Critical evaluation of strong motion in Kocaeli and Düzce (Turkey) earthquakes

Turkey was struck by two major events on August 17th and November 12th, 1999. Named Kocaeli (M_w=7.4) and Düzce (M_w=7.2) earthquakes, respectively, the two earthquakes provided the most extensive strong ground motion data set ever recorded in Turkey. The strong motion stations operated by the General Directorate of Disaster Affairs, the Kandilli Observatory and Earthquake Research Institute of Bogazici University and Istanbul Technical University have produced at least 27 strong motion records for the Kocaeli earthquake within 200 km of the fault. Kocaeli earthquake has generated six motions within 20 km of the fault adding significantly to the near-field database of ground motions for M_w>=7.0 strike–slip earthquakes. The paper discusses available strong motion data, studies their attenuation characteristics, analyses time domain, as well as spectral properties such as spectral accelerations with special emphasis on fault normal and fault parallel components and the elastic attenuation parameter, kappa. A simulation of the Kocaeli earthquake using code FINSIM is also presented.     

Strong motion characteristics of the <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> 6.6 Lushan earthquake,Sichuan, China — an insight into the spatial difference of a typical thrust fault earthquake

Near-field strong ground motions are useful for engineering seismology studies and seismic design, but dense observation networks of damaging earthquakes are still rare. In this study, based on the strong-motion data from the M w 6.6 Lushan earthquake, the ground motion parameters in different spatial regions are systematically analyzed, and the contributions from different effects, like the hanging-wall effect, directivity effect, and attenuation effect are separated to the extent possible. Different engineering parameters from the observed ground motions are compared with the local design response spectra and a new attenuation relation of Western China. General results indicate that the high frequency ground motion, like the peak ground acceleration, on two sides of the fault plane is sensitive to the hanging-wall effect, whereas the low frequency ground motion, like the long period spectral acceleration, in the rupture propagation direction is affected by the directivity effect. Moreover, although the M w 6.6 Lushan earthquake is not a large magnitude event, the spatial difference of ground motion is still obvious; thus, for a thrust faulting earthquake, in addition to the hanging effect, the directivity effect should also be considered.     

近断层速度脉冲地震动的三维有限差分模拟

根据台湾西部地质地貌特征和1999年集集M_W7.6地震的研究成果,建立三维速度结构模型和震源模型,并采用三维有限差分法对双冬断层可能产生的近断层脉冲型地震动进行数值模拟。结果表明,方向性效应引起的双向速度脉冲集中在垂直于断层滑动分量的方向上,而滑冲效应引起的单向速度脉冲则集中在平行于断层滑动分量的方向上。受方向性效应和上盘效应的共同调制,近断层脉冲型地震动反映出不对称带状分布的特征,速度脉冲主要分布在距离断层面约10 km的范围内。凹凸体的特性影响着地震动的时空分布,由地震波场显示南投和台中处于强地震动危险区。近场脉冲型地震动的研究对分析速度脉冲形成机理以及地震危险性有一定的参考意义。     

DIRDOP: a directivity approach to determining the seismic rupture velocity vector

Directivity effects are a characteristic of seismic source finiteness and are a consequence of the rupture spread in preferential directions. These effects are manifested through seismic spectral deviations as a function of the observation location. The directivity by Doppler effect method permits estimation of the directions and rupture velocities, beginning from the duration of common pulses, which are identified in waveforms or relative source time functions. The general model of directivity that supports the method presented here is a Doppler analysis based on a kinematic source model of rupture (Haskell, Bull Seismol Soc Am 54:1811–1841, 1964) and a structural medium with spherical symmetry. To evaluate its performance, we subjected the method to a series of tests with synthetic data obtained from ten typical seismic ruptures. The experimental conditions studied correspond with scenarios of simple and complex, unilaterally and bilaterally extended ruptures with different mechanisms and datasets with different levels of azimuthal coverage. The obtained results generally agree with the expected values. We also present four real case studies, applying the method to the following earthquakes: Arequipa, Peru (M _w = 8.4, June 23, 2001); Denali, AK, USA (M _w = 7.8; November 3, 2002); Zemmouri–Boumerdes, Algeria (M _w = 6.8, May 21, 2003); and Sumatra, Indonesia (M _w = 9.3, December 26, 2004). The results obtained from the dataset of the four earthquakes agreed, in general, with the values presented by other authors using different methods and data.     

