共查询到20条相似文献,搜索用时 31 毫秒
1.
Fragility curves for risk-targeted seismic design maps 总被引:1,自引:0,他引:1
Thomas Ulrich Caterina Negulescu John Douglas 《Bulletin of Earthquake Engineering》2014,12(4):1479-1491
Seismic design using maps based on “risk-targeting” would lead to an annual probability of attaining or exceeding a certain damage state that is uniform over an entire territory. These maps are based on convolving seismic hazard curves from a standard probabilistic analysis with the derivative of fragility curves expressing the chance for a code-designed structure to attain or exceed a certain damage state given a level of input motion, e.g. peak ground acceleration (PGA). There are few published fragility curves for structures respecting the Eurocodes (ECs, principally EC8 for seismic design) that can be used for the development of risk-targeted design maps for Europe. In this article a set of fragility curves for a regular three-storey reinforced-concrete building designed using EC2 and EC8 for medium ductility and increasing levels of design acceleration \((\hbox {a}_\mathrm{g})\) is developed. These curves show that structures designed using EC8 against PGAs up to about 1 m/s \(^{2}\) have similar fragilities to those that respect only EC2 (although this conclusion may not hold for irregular buildings, other geometries or materials). From these curves, the probability of yielding for a structure subjected to a PGA equal to \(\hbox {a}_\mathrm{g}\) varies between 0.14 ( \(\hbox {a}_\mathrm{g}=0.7\) m/s \(^{2})\) and 0.85 ( \(\hbox {a}_\mathrm{g}=3\) m/s \(^{2})\) whereas the probability of collapse for a structure subjected to a PGA equal to \(\hbox {a}_\mathrm{g}\) varies between 1.7 \(\times 10^{-7}\) ( \(\hbox {a}_\mathrm{g}=0.7\) m/s \(^{2})\) and 1.0 \(\times 10^{-5}\) ( \(\hbox {a}_\mathrm{g}=3\) m/s \(^{2})\) . 相似文献
2.
The role of site effects in the comparison between code provisions and the near field strong motion of the Emilia 2012 earthquakes 总被引:1,自引:1,他引:0
Maria Rosaria Gallipoli Leonardo Chiauzzi Tony Alfredo Stabile Marco Mucciarelli Angelo Masi Carmine Lizza Luigi Vignola 《Bulletin of Earthquake Engineering》2014,12(5):2211-2230
A damaging seismic sequence hit a wide area mainly located in the Emilia-Romagna region (Northern Italy) during 2012 with several events of local magnitude \(\hbox {M}_\mathrm{l} \ge 5\) , among which the \(\hbox {M}_\mathrm{l}\) 5.9 May 20 and the \(\hbox {M}_\mathrm{l}\) 5.8 May 29 were the main events. Thanks to the presence of a permanent accelerometric station very close to the epicentre and to the temporary installations performed in the aftermath of the first shock, a large number of strong motion recordings are available, on the basis of which, we compared the recorded signals with the values provided by the current Italian seismic regulations, and we observed several differences with respect to horizontal components when the simplified approach for site conditions (based on Vs30 classes) is used. On the contrary, when using the more accurate approach based on the local seismic response, we generally obtain a much better agreement, at least in the frequency range corresponding to a quarter wavelength comparable with the depth of the available subsoil data. Some unresolved questions still remain, such as the low frequency behaviour ( \(<\) 1 Hz) that could be due either to complex propagation at depth larger than the one presently investigated or to near source effects, and the behaviour of vertical spectra whose recorded/code difference is too large to be explained with the information currently available. 相似文献
3.
