An effective wave-trapping system

This is a theoretical study of a breakwater-seawall wave-trapping system. The breakwater, being flexible, porous and thin beam-like, is held fixed in the sea bed and idealized as one-dimensional beam of uniform flexural rigidity and uniform mass per unit length. The seawall, being vertical, rigid and impermeable, is located behind the breakwater by a distance of L. The velocity potentials of the wave motion are coupled with the equation of motion of the breakwater. Analytical solutions in closed forms are obtained for the reflected and transmitted velocity potentials together with the displacement of the breakwater. The free-surface elevation, hydrodynamic forces acting on both the breakwater and the seawall are determined. It is found that the values of L, at which the minimum reflected-wave amplitudes reach, are in the range of λ to λ for breakwaters with different rigidity and permeability. It is shown that, when the spacing L maintains values in the range of λ to λ, the resultant amplitudes in both regions can be reduced to a favorable amount for any wave and structural parameters. It is also shown that the hydrodynamic forces on the breakwater decrease as the structural flexibility and porosity increase. However, with increases of the structural porosity and flexibility, the seawall experiences an increase of the hydrodynamic forces. Various results are presented in this paper to illustrate the effects of the structural and perous parameters together with the spacing on the response and efficiency of the breakwater-seawall wave-trapping system.     

Dual pontoon floating breakwater

The hydrodynamic properties of a dual pontoon floating breakwater consisting of a pair of floating cylinders of rectangular section, connected by a rigid deck, is investigated theoretically. The structure is partially restrained by linear symmetric moorings fore and aft. The fluid motion is idealized as linearized, two-dimensional potential flow and the equation of motion of the breakwater is taken to be that of a two-dimensional rigid body undergoing surge, heave and pitch motions. The solution for the fluid motion is obtained by the boundary integral equation method using an appropriate Green's function. Numerical results are presented which illustrate the effects of the various wave and structural parameters on the efficiency of the breakwater as a barrier to wave action. It is found that the wave reflection properties of the structure depend strongly on the width, draft and spacing of the pontoons and the mooring line stiffness, while the excess buoyancy of the system is of lesser importance.     

Analytical and Experimental Studies on Hydrodynamic Performance of Semi-Immersed Jarlan-Type Perforated Breakwaters

The present study proposes a new semi-immersed Jarlan-type perforated breakwater including a perforated front wall, a solid rear wall, and a horizontal perforated plate connecting the lower tips of the two walls. An analytical solution is developed to estimate the hydrodynamic performance of the new breakwater. The analytical solution is confirmed by solutions for special cases, an independently developed multi-domain boundary element method solution and experimental data. Numerical examples based on the analytical solution indicate that compared with previous semi-immersed breakwaters, the new breakwater may have better wave-absorbing performance and smaller wave forces. Some useful results are presented for practical designs of semi-immersed Jarlan-type perforated breakwaters.     

波浪作用下方箱-水平板浮式防波堤时域水动力分析

在线性化势流理论范围内求解方箱-水平板浮式防波堤的波浪绕射和辐射问题,从时域角度分析了浮式防波堤的水动力特性.采用格林函数法将速度势定解问题的控制微分方程变换成边界上的积分方程进行数值求解,浮式防波堤的运动方程采用四阶Runge-Kutta方法求解.对不同层数水平板的浮式防波堤的波浪透射系数、运动响应和锚链受力进行了计算分析,结果表明方箱相对宽度对方箱-水平板浮式防波堤的波浪透射作用有重要的影响,透射系数随着方箱相对宽度的增加而减小.对于方箱加二层水平板的浮式防波堤,在本研究的计算条件下,当方箱相对宽度从0.110增加至0.295时,透射系数从0.88减小至0.30.水平板有利于增加浮式防波堤对波浪的衰减作用,但随着水平板层数从0增加至2,这种波浪衰减作用增加的程度趋弱.方箱-水平板的浮式防波堤的运动量小于单一方箱防波堤的运动量.与此对应,方箱-水平板防波堤的锚链受力小于单一方箱防波堤的锚链受力.     