Modeling the strong ground motion and rupture characteristics of the March 31, 2006, Darb-e-Astane earthquake,Iran, using a hybrid of near-field SH-wave and empirical Green’s function method

We analyze the strong motion accelerograms of the moderate (M _w = 6.1), March 31, 2006, Darb-e-Astane earthquake of western Iran and also those of one of its prominently recorded, large (M _w = 5.1) foreshock and (M _w = 4.9) aftershock. (1) Using derived SH-wave spectral data, we first objectively estimate the parameters W _o\mathit{\Omega} _{\rm o} (long period spectral level), f _c (corner frequency) and Q(f) (frequency dependent, average shear wave quality factor), appropriate for the best-fit Brune ω ^− 2 spectrum of each of these three events. We then perform a non-linear least square analysis of the SH-wave spectral data to provide approximate near-field estimates of the strike, dip, and rake of the causative faults and also the seismic moment, moment magnitude, source size, and average stress drop of these three events. (2) In the next step, we use these approximate values and an empirical Green’s function approach, in an iterative manner, to optimally model the strong ground motion and rupture characteristics of the main event in terms of peak ground acceleration/velocity/displacement and duration of ground shaking and thereby provide improved, more reliable estimates of the causative fault parameters of the main event and its asperities. Our near-field estimates for both the main moderate event and the two smaller events are in good conformity with the corresponding far-field estimates reported by other studies.     

Validation of ground‐motion simulations for historical events using MDoF systems

The study presented in this paper addresses the issue of engineering validation of Graves and Pitarka's (2010) hybrid broadband ground motion simulation methodology with respect to some well‐recorded historical events and considering the response of multiple degrees of freedom (MDoF) systems. Herein, validation encompasses detailed assessment of how similar is, for a given event, the seismic response due to comparable hybrid broadband simulated records and real records. In the first part of this study, in order to investigate the dynamic response of a wide range of buildings, MDoF structures are modeled as elastic continuum systems consisting of a combination of a flexural cantilever beam coupled with a shear cantilever beam. A number of such continuum systems are selected including the following: (1) 16 oscillation periods between 0.1 and 6 s; (2) three shear to flexural deformation ratios to represent respectively shear‐wall structures, dual systems, and moment‐resisting frames; and (3) two stiffness distributions along the height of the systems, that is, uniform and linear. Demand spectra in terms of generalized maximum interstory drift ratio (IDR) and peak floor acceleration (PFA) are derived using simulations and actual recordings for four historical earthquakes, namely, the 1979 M_w 6.5 Imperial Valley earthquake, 1989 M_w 6.8 Loma Prieta earthquake, 1992 M_w 7.2 Landers earthquake, and 1994 M_w 6.7 Northridge earthquake. In the second part, for two nonlinear case study structures, the IDR and PFA distributions over the height and their statistics, are obtained and compared for both recorded and simulated time histories. These structures are steel moment frames designed for high seismic hazard, 20‐story high‐rise and 6‐story low‐rise buildings. The results from this study highlight the similarities and differences between simulated and real records in terms of median and intra‐event standard deviation of logs of seismic demands for MDoF building systems. This general agreement, in a broad range of moderate and long periods, may provide confidence in the use of the simulation methodology for engineering applications, whereas the discrepancies, statistically significant only at short periods, may help in addressing improvements in generation of synthetic records. Copyright © 2013 John Wiley & Sons, Ltd.     

