The Gumeshevo skarn-porphyry copper deposits in the Central Urals,Russia: Evolution of the ore-magmatic system as deduced from isotope geochemistry (Sr,Nd, C,O, H)

The Early Devonian Gumeshevo deposit is one of the largest ore objects pertaining to the dioritic model of the porphyry copper system paragenetically related to the low-K quartz diorite island-arc complex. The (⁸⁷Sr/⁸⁶Sr)_t and (ɛ_Nd)_t of quartz diorite calculated for t = 390 Ma are 0.7038–0.7045 and 5.0–5.1, respectively, testifying to a large contribution of the mantle component to the composition of this rock. The contents of typomorphic trace elements (ppm) are as follows: 30–48 REE sum, 5–10 Rb, 9–15 Y, and 1–2 Nb. The REE pattern is devoid of Eu anomaly. Endoskarn of low-temperature and highly oxidized amphibole-epidote-garnet facies is surrounded by the outer epidosite zone. Widespread retrograde metasomatism is expressed in replacement of exoskarn and marble with silicate (chlorite, talc, tremolite)-magnetite-quartz-carbonate mineral assemblage. The ⁸⁷Sr/⁸⁶Sr ratios of epidote in endoskarn and carbonate in retrograde metasomatic rocks (0.7054–0.7058 and 0.7053–0.7065, respectively) are intermediate between the Sr isotope ratios of quartz dioritic rocks and marble (⁸⁷Sr/⁸⁶Sr = 0.70784 ± 2). Isotopic parameters of the fluid equilibrated with silicates of skarn and retrograde metasomatic rocks replacing exoskarn at 400°C are δ¹⁸O = +7.4 to +8.5‰ and δD = −49 to −61‰ (relative to SMOW). The δ¹³C and δ¹⁸O of carbonates in retrograde metasomatic rocks after marble are −5.3 to +0.6 (relative to PDB) and +13.0 to +20.2% (relative to SMOW), respectively. Sulfidation completes metasomatism, nonuniformly superimposed on all metasomatic rocks and marbles with formation of orebodies, including massive sulfide ore. The δ³⁴S of sulfides is 0 to 2‰ (relative to CDT);⁸⁷Sr/⁸⁶Sr of calcite from the late calcite-pyrite assemblage replacing marble is 0.704134 ± 6. The δ¹³C and ⁸⁷Sr/⁸⁶Sr of postore veined carbonates correlate positively (r = 0.98; n = 6). The regression line extends to the marble field. Its opposite end corresponds to magmatic (in terms of Bowman, 1998b) calcite with minimal δ¹³C, δ¹⁸O, and ⁸⁷Sr/⁸⁶Sr values (−6.9 ‰, +6.7‰, and 0.70378 ± 4, respectively). The aforementioned isotopic data show that magmatic fluid was supplied during all stages of mineral formation and interacted with marble and other rocks, changing its Sr, C, and O isotopic compositions. This confirms the earlier established redistribution of major elements and REE in the process of metasomatism. A contribution of meteoric and metamorphic water is often established in quartz from postore veins.     

Fluid flow in marbles at Jervois, central Australia: oxygen isotope disequilibrium and zoning produced by decoupling of mineralogical and isotopic resetting