Wave diffraction through submerged flexible breakwaters

This paper presents an analytical, computationally efficient method for the wave reflection and dynamic displacement of a submerged flexible breakwater. The solution of the two-dimensional linearized hydrodynamic problem introduced is based on the eigenfunction expansion technique. The breakwater is assumed to be thin, impermeable, flexible, moored to the bed through tethers and kept in tension by means of a floating buoy at its tip. The beam structure is considered to be either clamped or hinged at the sea bed, situated in an arbitrary water depth and subjected to normal linear waves. Numerical examples presented by this method are compared with those obtained by the Boundary Integral Equation Method, presented by Williams et al. Comparisons show an excellent agreement over a wide range of parameters for the wave reflection and the dynamic displacement. Numerical results are presented, mainly to show the effect of the breakwater rigidity and the method of fixation on the wave reflection and the structural displacement over a wide range of wave frequencies.     

Asymptotic analysis of the interaction between linear long waves and a submerged floating breakwater of wavy surfaces

In this work, we carried out an asymptotic analysis, up to the second order in a regular expansion, of the interaction of linear long waves with an impermeable, fixed, submerged breakwater composed of wavy surfaces. Below the floating breakwater, there is also a step with a wavy surface. The undulating surfaces are described by sinusoidal profiles. The effects of three different geometric parameters — the amplitude of the wavy surfaces and the submerged length and width of the structure — on the reflection and transmission coefficients are analyzed. The hydrodynamic forces are also determined. The governing equations are expressed in dimensionless form. Using the domain perturbation method, the small wavy surfaces of the breakwater are linearized. The wavy surfaces of the breakwater generate larger values of the reflection coefficient than those obtained for breakwaters with flat surfaces, and the largest values of this coefficient are obtained when the length of the breakwater is of the same order of magnitude as the wavelength. The asymptotic solution is compared with the theoretical solutions that have been reported in the specialized literature and with a numerical solution. The present mathematical model can be used as a practical reference for the selection of the geometric configuration of a submerged floating breakwater under shallow flow conditions.     

Scaled Boundary Finite Element Analysis of Wave Passing A Submerged Breakwater

The scaled boundary finite element method （SBFEM） is a novel semi-analytical technique combining the advantage of the finite element method （FEM） and the boundary element method （BEM） with its unique properties. In this paper, the SBFEM is used for computing wave passing submerged breakwaters, and the reflection coeffcient and transmission coefficient are given for the case of wave passing by a rectangular submerged breakwater, a rigid submerged barrier breakwater and a trapezium submerged breakwater in a constant water depth. The results are compared with the analytical solution and experimental results. Good agreement is obtained. Through comparison with the results using the dual boundary element method （DBEM）, it is found that the SBFEM can obtain higher accuracy with fewer elements. Many submerged breakwaters with different dimensions are computed by the SBFEM, and the changing character of the reflection coeffcient and the transmission coefficient are given in the current study.     

多消浪室局部开孔沉箱防波堤反射特性的迭代解析研究

基于势流理论,对多消浪室局部开孔沉箱防波堤的反射特性进行解析研究。研究中采用开孔墙处的二次压力损失边界条件,可以直接考虑波高对于开孔墙处能量损失的影响。利用匹配特征函数展开法和迭代方法得到当前问题的解析解。收敛性验证表明,迭代计算和级数解均具有良好的收敛性。该解析解的计算结果与分区边界元的数值计算结果一致,并且与已有的试验结果符合良好。通过算例分析,研究开孔沉箱防波堤反射系数的主要影响因素。结果表明：与单消浪室开孔沉箱防波堤相比,多消浪室开孔沉箱防波堤可以在更宽的波浪频率范围内保持低反射;增大开孔墙的开孔率,有利于降低多消浪室开孔沉箱防波堤的反射系数;当开孔墙的开孔率沿着入射波方向依次递减时,多消浪室开孔沉箱防波堤的反射系数较小。本文所建立的解析模型简单可靠,可用于工程初步设计中分析开孔沉箱防波堤的水动力性能。     

