MINERALOGICAL RELATIONSHIPS IN SEYMOUR,A COARSE OCTAHEDRITE

Seymour is a coarse octahedrite weighing 24.5 kg. It contains two types of troilite-graphite nodules (massive graphite nodules with irregular troilite rims, and troilite nodules with irregular, partial or total, rims of graphite); four morphologically distinct types of phosphide (lamellar, swathing, grain boundary, and rhabdite); and three types of cohenite (lamellar, swathing, and inclusions in kamacite). It is believed that lamellar and swathing schreibersite crystallized from taenite at approximately 900°C. This was followed by the crystallization of kamacite, then the development of cohenite, and finally a second period of phosphide nucleation giving rise to grain boundary schreibersite and rhabdite. Compositional data indicates that grain boundary schreibersite and rhabdite grew simultaneously.     

Mineralogy and 57Fe Mössbauer spectroscopy of opaque phases in the Neuschwanstein EL6 chondrite

Abstract— This study presents compositional data and ⁵⁷Fe Mössbauer spectra, taken at 295 K and 85 K, of two fragments of the enstatite (EL6) chondrite Neuschwanstein that fell near the famous Neuschwanstein castle (Bavaria, southern Germany) on April 6, 2002. Main silicate minerals are enstatite (Fs 2) and plagioclase (An 20), the main opaque minerals are kamacite and troilite. Small amounts of oldhamite, daubreelite, and schreibersite have been found. The presented Mössbauer data are the first data gathered for an EL6 chondrite. The dominant parts of each Mössbauer spectrum consist of two six‐line patterns due to the presence of ferromagnetic phases kamacite and troilite. In contrast to other chondrites, peaks of other iron species in the central parts of the spectra are missing due to an extremely low content of Fe‐bearing paramagnetic components. The hyperfine interaction parameters for kamacite are internal magnetic hyperfine field H_hf = 333.2 kOe, isomer shift (relative to a metallic Fe foil) IS = 0.01 mm/s, quadrupole splitting QS = 0 mm/s, line width W = 0.41 mm/s. The data for troilite are H_hf = 305.5 kOe, IS = 0.75 mm/s, QS = ?0.85 mm/s, W = 0.34 mm/s.     

The New Peruvian Meteorite Carancas: Mössbauer Spectroscopy and X-Ray Diffraction Studies

The Carancas meteorite fell on 15 September 2007 approximately 10 km south of Desaguadero, near Lake Titicaca, Peru, producing bright lights, clouds of dust in the sky and intense detonations. The Carancas meteorite is classified as a H4–5 ordinary chondrite with shock stage S3 and a degree of weathering W0. The Carancas meteorite is characterized by well defined chondrules composed either of olivine or pyroxene. The Mössbauer spectra show an overlapping of paramagnetic and magnetic phases. The spectra show two quadrupole doublets associated to olivine and pyroxene; and two magnetic sextets, associated with the primary phases kamacite/taenite and Troilite (Fe²⁺). Metal particles were extracted from the bulk powdered samples exhibit only kamacite and small amounts of the intergrowth tetrataenite/antitaenite. X-Ray diffractogram shows the primary phases olivine, pyroxene, troilite, kamacite, diopside and albite. Iron oxides has not been detected by Mössbauer spectroscopy or XRD as can be expected for a meteorite immediately recovered after its fall.     