Evidence for fault-related directionality and localized site effects from strong motion recordings of the 2003 Boumerdes (Algeria) earthquake: Consequences on damage distribution and the Algerian seismic code

The Algiers–Boumerdes region has been struck by a destructive magnitude 6.8 (M_w) earthquake on May 21, 2003. The study presented in this paper is based on main shock strong motions from 13 stations of the Algerian accelerograph network. A maximum 0.58g peak ground acceleration (PGA) has been recorded at 20 km from the epicenter, only about 150 m away from a PGA of 0.34g, with both a central frequency around 5 Hz, explained by a strong very localized site effect, confirmed by receiver function technique results showing peaks at 5 Hz with amplitudes changing by a factor of 2. Soil amplifications are also evidenced at stations located in the quaternary Mitidja basin, explaining the higher PGA values recorded at these stations than at stations located on firm soil at similar distances from the epicenter. A fault-related directionality effect observed on the strong motion records and confirmed by the study of the seismic movement anisotropy, in agreement with the N65 fault plan direction, explains the SW–NE orientation of the main damage zone. In the near field, strong motions present a high-frequency content starting at 3 Hz with a central frequency around 8 Hz, while in the far field their central frequency is around 3 Hz, explaining the high level of damage in the 3- to 4-story buildings in the epicentral zone. The design spectra overestimate the recorded mean response spectra, and its high corner frequency is less than the recorded one, leading to a re-examination of the seismic design code that should definitively integrate site-related coefficient, to account for the up to now neglected site amplification, as well as a re-modeling of the actual design spectra. Finally, both the proposed Algerian attenuation law and the worldwide laws usually used in Algeria underestimate the recorded accelerations of the 6.8 (M_w) Boumerdes earthquake, clearly showing that it is not possible to extrapolate the proposed Algerian law to major earthquakes.     

The role of alternating outcrops of sediments and basaltic lavas on seismic urban scenario: the study case of Catania, Italy

Experimental data and numerical modelling were used to study the effect of local geology on the seismic response of the Catania area. The town extends on a marly clays bedrock and terraced deposits made up by coastal sands and alluvial conglomerates. This sedimentary substratum is deeply entrenched by paleo-valleys filled by lava flows and pyroclastics. Available borehole data and elastic parameters were used to reconstruct a geotechnical model in order to perfome 1D numerical modeling. Seismic urban scenarios were simulated considering destructive (M _w = 7.0), strong (M _w = 6.2) and moderate (M _w = 5.7) earthquakes to assess the shaking level of the different outcropping formations. For each scenario seven real accelerograms were selected from the European Strong Motion Database to assess the expected seismic input at the bedrock. PGA and spectral acceleration at different periods were obtained in the urban area through the equivalent linear numerical code EERA, and contour maps of different levels of shaking were drawn. Standard and horizontal-to-vertical spectral ratios were achieved making use of a dataset of 172 seismic events recorded at ten sites located on the main outcropping lithotypes. Spectral ratios inferred from earthquake data were compared with theoretical transfer functions. Both experimental and numerical results confirm the role of the geological and morphologic setting of Catania. Amplification of seismic motion mainly occurs in three different stratigraphic conditions: (a) sedimentary deposits mainly diffused in the south of the study area; (b) spots of soft sediments surrounded by lava flows; (c) intensely fractured and scoriaceous basaltic lavas.     

Near‐fault ground motions,and the response of elastic and inelastic single‐degree‐of‐freedom (SDOF) systems

In order to investigate the response of structures to near‐fault seismic excitations, the ground motion input should be properly characterized and parameterized in terms of simple, yet accurate and reliable, mathematical models whose input parameters have a clear physical interpretation and scale, to the extent possible, with earthquake magnitude. Such a mathematical model for the representation of the coherent (long‐period) ground motion components has been proposed by the authors in a previous study and is being exploited in this article for the investigation of the elastic and inelastic response of the single‐degree‐of‐freedom (SDOF) system to near‐fault seismic excitations. A parametric analysis of the dynamic response of the SDOF system as a function of the input parameters of the mathematical model is performed to gain insight regarding the near‐fault ground motion characteristics that significantly affect the elastic and inelastic structural performance. A parameter of the mathematical representation of near‐fault motions, referred to as ‘pulse duration’ (T_P), emerges as a key parameter of the problem under investigation. Specifically, T_P is employed to normalize the elastic and inelastic response spectra of actual near‐fault strong ground motion records. Such normalization makes feasible the specification of design spectra and reduction factors appropriate for near‐fault ground motions. The ‘pulse duration’ (T_P) is related to an important parameter of the rupture process referred to as ‘rise time’ (τ) which is controlled by the dimension of the sub‐events that compose the mainshock. Copyright © 2004 John Wiley & Sons, Ltd.     

