The geology of the Oceanographer Transform: The ridge-transform intersection

Seven dives in the submersible ALVIN and four deep-towed (ANGUS) camera lowerings have been made at the eastern ridge-transform intersection of the Oceanographer Transform with the axis of the Mid-Atlantic Ridge. These data constrain our understanding of the processes that create and shape the distinctive morphology that is characteristic of slowly-slipping ridge-transform-ridge plate boundaries. Although the geological relationships observed in the rift valley floor in the study area are similar to those reported for the FAMOUS area, we observe a distinct change in the character of the rift valley floor with increasing proximity to the transform. Over a distance of approximately ten kilometers the volcanic constructional terrain becomes increasingly more disrupted by faulting and degraded by mass wasting. Moreover, proximal to the transform boundary, faults with orientations oblique to the trend of the rift valley are recognized. The morphology of the eastern rift valley wall is characterized by inward-facing scarps that are ridge-axis parallel, but the western rift valley wall, adjacent to the active transform zone, is characterized by a complex fault pattern defined by faults exhibiting a wide range of orientations. However, even for transform parallel faults no evidence for strike-slip displacement is observed throughout the study area and evidence for normal (dip-slip) displacement is ubiquitous. Basalts, semi-consolidated sediments (chalks, debris slide deposits) and serpentinized ultramafic rocks are recovered from localities within or proximal to the rift valley. The axis of accretion-principal transform displacement zone intersection is not clearly established, but appears to be located along the E-W trending, southern flank of the deep nodal basin that defines the intersection of the transform valley with the rift floor.     

The geology of the Oceanographer Transform: The transform domain

Three dives in submersible ALVIN and four deep-towed camera lowerings have been made along the transform valley of the Oceanographer Transform. These data constrain our understanding of the processes that create and shape the distinctive morphology that is characteristic of slowly slipping ridge-transform-ridge (RTR) plate boundaries. Our data suggest that the locus of strike-slip tectonism, called the transform fault zone (TFZ), is confined to a narrow swath (<4 km) that is centered along the axis of maximum depth. The TFZ is flanked by the inward facing slopes of the transform valley. The lower portions of the valley walls are characterized by broad sloping exposures of undisrupted sediment but at higher elevations the walls are made up of inward facing scarps and terraces of variable dimensions. Although the scarps have been badly degraded by mass wasting, there is no evidence to suggest that these scarps have accommodated significant amounts of strike-slip motion. Plutonic and ultramafic rocks are exposed on these scarps and the occurrence of this diverse assemblage on small-throw faults indicates that the crust is thin and/or discontinuous in this environment. We suggest that this complex igneous assemblage is the product of anomalous accretionary processes that are characteristic of slowly-slipping RTR plate boundaries.     

Deep tow studies of the Tamayo transform fault

The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series.     

Active fragmentation of the North America plate at the Mexican triple junction area off Manzanillo

The identification of 1) the exact location of the East Pacific Rise (EPR)-Rivera Fracture Zone (RFZ) eastern junction, 165 km west of the Acapulco Trench axis, 2) the absence of a clear Rivera-Cocos Plate boundary between the Acapulco Trench axis and the EPR-RFZ eastern junction and, 3) the Jalisco Block (JB) offshore boundary that connects the Colima Graben (CG) to the Tamayo Fracture Zone (TFZ) northward suggests that the Jalisco Block is being transferred from the North America Plate to the Pacific Plate north, rather than south, of the Tamayo Fracture Zone.     