Mineralogy of meteorite groups

Abstract— Approximately 275 mineral species have been identified in meteorites, reflecting diverse redox environments, and, in some cases, unusual nebular formation conditions. Anhydrous ordinary, carbonaceous and R chondrites contain major olivine, pyroxene and plagioclase; major opaque phases include metallic Fe-Ni, troilite and chromite. Primitive achondrites are mineralogically similar. The highly reduced enstatite chondrites and achondrites contain major enstatite, plagioclase, free silica and kamacite as well as nitrides, a silicide and Ca-, Mg-, Mn-, Na-, Cr-, K- and Ti-rich sulfides. Aqueously altered carbonaceous chondrites contain major amounts of hydrous phyllosilicates, complex organic compounds, magnetite, various sulfates and sulfides, and carbonates. In addition to kamacite and taenite, iron meteorites contain carbides, elemental C, nitrides, phosphates, phosphides, chromite and sulfides. Silicate inclusions in IAB/IIICD and IIE iron meteorites consist of mafic silicates, plagioclase and various sulfides, oxides and phosphates. Eucrites, howardites and diogenites have basaltic to orthopyroxenitic compositions and consist of major pyroxene and calcic plagioclase and several accessory oxides. Ureilites are made up mainly of calcic, chromian olivine and low-Ca clinopyroxene embedded in a carbonaceous matrix; accessory phases include the C polymorphs graphite, diamond, lonsdaleite and chaoite as well as metallic Fe-Ni, troilite and halides. Angrites are achondrites rich in fassaitic pyroxene (i.e., Al-Ti diopside); minor olivine with included magnesian kirschsteinite is also present. Martian meteorites comprise basalts, lherzolites, a dunite and an orthopyroxenite. Major phases include various pyroxenes and olivine; minor to accessory phases include various sulfides, magnetite, chromite and Ca-phosphates. Lunar meteorites comprise mare basalts with major augite and calcic plagioclase and anorthositic breccias with major calcic plagioclase. Several meteoritic phases were formed by shock metamorphism. Martensite (α₂-Fe,Ni) has a distorted body-centered-cubic structure and formed by a shear transformation from taenite during shock reheating and rapid cooling. The C polymorphs diamond, lonsdaleite and chaoite formed by shock from graphite. Suessite formed in the North Haig ureilite by reduction of Fe and Si (possibly from olivine) via reaction with carbonaceous matrix material. Ringwoodite, the spinel form of (Mg,Fe)₂SiO₄, and majorite, a polymorph of (Mg,Fe)SiO₃ with the garnet structure, formed inside shock veins in highly shocked ordinary chondrites. Secondary minerals in meteorite finds that formed during terrestrial weathering include oxides and hydroxides formed directly from metallic Fe-Ni by oxidation, phosphates formed by the alteration of schreibersite, and sulfates formed by alteration of troilite.     

MINERALOGY,PETROLOGY AND CHEMISTRY OF THE MESSINA (ITALY) CHONDRITE

The meteorite which fell near Messina, Italy, on 16 July 1955 is a typical olivine-hypersthene (L-group) chondrite. Its mineralogical composition is: olivine (Fa24), orthopyroxene (Fs20) with some polysynthetically twinned clynopyroxene, plagioclase (An10) and merrillite. Opaque phases present are: copper, kamacite, taenite, plessite, chalcopyrrhotite, mackinawite, troilite and chromite. The stone contains abundant chondrules. The matrix consists chiefly of broken chondrules with tiny fragments of crystals and rare amorphous material. Chondrules form more than 42% of the meteorite by volume. Some unusual features of the fabric of this meteorite include silicate grains showing deformation; silicates with fusion spots of dark glass containing blebs of metallic iron; iron and troilite with marginal fusion yielding globules and droplets sometimes showing flow structures. The classification of this chondrite is confirmed by bulk chemical analysis.     

THE TIMMERSOI†, NIGER,HYPERSTHENE CHONDRITE

The Timmersoi meteorite, a new type L5 hypersthene chondrite from the Niger Republic is described and microprobe analyses of its olivine, orthopyroxene, clinopyroxene, plagioclase, kamacite, taenite, troilite, chromite, whitlockite, chlorapatite and limonite presented. Veins and patches of black “glassy” material are regarded as products of shock melting. In places this material contains immiscible droplets of troilite each with one or more well-formed crystals of taenite. Calculations indicate equilibrium between olivine and orthopyroxene with a temperature of equilibration of about 850 °C.     