Martín Jesús Rodríguez-Peces Julián García-Mayordomo José Jesús Martínez-Díaz 《Bulletin of Earthquake Engineering》2014,12(5):1961-1976
The Lorca Basin has been the object of recent research aimed at studying the phenomena of earthquake-induced landslides and its assessment in the frame of different seismic scenarios. However, it has not been until the 11th May 2011 Lorca earthquakes when it has been possible to conduct a systematic approach to the problem. In this paper we present an inventory of slope instabilities triggered by the Lorca earthquakes which comprises more than 100 cases, mainly rock and soil falls of small size (1–100 \(\hbox {m}^{3}\) ). The distribution of these instabilities is here compared to two different earthquake-triggered landslide hazard maps: one considering the occurrence of the most probable earthquake for a 475-years return period in the Lorca Basin \((\hbox {M}_{\mathrm{w}}=5.0)\) based on both low- and high-resolution digital elevation model (DEM); and a second one matching the occurrence of the \(\hbox {M}_{\mathrm{w}}=5.2\) 2011 Lorca earthquake, which was performed using the higher resolution DEM. The most frequent Newmark displacements related to the slope failures triggered by the 2011 Lorca earthquakes are lower than 2 cm in both the hazard scenarios considered. Additionally, the predicted Newmark displacements were correlated to the inventory of slope instabilities to develop a probability of failure equation. The fit seems to be very good since most of the mapped slope failures are located on the higher probability areas. The probability of slope failure in the Lorca Basin for a seismic event similar to the \(\hbox {M}_{\mathrm{w}}\) 5.2 2011 Lorca earthquake can be considered as very low (0–4 %). 相似文献
4.
It has been observed that post-critically reflected S-waves and multiples from the Moho discontinuity could play a relevant role on the ground motion due to medium to strong size earthquakes away from the source. Although some studies investigated the correlation between the Moho reflections amplitudes and the damage in the far field, little attention was given to the frequency content of these specific phases and their scaling with magnitude. The 2012 Emilia seismic sequence in northern Italy, recorded by velocimetric and accelerometric networks, is here exploited to investigate Moho reflections and multiples (SmSM). A single station method for group velocity-period estimation, based on the multiple filter technique, is applied to strong motion data to detect SmSM. Amplitude and frequency scaling with magnitude is defined for earthquakes from \(\hbox {Mw}=3.9\) to \(\hbox {Mw}=5.9\) . Finally, the ability of SmSM to affect the ground motion for a maximum credible earthquake within the Po plain is investigated by extrapolating observed engineering parameters. Data analysis shows that high amplitude SmSM can be recognized within the Po plain, and at the boundaries between the Po plain and the Alpine chain, at epicentral distances larger than 80 km, in the period range from 0.25 to 3 s and in the group velocity window from about 2.6 to 3.2 km/s. 5 % damped pseudo-spectral accelerations at different periods (0.3, 1.0 and 2.0 s), and Housner intensities, are obtained from data characterized by large amplitude SmSM. A scaling relationship for both pseudo-spectral accelerations and Housner intensities is found for the earthquakes of the 2012 Emilia seismic sequence. \(\hbox {I}_{\mathrm{MCS}}\) from VII to VIII is estimated, as a result of SmSM amplitude enhancement, at about 100 km for a maximum credible earthquake ( \(\hbox {Mw}=6.7\) ) in the Po plain, showing that moderate to high damage cloud be caused by these specific phases. 相似文献
5.