Tectonics of ridge-transform intersections at the Kane fracture zone

The Kane Transform offsets spreading-center segments of the Mid-Atlantic Ridge by about 150 km at 24° N latitude. In terms of its first-order morphological, geological, and geophysical characteristics it appears to be typical of long-offset (>100 km), slow-slipping (2 cm yr^-1) ridge-ridge transform faults. High-resolution geological observations were made from deep-towed ANGUS photographs and the manned submersible ALVIN at the ridge-transform intersections and indicate similar relationships in these two regions. These data indicate that over a distance of about 20 km as the spreading axes approach the fracture zone, the two flanks of each ridge axis behave in very different ways. Along the flanks that intersect the active transform zone the rift valley floor deepens and the surface expression of volcanism becomes increasingly narrow and eventually absent at the intersection where only a sediment-covered ‘nodal basin’ exists. The adjacent median valley walls have structural trends that are oblique to both the ridge and the transform and have as much as 4 km of relief. These are tectonically active regions that have only a thin (<200 m), highly fractured, and discontinuous carapace of volcanic rocks overlying a variably deformed and metamorphosed assemblage of gabbroic rocks. Overprinting relationships reveal a complex history of crustal extension and rapid vertical uplift. In contrast, the opposing flanks of the ridge axes, that intersect the non-transform zones appear to be similar in many respects to those examined elsewhere along slow-spreading ridges. In general, a near-axial horst and graben terrain floored by relatively young volcanics passes laterally into median valley walls with a simple block-faulted character where only volcanic rocks have been found. Along strike toward the fracture zone, the youngest volcanics form linear constructional volcanic ridges that transect the entire width of the fracture zone valley. These volcanics are continuous with the older-looking, slightly faulted volcanic terrain that floors the non-transform fracture zone valleys. These observations document the asymmetric nature of seafloor spreading near ridge-transform intersections. An important implication is that the crust and lithosphere across different portions of the fracture zone will have different geological characteristics. Across the active transform zone two lithosphere plate edges formed at ridge-transform corners are faulted against one another. In the non-transform zones a relatively younger section of lithosphere that formed at a ridge-non-transform corner is welded to an older, deformed section that initially formed at a ridge-transform corner.     

The western intersection of Oceanographer fracture zone with the mid-Atlantic ridge

A survey across the western intersection of the mid-Atlantic ridge with Oceanographer fracture zone near 35°N shows this intersection to be different in character from its more typical eastern counterpart. At the western junction the transform valley broadens into a parallelogram shaped deep some 46 by 24 km, which extends well across the trace of the active transform. Within 30 km south of the fracture zone the median valley becomes oblique forming a NE trending ridge which is the SE edge of the deep. Magnetic mapping shows the current spreading centre to be adjacent to this ridge.A sequence of evolution for this intersection over the past 0.7 Ma is proposed to explain the features mapped. We suggest that the oblique ridge crest trends extended across the transform trace to form the elongated graben-like deep with its associated faults and sediment slumps. Such complex patterns may occur as plate-wide changes in spreading direction become modified by localised shear stress fields at ridge crest-transform intersections, as have been observed in a number of other cases. The absence of significant tranverse ridges across from the spreading centre at this particular fracture zone intersection, may have temporarily allowed these stress patterns to propagate across the fracture zone.     

First manned submersible dives on the East Pacific Rise at 21°N (project RITA): General results

A submersible study has been conducted in February–March 1978 at the axis of the East Pacific Rise near 21°N. The expedition CYAMEX, the first submersible program to be conducted on the East Pacific Rise, is part of the French-American-Mexican project RITA (Rivera-Tamayo), a 3-year study devoted to detailed geological and geophysical investigations of the East Pacific Rise Crest. On the basis of the 15 dives made by CYANA in the axial area of the Rise, a morphological and tectonic zonation can be established for this moderately-fast spreading center. A narrow, 0.6 to 1.2 km wide zone of extrusion (zone 1), dominated by young lava flows, is flanked by a highly fissured and faulted zone of extension (zone 2) with a width of 1 to 2 km. Further out, zone 3 is dominated by outward tilted blocks bounded by inward-facing fault scarps. Active or recent faults extend up to 12 km from the axis of extrusion of the East Pacific Rise. This represents the first determination from direct field evidence of the width of active tectonism associated with an accreting plate boundary. Massive sulfide deposits, made principally of zinc, copper and iron, were found close to the axis of the Rise. Other signs of the intense hydrothermal activity included the discovery of benthic fauna of gian size similar to that found at the axis of the Galapagos Rift. We emphasize the cyclic character of the volcanicity. The main characteristics of the geology of this segment of the East Pacific Rise can be explained by the thermal structure at depth below this moderately-fast spreading center. The geological observations are compatible with the existence of a shallow magma reservoir centered at the axis of the Rise with a half-width of the order of 10 km.     

