Characteristics of an open coast tidal flat: Example from Daman,west coast of India

This study highlights lithofacies and biofacies characteristics of the open coast tidal flat near Daman on the eastern flank of Gulf of Khambhat. Sedimentological and biological observation record six facies within the tidal flat area including older beach, beach face, sand flat, mud flat/mixed flat, sand bar and beach rock. Distinct sedimentary structures, foraminiferal assemblage and bioturbation intensity characterize each facies. A wide variety of wave and current generated sedimentary features characterize the sand flat facies. Semiconsolidated sands of older beach running parallel the coastline at a level higher than the present beach face possibly records the latest sea level highstand. The beach rock reflects early cementation of sands in tropical environments. Foraminifera are widely distributed in sand flats, mixed flats and mud flats and grouped into two biofacies — Ammonia-Elphidium-Quinqueloculina biofacies (sand flat and mixed flat) and Trochammina-Miliammina biofacies (mud flats). The beach face and sand bar facies contain forminifera reworked from sand flat and mud/mixed flat. Seasonal variation in depositional style is marked by deposition of fresh mud deposited over large areas of the intertidal flat during monsoon time, most of which is washed away by waves and current actions well before the onset of the next monsoon.     

Oceanographic controls on shallow‐water temperate carbonate sedimentation: Spencer Gulf,South Australia

Spencer Gulf is a large (ca 22 000 km²), shallow (<60 m water depth) embayment with active heterozoan carbonate sedimentation. Gulf waters are metahaline (salinities 39 to 47‰) and warm‐temperate (ca 12 to ?28°C) with inverse estuarine circulation. The integrated approach of facies analysis paired with high‐resolution, monthly oceanographic data sets is used to pinpoint controls on sedimentation patterns with more confidence than heretofore possible for temperate systems. Biofragments – mainly bivalves, benthic foraminifera, bryozoans, coralline algae and echinoids – accumulate in five benthic environments: luxuriant seagrass meadows, patchy seagrass sand flats, rhodolith pavements, open gravel/sand plains and muddy seafloors. The biotic diversity of Spencer Gulf is remarkably high, considering the elevated seawater salinities. Echinoids and coralline algae (traditionally considered stenohaline organisms) are ubiquitous. Euphotic zone depth is interpreted as the primary control on environmental distribution, whereas seawater salinity, temperature, hydrodynamics and nutrient availability are viewed as secondary controls. Luxuriant seagrass meadows with carbonate muddy sands dominate brightly lit seafloors where waters have relatively low nutrient concentrations (ca 0 to 1 mg Chl‐a m^?3). Low‐diversity bivalve‐dominated deposits occur in meadows with highest seawater salinities and temperatures (43 to 47‰, up to 28°C). Patchy seagrass sand flats cover less‐illuminated seafloors. Open gravel/sand plains contain coarse bivalve–bryozoan sediments, interpreted as subphotic deposits, in waters with near normal marine salinities and moderate trophic resources (0·5 to 1·6 mg Chl‐a m^?3) to support diverse suspension feeders. Rhodolith pavements (coralline algal gravels) form where seagrass growth is arrested, either because of decreased water clarity due to elevated nutrients and associated phytoplankton growth (0·6 to 2 mg Chl‐a m^?3), or bottom waters that are too energetic for seagrasses (currents up to 2 m sec^?1). Muddy seafloors occur in low‐energy areas below the euphotic zone. The relationships between oceanographic influences and depositional patterns outlined in Spencer Gulf are valuable for environmental interpretations of other recent and ancient (particularly Neogene) high‐salinity and temperate carbonate systems worldwide.     