José Morales Juan V. Cantavella Flor de Lis Mancilla Lucía Lozano Daniel Stich Encarnación Herraiz José B. Martín José A. Lopez-Comino José M. Martinez-Solares 《Bulletin of Earthquake Engineering》2014,12(5):1871-1888
The Lorca 2011 seismic series was recorded by an unprecedented set of high quality on scale broadband seismograms and strong motion accelerograms. The waveforms from permanent and temporary broadband seismic networks deployed in the region by different institutions allowed to invert regional moment tensor for the fore, main and largest aftershock of the complete seismic sequence. Using double-difference algorithm we have performed a precise relocation of the seismic series, where body wave travel times from strong ground motion accelerograms were included in the data set. Regional moment tensor inversion for the three main events show similar oblique-reverse faulting regime with a northeast-southwest fault orientation. The scalar seismic moment, moment magnitude and focal depth retrieved from the inversion yield the following values for each event: \(\hbox {Mo}=6.5\times 10^{16}\) Nm (Mw = 5.2) for the mainshock, \(\hbox {Mo}= 9.6 \times 10^{15}\) Nm (Mw = 4.6) for the foreshock and \(\hbox {Mo}=7.3\times 10^{14}\) Nm (Mw = 3.9) for the large aftershock. The centroid depths range between 4 and 6 km. The double-difference relocation of the seismic series shows significant epicentral differences with the preliminary routine location. The epicentral solutions given by this relocation show a seismic sequence distributed following a NE–SW strike, subparallel to the Alhama de Murcia fault and compatible with the faulting parameters inverted from the moment tensor analysis. The hypocenters of the series generate a subvertical trend in depth distribution, being concentrated between 2 and 6 km. The depth distribution of the main events, which range from 4.6 to 5.5 km, is in good relationship with the faulting and depth parameters deduced from the moment tensor inversion technique. The regional moment tensor solutions for the three largest earthquakes, the epicentral distribution and the focal depths show good relationship with the surface geometry and tectonic regime of the Alhama de Murcia fault. The stress drop deduced for the mainshock gives a value ranging between 58 and 85 bars, which does not support the idea of a high stress drop release as a main factor contributing to the high ground acceleration recorded at Lorca. The PGA values observed at Lorca, which contributed to the high damage independently of structural deficiencies, could be generated mainly by shallowness and proximity to the seismic source together with a directivity effect in the seismic radiation. 相似文献
6.
A Crustal Model for the Eastern Alps Region and a New Moho Map in Southeastern Europe 总被引:1,自引:0,他引:1
In the last two decades, south-central Europe and the Eastern Alps have been widely explored by many seismic refraction experiments (e.g., CELEBRATION 2000, ALP 2002, SUDETES 2003). Although quite detailed images are available along linear profiles, a comprehensive, three-dimensional crustal model of the region is still missing. This limitation makes this region a weak spot in continental-wide comprehensive representations of crustal structure. To improve on this situation, we select and collect 37 published active-source seismic lines in this region. After geo-referencing each line, we sample them along vertical profiles—every 50?km or less along the line—and derive P-wave velocities in a stack of homogeneous layers (separated by discontinuities: depth of crystalline basement, top of lower crust, and Moho). We finally merge the information using geostatistical methods, and infer S-wave velocity and density using empirical scaling relations. We present here the resulting crustal model for a region encompassing the Eastern Alps, Dinarides, Pannonian basin, Western Carpathians and Bohemian Massif, covering the region within $45^{\circ}\text{--}51^{\circ}\hbox{N}$ and $11^{\circ} \text{--} 22^{\circ}\hbox{E}$ with a resolution of $0.2^{\circ} \times 0.2^{\circ}.$ We are also able to extend and update the map of Moho depth in a wider region within $35^{\circ}\text{--}51^{\circ}\hbox{N}$ and $12^{\circ}\text{--}45^{\circ}\hbox{E},$ gathering Moho values from the collected seismic lines, other published dataset and using the European plate reference EPcrust as a background. All the digitized profiles and the resulting model are available online. 相似文献
7.
In this paper we describe a stable automatic method to estimate in real time the seismic moment, moment magnitude and corner frequency of events recorded by a network comprising broad-band and accelerometer sensors. The procedure produces reliable results even for small-magnitude events $\hbox {M}_{\mathrm{W}}\approx 3$ . The real-time data arise from both the Transfrontier network at the Alps-Dinarides junction and from the Italian National Accelerometric Network (RAN). The data is pre-processed and the S-wave train identified through the application of an automatic method, which estimates the arrival times based on the hypocenter location, recording site and regional velocity model. The transverse component of motion is used to minimize conversion effects. The source spectrum is obtained by correcting the signals for geometrical spreading and intrinsic attenuation. Source spectra for both velocity and displacement are computed and, following Andrews (1986), the seismic moment and the first estimate of the corner frequency, $f_{0}$ , derived. The procedure is validated using the recordings of some recent moderate earthquakes (Carnia 2002; Bovec 2004; Parma 2008; Aquila 2009; Macerata 2009; Emilia 2012) and the recordings of some minor events in the SE Alps area for which independent seismic moment and moment magnitude estimates are available. The results obtained with a dataset of 843 events recorded by the Transfrontier and RAN networks show that the procedure is reliable and robust for events with $\hbox {M}_{\mathrm{W}}\ge 3$ . The estimates of $f_{0}$ are less reliable. The results show a scatter, principally for small events with $\hbox {M}_{\mathrm{W}}\le 3$ , probably due to site effects and inaccurate locations. 相似文献
8.