Metallographic cooling rates of group IIF iron meteorites

Abstract— Metallographic cooling rates have been calculated for all five members of the iron meteorites group IIF using two different techniques. We have determined cooling rates of ～5 °C/Ma based on Ni profiles through the taenite rim enclosing kamacite spindles. Ni profiles through the kamacite phase are less precise cooling rate indicators, but suggest a cooling rate of ～1 °C/Ma within an order of magnitude at lower temperatures (360–400 °C). Based on the kamacite bandwidth and the Ni profiles through the taenite, we estimate that the kamacite nucleated 130–200 °C below the temperature predicted from the phase diagram. The size of and the distance between the large kamacite spindles is found to be consistent with the thermal history that we have determined on the basis of Ni profiles in kamacite and taenite. We find that previously published kamacite bandwidth cooling rates for the five group IIF members are most likely in error because of the presence of large schreibersite spindles in some kamacite spindles and because undercooling of kamacite was ignored. Contrary to previous workers we find that the metallographic cooling rates are consistent with cooling in a common core.     

Mineralogical and Geochemical Study of Zhaoping,Xifu and Hami Iron Meteorites

The mineralogy and bulk chemical compositions of three iron meteorites (Zhaoping, Xifu and Hami) recently found in China are reported here and are classified on the basis of their bulk chemical compositions. Zhaoping contains 93.4 mg/g Ni, 85.9 μg/g Ga, 418 μg/g Ge, 5.24 mg/g Co, 1.94 μg/g Ir, 0.774 μg/g W, and 1.62 μg/g Au and belongs to the low-Ni, low-Au subgroup of IAB. It is a coarse octahedrite and consists of kamacite, taenite, troilite, schreibersite and cohenite. The cohenite has entirely decomposed to graphite and low-Ni kamacite in our samples. Zhaoping contains some inclusions of Mn-free sarcopside which were rarely reported in IAB iron meteorites. Xifu has 74.1 mg/g Ni, 58.8gμg/g Ga, 150 μg/g Ge, and 0.913 μg/g W. Xifu is a member of group IIICD iron meteorite. Like most of IIICD irons, Xifu is a coarsest octahedrite with kamacite bandwidth larger than 3mm, and contains kamacite, taenite and schreibersite. Carbides and graphite are not found in the sample because of its being heterogeneous. Hami has 106 mg/g Ni, 5.36 mg/g Co and 0.922 μg/g Ir. We did not obtain the Ga and Ge contents in Hami because of their low concentrations and the limited precision of the INAA technique. Hami is an unclassified iron meteorite on the basis of the contents of other trace elements, structure and mineralogy. On mineralogy and structure, Hami resembles Rafruti, another unclassified iron meteorite.     

MINERALOGY AND PETROLOGY OF THE YILMIA ENSTATITE CHONDRITE

Yilmia, a new enstatite chondrite contains moderately well defined radiating and granular chondrules. The plagioclase to enstatite ratio is appreciably higher within than outside of the two granular chondrules in our microprobe sections. Osbornite was observed within the granular chondrules, but not in the rayed chondrules or surrounding matrix Major phases include enstatite, plagioclase (Ab₈₀ An₁₆ Or₄), silica, silicon-rich kamacite and titanian troilite. Minor phases are many and varied: sinoite, silicon-rich taenite, schreibersite, graphite, osbornite, oldhamite, “normal” and zincian daubreelite, ferroan alabandite and a new FeZnMn monosulfide The new mineral (Fe_.538 Zn_.246 Mn_.159 Mg_.004 S) closely resembles albandite and could easily have been overlooked in other meteorites unless a microprobe was used. A new form of oldhamite was also found. Indarch oldhamite, analyzed for comparative purposes, consists of two similar but distinct species: Ca_.96 Mn_.005 Mg_.04 Fe_.01 S and Ca_1.000 Mn_.004 Mg_.02 Fe_.005 S. These have not been reported from other meteorites Based on its mineralogy and texture this is a type II (E6) enstatite chondrite that is transitional toward the intermediate type (E5). It is unique in its mineralogical complexity, abundance of taenite, diversity of zincian minerals and monosulfides, and restriction of osbornite to certain chondrules     

Ulasitai: A new iron meteorite likely paired with Armanty (IIIE)