Carbonates calibrated against oceanographic parameters along a latitudinal transect in the Gulf of California, Mexico

Trophic resources are an important control governing carbonate production. Though this importance has long been recognized, no calibration exists to quantitatively compare biogenic assemblages within trophic resource fields. This study presents a field calibration of carbonate producers in a range of settings against high‐resolution in situ measurements of nutrients, temperature and salinity. With its latitudinal extent from 30° to 23° N, the Gulf of California, Mexico, spans the warm‐temperate realm and encompasses nutrient regimes from oligo‐mesotrophic in the south to eutrophic in the north. Accordingly, from south to north carbonates are characterized by: (i) coral‐dominated shallow carbonate factories (5–20 m water depth) with average sea‐surface temperatures of 25 °C (min. 18 °C, max. 31 °C), average salinities of 35·06‰ and average chlorophyll a levels, which are a proxy for nutrients, of 0·25 mg Chl a m^?3 (max. 0·48, min. 0·1). (ii) Red algal‐dominated subtidal to inner‐shelf carbonate formation (10–25 m) in the central Gulf of California exhibiting average temperatures of 23 °C (min. 18 °C, max. 30 °C), average salinities of 35·25‰, and average Chl a levels of 0·71 Chl a m^?3 (max. 5·62, min. 0). (iii) Molluskan bryozoan‐rich inner to outer shelf factories in the northern Gulf of California (20–50 m) with average sea surface temperatures of only 20 °C (min. 13 °C, max 29 °C), average salinities of 35·01‰, and average contents of 2·2 mg Chl a m^?3 (max. 8·38, min. 0). By calibrating sedimentological data with in situ measured oceanographic information in different environments, the response of carbonate producers to environmental parameters was established and extrapolated to carbonates on a global scale. The results demonstrate the importance of recognizing and quantifying trophic resources as a dominant control determining the biogenic composition and facies character of both modern and fossil carbonates.     

An experimental investigation of sand–mud suspension settling behaviour: implications for bimodal mud contents of submarine flow deposits

The settling behaviour of particulate suspensions and their deposits has been documented using a series of settling tube experiments. Suspensions comprised saline solution and noncohesive glass‐ballotini sand of particle size 35·5 μm < d < 250 μm and volume fractions, φ_s, up to 0·6 and cohesive kaolinite clay of particle size d < 35·5 μm and volume fractions, φ_m, up to 0·15. Five texturally distinct deposits were found, associated with different settling regimes: (I) clean, graded sand beds produced by incremental deposition under unhindered or hindered settling conditions; (II) partially graded, clean sand beds with an ungraded base and a graded top, produced by incremental deposition under hindered settling conditions; (III) graded muddy sands produced by compaction with significant particle sorting by elutriation; (IV) ungraded clean sand produced by compaction and (V) ungraded muddy sand produced by compaction. A transition from particle size segregation (regime I) to suppressed size segregation (regime II or III) to virtually no size segregation (IV or V) occurred as sediment concentration was increased. In noncohesive particulate suspensions, segregation was initially suppressed at φ_s ～ 0·2 and entirely inhibited at φ_s ≥ 0·6. In noncohesive and cohesive mixtures with low sand concentrations (φ_s < 0·2), particle segregation was initially suppressed at φ_m ～ 0·07 and entirely suppressed at φ_m ≥ 0·13. The experimental results have a number of implications for the depositional dynamics of submarine sediment gravity flows and other particulate flows that carry sand and mud; because the influence of moving flow is ignored in these experiments, the results will only be applicable to flows in which settling processes, in the depositional boundary, dominate over shear‐flow processes, as might be the case for rapidly decelerating currents with high suspended load fallout rates. The ‘abrupt’ change in settling regimes between regime I and V, over a relatively small change in mud concentration (<5% by volume), favours the development of either mud‐poor, graded sandy deposits or mud‐rich, ungraded sandy deposits. This may explain the bimodality in sediment texture (clean ‘turbidite’ or muddy ‘debrite’ sand or sandstone) found in some turbidite systems. Furthermore, it supports the notion that distal ‘linked’ debrites could form because of a relatively small increase in the mud concentration of turbidity currents, perhaps associated with erosion of a muddy sea floor. Ungraded, clean sand deposits were formed by noncohesive suspensions with concentrations 0·2 ≤ φ_s ≤ 0·4. Hydrodynamic sorting is interpreted as being suppressed in this case by relatively high bed aggradation rates which could also occur in association with sustained, stratified turbidity currents or noncohesive debris flows with relatively high near‐bed sediment concentrations.     