A geological transect across the crest of the East Pacific Rise at 21°N latitude made from the deep submersible ALVIN

This paper is a report of geological observations made using the submersible ALVIN on the crest of the East Pacific Rise near 21°N. The profile is 6 km long and crosses a 5–10 km wide plateau which rises 100 m±above the rise flanks. At the axis are exposed fresh glassy pillow lavas with no sediment accumulation in a region termed the neovolcanic zone. This zone is about one kilometer wide and includes elongate ridges of pillow lavas and seventeen hydrothermal vent fields in the study area. Outside the neovolcanic zone the seafloor is extensively fissured in another zone which is up to two kilometers wide. The neovolcanic zone and the fissured zone are included within a rift valley or graben about 3 to 5 km wide and 50 m±deep. This rift valley is asymmetrically located on the west side of the axial plateau; the neovolcanic zone in the study area is asymmetrically located on the east side of the rift graben. Fissured crust is not common outside the rift graben or in the neovolcanic zone; similarly, large throw faults such as those which form the edges of the graben are not found outside of it. These observations can be interpreted according to a volcanic-tectonic cycle in which volcanic eruptions and hydrothermal circulation are followed by a tectonic phase which includes fissuring and vertical movements. When a new cycle starts it may involve a lateral shift of the spreading axis. Lavas along the dive profile are suggested to be no older than a few thousand years based on sediment accumulation. In contrast, seafloor spreading rates here predict crust up to 10⁵ yr old. This observation suggests that lavas from the neovolcanic zone can spread laterally about a kilometer or more and overlap on older crust.     

Variations in axial processes on the Mid-Atlantic Ridge: The median valley of the MARK area

Submersible observations and photogeology document dramatic variations in the distribution of young volcanic rocks, faulting, fissuring, and hydrothermal activity along an 80 km-long segment of the Mid-Atlantic Ridge south of the Kane Transform (MARK Area). These variations define two spreading cells separated by a cell boundary zone or a small-offset transform zone. The northern spreading cell is characterized by a median ‘neovolcanic’ ridge which runs down the axis of the median valley floor for 40 km. This edifice is as much as 4 km wide and 600 m high and is composed of very lightly sedimented basalts inferred to be < 5000 years old. It is the largest single volcanic constructional feature discovered to date on the Mid-Atlantic Ridge. The active Snake Pit hydrothermal vent field is on the crest of this ridge and implies the presence of a magma chamber in the northern spreading cell. In contrast, the southern cell is characterized by small, individual volcanos similar in size to the central volcanos in the FAMOUS area. Two of the volcanos that were sampled appear to be composed of dominantly glassy basaltic rocks with very light sediment cover; whereas, other volcanos in this region appear to be older features. The boundary zone between the two spreading cells is intensely faulted and lacks young volcanic rocks. This area may also contain a small-offset ( < 8 km) transform zone. Magmatism in the northern cell has been episodic and tens of thousands of years have lapsed since the last major magmatic event there. In the southern cell, a more continuous style of volcanic accretion appears to be operative. The style of spreading in the southern cell may be much more typical for the Mid-Atlantic Ridge than that of the northern cell because the latter is adjacent to the 150 km-offset Kane Transform that may act as a thermal sink along the MAR. Such large transforms are not common on the MAR, therefore, lithosphere produced in a spreading cell influenced by a large transform may also be somewhat atypical.     