Abstract— The Ulasitai iron was recently found about 130 km southeast to the find site of the Armanty (Xinjiang, IIIE) meteorite. It is a coarse octahedrite with a kamacite bandwidth of 1.2 ± 0.2 (0.9–1.8) mm. Plessite is abundant, as is taenite, kamacite, cohenite, and schreibersite with various microstructures. Schreibersite is Ni‐rich (30.5–55.5 wt%) in plessite or coexisting with troilite and daubreelite, in comparison with the coarse laths (20.6–21.2 wt%) between the Widmanstätten pattern plates. The correlation between the center Ni content and the half bandwidth of taenite suggest a cooling rate of ?20 °C/Myr based on simulations. The petrography and mineral chemistry of Ulasitai are similar to Armanty. The bulk samples of Ulasitai were measured, together with Armanty, Nandan (IIICD), and Mundrabilla (IIICD), by inductively coupled plasma atomic emission spectrometry (ICP‐AES) and mass spectrometry (ICP‐MS). The results agree with literature data of the same meteorites, and our analyses of four samples of Armanty (L1, L12, L16, L17) confirm a homogeneous composition (Wasson et al. 1988). The bulk composition of Ulasitai is identical to that of Armanty, both plotting within the IIIE field. We classify Ulasitai as a new IIIE iron and suggest that it pairs with Armanty.     

Fe‐bearing phases in a ureilite fragment from the asteroid 2008 TC3 (= Almahata Sitta meteorites): A combined Mössbauer spectroscopy and X‐ray diffraction study

The iron‐bearing phases in a ureilite fragment (AS#051) from the Almahata Sitta meteorite are studied using Mössbauer spectroscopy, X‐ray diffraction (XRD), and electron microprobe analysis (EMPA). AS#051 has a typical ureilite texture of medium‐ to coarse‐grained silicates (olivine, orthopyroxene, and pigeonite) with minor opaques (Fe‐Ni metal, troilite, and graphite). The silicate compositions, determined by EMPA, are homogeneous: olivine (Fo_90.2), orthopyroxene (En_86.3Fs_8.6Wo_5.1), and pigeonite (En_81.6Fs_8.9Wo_9.5), and are similar to those of magnesian ureilites. The modal abundance of mineral phases was determined by Rietveld refinement of the powder XRD data. The Mössbauer spectra at 295 K and 78 K are composed of two sharp well‐defined paramagnetic doublets superimposed on a well‐resolved magnetic sextet and other weak absorption features. The two paramagnetic doublets are assigned to olivine and pyroxene (orthopyroxene and pigeonite), and the ferromagnetic sextet to kamacite (magnetic hyperfine field ≈ 33.2 T), in agreement with the XRD characterization. The Mössbauer results also show the presence of small amounts of troilite (FeS) and cohenite ([Fe,Ni,Co]₃C). Using the Mössbauer data, the relative abundance of each Fe‐bearing phase is determined and compared with the results obtained by XRD.     

Shock effects in the Willamette ungrouped iron meteorite

A slab of the Willamette ungrouped iron contains elongated troilite nodules (up to ~2 × 10 cm) that were crushed and penetrated by wedges of crushed metal during a major impact event. What makes this sample unique is the contrast between the large amount of shock damage and the very small (~1%) amounts of shock melting in the large troilite nodules. The postshock temperature was low, probably ?960 °C. The Widmanstätten pattern has been largely obscured by an episode of postshock annealing that caused recrystallization of the kamacite. The shock and thermal history of Willamette includes (1) initial crystallization and formation of multicentimeter‐size troilite nodules from trapped melt, (2) impact‐induced melting of metal‐sulfide assemblages to form lobate taenite masses a few hundred micrometers in size, (3) impact‐crushing of the nodules and jamming of metal wedges into them, (4) simultaneous crushing of metal grains adjacent to sulfide throughout the meteorite, (5) postshock annealing causing minor recrystallization of metal and troilite, and (6) a late‐stage shock event (and additional annealing) producing Neumann lines in the kamacite.     