Quartz-sandy, grazing-contoured stromatolites from coastal embayments of Mauritania, West Africa

A new occurrence of Recent stromatolites different from those known up to now has been discovered on tidal flats of the Bay of Saint-Jean (near Cape Timiris). Their most remarkable features are predominance of quartz sand instead of carbonate, characteristic surface-contouring by grazing fish, absence of cementation, intensive reworking by crabs, and connection with saline sabkha deposits. Entrapment of sand grains and great resistance of the algal sheaths are most important for stromatolitic growth, although today destruction appears to prevail over accretion. Quartz sand of aeolian dunes and carbonatic pellets of aragonitic ooze feeders are the main constituents of the stromatolitic sediments. According to the tidal range the following zonation of the algal mat exists: (A) knoll and cuspate zone, (B) flat zone, (C) gas-domed zone, and (D) crinkle zone.     

Holocene and Pleistocene fringing reef growth and the role of accommodation space and exposure to waves and currents (Bora Bora,Society Islands,French Polynesia)

Holocene fringing reef development around Bora Bora is controlled by variations in accommodation space (as a function of sea‐level and antecedent topography) and exposure to waves and currents. Subsidence ranged from 0 to 0·11 m kyr^?1, and did not create significant accommodation space. A windward fringing reef started to grow 8·7 kyr bp , retrograded towards the coast over a Pleistocene fringing reef until ca 6·0 kyr bp , and then prograded towards the lagoon after sea‐level had reached its present level. The retrograding portion of the reef is dominated by corals, calcareous algae and microbialite frameworks; the prograding portion is largely detrital. The reef is up to 13·5 m thick and accreted vertically with an average rate of 3·12 m kyr^?1. Lateral growth amounts to 13·3 m kyr^?1. Reef corals are dominated by an inner Pocillopora assemblage and an outer Acropora assemblage. Both assemblages comprise thick crusts of coralline algae. Palaeobathymetry suggests deposition in 0 to 10 m depth. An underlying Pleistocene fringing reef formed during the sea‐level highstand of Marine Isotope Stage 5e, and is also characterized by the occurrence of corals, coralline algal crusts and microbialites. A previously investigated, leeward fringing reef started to form contemporaneously (8·78 kyr bp ), but is thicker (up to 20 m) and solely prograded throughout the Holocene. A shallow Pocillopora assemblage and a deeper water Montipora assemblage were identified, but detrital facies dominate. At the Holocene reef base, only basalt was recovered. The Holocene windward–leeward differences are a consequence of less accommodation space on the eastern island side that eventually led to a more complex reef architecture. As a result of higher rates of exposure and flushing, the reef framework on the windward island side is more abundant and experienced stronger cementation. In the Pleistocene, the environmental conditions on the leeward island side were presumably unfavourable for fringing reef growth.     

Quaternary sedimentology of the Rose Creek fan delta, Walker Lake, Nevada, USA, and implications to fan-delta facies models

The 3·2 km long Rose Creek fan delta of west‐central Nevada is prograding from an active rift margin into the 32 m deep Walker Lake. A case study of the forms, processes and facies of this fan delta reveals that the proximal and medial zones mainly are of sub‐aerial origin, and the distal zone is of lacustrine origin. Pebbly to bouldery rock‐avalanche mounds >100 m thick (Facies A) and muddy to bouldery debris flow levées 0·5 to 2·0 m thick (Facies B) dominate the proximal zone, whereas mostly matrix‐supported cobbly pebbly debris flow lobes 0·1 to 1·0 m thick (Facies C) typify the medial zone. Surficial pebble lags and gully fills (Facies D) are widespread in both zones but, in exposures, comprise only partings or lenticles between debris flow units. The distal fan delta mainly consists of lakeshore to lake‐bottom tracts formed by extensive wave reworking of debris flow facies. Nearshore deposits include erosional cobbly boulder lag beaches (Facies E), pebbly constructional beaches attached at headcuts or on barrier spits (Facies F), pebbly upper shoreface (Facies G) and sandy lower shoreface (Facies H) tracts positioned lakeward of the beach, and pebbly landward‐dipping foresets (Facies I) and backshore‐pond sand and mud (Facies J) present landward of the spits. Erosional lag beaches fringe the windward north side of the fan‐delta front, attached constructional beaches characterize the central zone, and southward‐elongating barrier spits typify the leeward south side, extending from the zone of greatest projection of the fan delta into the lake. Shoreline facies asymmetry results from largely unidirectional longshore drift caused by high fetch to the north and minimal fetch to the south, combined with the arcuate shape of the fan‐delta front. The spits overlie a platform deposited below common wave base consisting of south‐east‐trending cones of pebbly Gilbert foresets (Facies K) and sandy toesets (Facies L). Typically slumped silt and mud (Facies M) fringe both this platform and lower shoreface sand in deeper water. This case demonstrates facies types and patterns that are inconsistent with the widely promoted fan‐delta facies model having a front consisting of an apron of radially directed Gilbert foresets deposited where sub‐aerial flows enter the lake. The Rose Creek fan‐delta front instead features a sharp contact between sub‐aerial and lakeshore facies formed where waves erode, sort and redistribute heterogeneous debris flow sediment into the various shallow‐to‐deep lake facies. Gilbert foresets are present only in the lee of the fan delta where sediment moving by longshore drift reaches the brink of the spit front. This facies scenario results from the infrequency of fan‐building events versus nearly constant wind‐induced waves, a scenario that, in contrast to the popular Gilbert model, probably is the norm for fan deltas. The level of Walker Lake, and thus the position of wave reworking on the Rose Creek fan delta, fluctuated over a range of ～157 m during the last 18 kyr, producing complex interfingering between sub‐aerial and lakeshore facies across a 1700 m wide radial belt, typifying a wave‐modified, freestand lacustrine fan delta.     

