Crustal and uppermost mantle structure in southern Africa revealed from ambient noise and teleseismic tomography

Rayleigh wave phase velocity maps in southern Africa are obtained at periods from 6 to 40 s using seismic ambient noise tomography applied to data from the Southern Africa Seismic Experiment (SASE) deployed between 1997 and 1999. These phase velocity maps are combined with those from 45 to 143 s period which were determined previously using a two-plane-wave method by Li & Burke. In the period range of overlap (25–40 s), the ambient noise and two-plane-wave methods yield similar phase velocity maps. Dispersion curves from 6 to 143 s period were used to estimate the 3-D shear wave structure of the crust and uppermost mantle on an 1°× 1° grid beneath southern Africa to a depth of about 100 km. Average shear wave velocity in the crust is found to vary from 3.6 km s^–1 at 0–10 km depths to 3.86 km s^–1 from 20 to 40 km, and velocity anomalies in these layers correlate with known tectonic features. Shear wave velocity in the lower crust is on average low in the Kaapvaal and Zimbabwe cratons and higher in the surrounding Proterozoic terranes, such as the Limpopo and the Namaqua-Natal belts, which suggests that the lower crust underlying the Archean cratons is probably less mafic than beneath the Proterozoic terranes. Crustal thickness estimates agree well with a previous receiver function study of Nair et al. . Archean crust is relatively thin and light and underlain by a fast uppermost mantle, whereas the Proterozoic crust is thick and dense with a slower underlying mantle. These observations are consistent with the southern African Archean cratons having been formed by the accretion of island arcs with the convective removal of the dense lower crust, if the foundering process became less vigorous in arc environments during the Proterozoic.     

东南极格罗夫山：普里兹造山带中一个典型的泛非期变质地体

提要：距我国中山站以南约400 km的格罗夫山是普里兹造山带向南极内陆的延伸部分,其基底地体由约在920?910 Ma期间侵入的镁铁质－长英质火成岩和少量中元古代的沉积岩构成,这些岩石仅在泛非期（约570?500 Ma）经历了单相变质－构造旋回,因此是一个典型的泛非期变质地体。泛非期高峰变质作用并不象前人所认为的那样仅为中低压麻粒岩相,而是高达770?840?C、1.18?1.40 GPa,并在随后经历了近等温减压（约0.6 GPa）的P-T演化过程。大规模的A型紫苏花岗岩和花岗岩在同造山－后造山阶段侵位,并造成了麻粒岩地体近等压降温的P-T轨迹。这些花岗质岩石是由长期富集地幔的底侵物质（碱性玄武质岩石）经部分溶融而形成的。结合相邻地质体的研究资料,我们认为普里兹造山带可能发育在太古宙－格林维尔期基底地体之上,这些基底地体可能与新元古代（？）盖层卷入到了统一的泛非期造山作用过程。在泛非期造山作用过程中,地壳曾被增厚约达40?50 km,而后又经历了厚约20 km的地壳伸展垮塌和剥蚀。所以,普里兹造山带应代表东冈瓦纳陆块内部由板块缝合作用所形成的一条泛非期碰撞造山带。     

Brine expulsion, fluid transport and metallization spanning 2.0 Gyr in basins of southern and central Africa

Mineral provinces in southern and central Africa are strongly controlled by major structural trends, the alignment of sedimentary basins and metamorphically induced thermal regimes deep in the crust. Ore deposits are preferentially located on cooler margins of orogenic belts and are ultimately end-products of fluid expulsion out of the deeper parts of orogenic axes. Metamorphic and structural vectors within orogenic belts adjacent to major cratons show a trend of high-grade thermal overprinting in the cores of axes and lower metamorphic regimes acting on the distal margins of orogens (e.g. foreland basins). This apparent pattern is considered to have importance in the expulsion of at least three generations of mineralizing fluids beginning with exhalative migration during diagenesis and culminating much later in thrust-controlled expulsion onto adjacent craton margins. Fluids within the hydrosphere that accumulate initially through topographic gradients in the sediments mixed with components of the mantle (CO₂). After storage within the crust, migration, enforced by metamorphic processes, transferred fluids out of, and away from, high thermal regimes in the axes of belts, leading to their present preservation around the margins of the major cratonic nuclei.     