GALLIUM-BEARING SPHALERITE IN A METAL-SULFIDE NODULE OF THE QINGZHEN (EH3) CHONDRITE

The Qingzhen (EH3) chondrite contains a population of spheroidal metal-sulfide nodules, which display textural evidence of reheating and melting. Evidence of metal sulfuration is also present, suggesting replacement of metal by sulfide during melting. This process has led to the nucleation of perryite along metal-sulfide interfaces. Gallium-bearing sphalerite and a Cu-sulfide of composition intermediate between chalcopyrite and cubanite occur as inclusions within the metal of some nodules. Other phases present are: kamacite, troilite, Ga-free sphalerite, niningerite, perryite, schreibersite, oldhamite, Cr-sulfide (minerals A and B), djerfisherite, SiO₂, albite and enstatite. The Ga-bearing sphalerite may have formed by injection of molten sulfide droplets into the metal followed by subsolidus diffusion of Ga from the metal into the sulfide. The latter may occur because of Ga supersaturation in the metal during progressive sulfuration and its decreased affinity for the metal phase during cooling below the taenite-kamacite transition point.     

Thermal and impact histories of reheated group IVA,IVB, and ungrouped iron meteorites and their parent asteroids

Abstract– The microstructures of six reheated iron meteorites—two IVA irons, Maria Elena (1935), Fuzzy Creek; one IVB iron, Ternera; and three ungrouped irons, Hammond, Babb’s Mill (Blake’s Iron), and Babb’s Mill (Troost’s Iron)—were characterized using scanning and transmission electron microscopy, electron‐probe microanalysis, and electron backscatter diffraction techniques to determine their thermal and shock history and that of their parent asteroids. Maria Elena and Hammond were heated below approximately 700–750 °C, so that kamacite was recrystallized and taenite was exsolved in kamacite and was spheroidized in plessite. Both meteorites retained a record of the original Widmanstätten pattern. The other four, which show no trace of their original microstructure, were heated above 600–700 °C and recrystallized to form 10–20 μm wide homogeneous taenite grains. On cooling, kamacite formed on taenite grain boundaries with their close‐packed planes aligned. Formation of homogeneous 20 μm wide taenite grains with diverse orientations would have required as long as approximately 800 yr at 600 °C or approximately 1 h at 1300 °C. All six irons contain approximately 5–10 μm wide taenite grains with internal microprecipitates of kamacite and nanometer‐scale M‐shaped Ni profiles that reach approximately 40% Ni indicating cooling over 100–10,000 yr. Un‐decomposed high‐Ni martensite (α₂) in taenite—the first occurrence in irons—appears to be a characteristic of strongly reheated irons. From our studies and published work, we identified four progressive stages of shock and reheating in IVA irons using these criteria: cloudy taenite, M‐shaped Ni profiles in taenite, Neumann twin lamellae, martensite, shock‐hatched kamacite, recrystallization, microprecipitates of taenite, and shock‐melted troilite. Maria Elena and Fuzzy Creek represent stages 3 and 4, respectively. Although not all reheated irons contain evidence for shock, it was probably the main cause of reheating. Cooling over years rather than hours precludes shock during the impacts that exposed the irons to cosmic rays. If the reheated irons that we studied are representative, the IVA irons may have been shocked soon after they cooled below 200 °C at 4.5 Gyr in an impact that created a rubblepile asteroid with fragments from diverse depths. The primary cooling rates of the IVA irons and the proposed early history are remarkably consistent with the Pb‐Pb ages of troilite inclusions in two IVA irons including the oldest known differentiated meteorite ( Blichert‐Toft et al. 2010 ).     

The Leedey,Oklahoma, chondrite: Fall,petrology, chemistry and an unusual Fe,Ni-FeS inclusion

Abstract— The Leedey, Oklahoma, meteorite shower fell on 1943 November 25, following a fireball which was visible across much of southwestern Oklahoma and northcentral Texas. The shower produced 24 stones with a total mass of ～51.5 kg. The stones formed a strewnfield ～18 km in length in the same direction as the observed path of the meteor (N50°W). Leedey is classified as an L6(S3) ordinary chondrite. We report bulk major element chemical analyses from four separate laboratories. Leedey contains an unusual 6 by 8 mm composite Fe,Ni-FeS grain, which is composed of a 3 mm kamacite grain adjacent to a 5 mm troilite grain. A 50–100 μm rim of high-Ni (45–55 wt%) taenite (tetrataenite) occurs at the boundary between kamacite and troilite. A single, zoned pyrophanite grain is observed at the boundary between the inclusion troilite and host silicates. An origin as a foreign particle incorporated after metamorphism or during impact melting appears unlikely. This particle likely formed by a complex set of processes, including melting in the nebula, parent body metamorphism and reheating by later shock, mirroring the history of the host chondrite.     