A multivariate sedimentary environmental analysis of Great South Bay and South Oyster Bay, New York

A multivariate statistical strategy for classifying paleoenvironments is effective for studying modern sedimentary processes in western Great South Bay and South Oyster Bay, New York. The 13 whole phi weight percent variables were tested for redundancy with R-mode cluster analysis. The samples were partitioned statistically into five environmentally significant facies using Q-mode cluster analysis: (A)sandy gravel, (B)sandy silt, (C)silty sand, (D)slightly gravelly sand, and (E)fine sand. An ordination depicted gradational relationships among the samples and the facies. It was used to evaluate the environmental and textural parameter gradients within the sample space. Interpretations obtained in this manner and by examination of the grain-size curves suggest that these sediments were deposited by waves and currents on beaches and in wave zones (facies C and E),shoal areas (facies B),and tidal channels (facies A and D).Tidal currents, wave action, and eelgrass control the distribution of sediments within the two bays.     

Theoretical and measured aeolian sand transport on a barrier island, Louisiana, USA

Over the past 100 years, the Isles Dernieres, a low lying barrier island chain along the coast of central Louisiana, Usa , has undergone more than 1 km of northward beach face retreat with the loss of 70% of its surface area. The erosion results from a long term relative sea level rise coupled with day to day wind and wave action that ultimately favours erosion over deposition. At a site in the central Isles Dernieres, 8 days of wind and beach profile measurements during the passage of one winter cold front documented aeolian erosion and deposition patterns under both onshore and offshore winds. For offshore winds, the theoretical erosion rate, based on wind shear velocity, closely matched the measured erosion rate; for onshore winds, the theoretical rate matched the measured rate only after being corrected by a factor that accounted for beach face morphology. In late February 1989, a strong cold front moved into coastal Louisiana. That cold front stalled over the Gulf of Mexico, resulting in 4 days of strong northerly winds at a study site on the Isles Dernieres. During those 4 days, the wind moved sand from the backshore to the upper beach face. When the cold front finally moved out of the area, the wind shifted to the south and decreased in strength. The onshore wind then restored some of the upper beach face sand to the backshore while increased wave activity moved the rest into the nearshore. The theoretical estimate of 1·28 m³ m^?1 for the rate of sand transport by the northerly wind compares well with the measured backshore erosion rate of 1·26 m³ m^?1, which was determined by comparing beach profiles from the start and end of the period of northerly winds. The theoretical estimate of 0·04 m³ m^?1 for the rate of sand transport by the southerly wind, however, is notably less than the measured rate of 0·45 m³ m^?1. The large discrepancy between the two rates can be explained by a difference in the shear velocity of the wind between the beach face, where the erosion occurred, and the backshore, where the wind stress was measured. Using an empirical relationship for the wind shear drag coefficient as a function of coastal environment, the theoretical estimate for the rate of sand transport by the southerly wind becomes 0·44 m³ m^?1     