The seismic behaviour of caisson foundations supporting typical bridge piers is analysed with 3D finite elements, with due consideration to soil and interface nonlinearities. Single-degree-of freedom oscillators of varying mass and height, simulating heavily and lightly loaded bridge piers, founded on similar caissons are studied. Four different combinations of the static ( $\text{ FS }_\mathrm{V}$ FS V ) and seismic ( $\text{ FS }_\mathrm{E}$ FS E ) factors of safety are examined: (1) a lightly loaded ( $\text{ FS }_\mathrm{V}= 5$ FS V = 5 ) seismically under-designed ( $\text{ FS }_\mathrm{E} < 1$ FS E < 1 ) caisson, (2) a lightly loaded seismically over-designed ( $\text{ FS }_\mathrm{E} >1$ FS E > 1 ) caisson, (3) a heavily loaded ( $\text{ FS }_\mathrm{V} = 2.5$ FS V = 2.5 ) seismically under-designed ( $\text{ FS }_\mathrm{E} < 1$ FS E < 1 ) caisson and (4) a heavily loaded seismically over-designed caisson. The analysis is performed with use of seismic records appropriately modified so that the effective response periods (due to soil-structure-interaction effects) of the studied systems correspond to the same spectral acceleration, thus allowing their inelastic seismic performance to be compared on a fair basis. Key performance measures of the systems are then contrasted, such as: accelerations, displacements, rotations and settlements. It is shown that the performance of the lightly loaded seismically under-designed caisson is advantageous: not only does it reduce significantly the seismic load to the superstructure, but it also produces minimal residual displacements of the foundation. For heavily loaded foundations, however ( $\text{ FS }_{V} = 2.5$ FS V = 2.5 ), the performance of the two systems (over and under designed) is similar. 相似文献
9.
In a companion article Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4, 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) present a new ground-motion prediction equation (GMPE) for estimating 5 %-damped horizontal pseudo-acceleration spectral (PSA) ordinates for shallow active crustal regions in Europe and the Middle East. This study provides a supplementary viscous damping model to modify 5 %-damped horizontal spectral ordinates of Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) for damping ratios ranging from 1 to 50 %. The paper also presents another damping model for scaling 5 %-damped vertical spectral ordinates that can be estimated from the vertical-to-horizontal (V/H) spectral ratio GMPE that is also developed within the context of this study. For consistency in engineering applications, the horizontal and vertical damping models cover the same damping ratios as noted above. The article concludes by introducing period-dependent correlation coefficients to compute horizontal and vertical conditional mean spectra (Baker in J Struct Eng 137:322–331, 2011). The applicability range of the presented models is the same as of the horizontal GMPE proposed by Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b): as for spectral periods $0.01 \hbox { s}\le \,\hbox {T}\le \,4\hbox { s}$ as well as PGA and PGV for V/H model; and in terms of seismological estimator parameters $4\le \hbox {M}_\mathrm{w} \le 8, \hbox { R} \le 200 \hbox { km}, 150\hbox { m/s}\le \hbox { V}_\mathrm{S30}\le $ 1,200 m/s, for reverse, normal and strike-slip faults. The source-to-site distance measures that can be used in the computations are epicentral $(\hbox {R}_\mathrm{epi})$ , hypocentral $(\hbox {R}_\mathrm{hyp})$ and Joyner–Boore $(\hbox {R}_\mathrm{JB})$ distances. The implementation of the proposed GMPEs will facilitate site-specific adjustments of the spectral amplitudes predicted from probabilistic seismic hazard assessment in Europe and the Middle East region. They can also help expressing the site-specific design ground motion in several formats. The consistency of the proposed models together with the Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) GMPE may be advantageous for future modifications in the ground-motion definition in Eurocode 8 (CEN in Eurocode 8, Design of structures for earthquake resistance—part 1: general rules, seismic actions and rules for buildings. European Standard NF EN 1998-1, Brussels, 2004). 相似文献
10.
