamorphism began well before and continued long after what is classically regarded as the Acadian orogeny. The thermal structure of the orogen progressively evolved to enable pluton emplacement, and it continued to develop afterwards with magmatic fluids still forming at depth.     

Resolving the Routine Presence of Kyanite,Andalusite and Sillimanite across a Region using Foliation Intersection/Inflection Axes Preserved in Porphyroblasts,Petrographic Observations and Thermobarometry

Constraints from P-T pseudosections (MnNCKFMASH system), foliation intersection/inflection axes preserved in porphyroblasts (FIAs), mineral assemblages and textural relationships for rocks containing all three Al2SiO5 polymorphs indicate a kyanite→ andalusite→ sillimanite sequential formation at different times rather than stable coexistence at the Al2SiO5 triple point. All three Al2SiO5 polymorphs grew in the Chl, Bt, Ms, Grt, St, Pl and Crd bearing Ordovician Clayhole Schist in Balcooma, northeastern Australia separately along a looped P-T-t-D path that swaps from clockwise to anticlockwise in the tectono-metamorphic history of the region. Kyanite grew during crustal thickening in an Early Silurian Orogenic event followed by decompression/heating, andalusite and fibrolitic sillimanite growth during Early Devonian exhumation.     

Measurement and correlation of microstructures: the case of foliation intersection axes

Recent studies have used the relative rotation axis of sigmoidal and spiral‐shaped inclusion trails, known as Foliation Inflexion/Intersection Axis (FIA), to investigate geological processes such as fold mechanisms and porphyroblast growth. The geological usefulness of this method depends upon the accurate measurement of FIA orientations and correct correlation of temporally related FIAs. This paper uses new data from the Canton Schist to assess the variation in FIA orientations within and between samples, and evaluates criteria for correlating FIAs. For the first time, an entire data set of FIA measurements is published, and data are presented in a way that reflects the variation in FIA orientations within individual samples and provides an indication of the reliability of the data. Analysis of 61 FIA trends determined from the Canton Schist indicate a minimum intrasample range in FIA orientations of 30°. Three competing models are presented for correlation of these FIAs, and each of the models employ different correlation criteria. Correlation of FIAs in Model 1 is based on relative timing and textural criteria, while Model 2 uses relative timing, orientation and patterns of changing FIA orientations, and Model 3 uses relative timing and FIA orientation as correlation criteria. Importantly, the three models differ in the spread of FIA orientations within individual sets, and the number of sets distinguished in the data. Relative timing is the most reliable criterion for correlation, followed by textural criteria and patterns of changing FIA orientations from core to rim of porphyroblasts. It is proposed that within a set of temporally related FIAs, the typical spread of orientations involves clustering of data in a 60° range, but outliers occur at other orientations including near‐normal to the peak distribution. Consequently, in populations of FIA data that contain a wide range of orientations, correlation on the basis of orientation is unreliable in the absence of additional criteria. The results of this study suggest that FIAs are best used as semiquantitative indicators of bulk trends rather than an exact measurement for the purpose of quantitative analyses.     

Formation of eclogite, and reaction during exhumation to mid-crustal levels, Snowbird tectonic zone, western Canadian Shield

A re‐evaluation of the P–T history of eclogite within the East Athabasca granulite terrane of the Snowbird tectonic zone, northern Saskatchewan, Canada was undertaken. Using calculated pseudosections in combination with new garnet–clinopyroxene and zircon and rutile trace element thermometry, peak metamorphic conditions are constrained to ～16 kbar and 750 °C, followed by near‐isothermal decompression to ～10 kbar. Associated with the eclogite are two types of occurrences of sapphirine‐bearing rocks preserving a rich variety of reaction textures that allow examination of the retrograde history below 10 kbar. The first occurs as a 1–2 m zone adjacent to the eclogite body with a peak assemblage of garnet–kyanite–quartz interpreted to have formed during the eclogite facies metamorphism. Rims of orthopyroxene and plagioclase developed around garnet, and sapphirine–plagioclase and spinel–plagioclase symplectites developed around kyanite. The second variety of sapphirine‐bearing rocks occurs in kyanite veins within the eclogite. The veins involve orthopyroxene, garnet and plagioclase layers spatially organized around a central kyanite layer that are interpreted to have formed following the eclogite facies metamorphism. The layering has itself been modified, with, in particular, kyanite being replaced by sapphirine–plagioclase, spinel–plagioclase and corundum–plagioclase symplectites, as well as the kyanite being replaced by sillimanite. Petrological modelling in the CFMAS system examining chemical potential gradients between kyanite and surrounding quartz indicates that these vein textures probably formed during further essentially isothermal decompression, ultimately reaching ～7 kbar and 750 °C. These results indicate that the final reaction in these rocks occurred at mid‐crustal levels at upper amphibolite facies conditions. Previous geochronological and thermochronological constraints bracket the time interval of decompression to <5–10 Myr, indicating that ～25 km of exhumation took place during this interval. This corresponds to minimum unroofing rates of ～2–5 mm year^?1 following eclogite facies metamorphism, after which the rocks resided at mid‐crustal levels for 80–100 Myr.