South Equatorial Current (SEC) driven changes at DSDP Site 237, Central Indian Ocean, during the Plio-Pleistocene: Evidence from Benthic Foraminifera and Stable Isotopes

This study attempts to analyse paleoceanographic changes in the Central Indian Ocean (Deep Sea Drilling Project Site 237), linked to monsoon variability as well as deep-sea circulation during the Plio-Pleistocene. We used factor and cluster analyses of census data of the 34 most dominant species of benthic foraminifera that enabled us to identify five biofacies: Astrononion umbilicatulum–Uvigerina proboscidea (Au–Up), Pullenia bulloides–Bulimina striata (Pb–Bs), Globocassidulina tumida–Nuttallides umbonifera (Gt–Nu), Gyroidinoides nitidula–Cibicides wuellerstorfi (Gn–Cw) and Cassidulina carinata–Cassidulina laevigata (Cc–Cl) biofacies. Knowledge of the environmental preferences of modern deep-sea benthic foraminifera helped to interpret the results of factor and cluster analyses in combination with oxygen and carbon isotope values. The biofacies indicative of high surface productivity, resulting from a stronger South Equatorial Current (Au–Up and Pb–Bs biofacies), dominate the early Pliocene interval (5.6–4.5 Ma) of global warmth. An intense Indo-Pacific ‘biogenic bloom’ and strong Oxygen Minimum Zone extended to intermediate depths (1000–2000 m) over large parts of the Indian Ocean in the early Pliocene. Since 4.5 Ma, the food supply in the Central Indian Ocean dropped and fluctuated while deep waters were corrosive (biofacies Gt–Nu, Gn–Cw). The Pleistocene interval is characterized by an intermediate flux of organic matter (Cc–Cl biofacies).     

Aeolian sediment transport and deposition in a modern high‐latitude glacial marine environment

Aeolian sand and dust in polar regions are transported offshore over sea ice and released to the ocean during summer melt. This process has long been considered an important contributor to polar sea floor sedimentation and as a source of bioavailable iron that triggers vast phytoplankton blooms. Reported here are aeolian sediment dispersal patterns and accumulation rates varying between 0·2 g m^?2 yr^?1 and 55 g m^?2 yr^?1 over 3000 km² of sea ice in McMurdo Sound, south‐west Ross Sea, adjacent to the largest ice free area in Antarctica. Sediment distribution and the abundance of southern McMurdo Volcanic Group‐derived glass, show that most sediment originates from the McMurdo Ice Shelf and nearby coastal outcrops. Almost no sediment is derived from the extensive ice free areas of the McMurdo Dry Valleys due to winnowed surficial layers shielding sand‐sized and silt‐sized material from wind erosion and because of the imposing topographic barrier of the north‐south aligned piedmont glaciers. Southerly winds of intermediate strength (ca 20 m sec^?1) are primarily responsible for transporting sediment northwards and offshore. The results presented here indicate that sand‐sized sediment does not travel more than ca 5 km offshore, but very‐fine sand and silt grains can travel >100 km from source. For sites >10 km from the coast, the mass accumulation rate is relatively uniform (1·14 ± 0·57 g m^?2 yr^?1), three orders of magnitude above estimated global atmospheric dust values for the region. This uniformity represents a sea floor sedimentation rate of only 0·2 cm kyr^?1, well below the rates of >9 cm kyr^?1 reported for biogenic‐dominated sedimentation measured over much of the Ross Sea. These results show that, even for this region of high‐windblown sediment flux, aeolian processes are only a minor contributor to sea floor sedimentation, excepting areas proximal to coastal sources.     

A Simulated Test of Algal Influence of Formation and Deposition of Phosphates

This paper deals with a simulated test of biogenic mineralization made with a blue-green alga species,Spirulina platensix. The data in the experiment were recorded by a computerized surveying system. The influ-ence of algae on the accumulation of phosphorus by changing their microenvironment to promote the forma-tion and deposition of phosphate was studied. The results show that the pH value of cultural liquor rose up to 10 and the redox potential (Eh) may dropby 100-200 mV during the algal logarithmic growth stage, and the cultrual liquor was changed into a mediumwith a weakly reducing condition. At the end of the logarithmic growth stage white deposits of Na_2Ca(CO_3)_2·5H_2O and Ca_2Mg (PO_4)_2·2H_2O were formed on the floor of cultural containers. The test presented a wduableevidence for the theory of biogenic mineralization.     