COCORP deep seismic reflection traverses of the U.S. Cordillera

Summary. COCORP seismic reflection traverses of the U.S. Cordillera at 40°N and 48.5°N latitude reveal some fundamental similarities as well as significant differences in reflection patterns. On both traverses, autochthonous crust beneath thin-skinned thrust belts of the eastern part of the Cordillera is unreflective; immediately to the west the Cordilleran interior is very reflective above a flat, prominent reflection Moho. Mesozoic accreted terranes in the western part of the orogen are underlain on both traverses by very complex reflection patterns, in constrast to more easily deciphered patterns beneath areas of Cenozoic accretion. The prominent reflection Moho beneath the orogenic interior on both transects probably evolved through a combination of magmatic and deformational processes during Cenozoic extension. The main differences between the two traverses lie in the reflection patterns of the middle and lower crust in the Cordilleran interior; these differences are probably related to the way Cenozoic extension was accommodated at depth. Laminated middle and lower crust above the reflection Moho in the western Basin and Range (40°N) may be related to magmatism, ductile pure shear and large-scale transposition during Cenozoic extension. By contrast, beneath the eastern Basin and Range (40°N), and the orogenic interior in the NW United States (48.5°N), Cenozoic extension was probably accommodated along dipping deformation zones throughout the crust.     

The “Three-Component” Digital Prospecting Method: A New Approach for Mineral Resource Quantitative Prediction and Assessment

Stimulated by the exceeding progress of information technology, the development of mineral exploration has entered a new period of digitization and quantification. The “three components” approach of mineral prediction is suggested as a new approach to the “digital mineral prospecting,” which is based on the geoanomaly analysis, directed by the research on the diversity of mineralization and on the spectrum of mineral deposits. Close combination of these three aspects of quantitative study makes a new starting point to the digital prospecting. In this paper, the basic theories of the “three components” approach of mineral prediction are discussed. In addition, based on the new achievements in the studies on the prediction and assessment of solid minerals and gas–oil resources, we have centered our discussion on the thought of analysis of geoanomaly evolution and on the “5P” method for approaching the target area in the “three components” approach of mineral prediction.     

Using Mesoproterozoic sedimentary geochemistry to reconstruct basin tectonic geography and link organic carbon productivity to nutrient flux from a Northern Australian large igneous Province

The Beetaloo Sub-basin, northern Australia, is considered the main depocentre of the 1,000-km scale Mesoproterozoic Wilton package of the greater McArthur Basin – the host to one of the oldest hydrocarbon global resources. The ca. 1.40–1.31 Ga upper Roper Group and the latest Mesoproterozoic to early Neoproterozoic unnamed group of the Beetaloo Sub-basin, together, record ca. 500 million years of depositional history within the North Australia Craton. Whole-rock shale Sm–Nd and Pb isotope data from these sediments reveal sedimentary provenance and their evolution from ca. 1.35 to 0.85 Ga. Furthermore, these data, together with shale major/trace elements data from this study and pyrolysis data from previous publications, are used to develop a dynamic tectonic geography model that links the organic carbon production and burial to an enhanced weathering of nutrients from a large igneous province. The ca. 1.35–1.31 Ga Kyalla Formation of the upper Roper Group is composed of isotopically evolved sedimentary detritus that passes up, into more isotopically juvenile Pb values towards the top of the formation. The increase in juvenile compositions coincides with elevated total organic carbon (TOC) contents of these sediments. The coherently enriched juvenile compositions and TOC the upper portions of the Kyalla Formation are interpreted to reflect an increase in nutrient supply associated with the weathering of basaltic sources (e.g. phosphorous). Possible, relatively juvenile, basaltic sources include the Wankanki Supersuite in the western Musgraves and the Derim Derim–Galiwinku large igneous province (LIP). The transition into juvenile, basaltic sources directly before a supersequence-bounding unconformity is here interpreted to reflect uplift and erosion of the Derim Derim–Galiwinku LIP, rather than an influx of southern Musgrave sources. A new baddeleyite crystallisation age of 1,312.9 ± 0.7 Ma provides both a tight constraint on the age of this LIP, along with its associated magmatic uplift, as well as providing a minimum age constraint for Roper Group deposition. The unconformably overlying lower and upper Jamison sandstones are at least 300 million years younger than the Kyalla Formation and were sourced from the Musgrave Province. An up-section increase in isotopically juvenile compositions seen in these rocks is interpreted to document the progressive exhumation of the western Musgrave Province. The overlying Hayfield mudstone received detritus from both the Musgrave and Arunta regions, and its isotopic geochemistry reveals affinities with other early Neoproterozoic basins (e.g. Amadeus, Victoria and Officer basins), indicating the potential for inter-basin correlations.     