Morphology and crustal structure of a small transform fault along the Mid-Atlantic Ridge: The Atlantis Fracture Zone

The Atlantis Fracture Zone (30° N) is one of the smallest transform faults along the Mid-Atlantic Ridge with a spatial offset of 70 km and an age offset of ~ 6 Ma. The morphology of the Atlantis Fracture Zone is typical of that of slow-slipping transforms. The transform valley is 15–20 km wide and 2–4 km deep. The locus of strike-slip deformation is confined to a narrow band a few kilometers wide. Terrain created at the outside corners of the transform is characterized by ridges which curve toward the ridge-transform intersections and depressions which resemble nodal basins. Hooked ridges are not observed on the transform side of the ridge-transform intersections. Results of the three-dimensional inversion of the surface magnetic field over our survey area suggest that accretionary processes are sufficiently organized within 3–4 km of the transform fault to produce lineated magnetic anomalies. The magnetization solution further documents a 15-km, westward relocation of the axis of accretion immediately south of the transform about 0.25 Ma ago. The Atlantis Transform is associated with a band of high mantle Bouguer anomalies, suggesting the presence of high densities in the crust and/or mantle along the transform, or anomalously thin crust beneath the transform. Assuming that all the mantle Bouguer anomalies are due to crustal thickness variations, we calculate that the crust may be 2–3 km thinner than a reference 6-km thickness beneath the transform valley, and 2–3 km thicker beneath the mid-points of the spreading segments which bound the transform. Our results indicate that crustal thinning is not uniform along the strike of the fracture zone. Based on studies of the state of compensation of the transform, we conclude that the depth anomaly associated with the fracture zone valley is not compensated everywhere by thin crust. Instead, the regional relationship between bathymetry and gravity is best explained by compensation with an elastic plate with an effective thickness of ~ 4 km or greater. However, the remaining isostatic anomalies indicate that there are large variations away from this simple model which are likely due to variations in crustal thickness and density near the transform.     

Structural patterns and tectonic history of the Bauer microplate, Eastern Tropical Pacific

The Bauer microplate was an independent slab of oceanic lithosphere that from 17 Ma to 6 Ma grew from 1.4 × 10⁵ km² to 1.2 × 10⁶ km² between the rapidly diverging Pacific and Nazca plates. Growth was by accretion at the lengthening and overlapping axes of the (Bauer-Nazca) Galapagos Rise (GR) and the (Pacific-Bauer) East Pacific Rise (EPR). EPR and GR axial propagation to create and rapidly grow the counter-clockwise spinning microplate occurred in two phases: (1) 17–15Ma, when the EPR axis propagated north and the GR axis propagated south around a narrow (100- to 200-km-wide) core of older lithosphere; and (2) 8–6 Ma, when rapid northward propagation of the EPR axis resumed, overlapping ∼400 km of the fast-spreading Pacific-Nazca rise-crest and appending a large (200- to 400-km-wide) area of the west flank of that rise as a ‘northern annex’ to the microplate. Between 15 and 8 Ma the microplate grew principally by crustal accretion at the crest of its rises. The microplate was captured by the Nazca plate and the Galapagos Rise axis became extinct soon after 6 Ma, when the south end of the Pacific-Bauer EPR axis became aligned with the southern Pacific-Nazca EPR axis and its north end was linked by the Quebrada Transform to the northern Pacific-Nazca EPR axis. Incomplete multibeam bathymetry of the microplate margins, and of both flanks of the Pacific-Bauer and Bauer-Nazca Rises, together with archival magnetic and satellite altimetry data, clarifies the growth and (counter-clockwise) rotation of the microplate, and tests tectonic models derived from studies of the still active, much smaller, Easter and Juan Fernandez microplates. Our interpretations differ from model predictions in that Euler poles were not located on the microplate boundary, propagation in the 15–8 Ma phase of growth was not toward these poles, and microplate rotation rates were small (5°/m.y.) for much of its history, when long, bounding transform faults reduced coupling to Nazca plate motion. Some structures of the Bauer microplate boundary, such as deep rift valleys and a broad zone of thrust-faulted lithosphere, are, however, similar to those observed around the smaller, active microplates. Analysis of how the Bauer microplate was captured when coupling to the Pacific plate was reduced invites speculation on why risecrest microplates eventually lose their independence.     