Influence of waves and horseshoe crab spawning on beach morphology and sediment grain-size characteristics on a sandy estuarine beach

The effects of wave action and horseshoe crab spawning on the topography and grain-size characteristics on the foreshore of an estuarine sand beach in Delaware Bay, New Jersey, USA were evaluated using data collected over six consecutive high tides. Data were gathered inside and outside a 25 m long exclosure constructed to create a control area free of disturbance by crabs. The density of crabs in the swash zone outside the exclosure was 8·1 organisms m⁻². The maximum depth of sediment activation on the upper foreshore where spawning occurred was 0·103 m during periods characterized by low significant wave heights: < 0·08 m. This depth is greater than the depth of activation by waves alone during moderate significant wave heights of 0·16–0·18 m but less than the maximum depth (0·127 m) recorded when spawning occurred during periods of moderate wave heights. Spawning, combined with moderate wave heights, creates a concave upper foreshore that is similar to the type of profile change that occurs during storms, thus lowering the wave-energy threshold for morphological response. Spawning during low wave heights increases the mean grain size and sorting of surface sediments caused by the addition of gravel to the swash. Sedimentological differences are most pronounced on the upper foreshore, and data from this location may be most useful when using grain-size characteristics to interpret the effect of spawning in the sedimentary record. Depths of sediment reworking by horseshoe crabs can be greater than those by subsequent storm waves, so evidence of spawning can be preserved on non-eroding beaches. Greater depth of activation by horseshoe crab spawning than by waves alone, even during moderate-energy conditions, reveals the importance of crab burrowing in releasing eggs to the water column and making them available for shore birds.     

Production and pelagic dissolution of biogenic silica in the Southern Ocean

Vertical distributions of particulate silica, and of production and dissolution rates of biogenic silica, were determined on two N-S transects across the Pacific sector of the Antarctic Circumpolar Current during the austral spring of 1978. Particulate silica profiles showed elevated levels in surface water and near the bottom, with low (35–110 nmol Si · 1^?1) and vertically uniform values through the intervening water column. Both the particulate silica content of the upper 200 m and the production rate of biogenic silica in the photic zone increased from north to south, reaching their highest values near the edge of the receding pack ice. A significant, but variable, fraction (18–58%) of the biogenic silica produced in the surface layer was redissolving in the upper 90–98 m. Net production of biogenic silica in the surface layer (production minus dissolution) was proceeding at a mean rate of ca. 2 mmol Si · m^?2 · day^?1. This is ca. 4 times greater than the most recent estimate of the mean accumulation rate of siliceous sediments beneath the ACC. We estimate, based on mass balance, that the mean dissolution rate of biogenic silica in subsurface water column in the Southern Ocean is 1.2–2.9 mmol Si · m^?2 · day^?1.     

Characteristics of particle size for creeping and saltating sand grains in aeolian transport

Creep and saltation are the primary modes of surface transport involved in the fluid‐like movement of aeolian sands. Although numerous studies have focused on saltation, few studies have focused on creep, primarily because of the experimental difficulty and the limited amount of theoretical information available on this process. Grain size and its distribution characteristics are key controls on the modes of sand movement and their transport masses. Based on a series of wind tunnel experiments, this paper presents new data regarding the saltation flux, obtained using a flat sampler, and on the creeping mass, obtained using a specifically designed bed trap, associated with four friction velocities (0·41, 0·47, 0·55 and 0·61 m sec^?1). These data yielded information regarding creeping and saltating sand grains and their particle size characteristics at various heights, which led to the following conclusions: (i) the creeping masses increased as a power function (q = ?1·02 + 14·19u_*³) of friction wind velocities, with a correlation (R²) of 0·95; (ii) the flux of aeolian sand flow decreases exponentially with increasing height (q = a exp(–z/b)) and increases as a power function (q = ?26·30 + 428·40 u_*³) of the friction wind velocity; (iii) the particle size of creeping sand grains is ca 1·15 times of the mean diameter of salting sand grains at a height of 0 to 2 cm, which is 1·14 times of the mean diameter of sand grains in a bed; and (iv) the mean diameter of saltating sand grains decreases rapidly with increasing height whereas, while at a given height, the mean diameter of saltating sand grains is positively correlated with the friction wind velocity. Although these results require additional experimental validation, they provide new information for modelling of aeolian sand transport processes.     