Clastic matrix in EH3 chondrites

Abstract— Patches of clastic matrix (15 to 730 μm in size) constitute 4.9 vol% of EH3 Yamato (Y‐) 691 and 11.7 vol% of EH3 Allan Hills (ALH) 81189. Individual patches in Y‐691 consist of 1) ?25 vol% relatively coarse opaque grain fragments and polycrystalline assemblages of kamacite, schreibersite, perryite, troilite (some grains with daubréelite exsolution lamellae), niningerite, oldhamite, and caswellsilverite; 2) ?30 vol% relatively coarse silicate grains including enstatite, albitic plagioclase, silica and diopside; and 3) an inferred fine nebular component (?45 vol%) comprised of submicrometer‐size grains. Clastic matrix patches in ALH 81189 contain relatively coarse grains of opaques (?20 vol%; kamacite, schreibersite, perryite and troilite) and silicates (?30 vol%; enstatite, silica and forsterite) as well as an inferred fine nebular component (?50 vol%). The O‐isotopic composition of clastic matrix in Y‐691 is indistinguishable from that of olivine and pyroxene grains in adjacent chondrules; both sets of objects lie on the terrestrial mass‐fractionation line on the standard three‐isotope graph. Some patches of fine‐grained matrix in Y‐691 have distinguishable bulk concentrations of Na and K, inferred to be inherited from the solar nebula. Some patches in ALH 81189 differ in their bulk concentrations of Ca, Cr, Mn, and Ni. The average compositions of matrix material in Y‐691 and ALH 81189 are similar but not identical‐matrix in ALH 81189 is much richer in Mn (0.23 ± 0.05 versus 0.07 ± 0.02 wt%) and appreciably richer in Ni (0.36 ± 0.10 versus 0.18 ± 0.05 wt%) than matrix in Y‐691. Each of the two whole‐rocks exhibits a petrofabric, probably produced by shock processes on their parent asteroid.     

The Fukang pallasite: Characterization and implications for the history of the Main‐group parent body

We report the results of a study of the Fukang pallasite that includes measurements of bulk composition, mineral chemistry, mineral structure, and petrology. Fukang is a Main‐group pallasite that consists of semiangular olivine grains (Fo 86.3) embedded in an Fe‐Ni matrix with 9–10 wt% Ni and low‐Ir (45 ppb). Olivine grains sometimes occur in large clusters up to 11 cm across. The Fe‐Ni phase is primarily kamacite with accessory taenite and plessite. Minor phases include schreibersite, chromite, merrillite, troilite, and low‐Ca pyroxene. We describe a variety of silicate inclusions enclosed in olivine that contain phases rarely or not previously reported in Main‐group pallasites, including clinopyroxene (augite), tridymite, K‐rich felsic glass, and an unknown Ca‐Cr silicate. Pressure constraints determined from tridymite (<0.4 GPa), two‐pyroxene barometry (0.39 ± 0.07 GPa), and geophysical calculations that assume pallasite formation at the core–mantle boundary (CMB), provide an upper estimate on the size of the Main‐group parent body from which Fukang originated. We conclude that Fukang originated at the CMB of a large differentiated planetesimal 400–680 km in radius.     