A. Benavent-Climent A. Escobedo J. Donaire-Avila E. Oliver-Saiz A. L. Ramírez-Márquez 《Bulletin of Earthquake Engineering》2014,12(5):2049-2073
The city of Lorca (Spain) was hit on May 11th, 2011, by two consecutive earthquakes of magnitudes 4.6 and 5.2 M \(_\mathrm{w}\) , causing casualties and important damage in buildings. Many of the damaged structures were reinforced concrete frames with wide beams. This study quantifies the expected level of damage on this structural type in the case of the Lorca earthquake by means of a seismic index \(I_{v}\) that compares the energy input by the earthquake with the energy absorption/dissipation capacity of the structure. The prototype frames investigated represent structures designed in two time periods (1994–2002 and 2003–2008), in which the applicable codes were different. The influence of the masonry infill walls and the proneness of the frames to concentrate damage in a given story were further investigated through nonlinear dynamic response analyses. It is found that (1) the seismic index method predicts levels of damage that range from moderate/severe to complete collapse; this prediction is consistent with the observed damage; (2) the presence of masonry infill walls makes the structure very prone to damage concentration and reduces the overall seismic capacity of the building; and (3) a proper hierarchy of strength between beams and columns that guarantees the formation of a strong column-weak beam mechanism (as prescribed by seismic codes), as well as the adoption of counter-measures to avoid the negative interaction between non-structural infill walls and the main frame, would have reduced the level of damage from \(I_{v}\) \(\,=\,\) 1 (collapse) to about \(I_{v}\) \(\,=\,\) 0.5 (moderate/severe damage). 相似文献
11.
Changes in dynamic characteristics of Lorca RC buildings from pre- and post-earthquake ambient vibration data 总被引:2,自引:2,他引:0
This paper estimates fundamental translational period and damping ratio parameters and examines the changes in dynamic characteristics of a set of low-to-medium rise buildings in Lorca town (SE of Spain) affected by the May 11th, 2011 earthquake. These building parameters have been calculated analysing structural dynamic response from ambient vibration measurements recorded at top RC buildings pre- and post earthquake, using the Fast Fourier Transform and the Randomdec technique. The empirical expression relating period \((T)\) and number of floor \((N)\) here obtained analysing ambient noise recorded on 59 healthy buildings before the earthquake is \(T= (0.054\pm 0.002)\, N\) , very similar to others empirical period–height relationships obtained for RC structures in the European built environment but quite different from code provisions. Measurements performed in 34 damaged buildings show a period elongation after the quake according to \(T^{*} =(0.075\pm 0.002)\,N\) expression. Moreover, we found a rise of the fundamental period with the EMS’s grade of damage of buildings. In contrast to natural frequency, damping ratio \((\xi )\) do not shows a significant variation with earthquake damage degree and the product \(\xi \, T\) remains near constant. 相似文献
12.