Floating pontoon breakwaters

The hydrodynamic properties of a pair of long floating pontoon breakwaters of rectangular section are investigated theoretically. The structures are partially restrained by linear symmetric moorings fore and aft. The fluid motion is idealized as linearized, two-dimensional potential flow. The breakwater motions are assumed to be two-dimensional, in surge, heave and pitch. The solution for the fluid motion is obtained by the boundary integral equation method using an appropriate Green's function. Numerical results are presented that illustrate the effects of the various wave and structural parameters on the efficiency of the breakwaters as barriers to wave action. It is found that the wave reflection properties of the structures depend strongly on their width, draft and spacing and the mooring line stiffnesses, while their excess buoyancy is of lesser importance.     

Hydrodynamic characteristics of semi-immersed breakwater with an attached porous plate

In the present study, wave interaction with a fixed, partially immersed breakwater of box type with a plate attached (impermeable-permeable) at the front part of the structure is investigated numerically and experimentally. The large scale laboratory experiments on the interaction of regular waves with the special breakwater were conducted in the wave flume of Laboratori d’Enginyeria Marνtima (LIM) at Universitat Politecnica de Catalunya (UPC) in Barcelona. Experimental results are compared with numerical results obtained with the use of the Cornell breaking Wave and Structures (COBRAS) wave model. The effects of an impermeable as well as a permeable plate attached to the bottom of the breakwater on its hydrodynamic characteristics (wave transmission, reflection, dissipation, velocity and turbulence kinetic energy) are investigated. Computed velocities and turbulence kinetic energy in the vicinity of the structure indicate the effects of the breakwater with the attached (impermeable/permeable) plate on the flow pattern and the turbulence structure. The attached impermeable plate at the front part of the breakwater enhances significantly the efficiency of the structure in attenuating the incident waves. The permeable plate reduces the efficiency of the structure since wave energy is transmitted through the porous body of the plate. Based on the hydrodynamic characteristics it is inferred that the breakwater with an impermeable plate attached to its bottom is more efficient. The comparison of horizontal and vertical forces acting on the breakwater for all cases examined reveals that plate porosity influences slightly vertical force and severely horizontal force acting on the structure, reducing maximum values in both cases.     

Numerical prediction of performance of submerged breakwaters

The results of a numerical model study on the transmission characteristics of a submerged breakwater are presented. Study aimed to determine the effect of depth of submergence, crest width, initial wave conditions and material properties on the transmission characteristics of the submerged breakwater. The results highlight the optimum crest width of the breakwater and optimum clear spacing between two breakwaters. A submerged permeable breakwater with d_s/d=0.5, p=0.3 and f=1.0, reduces the transmission coefficient by about 10% than the impermeable breakwater. The results indicates an optimum width ratio of B/d=0.75 for achieving minimum transmission. By restricting the effective width ratio of the series of breakwaters to 0.75, studies were conducted to determine the effect of clear spacing between breakwaters on transmission coefficient, suggesting an optimum clear spacing of w/b=2.00 to obtain K_t below 0.6.     

Numerical investigation on the dynamics of a vertical wall defenced by an offshore breakwater

The numerical and experimental investigations on the performance of an offshore-submerged breakwater in reducing the wave forces and wave run-up on vertical wall are presented. A two-dimensional finite-element model is employed to study the hydrodynamic performance of the submerged breakwater under the action of regular and random waves. The numerical prediction has been supported with experimental measurements. The wave forces and wave run-up on the vertical wall were measured for different breakwater configurations. The applicability of linear theoretical model in the prediction of wave forces on the wall by a submerged breakwater has been discussed.     

