赣南樟东坑钨矿两类矿化中辉钼矿的Re-Os同位素定年及其地质意义

赣南樟东坑钨矿具有典型的"上脉(黑钨矿石英脉)下体(蚀变细粒花岗岩)"和"上钨下钼"矿化模式, 为了弄清黑钨矿石英脉与蚀变细粒岩体型矿化之间在成矿时间上的关系, 对产于该矿细粒花岗岩中的辉钼矿和石英脉中的辉钼矿分别进行了Re-Os同位素定年. 测试结果为: 细粒花岗岩中的3件辉钼矿样品Re-Os等时线年龄为155.4±2.1 Ma(MSWD=1.12), 模式年龄154.9±2.6 Ma~156.5 ± 2.6 Ma, 加权平均年龄155.5±1.4 Ma(MSWD=0.44);而石英脉中5件辉钼矿样品的Re-Os等时线年龄为154.6±1.7 Ma(MSWD=0.030), 模式年龄变化范围为154.2±2.3 Ma~154.7±2.7 Ma, 加权平均年龄为154.29±0.98 Ma(MSWD=0.045). 上述结果表明, 花岗岩体型矿化与石英脉型矿化的年龄在误差范围内高度一致, 从而证明了岩体中的钼钨矿化与石英脉中的钨钼矿化为同一次岩浆热液矿化事件的产物.      

赣南樟东坑钨矿两类矿化中辉钼矿的Re-Os同位素定年及其地质意义

赣南樟东坑钨矿具有典型的"上脉(黑钨矿石英脉)下体(蚀变细粒花岗岩)"和"上钨下钼"矿化模式,为了弄清黑钨矿石英脉与蚀变细粒岩体型矿化之间在成矿时间上的关系,对产于该矿细粒花岗岩中的辉钼矿和石英脉中的辉钼矿分别进行了Re-Os同位素定年.测试结果为:细粒花岗岩中的3件辉钼矿样品Re-Os等时线年龄为155.4±2.1Ma(MSWD=1.12),模式年龄154.9±2.6Ma~156.5±2.6Ma,加权平均年龄155.5±1.4Ma(MSWD=0.44);而石英脉中5件辉钼矿样品的Re-Os等时线年龄为154.6±1.7Ma(MSWD=0.030),模式年龄变化范围为154.2±2.3Ma~154.7±2.7Ma,加权平均年龄为154.29±0.98Ma(MSWD=0.045).上述结果表明,花岗岩体型矿化与石英脉型矿化的年龄在误差范围内高度一致,从而证明了岩体中的钼钨矿化与石英脉中的钨钼矿化为同一次岩浆热液矿化事件的产物.     

辽宁后仙峪硼矿床氩-氩定年及其地质意义

辽吉硼矿带是世界级非金属成矿省,但其成矿时代研究薄弱,成因类型和构造环境认识分歧.本文报道新获得的后仙峪超大型硼镁矿床金云母~(40)Ar-~(39)Ar年龄,并厘定成矿时代.主矿体金云母氩-氩坪年龄为884.4±8.9Ma(MSWD=0.47),正、反等时线年龄分别为885.0±7.5 Ma(MSWD=0.55)和885.8±7.3 Ma(MSWD=0.79),表明主成矿事件发生在885Ma左右,可能与Rodinia超大陆汇聚事件有关.矿体与闪长岩脉接触带蚀变岩的金云母氩-氩坪年龄为386.5±3.9Ma(MSWD=1.4),正、反等时线年龄分别为386.7±5.3 Ma(MSWD=2.6)和387.1±7.2 Ma(MSWD=3.9),代表成矿后局部改造事件的年龄,后期改造与早泥盆世岩浆作用有关.     