Coseismic deformation and slip distribution of the 1997 7.5 Manyi, Tibet, earthquake from InSAR measurements

We use interferometric synthetic aperture radar (InSAR) observations to investigate the coseismic deformation and slip distribution of the 1997 M_w7.5 Manyi earthquake, a left-lateral strike-slip earthquake occurred on the west portion of the Kunlun fault in the northern Tibet, China. The fault trace is constrained by the combination of interferometric coherence image and azimuth offset image. The total length of the identified fault is about 170 km. We estimate the source parameters using a seven-segment fault model in a homogeneous elastic half-space. We first use a uniform slip model to estimate the slip, width, dip and rake for each segment, resulting in a maximum slip of 5.5 m with a depth of 11 km on the fourth segment. The average dip of the uniform slip model is about 93° northward and the average rake is about −2°. We then use a distributed slip model to estimate the pure strike-slip and oblique slip distribution, respectively. In the distributed slip model, the fault plane is discretized into 225 patches, each of them 4 km × 4 km. We fix the optimal geometric parameters and solve for the slip distribution using a bounded variable least-squares (BVLS) method. We find a geodetic moment of 1.91 × 10²⁰ Nm (M_w7.5), of which almost 68% released in the uppermost 8 km and 82% in the uppermost 12 km. For all the models used in this study, the synthetic profiles along strike show asymmetric displacements on the opposite sides of the fault, which are in agreement with the observations. This suggests that a linear elastic model with variable and non-vertical dips is also reasonable for the mechanism of the Manyi earthquake.     

A note on the M w 6.3 earthquake in Iceland on 29 May 2008 at 15:45 UTC

This preliminary study aims to investigate a M _w 6.3 earthquake that occurred in South Iceland on Thursday 29 May 2008 at 15:45 UTC. The epicentre was in the Olfus District between the towns of Selfoss and Hveragerdi. This study examines the data recorded and the damage observed immediately after the event. Horizontal accelerations of up to 80%g were recorded in the epicentral region and there is visual evidence that the vertical acceleration exceeded 1 g. The PGA data is compared to a ground motion estimation model developed for the South Iceland earthquakes in June 2000. In general the basic properties of this event are found to be similar to the characteristics of the South Iceland earthquakes in June 2000. The duration of strong-motion is short and the intensity attenuates rapidly with increasing distance. The earthquake action resisted by buildings in the near fault area is inspected through evaluation of elastic as well as inelastic response spectra. The vast majority of structures seemed to withstand the strong-motion fairly competently and without significant visual damage due firstly to the low-rise, predominantly reinforced concrete or timber, style of buildings. Secondly, the short duration of strong-motion contributed to the endurance of structures.     

Rupture behavior and deformation localization of the Kunlunshan earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript>7.8) and their tectonic implications