Crustal structure beneath exposed accreted terranes of Southern Alaska

Summary. The crustal structure beneath the exposed terranes of southern Alaska has been explored using coincident seismic refraction and reflection profiling. A wide-angle reflector at 8–9 km depth, at the base of an inferred low-velocity zone, underlies the Peninsular and Chugach terranes, appears to truncate their boundary, and may represent a horizontal decollement beneath the terranes. The crust beneath the Chugach terrane is characterized by a series of north-dipping paired layers having low and high velocities that may represent subducted slices of oceanic crust and mantle. This layered series may continue northward under the Peninsular terrane. Earthquake locations in the Wrangell Benioff zone indicate that at least the upper two low-high velocity layer pairs are tectonically inactive and that they appear to have been accreted to the base of the continental crust. The refraction data suggest that the Contact fault between two similar terranes, the Chugach and Prince William terranes, is a deeply penetrating feature that separates lower crust (deeper than 10 km) with paired dipping reflectors, from crust without such reflectors.     

Operations and main results of the ECORS project in France

Summary. The ECORS project was launched in 1983 with the aim of studying fundamental mechanisms of geodynamics in France. The ECORS deep seismic profiles have concentrated on a few structures of major significance: outer zone of the Variscan orogen in northern France, the basin formed during the Bay of Biscay's opening and transects of recent orogenic ranges (Pyrenees and Alps). The seismic profiles have been carried out with all the available modern techniques of industry and completed wherever possible by additional geophysical surveys (magnetism, gravity, MT, wide-angle and refraction seismics) and geological surveys. The first results already shed new light on major geodynamic phenomena such as variations in the frontal Variscan detachment, lower crust formation, crustal behaviour during orogenesis and variations in the formation of cratonic basins.     

Supersequences, superbasins, supercontinents – evidence from the Neoproterozoic–Early Palaeozoic basins of central Australia

Neoproterozoic sedimentary basins cover a large area of central Australia. They rest upon rigid continental crust that varies from c. 40–50 km in thickness. Whilst the crust was in part formed during the Archaean and early Palaeoproterozoic, its final assembly occurred at approximately 1.1 Ga as the Neoproterozoic supercontinent, Rodinia, came into being. The assembly process left an indelible imprint on the region producing a strong crustal fabric in the form of a series of north dipping thrusts that pervade much of the thick craton and extend almost to the Moho. Following a period of stability (1.1–0.8 Ga), a large area of central Australia, in excess of 2.5 × 10⁶ km², began to subside in synchroneity. This major event was due to mantle instability resulting from the insulating effect of Rodinia. Initially, beginning c. 900 Ma, a rising superplume uplifted much of central Australia leading to peneplanation of the uplifted region and the generation of large volumes of sand‐sized clastic materials. Ultimately, the decline of the superplume led to thermal recovery and the development of a sag basin (beginning at c. 800 Ma), which in turn resulted in the redistribution of the clastic sediments and the development of a vast sand sheet at the base of the Neoproterozoic succession. The superbasin generated by the thermal recovery was short lived (c. 20 M.y.) but, in conjunction with the crustal fabric developed during supercontinent assembly, it set the stage for further long‐term basin development that extended for half a billion years well into the Late Palaeozoic. Following the sag phase at least five major tectonic episodes influenced the central Australian region. Compressional tectonics reactivated earlier thrust faults that had remained dormant within the crust, disrupting the superbasin, causing uplift of basement blocks and breaking the superbasin into the four basins now identified within the central Australian Neoproterozoic succession (Officer, Amadeus, Ngalia and Georgina Basin). These subsequent tectonic events produced the distinctive foreland architecture associated with the basins and were perhaps the trigger for the Neoproterozoic ice ages. The reactivated basins became asymmetric with major thrust faults along one margin paralleled by deep narrow troughs that formed the main depocentres for the remaining life of the basins. The final major tectonic event to influence the central Australian basins, the Alice Springs Orogeny, effectively terminated sedimentation in the region in the Late Palaeozoic (c. 290 Ma). Of the six tectonic episodes recorded in the basinal succession only one provides evidence of extension, suggesting the breakup of east Gondwana at the end of the Rodinian supercontinent cycle may have occurred at close to the time of the Precambrian–Cambrian boundary. The central Australian basins are thus the products of events surrounding the assembly and dispersal of Rodinia.     