The Tamayo transform fault in the mouth of the Gulf of California

The Tamayo transform fault is located at the north end of the East Pacific Rise where it enters the Gulf of California. This paper presents bathymetric, seismic reflection, magnetic, and gravity data from a detailed survey of the transform fault. The dominant feature of the offset region is a bathymetric ridge trending 120°, parallel to the predicted transform plate boundary. This transform ridge is associated with a large (600 ) positive magnetic anomaly, and a very small positive free-air gravity anomaly. Magnetic and gravity models indicate either a basalt or serpentinite composition for the ridge, but cannot distinguish between these possibilities. At its eastern end, the modern zone of strike-slip motion is in a narrow valley south of the transform ridge. The transform plate margin appears to pass through a saddle in the transform ridge and meet the western spreading center segment in the trough north of the transform ridge. On the basis of this survey and previous work, the history of the Tamayo from continental breakup to the present has been reconstructed. Initial rifting occurred along a trend of 130° at approximately 3.5 m.y.b.p. Once the transform fault was free of the constraints imposed by continent-continent and continent-oceanic lithospheric interaction, the trend of the transform fault rotated counter-clockwise. This rotation resulted in a leaky transform fault and intrusion of a large continuous transform ridge. Further adjustments in the spreading center/transform fault plate boundary configuration have given rise to an incipient zone of rifting cutting across the transform ridge and emplacement of diapiric structures.Contribution of the Scripps Institution of Oceanography, new series.     

Tasmante cruise: Swath-mapping and underway geophysics south and west of Tasmania

The 1994 Tasmante swath-mapping and reflection seismic cruise covered 200 000 km² of sea floor south and west of Tasmania. The survey provided a wealth of morphological, structural and sedimentological information, in an area of critical importance in reconstructing the break-up of East Gondwana.The west Tasmanian margin consists of a non-depositional continental shelf less than 50 km wide and a sedimented continental slope about 100 km wide. The adjacent 20 km of abyssal plain to the west is heavily sedimented, and beyond that is lightly sedimented Eocene oceanic crust formed as Australia and Antarctica separated. The swath data revealed systems of 100 m-deep downslope canyons and large lower-slope fault-blocks, striking 320° and dipping landward. These continental blocks lie adjacent to the continent ocean boundary (COB) and are up to 2500 m high and have 15°–20° scarps.The South Tasman Rise (STR) is bounded to the west by the Tasman Fracture Zone extending south to Antarctica. Adjacent to the STR, the fracture zone is represented by a scarp up to 2000 m high with slopes of 15–20°. The scarp consists of continental faultblocks dipping landward. Beyond the scarp to the west is a string of sheared parallel highs, and beyond that is lightly sedimented Oligocene oceanic crust 4200–4600 m deep with distinct E-W spreading fabric. The eastern margin of the bathymetric STR trends about 320° and is structurally controlled. The depression between it and the continental East Tasman Plateau (ETP) is heavily sedimented; its western part is underlain by thinned continental crust and its central part by oceanic crust of Late Cretaceous to Early Tertiary age. The southern margin of the STR is formed by N-S transform faults and south-dipping normal faults.The STR is cut into two major terrains by a N-S fracture zone at 146°15E. The western terrain is characterised by rotated basement blocks and intervening basins mostly trending 270°–290°. The eastern terrain is characterised by basement blocks and intervening strike-slip basins trending 300°–340°. Recent dredging of basement rocks suggests that the western terrain has Antarctic affinities, whereas the eastern terrain has Tasmanian affinities.Stretching and slow spreading between Australia and Antarctica was in a NW direction from 130–45 Ma, and fast spreading was in a N-S direction thereafter. The western STR terrain was attached to Antarctica during the early movement, and moved down the west coast of Tasmania along a 320° shear zone, forming the landward-dipping continental blocks along the present COB. The eastern terrain either moved with the western terrain, or was welded to it along the 146°15 E fracture zone in the Early Tertiary. At 45 Ma, fast spreading started in a N-S direction, and after some probable movement along the 146°15E fracture zone, the west and east STR terrains were welded together and became part of Australia.     