Earthquake surface rupture is the result of transformation from crustal elastic strain accumulation to permanent tectonic deformation. The surface rupture zone produced by the 2001 Kunlunshan earthquake (M _w 7.8) on the Kusaihu segment of the Kunlun fault extends over 426 km. It consists of three relatively independent surface rupture sections: the western strike-slip section, the middle transtensional section and the eastern strike-slip section. Hence this implies that the Kunlunshan earthquake is composed of three earthquake rupturing events, i.e. the M _w =6.8, M _w =6.2 and M _w ⩽=7.8 events, respectively. The M _w =7.8 earthquake, along the eastern section, is the main shock of the Kunlunshan earthquake, further decomposed into four rupturing subevents. Field measurements indicate that the width of a single surface break on different sections ranges from several meters to 15 m, with a maximum value of less than 30 m. The width of the surface rupture zone that consists of en echelon breaks depends on its geometric structures, especially the stepover width of the secondary surface rupture zones in en echelon, displaying a basic feature of deformation localization. Consistency between the Quaternary geologic slip rate, the GPS-monitored strain rate and the localization of the surface ruptures of the 2001 Kunlunshan earthquake may indicate that the tectonic deformation between the Bayan Har block and Qilian-Qaidam block in the northern Tibetan Plateau is characterized by strike-slip faulting along the limited width of the Kunlun fault, while the blocks themselves on both sides of the Kunlun fault are characterized by block motion. The localization of earthquake surface rupture zone is of great significance to determine the width of the fault-surface-rupture hazard zone, along which direct destruction will be caused by co-seismic surface rupturing along a strike-slip fault, that should be considered before the major engineering project, residental buildings and life line construction. Supported by the National Natural Science Foundation of China (Grant No. 40474037) and the National Basic Research Program of China (Grant No. 2004CB418401)     

Characteristics of earthquake ground motions and the H/V of microtremors in the southwestern part of Taiwan

The relationships between the spectral characteristics of earthquake ground motions and those of micro‐tremors are investigated using the observed data from a dense strong‐motion network consisting of 108 stations in the Yun‐Li, Chia‐Yi and Tai‐Nan areas in southwestern Taiwan. Many high‐quality recordings, including those of the 921 Chi‐Chi earthquake (M_w=7.6), the 1022 Chia‐Yi mainshock (M_L=6.4), the 1022 major aftershock (M_L=6.0), as well as some weak motion events are selected to evaluate site responses. Microtremor measurements are also performed at most ground motion stations. With many stations in the area located on an alluvium structure, however, it is difficult to find good reference stations on rock sites, which therefore necessitates the calculation of single‐station H/V ratios. The predominant frequencies obtained from H/V ratios are consistent with those from spectral ratios. The site characteristics between the strong and weak events are different, however. This implies that a nonlinear effect probably occurred with the strong‐motion events. The main peak in the H/V spectra of the microtremors is in good agreement with the first peak obtained from the spectra of earthquake ground motions. It is reasonable to claim that the main peak reflects the deep underground structure. On the basis of the H/V ratios of the microtremors, it is concluded that the lower predominant frequencies appear in the plain area, while the higher values are near the mountainous region. Copyright © 2002 John Wiley & Sons, Ltd.     

Earthquake ground motion predictive equations for Garhwal Himalaya,India

Predictive equations based on the stochastic approach are developed for earthquake ground motions from Garhwal Himalayan earthquakes of 3.5≤M_w≤6.8 at a distance of 10≤R≤250 km. The predicted ground motion parameters are response spectral values at frequencies from 0.25 to 20 Hz, and peak ground acceleration (PGA). The ground motion prediction equations (GMPEs) are derived from an empirically based stochastic ground motion model. The GMPEs show a fair agreement with the empirically developed ground motion equations from Himalaya as well as the NGA equation. The proposed relations also reasonably predict the observed ground motion of two major Himalayan earthquakes from Garhwal Himalayan region. For high magnitudes, there is insufficient data to satisfactorily judge the relationship; however it reasonably predicts the 1991 Uttarkashi earthquake (M_w=6.8) and 1999 Chamoli earthquake (M_w=6.4) from Garhwal Himalaya region.     