广西都庞岭李贵福钨锡多金属矿Re-Os同位素定年研究

李贵福钨锡多金属矿赋存于都庞岭复式花岗岩体东部。矿床类型主要为云英岩-石英脉型。通过对矿石中辉钼矿Re-Os同位素测年,获得等时线年龄为(211.9±6.4)Ma(n=7,MSWD=4.1),模式年龄的加权平均值为(213.3±2.9)Ma(MSWD=4.0)。结果显示成矿作用发生在印支期,表明都庞岭地区存在早中生代钨锡多金属成矿事件。     

内蒙古东部得耳布尔铅锌矿床安山岩的形成环境和岩浆热液演化史:锆石U-Pb定年

得耳布尔铅锌矿床是一座与火山作用有关的中型以上热液脉型多金属矿床,产于大兴安岭西坡中段得尔布干成矿带北段。笔者对矿区内发育的赋矿围岩安山岩开展了单颗粒锆石U-Pb测年,实验结果揭示:安山岩的岩浆期为144~139 Ma(加权平均年龄为141.6±1.8 Ma,MSWD=0.69,n=6)、岩浆热液期为136~132 Ma(加权平均年龄为134.7±5.7 Ma,MSWD=1.3,n=3)及热液期为129~128 Ma(加权平均年龄为128.4±2.5 Ma,MSWD=0.074,n=3),火山岩浆-热液作用经历了至少13 Ma;成岩作用发生在中国东部早白垩世岩石圈减薄期。     

内蒙古半拉山钼矿LA-ICP-MS锆石U-Pb与辉钼矿Re-Os年龄及其成矿动力学背景

内蒙古阿鲁科尔沁旗半拉山钼矿床位于大兴安岭南段,是新发现的中型爆破角砾岩型钼矿床.半拉山钼矿区内流纹岩围岩和花岗斑岩岩脉的LA-ICP-MS锆石U-Pb年龄分别是(157.5±3.3)Ma和(126.3±2.1)Ma,而辉钼矿样品的Re-Os同位素等时线年龄为(136.1±6.6)Ma(MSWD=0.42),表明成矿作...     

内蒙古兴和县曹四夭超大型斑岩钼铅锌金成矿系统年代学及其地质意义

曹四夭斑岩钼矿床位于内蒙古兴和县,是华北克拉通北缘最大的钼矿床。该矿床中部发育斑岩型钼矿体,外围和上部产出热液脉型铅锌金矿体。文章选取1件与斑岩钼矿化共生的绢云母样品进行了40Ar-39Ar定年,获得40Ar-39Ar坪年龄为(144.4±1.2)Ma,相应的39Ar/36Ar-40Ar/39Ar等时线年龄为(146.4±2.2)Ma(MSWD=0.31),将等时线年龄认作绢云母的Ar封闭年龄,表明曹四夭斑岩钼矿化发生在约146 Ma前。选取14件脉型铅锌矿石中的闪锌矿、黄铁矿和磁黄铁矿样品开展了Rb-Sr定年,获得4件闪锌矿的Rb-Sr等时线年龄为(145.1±3.0)Ma(MSWD=0.63);5件黄铁矿的Rb-Sr等时线年龄为(145.2±1.3)Ma(MSWD=0.53);4件闪锌矿、5件黄铁矿和1件磁黄铁矿的Rb-Sr等时线年龄为(145.3±1.0)Ma(MSWD=0.43)。硫化物Rb-Sr定年结果表明曹四夭矿床脉型铅锌矿化形成于约145 Ma前。本次绢云母40Ar-39Ar和硫化物Rb-Sr定年结果表明,曹四夭矿床斑岩型钼矿化和脉型铅锌金矿化为同期产物,两者均形成于晚侏罗世末期,属于同一个斑岩成矿系统。曹四夭矿床硫化物的w(Rb)和w(Sr)分别为0.1867×10~(-6)~1.305×10~(-6)和0.3175×10~(-6)~6.935×10~(-6),Sr同位素初始比值(87Sr/86Sr)i介于0.709 919~0.711 951之间,平均值0.710 952,结合前人获得的辉钼矿Re含量,认为曹四夭矿床的成矿物质主要来源于地壳。     