Seismic records of late Pleistocene aridity in Lake Tanganyika,tropical East Africa

New intermediate-resolution, normal-incidence seismic reflection profiles from Lake Tanganyika’s central basin capture dramatic evidence of base-level change during two intervals of the late Pleistocene. Four seismically-defined stratigraphic sequences (A–D) tied to radiocarbon-dated sediment cores provide a chronology for fluctuating environmental conditions along the Kalya Platform. Stacked, oblique clinoforms in Sequence C are interpreted as prograding siliciclastic deltas deposited during a major regression that shifted the paleo-lake shore ∼21 km towards the west prior to ∼106 ka. The topset-to-foreset transitions in these deltas suggest lake level was reduced by ∼435 m during the period of deposition. Mounded reflections in the overlying sequence are interpreted as the backstepping remnants of the delta system, deposited during the termination of the lowstand and the onset of transgressive conditions in the basin. The youngest depositional sequence reflects the onset of profundal sedimentation during the lake level highstand. High amplitude reflections and deeply incised channels suggest a short-lived desiccation event that reduced lake level by ∼260 m, interpreted as a product of Last Glacial Maximum (32–14 ka) aridity. Paleobathymetric maps constructed for the two interpreted regressions reveal that despite the positive lake-floor topography created by the Kavala Island Ridge Accommodation Zone, Lake Tanganyika remained a large, mostly connected water body throughout the late Pleistocene. The results of this analysis further imply that Lake Tanganyika is the most drought resistant water body in the East African tropics, and may have acted as a refuge for local and migrating fauna during periods of prolonged aridity.     

Late- to post-orogenic basins of the Pan-African – Brasiliano collision orogen in southern Africa and southern Brazil

Late- to post-orogenic basins formed on both sides of the Pan-African – Brasiliano orogen when the Congo and Kalahari Cratons collided with the Rio de la Plata Craton during the formation of western Gondwana. Trace fossil evidence and radiometric age dating indicate that deposits on both sides are coeval and span the Cambrian–Precambrian boundary. A peripheral foreland basin, the Nama Basin, developed on the subducting southern African plate. Lower, craton-derived fluviomarine clastics are overlain by marine platform carbonates and deltaic flysch derived in part from the rising subduction complex along the northern (Damara Belt) and western (Gariep Belt) orogenic margins. Rare, thin volcanic ash layers (tuffs and cherts) are present. Upper sediments consist of unconformable red molasse related to collisional orogenesis. Orogenic loading from the north and west led to crustal flexure and the formation of a remnant ocean that drained to the south and closed progressively from north to south. During final collision SE-, E- and NE-verging nappes overrode the active basin margins. Although younger than most of the post-orogenic magmatism, its setting on the cratonic edge of the subducting plate precluded marked volcanism or granitic intrusion, the only exception being the youngest intrusions of the Kuboos-Bremen Suite dated at 521±6 Ma to 491±8 Ma. Two foreland-type basins, perhaps faulted remnants of a much larger NE–SW elongated retroarc foreland basin, are found west of the Dom Feliciano Belt on the edge of the Rio de la Plata Craton in southern Brazil. In the southern Camaqua Basin, basal fluvial deposits are followed by cyclical marine and coarsening-up deltaic deposits with a notable volcanic and volcaniclastic component. This lower deformed succession, comprising mainly red beds, contain stratabound Cu and Pb–Zn deposits and is overlain unconformably by a fluviodeltaic to aeolian succession of sandstones and conglomerates (with minor andesitic volcanics), derived primarily from an eastern orogenic source and showing southerly longitudinal transport. In the northern Itajaí Basin, sediments range from basal fluvial and platform sediments to fining-up submarine fan and turbidite deposits with intercalated acid tuffs. The Brazilian basins had faulted margins off which alluvial fans were shed. They also overlie parts of the Ribeira Belt. Thrust deformation along the orogenic margin bordering the Dom Feliciano Belt was directed westward in the Camaqua and Itajaí basins, but reactivated strike-slip and normal faults are also present. Late- to post-orogenic granitoids and volcanics of the Dom Feliciano Belt, ranging in age from 568±6 Ma to 529±4 Ma, occur in the foreland basins and are geochemically related to some of the synsedimentary volcanics.     