Patterns of sediment composition of Jamaican fringing reef facies

Recent carbonate sediments from Jamaican north coast fringing reefs were collected along three parallel traverses in the vicinity of Discovery Bay. Each traverse extended from near shore across the back reef, reef crest, and fore reef to a depth of 75 m. Relative abundances of the biotic constituents vary between sites, reflecting general patterns of reef community composition. The sediment is dominated by highly comminuted coral fragments (27·1% to 63·1%), plates of the calcareous green alga Halimeda (0·4% to 38·7%), coralline algae (4·7% to 16·2%) and the encrusting foraminiferan Homotrema rubrum (0·7% to 9·5%), with lesser amounts of other taxonomic groups (non-encrusting foraminifera 1·3–5·5%; molluscs 1·4–7·0%; echinoderms 0·9–5·0%). Coral fragments, coralline algae and particles of Homotrema rubrum dominate the sediments of the shallow portions of the fore reef (5–15 m), whereas plates of Halimeda are most abundant in sediments from the back reef and deeper portions of the fore reef ( 24 m). Q-mode cluster analysis, using sediment constituent data, resulted in the delineation of four reef biofacies over the depth range of this study (1–75 m).     

Response of reef coral communities to sea-level rise: a Holocene model from Mauritius (Western Indian Ocean)

The fringing reef at Pointe-au-Sable (Mauritius, Indian Ocean) was used to examine the effects of Holocene sea-level rise on coral growth. This reef is about 1000 m wide and comprises a forereef slope (30 m maximum depth), a narrow reef crest and a very shallow backreef (1·5 m maximum depth). Four major coral communities were recognized, which developed within relatively narrow depth ranges: a Pachyseris/Oulophyllia community (deeper than 20 m), an Acropora‘tabulate’Faviid community (20–6 m); a robust branching Acropora community (less than 6 m) and a Pavona community (less than 10m). Three high-recovery cores show the Holocene reef sequence is a maximum of 19·3 m thick and comprises four coral biofacies which are similar to counterparts identified in modern communities: robust branching, tabular-branching, robust branching-domal and foliaceous coral facies. A minimum sea-level curve for the past 7500 years was constructed. Using distribution patterns of coral biofacies and radiocarbon dates from corals, reconstruction of reef growth history indicates that both offshore and onshore reef zones were developing coevally, aggrading at rates of 4·3 mm year^?1 from 6900 years B.P. The reef caught up with sea-level only after sea-level stabilized. Changes in coral community and reef growth rates were driven principally by increasing water agitation due to the decrease in accommodation space. Based on the composition of the successive coral assemblages, the reef appears to have grown through successive equilibrium stages.     

Multivariate analysis of biogenic constituents in recent sediments off Ras Burka, Gulf of Elat, Red Sea

The shallow shelf area to a water depth of 40 m off Ras Burka, Gulf of Elat, comprises several depositional zones. In order of increasing water depth these include: sand dune (on shore); swash; dead reef platform; sand channel; live coral reef; Cymodoceaslope; reef knolls; and Halophilalawn. The abundance of 64 biogenic constituents, comprising 48 genera of Foraminifera and a variety of other taxa, was recorded in 16 samples representing the sediments presently forming in the various environments. Nodal ordination and association analysis were applied to classify the samples and to examine whether the present day zonation of sedimentary environments can be objectively recognized on the basis of the assemblages of biogenic constituents. The analyses classified the samples consistently into three classes, identified as the shallow near-shore, the upper slope, and the lower slope zones. Association analysis, utilizing only discrete binary presence or absence scores, yielded better results than nodal ordination analysis utilizing continuous metric modal data. In the study area, biogenic grains other than Foraminifera do not contribute to the environmental discrimination. The results suggest that crude presence scores, as contrasted with refined metric data, are informative enough for differentiating sedimentary environments.     