沉箱式防波堤蛇行破坏的期望滑移量模型

防波堤是港工建筑物中的一个重要组成部分,主要作用为保护港湾免受波浪、冰、沙等海洋动力因素的侵袭.综合以往的相关文献,对于防波堤断面破坏形式,如滑移、倾覆、地基滑动等有了非常充分的研究,可以定量计算出其损坏程度.而对于防波堤平面形态的损坏,如蛇行破坏等,只是较深入研究了失效机理,并没有一个能够定量计算其后果的模型.本文第一部分将期望滑移量模型和绕射模型结合,建立了计算半无限长沉箱式防波堤在使用期限内蛇行破坏程度的模型.第二部分则利用实测的波浪数据设计并计算了一个沉箱式防波堤实例.结果表明,各个堤段的期望滑移量呈现出一定周期性变化的规律,堤头附近区域的滑移量远大于较远的堤段,这对于防波堤施工过程中的堤头防护具有参考价值.本文为建立防波堤平面形态损坏定量计算模型提供了一种思路.     

Incompressible SPH flow model for wave interactions with porous media

The paper presents an Incompressible Smoothed Particle Hydrodynamics (ISPH) method to simulate wave interactions with a porous medium. The SPH method is a mesh free particle modeling approach that is capable of tracking the large deformation of free surfaces in an easy and accurate manner. The ISPH method employs a strict incompressible hydrodynamic formulation to solve the fluid pressure and the numerical solution is obtained by using a two-step semi-implicit scheme. The ISPH flow model solves the unsteady 2D Navier–Stokes (NS) equations for the flows outside the porous media and the NS type model equations for the flows inside the porous media. The presence of porous media is considered by including additional friction forces into the equations. The developed ISPH model is first validated by the solitary and regular waves damping over a porous bed and the solitary wave interacting with a submerged porous breakwater. The convergence of the method and the sensitivity of relevant model parameters are discussed. Then the model is applied to the breaking wave interacting with a breakwater covered with a layer of porous materials. The computational results demonstrate that the ISPH flow model could provide a promising simulation tool in coastal hydrodynamic applications.     

Wave motion over a submerged breakwater with an upper horizontal porous plate and a lower horizontal solid plate

This study examines the hydrodynamic performance of a modified two-layer horizontal-plate breakwater. The breakwater consists of an upper submerged horizontal porous plate and a lower submerged horizontal solid plate. By means of the matched eigenfunction expansion method, a linear analytical solution is developed for the interaction of water waves with the structure. Then the reflection coefficient, the transmission coefficient, the energy-loss coefficient and the wave forces acting on the plates are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a single submerged horizontal solid plate and a single submerged horizontal porous plate. Numerical results show that with a suitable geometrical porosity of the upper plate, the uplift wave forces on both plates can be controlled at a low level. Numerical results also show that the transmission coefficient will be always small if the dimensionless plate length (plate length versus incident wavelength) exceeds a certain moderate value. This is rather significant for practical engineering, as the incident wavelength varies over a wide range in practice. Moreover, it is found that the hydrodynamic performance of the present structure may be further enhanced if the lower plate is also perforated.     

Wave interaction with a wave absorbing double curtain-wall breakwater

This study examines the hydrodynamic performance of a wave absorbing double curtain-wall breakwater. The breakwater consists of a seaward perforated wall and a shoreward impermeable wall. Both walls extend from above the seawater to some distance above the seabed. Then the below gap allows the seawater exchange, the sediment transport and the fish passage. By means of the eigenfunction expansion method and a least square approach, a linear analytical solution is developed for the interaction of water waves with the breakwater. Then the reflection coefficient, the transmission coefficient and the wave forces acting on the walls are calculated. The numerical results obtained for limiting cases agree very well with previous predictions for a single partially immersed impermeable wall, the double partially immersed impermeable walls and the bottom-standing Jarlan-type breakwater. The predicted reflection coefficients for the present breakwater also agree reasonable with previous experimental results. Numerical results show that with appropriate structure parameters, the reflection and transmission coefficients of the breakwater may be both below 0.5 at a wide range of the relative water depth. At the same time, the magnitude of wave force acting on each wall is small. This is significant for practical engineering.     