GIS-based Mineral Prospectivity Mapping of Seafloor Massive Sulfide on Ultraslow-spreading Ridges: A Case Study of Southwest Indian Ridge 48.7°–50.5° E

With the depletion of mineral resources on land, seafloor massive sulfide deposits have the potential to become as important for exploration, development and mining as those on land. However, it is difficult to investigate the ocean environment where seafloor massive sulfide deposits are located. Thus, improving prospecting efficiency by reducing the exploration search space through mineral prospectivity mapping (MPM) is desirable. MPM has been used in the exploration for seafloor deposits on regional scales, e.g., the Mid-Atlantic Ridge and Arctic Ridge. However, studies of MPM on ultraslow-spreading ridges on segment scales to aid exploration for seafloor massive sulfide have not been carried out to date. Here, data of water depth, geology and hydrothermal plume anomalies were analyzed and the weights-of-evidence method was used to study the metallogenic regularity and to predict the potential area for seafloor massive sulfide exploration in 48.7°–50.5° E segments on the ultraslow spreading Southwest Indian Ridge. Based on spatial analysis, 11 predictive maps were selected to establish a mineral potential model. Weight values indicate that the location of seafloor massive sulfide deposits is correlated mainly with mode-E faults and oceanic crust thickness in the study area, which correspond with documented ore-controlling factors on other studied ultraslow-spreading ridges. In addition, the detachment fault and ridge axis, which reflect the deep hydrothermal circulation channel and magmatic activities, also play an important role. Based on the posterior probability values, 3 level A, 2 level B and 2 level C areas were identified as targets for further study. The MPM results were helpful for narrowing the search space and have implications for investigating and evaluating seafloor massive sulfide resources in the study area and on other ultraslow-spreading ridges.

     

东南极新元古代晚期–早古生代(泛非期)花岗岩类的对比研究

东南极内部发育毛德和普里兹两条新元古代晚期-早古生代(泛非期)造山带,这两条造山带中均发育大量同-后构造花岗岩类。本文系统总结了以往东南极泛非期花岗岩类的岩石学、地球化学和年代学方面的研究成果,对不同地区岩体的岩石类型、岩浆源区及形成的构造环境进行了对比研究。结果表明：除南龙达讷山为I型花岗岩外,大部分花岗岩类表现出与碰撞造山作用相关的A型(或S型)花岗岩的特征。泛非期岩浆作用与区域高级变质作用的时代吻合(600-500 Ma)。两条造山带中泛非期岩浆作用与碰撞后岩石圈减薄、岩浆底侵以及上地壳的伸展垮塌相联系,均具有碰撞造山带的构造演化特点。所以,冈瓦纳超大陆的形成很可能是通过西冈瓦纳、印度－南极陆块和澳大利亚－南极陆块等三个陆块沿着两条造山带(毛德造山带和普里兹造山带)近于同期发生拼合碰撞的结果。     

Sediment routing in the Zagros foreland basin: Drainage reorganization and a shift from axial to transverse sediment dispersal in the Kurdistan region of Iraq