Sediment dispersal and quantitative stratigraphic architecture across an ancient shelf

Two large (200 to 300 km), near‐continuous outcrop transects and extensive well‐log data (ca 2800 wells) allow analysis of sedimentological characteristics and stratigraphic architecture across a large area (ca 60 000 km²) of the latest Santonian to middle Campanian shelf along the western margin of the Western Interior Seaway in eastern Utah and western Colorado, USA. Genetically linked depositional systems are mapped at high chronostratigraphic resolution (ca 0·1 to 0·5 Ma) within their sequence stratigraphic context. In the lower part of the studied interval, sediment was dispersed via wave‐dominated deltaic systems with a ‘compound clinoform’ geomorphology in which an inner, wave‐dominated shoreface clinoform was separated by a muddy subaqueous topset from an outer clinoform containing sand‐poor, gravity‐flow deposits. These strata are characterized by relatively steep, net‐regressive shoreline trajectories (>0·1°) with concave‐landward geometries, narrow nearshore belts of storm‐reworked sandstones (2 to 22 km), wide offshore mudstone belts (>250 km) and relatively high sediment accumulation rates (ca 0·27 mm year^?1). The middle and upper parts of the studied interval also contain wave‐dominated shorefaces, but coeval offshore mudstones enclose abundant ‘isolated’ tide‐influenced sandstones that were transported sub‐parallel to the regional palaeoshoreline by basinal hydrodynamic (tidal?) circulation. These strata are characterized by relatively shallow, net‐regressive shoreline trajectories (<0·1°) with straight to concave‐seaward geometries, wide nearshore belts of storm‐reworked sandstones (19 to 70 km), offshore mudstone belts of variable width (130 to >190 km) and relatively low sediment accumulation rates (ca ≤0·11 mm year^?1). The change in shelfal sediment dispersal and stratigraphic architecture, from: (i) ‘compound clinoform’ deltas characterized by across‐shelf sediment transport; to (ii) wave‐dominated shorelines with ‘isolated’ tide‐influenced sandbodies characterized by along‐shelf sediment transport, is interpreted as reflecting increased interaction with the hydrodynamic regime in the seaway as successive shelfal depositional systems advanced out of a sheltered embayment (‘Utah Bight’). This advance was driven by a decreasing tectonic subsidence rate, which also suppressed autogenic controls on stratigraphic architecture.     

The Growth of Estuarine Resources (Zostera marina, Mercenaria mercenaria, Crassostrea virginica, Argopecten irradians, Cyprinodon variegatus) in Response to Nutrient Loading and Enhanced Suspension Feeding by Adult Shellfish

While many coastal ecosystems previously supported high densities of seagrass and abundant bivalves, the impacts of overfishing, eutrophication, harmful algal blooms, and habitat loss have collectively contributed to the decline of these important resources. Despite improvements in wastewater treatment in some watersheds and subsequent reduced nutrient loading to neighboring estuaries, seagrass and bivalve populations in these locations have generally not recovered. We performed three mesocosm experiments to simultaneously examine the contrasting effects of nutrient loading and historic suspension-feeding bivalve densities on the growth of eelgrass (Zostera marina), juvenile bivalves (northern quahogs, Mercenaria mercenaria; eastern oysters, Crassostrea virginica; and bay scallops, Argopecten irradians), and juvenile planktivorous fish (sheepshead minnow, Cyprinodon variegatus). High nutrient loading rates led to significantly higher phytoplankton (chlorophyll a) levels in all experiments, significantly increased growth of juvenile bivalves relative to controls with lower nutrient loading rates in two experiments, and significantly reduced the growth of eelgrass in one experiment. The filtration provided by adult suspension feeders (M. mercenaria and C. virginica) significantly decreased phytoplankton levels in all experiments, significantly increased light penetration and the growth of eelgrass in one experiment, and significantly decreased the growth of juvenile bivalves and fish in two experiments, all relative to controls with no filtration from adult suspension feeders. These results demonstrate that an appropriate level of nutrient loading can have a positive effect on some estuarine resources and that bivalve filtration can mediate the effects of nutrient loading to the benefit or detriment of different estuarine resources. Future ecosystem-based approaches will need to simultaneously account for anthropogenic nutrient loading and bivalve restoration to successfully manage estuarine resources.