We tested attenuation relations obtained for different regions of the world to verify their suitability to predict strong-motion data recorded by Medellín and Aburrá Valley Accelerographic Networks. We used as comparison criteria, the average of the difference between the observed and the predicted data as a function of epicenter distance and its standard deviation. We also used the approach developed by Sherbaum et al. (Bull Seism Soc Am 94:2164–2185, 2004) that provides a method to evaluate the overall goodness-of-fit of ground-motion prediction equations. The predictive models selected use a generic focal depth. We found that this parameter has an important influence in the ground-motion predictions and must be taken into account as an independent variable. We also found important to characterize the local soil amplification to improve the attenuation relations. We found empirical relations for peak horizontal acceleration PGA and velocity PGV based on the Kamiyama and Yanagisawa (Soils Found 26:16–32, 1986) approach. $$\begin{aligned} \log _{10} (PGA)=0.5886M_L -1.0902\log _{10}(R)-0.0035H+C_{st}\pm 0.\text{29} \end{aligned}$$ $$\begin{aligned} \log _{10} (PGV)=0.7255M_L -1.8812\log _{10}(R)-0.0016H+C_{st}\pm 0.36 \end{aligned}$$ where PGA is measured in cm/s $^{2}$ and PGV in cm/s, $M_{L}$ is local magnitude in the range 2.8–6.5, $R$ is epicentral distance up to 290 km, $H$ is focal depth in km and $C_{st}$ is a coefficient that accounts for the site response due to soil conditions of each recording station. The introduction of focal depth and local site conditions as independent variables, minimize the residuals and the dispersion of the predicted data. We conclude that $H$ and $C_{st}$ are sensitive parameters, having a strong influence on the strong-motion predictions. Using the same functional form, we also propose an empirical relation for the root mean square acceleration a $_\mathrm{rms}$ : $$\begin{aligned} \log _{10} \left( {a_{rms} } \right)=0.4797M_L -1.1665\log _{10} (R)-0.00201H+C_{st}\pm 0.40 \end{aligned}$$ where a $_\mathrm{rms}$ is measured in cm/s $^{2}$ , from the S-wave arrival and using a window length equal to the rupture duration. The other variables are the same as those for PGA and PGV. The site correction coefficients $C_{st}$ found for PGA, PGV and a $_\mathrm{rms}$ show a similar trend indicating a good correlation with the soil conditions of the recording sites. 相似文献
13.
Jie Liu Yunpeng Li Rehan Sadiq Yong Deng 《Stochastic Environmental Research and Risk Assessment (SERRA)》2014,28(6):1323-1331
Many researches have been conducted on the health influence of Particle Matter with diameters less than 2.5 microns (PM \(_{2.5}\) ). There are also some researches on the cause of PM \(_{2.5}\) . However, such research generally focuses on the economic and political aspect of the environment issue. In this paper, a data-analysis approach of the PM \(_{2.5}\) issue is raised to offer a new viewpoint of this problem. The applied method extracts the relations of air quality system record as a relation map, which illustrates the influence among the parameters in a graph. The method successfully fitted the weather record, and derived from it the influencers of PM \(_{2.5}\) . The result shows that the average temperature, average barometric pressure and concentration of Ozone are all factors that have an influence on the concentration of PM \(_{2.5}.\) A short justification of it is also provided. 相似文献
14.
New code site classification, amplification factors and normalized response spectra based on a worldwide ground-motion database 总被引:2,自引:2,他引:0
Kyriazis Pitilakis Evi Riga Anastasios Anastasiadis 《Bulletin of Earthquake Engineering》2013,11(4):925-966
A global dataset of more than 3,000 ground motion records from 536 sites from Greece, Italy, Turkey, USA and Japan is compiled and used to propose code-oriented elastic acceleration response spectra and soil amplification factors for a new site classification system, which, besides the classical geotechnical parameters $N_{SPT}, S_{u}$ and PI, uses also the fundamental period of the site, the thickness of soil deposits and the average shear wave velocity to the seismic bedrock, instead of $V_{s,30}$ . We propose a new classification system with the associated amplification factors and normalized response spectra for two seismicity levels, i.e. $M_{s}\le 5.5$ and $M_{s}>5.5$ . Uncertainties in the estimation of soil amplification factors are captured using a logic-tree approach, which allows the efficient use of alternative models and methods. The aim of this work is to improve the present EC8 soil classification. The effectiveness of the proposed classification system is compared to that of EC8 classification system using an error term, which represents the average dispersion of data within all categories of a given classification scheme. Error terms for the new classification system are lower than the error terms for EC8 classification system at all periods. 相似文献
15.