延边东部五道沟岩群的单颗粒锆石SHRIMP U-Pb 年代学及其地质意义

通过对延边地区东部五道沟岩群黑云阳起石片岩的单颗粒锆石SHRIMP U-Pb年龄测定.获得21个单点年龄,其中包括7组谐和年龄和1组不谐和年龄.谐和年龄分别为1347.8 Ma、844.8 Ma、340.2～313.7 Ma(平均值为323±23 Ma,N=4,MSWD=0.23,置信度=0.88)、292.9～288.3 Ma(平均值=291±25 Ma,N=3,MSWD=0.031.置信度=0.86)、279.2～266.2 Ma(平均值为279±28 Ma,N=4,MSWD=0.031,置信度=0.86)、127.4～124.2 Ma(206Pb/208U年龄平均值为126.5±3.7 Ma,N=5,MSWD=0.12;置信度=O.97)、116.1～106.3 Ma(平均值为115±39 Ma,N=2,MSWD=1.2置信度=0.27),不谐和年龄的下交点年龄为(451±120)Ma、上交点年龄为(1811±400)Ma(MSWD=7.2);这一结果表明:阳起石片岩的原岩主要是来自中元古代、新元古代和早古生代的碎屑物,指示五道沟群的沉积成岩作用发生在石炭世(323±23 Ma),变质作用发生在晚二叠世(291±25 Ma),之后在279.2～266.2 Ma、126.5～106.3 Ma先后受两次岩浆用和蚀变作用的改造.     

内蒙古道伦达坝铜钨锡矿床LA-ICP-MS锆石和锡石U-Pb年龄及其地质意义

道伦达坝矿床位于大兴安岭南段,是一个铜钨锡矿床,其铜、钨、锡储量均达中型。矿体呈脉状,主要产于二叠系砂板岩中的断裂破碎带中,华力西期黑云母花岗岩中的断裂破碎带中亦赋存有矿体。文章选取2件石英-萤石-白云母-电气石-锡石-黑钨矿阶段的矿石样品对其中的进行了LA-ICP-MS U-Pb定年,获得2件样品的~(207)Pb/~(206)Pb-~(238)U/~(206)Pb谐和年龄分别为(134.7±6.6)Ma(MSWD=1.4)和(136.8±7.4)Ma(MSWD=1.7),~(206)Pb/~(207)Pb-~(238)U/~(207)Pb等时线年龄分别为(132±12)Ma(MSWD=0.76)和(135±13)Ma(MSWD=0.9)。锡石定年结果表明,道伦达坝矿床形成于早白垩世。对矿区外围张家营子岩体中的斑状细粒花岗岩进行了LA-ICP-MS锆石U-Pb测年,获得的~(206)Pb/~(238)U加权平均年龄为(135±1)Ma(MSWD=1.3),该岩体的形成年龄与道伦达坝矿床的成矿年龄在误差范围内一致。本次定年结果表明道伦达坝矿床形成于早白垩世,与同期的花岗质岩浆活动有密切的成因联系,该矿床属于与花岗岩有关的岩浆热液脉型矿床。     

西藏斯弄多铅锌矿床成矿岩体LA-ICP-MS锆石U-Pb年龄及地质意义

斯弄多铅锌矿床位于南冈底斯-念青唐古拉成矿带北缘铅锌银多金属矿带上,该矿床铅锌矿化与矿区花岗斑岩密切相关,为典型的热液脉型-矽卡岩型铅锌矿床。为厘定其成岩成矿时代,本文对矿区花岗斑岩进行了锆石LA-ICP-MS U-Pb年龄测定。结果得到2组年龄,一组年龄介于(75.1±1.8)～(77.7±1.8)Ma之间,加权平均年龄为(75.7±0.9)Ma(MSWD=0.27,n=11),可能反映岩浆在岩浆房演化过程中结晶的锆石年龄;另一组年龄为(67.5±1.4)～(69.4±1.4)Ma,加权平均年龄为(68.8±1.2)Ma(MSWD=0.31,n=6),代表花岗斑岩真实的结晶年龄,这一花岗斑岩的年龄(68.8±1.2)Ma明显早于冈底斯带内主碰撞期形成的矽卡岩型矿床。结合该成矿带其他矿床的成岩、成矿年龄,本文认为南冈底斯-念青唐古拉成矿带在印-亚大陆碰撞早期或新特提斯洋壳俯冲晚期,也伴有较强的铅锌多金属成矿作用。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。