部分反射直墙前潜堤水动力特性研究

基于线性势流理论,对部分反射直墙前潜堤的水动力特性进行了理论研究。利用匹配特征函数展开法给出了潜堤透射系数和反射系数的计算方法,计算结果与边界元方法的计算结果一致。利用数值算例分析了潜堤透射系数和反射系数的主要影响因素。增大部分反射直墙的反射系数,将加大潜堤的透射系数。随着潜堤相对宽度或潜堤与直墙之间相对间距的增加,潜堤透射系数和反射系数呈周期性变化,但变化规律相反。     

Stiffness of mooring lines and performance of floating breakwater in three dimensions

In the present paper, the performance of a moored floating breakwater under the action of normal incident waves is investigated in the frequency domain. A three-dimensional hydrodynamic model of the floating body is coupled with a static and dynamic model of the mooring lines, using an iterative procedure. The stiffness coefficients of the mooring lines in six degrees of freedom of the floating breakwater are derived based on the differential changes of mooring lines' tensions caused by the static motions of the floating body. The model of the moored floating system is compared with experimental and numerical results of other investigators. An extensive parametric study is performed to investigate the effect of different configurations (length of mooring lines and draft) on the performance of the moored floating breakwater. The draft of the floating breakwater is changed through the appropriate modification of mooring lines' length. Numerical results demonstrate the effects of the wave characteristics and mooring lines' conditions (slack-taut). The existence of ‘optimum’ configuration of the moored floating breakwater in terms of wave elevation coefficients and mooring lines' forces is clearly demonstrated, through a decision framework.     

Wave interaction with ‘’-type breakwaters

The wave transmission, reflection and energy dissipation characteristics of ‘’-type breakwaters were studied using physical models. Regular and random waves in a wide range of wave heights and periods and a constant water depth were used. Five different depths of immersion (two emerged, one surface flushing and two submerged conditions) of this breakwater were selected. The coefficient of transmission, K_t, and coefficient of reflection, K_r, were obtained from the measurements, and the coefficient of energy loss, K_l was calculated using the law of balance of energy. It was found that the wave transmission is significantly reduced with increased relative water depth, d/L, whether the vertical barrier of the breakwater is surface piercing or submerged, where ‘d’ is the water depth and ‘L’ is the wave length. The wave reflection decreases and energy loss increases with increased wave steepness, especially when the top tip of the vertical barrier of this breakwater is kept at still water level (SWL). For any incident wave climate (moderate or storm waves), the wave transmission consistently decreases and the reflection increases with increased relative depth of immersion, Δ/d from −0.142 to 0.142. K_t values less than 0.3 can be easily obtained for the case of Δ/d=+0.071 and 0.142, where Δ is the height of exposure (+ve) or depth of immersion (−ve) of the top tip of the vertical barrier. This breakwater is capable of dissipating wave energy to an extent of 50–80%. The overall performance of this breakwater was found to be better in the random wave fields than in the regular waves. A comparison of the hydrodynamic performance of ‘’-type and ‘T’-type shows that ‘T’-type breakwater is better than ‘’-type by about 20–30% under identical conditions.     

Wave interaction with a semi-porous cylindrical breakwater mounted on a storage tank

The interaction of linear water waves with a semi-porous cylindrical breakwater surrounding a rigid vertical circular cylinder mounted on a storage tank is investigated theoretically. The cylindrical breakwater structure is porous in the vicinity of the free-surface, while at some distance below the water surface it becomes impermeable. Under the assumptions of linearized potential flow, the coupled problem of flow in the interior and exterior fluid regions is solved by an eigenfunction expansion approach. Analytical expressions are obtained for the wave motion in both the interior and exterior flow regions. Numerical results are presented which illustrate the effects of the various wave and structural parameters on the hydrodynamic loads and interior and exterior wave fields. It is found that for certain parameter combinations the semi-porous, cylindrical breakwater may result in a significant reduction in the wave field and hydrodynamic forces experienced by the interior structure.