Evidence for a Tang-Song Dynasty great earthquake along the Longmen Shan Thrust Belt prior to the 2008 <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> 7.9 Wenchuan earthquake,China

The magnitude (M _w) 7.9 Wenchuan earthquake occurred on 12 May 2008 in the Longmen Shan region of China, the transition zone between the Tibetan Plateau and the Sichuan Basin, resulting in widespread damage throughout central and western China. The steep, high-relief eastern margin of the Tibetan Plateau has undergone rapid Cenozoic uplift and denudation accompanied by folding and thrusting, yet no large thrust earthquakes are known prior to the 2008 M _w 7.9 Wenchuan earthquake. Field and excavation investigations reveal that a great historical earthquake occurred in the Sichuan region that ruptured a >200-km-long thrust fault within the Longmen Shan Thrust Belt, China, which also triggered the 2008 M _w 7.9 Wenchuan earthquake. The average co-seismic slip amount produced by this historical earthquake is estimated to be 2–3 m, comparable with that caused by the 2008 Wenchuan earthquake. Paleoseismic and archaeological evidence and radiocarbon dating results show that the penultimate great earthquake occurred in the Sichuan region during the late Tang-Song Dynasty, between AD 800 and 1000, suggesting a recurrence interval of ~1,000–1,200 years for Wenchuan-magnitude (M = ~8) earthquakes in the late Holocene within the Longmen Shan Thrust Belt. This finding is in contrast with previous estimates of 2,000–10,000 years for the recurrence interval of large earthquakes within the Longmen Shan Thrust Belt, as obtained from long-term slip rates based on the Global Positioning System and geological data, thereby necessitating substantial modifications to existing seismic-hazard models for the densely populated region at the eastern marginal zone of the Tibetan Plateau.     

Reconnaissance report and preliminary ground motion simulation of the 12 May 2008 Wenchuan earthquake

The M _w = 8.0 Wenchuan earthquake of May 12, 2008, caused destruction over a wide area. The earthquake cost more than 69,000 lives and the damage is reported to have left more than 5 million people homeless. It is estimated that 5.36 million buildings were destroyed and 21 million buildings were damaged in Sichuan and the nearby provinces. Economic losses due to the event are estimated to be 124 billion USD. From a field reconnaissance trip conducted in October 2008, it is evident that the combination of several factors, including mountainous landscape, strong ground shaking, extensive landslides and rock-falls, has exacerbated the human and economic consequences of this earthquake. Extensive damage occurred over a wide area due to the shear size of the earthquake rupture combined with poor quality building construction. In order to investigate the ground shaking during the earthquake, we have conducted a strong ground motion simulation study, applying a hybrid broadband frequency technique. The preliminary results show large spatial variation in the ground shaking, with the strongest ground motions along the fault plane. The simulation results have been calibrated against the recorded ground motion from several near-field stations in the area, and acceleration values of the order of 1 g are obtained, similar to what was recorded during the event. Comparison with the damage distribution observed in the field confirms that the effect of fault rupture complexity on the resulting ground motion distribution also controls to a large extent the damage distribution. The applied simulation technique provides a promising platform for predictive studies.     

Probabilistic aftershock hazard assessment II: application of strong ground motion simulations

Probabilistic aftershock hazard assessment (PAHA) has been introduced by Wiemer (Geophys Res Lett 27:3405–3408, 2000). The method, in its original form, utilizes attenuation relations in evaluating peak ground velocity (PGV) exceedence probability. We substitute the attenuation relations together with their uncertainties by strong ground motion simulations for a set of scenarios. The main advantage of such an approach is that the simulations account for specific details of the aftershock source effects (faulting style, slip distribution, position of the nucleation point, etc.). Mean PGVs and their standard deviations are retrieved from the simulation results obtained by the new hybrid k-squared source model, and they are used for the PAHA analysis at a station under study. The model chosen for the testing purposes is inspired by the Izmit A25 aftershock (M _w  = 5.8) that occurred 26 days after the mainshock. The PAHA maps are compared with (1) those obtained by the use of attenuation relations and (2) the peak values of ten selected strong-motion recordings written by the aftershock at epicentral distances <50 km. We conclude that, although the overall hazard decay with increasing fault distance is similar, the PAHA maps obtained by the use of simulations exhibit remanent radiation pattern effect and prolongation in the strike direction due to the directivity effect pronounced for some of the scenarios. As regard the comparison with real data, we conclude that the PAHA maps agree with observed peak values due to appropriate attenuation model adopted in the analysis.     