In the northwestern sector of the Zagros foreland basin, axial fluvial systems initially delivered fine-grained sediments from northwestern source regions into a contiguous basin, and later transverse fluvial systems delivered coarse-grained sediments from northeastern sources into a structurally partitioned basin by fold-thrust deformation. Here we integrate sedimentologic, stratigraphic, palaeomagnetic and geochronologic data from the northwestern Zagros foreland basin to define the Neogene history of deposition and sediment routing in response to progressive advance of the Zagros fold-thrust belt. This study constrains the depositional environments, timing of deposition and provenance of nonmarine clastic deposits of the Injana (Upper Fars), Mukdadiya (Lower Bakhtiari) and Bai-Hasan (Upper Bakhtiari) Formations in the Kurdistan region of Iraq. Sediments of the Injana Formation (~12.4–7.75 Ma) were transported axially (orogen-parallel) from northwest to southeast by meandering and low-sinuosity channel belt system. In contrast, during deposition of the Mukdadiya Formation (~7.75–5 Ma), sediments were delivered transversely (orogen-perpendicular) from northeast to southwest by braided and low-sinuosity channel belt system in distributive fluvial megafans. By ~5 Ma, the northwestern Zagros foreland basin became partitioned by growth of the Mountain Front Flexure and considerable gravel was introduced in localized alluvial fans derived from growing topographic highs. Foredeep accumulation rates during deposition of the Injana, Mukdadiya and Bai-Hasan Formations averaged 350, 400 and 600 m/Myr respectively, suggesting accelerated accommodation generation in a rapidly subsiding basin governed by flexural subsidence. Detrital zircon U-Pb age spectra show that in addition to sources of Mesozoic-Cenozoic cover strata, the Injana Formation was derived chiefly from Palaeozoic-Precambrian (including Carboniferous and latest Neoproterozoic) strata in an axial position to the northwest, likely from the Bitlis-Puturge Massif and broader Eastern Anatolia. In contrast, the Mukdadiya and Bai-Hasan Formations yield distinctive Palaeogene U-Pb age peaks, particularly in the southeastern sector of the study region, consistent with transverse delivery from the arc-related terranes of the Walash and Naopurdan volcano-sedimentary groups (Gaveh-Rud domain?) and Urumieh-Dokhtar magmatic arc to the northeast. These temporal and spatial variations in stratigraphic framework, depositional environments, sediment routing and compositional provenance reveal a major drainage reorganization during Neogene shortening in the Zagros fold-thrust belt. Whereas axial fluvial systems initially dominated the foreland basin during early orogenesis in the Kurdistan region of Iraq, transverse fluvial systems were subsequently established and delivered major sediment volumes to the foreland as a consequence of the abrupt deformation advance and associated topographic growth in the Zagros.     

Permian exhumation of the Montagne Noire core complex recorded in the Graissessac‐Lodève Basin,France

The paleogeographic reconstruction of the Variscan Mountains during late Carboniferous‐Permian post‐orogenic extension remains poorly understood, owing to the subsequent erosion and/or burial of most associated sedimentary basins during the Mesozoic. The Graissessac‐Lodève Basin (southern France) preserves a thick and exceptionally complete record of continental sedimentation spanning late Carboniferous through late Permian time. This section records the localized tectonic and paleogeographic evolution of southern France in the context of the low‐latitude Variscan Belt of Western Europe. This study presents new detrital zircon and framework mineralogy data that address the provenance of siliciclastic strata exposed in the basin. The ages and compositions of units that constitute the Montagne Noire metamorphic core complex (west of the basin) dictate the detrital zircon age populations and sandstone compositions in Permian strata, recording rapid exhumation and unroofing of the Montagne Noire dome. Cambrian‐Archean zircons and metamorphic lithic‐rich compositions record derivation from recycled detritus of the earliest Paleozoic sedimentary cover and Neoproterozoic‐early Cambrian metasedimentary Schistes X, which formerly covered the Montagne Noire dome. Ordovician zircons and subarkosic framework compositions indicate erosion of orthogneiss units that formed a large part of the dome. The youngest zircon population (320–285 Ma) reflects derivation from late Carboniferous‐early Permian granite units in the axial zone of the Montagne Noire. This population appears first in the early Permian, persists throughout the Permian section and is accompanied by sandstone compositions dominated by feldspar, polycrystalline quartz and metamorphic lithic fragments. The most recent migmatization, magmatism and deformation occurred ca. 298 ± 2 Ma, at ca. 17 km depth (based on peak metamorphic conditions). Accordingly, these new provenance data, together with zircon fission‐track thermochronology, demonstrate that exhumation of the Montagne Noire core complex was rapid (1–17 mm year⁻¹) and early (300–285 Ma), reflecting deep‐seated uplift in the southern Massif Central during post‐orogenic extension.     