A simple biogeochemical model coupled to an offline ocean tracer transport model driven by reanalysis ocean data is used to simulate the seasonal and interannual CO $_2$ flux variability in the northern Indian Ocean. The maximum of seasonal and interannual CO $_2$ emission variances in the northern Indian Ocean are located in the coastal Arabian Sea (AS) and Southern Peninsular India (SP) with a basin-wide seasonal amplitude and standard deviation of 0.044 $\pm $ 0.04 Pg C year $^{-1}$ . The area integrated CO $_2$ emissions from these two regions in the model are significantly correlated (above a 95 % level) with the observations of Takahashi et al. (Deep-Sea Res-II, 56:554–577, 2009). The interannual anomalies of CO $_2$ emission from the AS and SP are found as 40 and 30 % of their respective seasonal amplitudes. Both the Arabian Sea (AS) and Southern Peninsular India (SP) interannual CO $_2$ emission anomalies show a 3–4-year variability. The correlations of AS and SP CO $_2$ emission anomalies with the Indian Ocean Dipole/Zonal Mode (IODZM) and Southern Oscillation (SO) indices from 1980 to 1999 are 0.35, 0.21 and 0.32, 0.01 respectively. A 5-year window moving correlation analysis shows that the relationship of AS and SP CO $_2$ emission to the SO and IODZM are complementary to each other. During the years when the correlation of air–sea CO $_2$ emission with the IODZM is stronger, the corresponding correlation with the SO is weaker or opposite. The total change in pCO $_2$ is broken down into changes induced by the individual components such as dissolved inorganic carbon (DIC), sea surface temperature (SST), alkalinity, and salinity and found that (1) the effect of SST in the AS CO $_2$ emission increases (decreases) when the correlation of CO $_2$ emission with the IODZM is positive (negative), and (2) the SP CO $_2$ emission is strongly controlled by the circulation-driven DIC changes; however, this relation is found to be weaker when the SO correlates negatively with the SP CO $_2$ emission. 相似文献
16.
Mantle Transition Zone Structure Beneath Southeastern China and its Implications for Stagnant Slab and Water Transportation in the Mantle 总被引:3,自引:0,他引:3
We determined depth variation of the 410- and 660-km discontinuities beneath southeastern China by common-converted-point stacking of \(\rm P\) -wave receiver functions of 121 permanent Chinese seismic stations. We then combined the results with seismic velocity variation to estimate temperature and water content variations in the mantle transition zone of the region. Previous tomographic studies have shown a stagnant slab in the mantle transition zone in eastern Asia that is connected to subduction of the western Pacific. Temperature variations obtained clearly outline the shape of the stagnant slab, with its western edge at 113.5 \(^\circ\) E and the southern edge at 28.5 \(^\circ\) N. The correlation between the location of the stagnant slab and surface tectonics suggests that the Cenozoic extension in eastern China is closely associated with the subduction of the western Pacific and its eastward migration. The water content of the stagnant slab is lower than in surrounding slabs, suggesting that the water has already been released from the subducting slab into the upper mantle. 相似文献
17.
Melina Bosco Edoardo M. Marino Pier Paolo Rossi 《Bulletin of Earthquake Engineering》2013,11(5):1423-1445
This paper describes a new method for the evaluation of the static eccentricity $e_{s}$ and the ratio $\Omega _{\uptheta } $ of uncoupled torsional to lateral frequencies in real multi-storey buildings. The above-mentioned parameters greatly affect the lateral-to-torsional coupling of the response of asymmetric systems and thus are of paramount importance in the assessment of the in-plan irregularity of buildings. The proposed method, which is a generalization of that suggested by Calderoni et al. (Earthq Spectra 18(2):219–231, 2002), allows the calculation of the static eccentricity $e_{s}$ and the ratio $\Omega _{\uptheta } $ from the structural response to arbitrary distributions of forces and torsional couples. The effectiveness of the method is validated on some regularly and non-regularly asymmetric buildings characterised by different in-plan irregularity. The analyses demonstrate that the results of the method are rigorous in the case of regularly asymmetric systems and only slightly depend upon the heightwise distribution of the forces in the case of non-regularly asymmetric systems. Finally, the values of the static eccentricity $e_{s}$ and the ratio $\Omega _{\uptheta } $ resulting from the proposed method are compared to those obtained by means of the procedure suggested by Makarios and Anastassiadis in (Struct Des Tall Spec Build 7(1):33–55, 1998a; Struct Des Tall Spec Build 7(1):57–71, 1998b) . 相似文献
18.