Empirical attenuation relationship for Arias Intensity

Arias Intensity is a ground motion parameter that captures the potential destructiveness of an earthquake as the integral of the square of the acceleration–time history. It correlates well with several commonly used demand measures of structural performance, liquefaction, and seismic slope stability. A new empirical relationship is developed to estimate Arias Intensity as a function of magnitude, distance, fault mechanism, and site category based on 1208 recorded ground motion data from 75 earthquakes in active plate‐margins. Its functional form is derived from the point‐source model, and the coefficients are determined through non‐linear regression analyses using a random‐effects model. The results show that for large magnitude earthquakes (M > 7) Arias Intensity was significantly overestimated by previous relationships while it was underestimated for smaller magnitude events (M ? 6). The average horizontal Arias Intensity is not significantly affected by forward rupture directivity in the near‐fault region. The aleatory variability associated with Arias Intensity is larger than that of most other ground motion parameters such as spectral acceleration. However, it may be useful in assessing the potential seismic performance of stiff engineering systems whose response is dominated by the short‐period characteristics of ground motions. Copyright © 2003 John Wiley & Sons, Ltd.     

The instability of the <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> and <Emphasis Type="Italic">M</Emphasis><Subscript>L</Subscript> comparison for earthquakes in Greece for the period 1969 to 2007

We use 576 earthquakes of magnitude, M _w, 3.3 to 6.8 that occurred within the region 33° N–42.5° N, 19° E–30° E in the time period 1969 to 2007 to investigate the stability of the relation between moment magnitude, M _w, and local magnitude, M _L, for earthquakes in Greece and the surrounding regions. We compare M _w to M _L as reported in the monthly bulletins of the National Observatory of Athens (NOA) and to M _L as reported in the bulletins of the Seismological Station of the Aristotle University of Thessaloniki. All earthquakes have been analyzed through regional or teleseismic waveform inversion, to obtain M _w, and have measured maximum trace amplitudes on the Wood–Anderson seismograph in Athens, which has been in operation since 1964. We show that the Athens Wood–Anderson seismograph performance has changed through time, affecting the computed by NOA M _L by at least 0.1 magnitude units. Specifically, since the beginning of 1996, its east–west component has been recording systematically much larger amplitudes compared to the north–south component. From the comparison between M _w and M _L reported by Thessaloniki, we also show that the performance of the sensors has changed several times through time, affecting the calculated M _L’s. We propose scaling relations to convert the M _L values reported from the two centers to M _w. The procedures followed here can be applied to other regions as well to examine the stability of magnitude calculations through time.     

Source characteristics of the deep Philippine earthquake cluster, 23 and 24 July 2010

We determine the rupture velocity, rupture area, stress drop and duration of four strong deep-focus earthquakes in the Philippines by back-projecting the teleseismic P waves. Four deep-focus earthquakes occurred in a totally consumed Molucca microplate; their focal depths were greater than 550 km and their moment magnitudes were between M _w 6.6 and M _w 7.6. By studying this deep-focus cluster, we are able to estimate the rupture velocity, rupture area and stress drop which would assist in constraining the physical mechanism for earthquakes deeper than 500 km. Since the Molucca microplate is totally consumed, little evidence is left on the surface for us to do research. This deep-focus cluster provides us the opportunity to reveal the properties of this totally consumed microplate by using seismic method for the first time. Four earthquakes in this deep-focus cluster all have multiple rupture subevents. The M _w 7.3 event ruptures in two subevents, the M _w 7.6 and M _w 7.4 events both have three subevents. The M _w 6.6 event has single peak on the amplitude as a function of time; however, its energy releases at two spatially separated areas. Our results show that this deep-focus cluster has a slow rupture velocity which is about 0.27 to 0.43 of the shear wave velocity, long-scaled duration, concentrated energy release area, and high stress drop. These source properties are similar to those of other deep earthquakes occurring in warm slabs and indicate that the totally consumed Molucca microplate possibly is a warm plate.