Ordinary chondrite metallography: Part 2. Formation of zoned and unzoned metal particles in relatively unshocked H,L, and LL chondrites

Abstract— We studied the metallography of Fe‐Ni metal particles in 17 relatively unshocked ordinary chondrites and interpreted their microstructures using the results of P‐free, Fe‐Ni alloy cooling experiments (described in Reisener and Goldstein 2003). Two types of Fe‐Ni metal particles were observed in the chondrites: zoned taenite + kamacite particles and zoneless plessite particles, which lack systematic Ni zoning and consist of tetrataenite in a kamacite matrix. Both types of metal particles formed during metamorphism in a parent body from homogeneous, P‐poor taenite grains. The phase transformations during cooling from peak metamorphic temperatures were controlled by the presence or absence of grain boundaries in the taenite particles. Polycrystalline taenite particles transformed to zoned taenite + kamacite particles by kamacite nucleation at taenite/taenite grain boundaries during cooling. Monocrystalline taenite particles transformed to zoneless plessite particles by martensite formation and subsequent martensite decomposition to tetrataenite and kamacite during the same cooling process. The varying proportions of zoned taenite + kamacite particles and zoneless plessite particles in types 4–6 ordinary chondrites can be attributed to the conversion of polycrystalline taenite to monocrystalline taenite during metamorphism. Type 4 chondrites have no zoneless plessite particles because metamorphism was not intense enough to form monocrystalline taenite particles. Type 6 chondrites have larger and more abundant zoneless plessite particles than type 5 chondrites because intense metamorphism in type 6 chondrites generated more monocrystalline taenite particles. The distribution of zoneless plessite particles in ordinary chondrites is entirely consistent with our understanding of Fe‐Ni alloy phase transformations during cooling. The distribution cannot be explained by hot accretion‐autometamorphism, post‐metamorphic brecciation, or shock processing.     

What metal‐troilite textures can tell us about post‐impact metamorphism in chondrite meteorites

Abstract— Metal‐troilite textures are examined in metamorphosed and impact‐affected ordinary chondrites to examine the response of these phases to rapid changes in temperature. Complexly intergrown metal‐troilite textures are shown to form in response to three different impact‐related processes. (1) During impacts, immiscible melt emulsions form in response to spatially focused heating. (2) Immediately after impact events, re‐equilibration of heterogeneously distributed heat promotes metamorphism adjacent to zones of maximum impact heating. Where temperatures exceed ～850 ° C, this post‐impact metamorphism results in melting of conjoined metal‐troilite grains in chondrites that were previously equilibrated through radiogenic metamorphism. When the resulting Fe‐Ni‐S melt domains crystallize, a finely intergrown mixture of troilite and metal forms, which can be zoned with kamacite‐rich margins and taenite‐rich cores. (3) At lower temperatures, post‐impact metamorphism can also cause liberation of sulfur from troilite, which migrates into adjacent Fe‐Ni metal, allowing formation of troilite and occasionally copper within the metal during cooling. Because impact events cause heating within a small volume, post‐impact metamorphism is a short duration event (days to years) compared with radiogenic metamorphism (>10⁶ years). The fast kinetics of metal‐sulfide reactions allows widespread textural changes in conjoined metal‐troilite grains during post‐impact metamorphism, whereas the slow rate of silicate reactions causes these to be either unaffected or only partially annealed, except in the largest impact events. Utilizing this knowledge, information can be gleaned as to whether a given meteorite has suffered a post‐impact thermal overprint, and some constraints can be placed on the temperatures reached and duration of heating.     

The Hashima,Japan H4 chondrite: A newly reported meteorite

Abstract We report a new chondrite that fell in Hashima City in central Japan sometime during the period 1868–1912. The chondrite weighs 1110.64 g and exhibits distinct chondritic structure. Chondrules occupy 24 vol% of the stone and consist of olivine (average Fa_17,8), low-Ca pyroxene (average Fs_15,8 Wo_0.9), devitrified glass and lesser amounts of oligoclase (ca. Ab₈₀Or₄), kamacite, taenite, troilite and chromian spinel. Matrix occupying 76 vol% of the stone consists of olivine, low-Ca pyroxene, kamacite, taenite, troilite, cryptocrystalline minerals and lesser amounts of chromian spinel and chlorapatite. Matrix minerals have the same compositions as those in chondrules. Mineral chemistry, bulk chemistry and magnetic properties indicate that Hashima is an H-group chondrite. Well-defined chondrules, scarcely recrystallized oligoclase and relatively small variations of olivine and low-Ca pyroxene compositions indicate that Hashima is of petrologic type 4.