19.
Boumédiène Derras Pierre Yves Bard Fabrice Cotton 《Bulletin of Earthquake Engineering》2014,12(1):495-516
We have used the Artificial Neural Network method (ANN) for the derivation of physically sound, easy-to-handle, predictive ground-motion models from a subset of the Reference database for Seismic ground-motion prediction in Europe (RESORCE). Only shallow earthquakes (depth smaller than 25 km) and recordings corresponding to stations with measured $V_{s30}$ properties have been selected. Five input parameters were selected: the moment magnitude $M_{W}$ , the Joyner–Boore distance $R_{JB}$ , the focal mechanism, the hypocentral depth, and the site proxy $V_{S30}$ . A feed-forward ANN type is used, with one 5-neuron hidden layer, and an output layer grouping all the considered ground motion parameters, i.e., peak ground acceleration (PGA), peak ground velocity (PGV) and 5 %-damped pseudo-spectral acceleration (PSA) at 62 periods from 0.01 to 4 s. A procedure similar to the random-effects approach was developed to provide between and within event standard deviations. The total standard deviation ( $\sigma $ ) varies between 0.298 and 0.378 (log $_{10}$ unit) depending on the period, with between-event and within-event variabilities in the range 0.149–0.190 and 0.258–0.327, respectively. Those values prove comparable to those of conventional GMPEs. Despite the absence of any a priori assumption on the functional dependence, our results exhibit a number of physically sound features: magnitude scaling of the distance dependency, near-fault saturation distance increasing with magnitude, amplification on soft soils and even indications for nonlinear effects in softer soils. 相似文献
20.
Empirical ground-motion models for point- and extended-source crustal earthquake scenarios in Europe and the Middle East 总被引:12,自引:9,他引:3
This article presents the latest generation of ground-motion models for the prediction of elastic response (pseudo-) spectral accelerations, as well as peak ground acceleration and velocity, derived using pan-European databases. The models present a number of novelties with respect to previous generations of models (Ambraseys et al. in Earthq Eng Struct Dyn 25:371–400, 1996, Bull Earthq Eng 3:1–53, 2005; Bommer et al. in Bull Earthq Eng 1:171–203, 2003; Akkar and Bommer in Seismol Res Lett 81:195–206, 2010), namely: inclusion of a nonlinear site amplification function that is a function of $\text{ V }_\mathrm{S30}$ and reference peak ground acceleration on rock; extension of the magnitude range of applicability of the model down to $\text{ M }_\mathrm{w}$ 4; extension of the distance range of applicability out to 200 km; extension to shorter and longer periods (down to 0.01 s and up to 4 s); and consistent models for both point-source (epicentral, $\text{ R }_\mathrm{epi}$ , and hypocentral distance, $\text{ R }_\mathrm{hyp}$ ) and finite-fault (distance to the surface projection of the rupture, $\text{ R }_\mathrm{JB}$ ) distance metrics. In addition, data from more than 1.5 times as many earthquakes, compared to previous pan-European models, have been used, leading to regressions based on approximately twice as many records in total. The metadata of these records have been carefully compiled and reappraised in recent European projects. These improvements lead to more robust ground-motion prediction equations than have previously been published for shallow (focal depths less than 30 km) crustal earthquakes in Europe and the Middle East. We conclude with suggestions for the application of the equations to seismic hazard assessments in Europe and the Middle East within a logic-tree framework to capture epistemic uncertainty. 相似文献