Chemostratigraphic correlation of carbonate successions in the Gariep and Saldania Belts, Namibia and South Africa

ABSTRACT Inter‐ and intrabasinal correlation of Neoproterozoic carbonate successions and associated glaciogenic deposits from the Pan‐African Gariep Belt and the Kango inlier in the Saldania Belt (Namibia and South Africa) is proposed on the basis of new δ¹³C_Carb and ⁸⁷Sr/⁸⁶Sr_I data. Highly positive δ¹³C_Carb values (as much as + 8.65‰) and low ⁸⁷Sr/⁸⁶Sr_I ratios (0.7071–0.7077) were obtained on carbonate successions of the Hilda Subgroup between an older and a younger diamictite in the Port Nolloth Group (Gariep Belt). These results are in agreement with data elsewhere that suggest deposition between the global ～ 750 Ma Sturtian and ～ 580 Ma Marinoan glaciations. Considerably lower, positive δ¹³C_Carb values (up to + 1.01‰) and higher ⁸⁷Sr/⁸⁶Sr_I ratios (0.7082–0.7085) mark the carbonates (Bloeddrif Member, Holgat Formation) on top of the Numees Formation diamictite and support a correlation of this diamictite with the Marinoan glaciation. In the southern extension of the Gariep Belt, correlation of the Widouw Formation limestone (Gifberg Group) with the Bloeddrif Member carbonates is proposed based on similar isotopic characteristics. In the Kango inlier of the Saldania Belt, two carbonate‐bearing members exist in the Matjies River Formation. The lower one of these two (Nooitgedacht Member) compares well with the Hilda Subgroup, whereas the upper one (Kombuis Member) shows strong similarities to the Bloeddrif Member carbonates. This implies that all younger stratigraphic units of the Kango inlier are not correlatives of the Port Nolloth Group, as previously assumed, but syn‐ to post‐orogenic with respect to the 540–580 Ma Pan‐African orogeny.     

Post‐orogenic sediment drape in the Northern Pyrenees explained using a box model

The transition to a post‐orogenic state in mountain ranges has been identified by a change from active subsidence to isostatic rebound of the foreland basin. However, the nature of the interplay between isostatic rebound and sediment supply, and their impact on the topographic evolution of a range and foreland basin during this transition, has not been fully investigated. Here, we use a box model to explore the syn‐ to post‐orogenic evolution of foreland basin/thrust wedge systems. Using a set of parameter values that approximate the northern Pyrenees and the neighbouring Aquitaine foreland basin, we evaluate the controls on sediment drape over the frontal parts of the retro‐wedge following cessation of crustal thickening. Conglomerates preserved at approximately 600‐m elevation, which is ~ 300 m above the present mountain front in the northern Pyrenees are ca. 12 Ma, approximately 10 Myrs younger than the last evidence of crustal thickening in the wedge. Using the model, this post‐orogenic sediment drape is explained by the combination of a sustained, high sediment influx from the range into the basin relative to the efflux out of the basin, combined with cessation of the generation of accommodation space through basin subsidence. Post‐orogenic sediment drape is considered a generic process that is likely to be responsible for elevated low‐gradient surfaces and preserved remnants of continental sedimentation draping the outer margins of the northern Pyrenean thrust wedge.     

Are Fractal Dimensions of the Spatial Distribution of Mineral Deposits Meaningful?