Regional shape and tectonics of the equatorial East Pacific Rise

The geography of the East Pacific Rise (EPR) between 10°N and 6°S, redetermined by new surface ship surveys, is characterized by long spreading axes orthogonal to infrequent transform faults. Near 2°10N the EPR is intersected by the Cocos-Nazca spreading center at the Galapagos triple junction. The present pattern was established 27-5.5 m.y.b.p. by a complex sequence of rise-crest jumps and reorientations from a section of the Pacific-Farallon plate boundary. Transverse profiles of the rise flanks can be matched by thermal contraction curves for aging lithosphere, except between the triple junction and 4°S, where the east flank is anomalously shallow and almost horizontal. Most sections of spreading axis have the 10–30 km wide, 100–400 m high, axial ridge that is characteristic of fast spreading centers. However, within 60 km of the triple junction the rise crest structure is atypical, with an axial rift valley and elevated rift mountains, despite a spreading rate of 140 mm/yr. With the exception of this atypical section, the bathymetric profile along the spreading axis is remarkably even, with continuous, gentle slopes for hundreds of kilometers between major transform faults, where step-like offsets in axial depths occur. Most of the observations can be accommodated by a model in which the long spreading axes are underlain by continuous crustal magma chambers that allow easy longitudinal flow of magma, and whose size controls the style and dimensions of EPR crestal topography.Contribution of the Scripps Institution of Oceanography, new series.     

The East Pacific Rise and its flanks 8–18° N: History of segmentation,propagation and spreading direction based on SeaMARC II and Sea Beam studies

SeaMARC II and Sea Beam bathymetric data are combined to create a chart of the East Pacific Rise (EPR) from 8°N to 18°N reaching at least 1 Ma onto the rise flanks in most places. Based on these data as well as SeaMARC II side scan sonar mosaics we offer the following observations and conclusions. The EPR is segmented by ridge axis discontinuities such that the average segment lengths in the area are 360 km for first-order segments, 140 km for second-order segments, 52 km for third-order segments, and 13 km for fourth-order segments. All three first-order discontinuities are transform faults. Where the rise axis is a bathymetric high, second-order discontinuities are overlapping spreading centers (OSCs), usually with a distinctive 3:1 overlap to offset ratio. The off-axis discordant zones created by the OSCs are V-shaped in plan view indicating along axis migration at rates of 40–100 mm yr^–1. The discordant zones consist of discrete abandoned ridge tips and overlap basins within a broad wake of anomalously deep bathymetry and high crustal magnetization. The discordant zones indicate that OSCs have commenced at different times and have migrated in different directions. This rules out any linkage between OSCs and a hot spot reference frame. The spacing of abandoned ridges indicates a recurrence interval for ridge abandonment of 20,000–200,000 yrs for OSCs with an average interval of approximately 100,000 yrs. Where the rise axis is a bathymetric low, the only second-order discontinuity mapped is a right-stepping jog in the axial rift valley. The discordant zone consists of a V-shaped wake of elongated deeps and interlocking ridges, similar to the wakes of second-order discontinuities on slow-spreading ridges. At the second-order segment level, long segments tend to lengthen at the expense of neighboring shorter segments. This can be understood if segments can be approximated by cracks, because the propagation force at a crack tip is directly proportional to crack length.There has been a counter-clockwise change in the direction of spreading on the EPR between 8 and 18° N during the last 1 Ma. The cumulative change has been 3°–6°, producing opening across the Orozco and Siqueiros transform faults and closing across the Clipperton transform. The instantaneous present-day Cocos-Pacific pole is located at approximately 38.4° N, 109.5° W with an angular rotation rate of 2.10° m.y.^–1 This change in spreading direction explains the predominance of right-stepping discontinuities of orders 2–4 along the Siqueiros-Clipperton and Orozco-Rivera segments, but does not explain other aspects of segmentation which are thought to be linked to patterns of melt supply to the ridge axis.There are 23 significant seamount chains in the mapped area and most are created very near the spreading axis. Nearly all of the seamount chains have trends which fall between the absolute and relative plate motion vectors.     