It has been proposed that the spatial distribution of mineral deposits is bifractal. An implication of this property is that the number of deposits in a permissive area is a function of the shape of the area. This is because the fractal density functions of deposits are dependent on the distance from known deposits. A long thin permissive area with most of the deposits in one end, such as the Alaskan porphyry permissive area, has a major portion of the area far from known deposits and consequently a low density of deposits associated with most of the permissive area. On the other hand, a more equi-dimensioned permissive area, such as the Arizona porphyry permissive area, has a more uniform density of deposits. Another implication of the fractal distribution is that the Poisson assumption typically used for estimating deposit numbers is invalid. Based on datasets of mineral deposits classified by type as inputs, the distributions of many different deposit types are found to have characteristically two fractal dimensions over separate non-overlapping spatial scales in the range of 5–1000 km. In particular, one typically observes a local dimension at spatial scales less than 30–60 km, and a regional dimension at larger spatial scales. The deposit type, geologic setting, and sample size influence the fractal dimensions. The consequence of the geologic setting can be diminished by using deposits classified by type. The crossover point between the two fractal domains is proportional to the median size of the deposit type. A plot of the crossover points for porphyry copper deposits from different geologic domains against median deposit sizes defines linear relationships and identifies regions that are significantly underexplored. Plots of the fractal dimension can also be used to define density functions from which the number of undiscovered deposits can be estimated. This density function is only dependent on the distribution of deposits and is independent of the definition of the permissive area. Density functions for porphyry copper deposits appear to be significantly different for regions in the Andes, Mexico, United States, and western Canada. Consequently, depending on which regional density function is used, quite different estimates of numbers of undiscovered deposits can be obtained. These fractal properties suggest that geologic studies based on mapping at scales of 1:24,000 to 1:100,000 may not recognize processes that are important in the formation of mineral deposits at scales larger than the crossover points at 30–60 km.     

Biodiversity and conservation in the Tibetan Plateau

The Tibetan Plateau (Qinghai-Xizang Plateau) is a unique biogeographic region in the world, where various landscapes, altitudinal belts, alpine ecosystems, and endangered and endemic species have been developed. A total of 26 altitudinal belts, 28 spectra of altitudinal belts, 12,000 species of vascular plant, 5,000 species of epiphytes, 210 species of mammals, and 532 species of birds have been recorded. The plateau is also one of the centers of species formation and differentiation in the world To protect the biodiversity of the plateau, about 80 nature reserves have been designated, of which 45 are national or provincial, covering about 22% of the plateau area. Most of the nature reserves are distributed in the southeastern plateau. Recently, the Chinese government has initiated the “Natural Forests Protection Project of China,” mainly in the upper reaches of the Yangtze and Yellow rivers. “No logging” policies have been made and implemented for these areas.     

Burial and exhumation of the western border of the Ukrainian Shield (Podolia): a multi‐disciplinary approach

The Podolia region is located along the western border of the Eastern European Craton, which is also known as Ukrainian Shield. From the Ordovician to the Miocene, this area formed part of an epicontinental basin system. In order to investigate the effects of orogenic cycles occurring along the plate margin, a multi‐disciplinary approach was used in this study. Paleotemperature analysis and low‐temperature thermochronometry were combined with stratigraphic data to obtain a burial model for the Paleozoic succession exposed in the study area. Maximum burial for Silurian and Devonian rocks occurred during the Devonian and Early Carboniferous at depths of 4–5 km, as constrained by vitrinite reflectance and illite content in mixed illite‐smectite layers. Thermochronometric data indicate that exhumation through the 45–120 °C temperature range took place between the Late Triassic and the Early Jurassic, and that no significant burial occurred afterwards (temperatures characterising the stratigraphically lowermost units remaining below ca. 60 °C). These results point to a major exhumation event coeval with the Cimmerian orogenesis, which took place a few hundreds of kilometres away from the study area. On the other hand, no significant effect of the Alpine orogenesis was recorded, although the collisional front was located <100 km from the Podolia region. This work shows how paleothermal and thermochronometric analyses can be successfully integrated with stratigraphic data to reconstruct the burial history, and how the burial history of a basin located on a plate margin can, in some cases, be independent from the distance of the margin from the collisional fronts.