Sea Beam,SeaMARC II and ALVIN-based studies of faulting on the East Pacific Rise 9°20′ N–9°50′ N

A study of Sea Beam bathymetry and SeaMARC II side-scan sonar allows us to make quantitative measures of the contribution of faulting to the creation of abyssal hill topography on the East Pacific Rise (EPR) 9°15 N–9°50 N. We conclude that fault locations and throws can be confidently determined with just Sea Beam and SeaMARC II based on a number of in situ observations made from the ALVIN submersible. A compilation of 1026 fault scarp locations and scarp height measurements shows systematic variations both parallel and perpendicular to the ridge axis. Outward-facing fault scarps (facing away from the ridge axis), begin to develop within 2 km of the ridge and reach their final average height of 60 m at 5–7 km. Beyond these distances, outward-dipping faults appear to be locked, although there is some indication of continued lengthening of outward-facing fault scarps out to the edge of the survey area. Inward-facing fault scarps (facing toward the ridge axis), initiate 2 km off axis and increase in height and length out to the edge of our data at 30 km, where the average height of inward fault scarps is 60–70 m and the length is 30 km. Continued slip on inward faults at a greater distance off axis is probable, but based on fault lengths, 80% of the lengthening of inward fault scarps occurs within 30 km of the axis (>95% for outward faults). Along-strike propagation and linkage of these faults are common. Outward-dipping faults accommodate more apparent horizontal strain than inward ones within 10 km of the ridge. The net horizontal extension due to faulting at greater distances is estimated as 4.2–4.3%, and inward and outward faults contribute comparably. Both inward- and outward-facing fault scarps increase in height from north to south in our study area in the direction of decreasing inferred magma supply. Average fault spacing is 2 km for both inward-dipping and outward-dipping faults. The azimuths of fault scarps document the direction of ridge spreading, but they are sensitive to local changes in least compressive stress direction near discontinuities. Both the ridge trend and fault scarp azimuths show a clockwise change in trend of 3–5° from 9°50 N to 9°15 N approaching the 9° N overlapping spreading center.     

Segmentation and disruption of the East Pacific Rise in the mouth of the Gulf of California

Analysis of new multibeam bathymetry and all available magnetic data shows that the 340 km-long crest of the East Pacific Rise between Rivera and Tamayo transforms contains segments of both the Pacific-Rivera and the Pacific-North America plate boundaries. Another Pacific-North America spreading segment (Alarcon Rise) extends 60 km further north to the Mexican continental margin. The Pacific-North America-Rivera triple junction is now of the RRR type, located on the risecrest 60 km south of Tamayo transform. Slow North America-Rivera rifting has ruptured the young lithosphere accreted to the east flank of the rise, and extends across the adjacent turbidite plain to the vicinity of the North America-Rivera Euler pole, which is located on the plate boundary. The present absolute motion of the Rivera microplate is an anticlockwise spin at 4° m.y.^–1 around a pole located near its southeast corner; its motion has recently changed as the driving forces applied to its margins have changed, especially with the evolution of the southern margin from a broad shear zone between Rivera and Mathematician microplates to a long Pacific-Rivera transform. Pleistocene rotations in spreading direction, by as much as 15° on the Pacific-Rivera boundary, have segmented the East Pacific Rise into a staircase of en echelon spreading axes, which overlap at lengthening and migrating nontransform offsets. The spreading segments vary greatly in risecrest geomorphology, including the full range of structural types found on other rises with intermediate spreading rates: axial rift valleys, split shield volcanoes, and axial ridges. Most offsets between the segments have migrated southward, but within the past 1 m.y. the largest of them (with 14–27 km of lateral displacement) have shown dueling behavior, with short-lived reversals in migration direction. Migration involves propagation of a spreading axis into abyssal hill terrain, which is deformed and uplifted while it occupies the broad shear zones between overlapping spreading axes. Tectonic rotation of the deformed crust occurs by bookshelf faulting, which generates teleseismically recorded strike-slip earthquakes. When reversals of migration direction occur, plateaus of rotated crust are shed onto the rise flanks.