The Jervois region of the Arunta Inlier, central Australia, contains para- and orthogneisses that underwent low-pressure amphibolite facies metamorphism (P = 200–300 MPa, T = 520–600 °C). Marble layers cut by metre-wide quartz + garnet ± epidote veins comprise calcite, quartz, epidote, clinopyroxene, grandite garnet, and locally wollastonite. The marbles also contain locally discordant decimetre-thick garnet and epidote skarn layers. The mineral assemblages imply that the rocks were infiltrated by water-rich fluids (XCO₂ = 0.1–0.3) at ∼600 °C. The fluids were probably derived from the quartz-garnet vein systems that represent conduits for fluids exsolved from crystallizing pegmatites emplaced close to the metamorphic peak. At one locality, the marble has calcite (Cc) δ¹⁸O values of 9–18‰ and garnet (Gnt) δ¹⁸O values of 10–14‰. The δ¹⁸O(Gnt) values are only poorly correlated with δ¹⁸O(Cc), and the δ¹⁸O values of some garnet cores are higher than the rims. The isotopic disequilibrium indicates that garnet grew before the δ¹⁸O values of the rock were reset. The marbles contain  ≤15% garnet and, for water-rich fluids, garnet-forming reactions are predicted to propagate faster than O-isotopes are reset. The Sm-Nd and Pb-Pb ages of garnets imply that fluid flow occurred at 1750–1720 Ma. There are no significant age differences between garnet cores and rims, suggesting that fluid flow was relatively rapid. Texturally late epidote has δ¹⁸O values of 1.5–6.2‰ implying δ¹⁸O(H₂O) values of 2–7‰. Waters with such low-δ¹⁸O values are probably at least partly meteoric in origin, and the epidote may be recording the late influx of meteoric water into a cooling hydrothermal system. Received: 29 April 1996 / Accepted: 12 March 1997     

Carbon and oxygen isotope constraints on fluid sources and fluid–wallrock interaction in regional alteration and iron-oxide–copper–gold mineralisation, eastern Mt Isa Block, Australia

The source of metasomatic fluids in iron-oxide–copper–gold districts is contentious with models for magmatic and other fluid sources having been proposed. For this study, δ ¹⁸O and δ ¹³C ratios were measured from carbonate mineral separates in the Proterozoic eastern Mt Isa Block of Northwest Queensland, Australia. Isotopic analyses are supported by petrography, mineral chemistry and cathodoluminescence imagery. Marine meta-carbonate rocks (ca. 20.5‰ δ ¹⁸O and 0.5‰ δ ¹³C calcite) and graphitic meta-sedimentary rocks (ca. 14‰ δ ¹⁸O and −18‰ δ ¹³C calcite) are the main supracrustal reservoirs of carbon and oxygen in the district. The isotopic ratios for calcite from the cores of Na–(Ca) alteration systems strongly cluster around 11‰ δ ¹⁸O and −7‰ δ ¹³C, with shifts towards higher δ ¹⁸O values and higher and lower δ ¹³C values, reflecting interaction with different hostrocks. Na–(Ca)-rich assemblages are out of isotopic equilibrium with their metamorphic hostrocks, and isotopic values are consistent with fluids derived from or equilibrated with igneous rocks. However, igneous rocks in the eastern Mt Isa Block contain negligible carbon and are incapable of buffering the δ ¹³C signatures of CO₂-rich metasomatic fluids associated with Na–(Ca) alteration. In contrast, plutons in the eastern Mt Isa Block have been documented as having exsolved saline CO₂-rich fluids and represent the most probable fluid source for Na–(Ca) alteration. Intrusion-proximal, skarn-like Cu–Au orebodies that lack significant K and Fe enrichment (e.g. Mt Elliott) display isotopic ratios that cluster around values of 11‰ δ ¹⁸O and −7‰ δ ¹³C (calcite), indicating an isotopically similar fluid source as for Na–(Ca) alteration and that significant fluid–wallrock interaction was not required in the genesis of these deposits. In contrast, K- and Fe-rich, intrusion-distal deposits (e.g. Ernest Henry) record significant shifts in δ ¹⁸O and δ ¹³C towards values characteristic of the broader hostrocks to the deposits, reflecting fluid–wallrock equilibration before mineralisation. Low temperature, low salinity, low δ ¹⁸O (<10‰ calcite) and CO₂-poor fluids are documented in retrograde metasomatic assemblages, but these fluids are paragenetically late and have not contributed significantly to the mass budgets of Cu–Au mineralisation.     

Mechanisms of oxygen isotopic exchange and isotopic evolution of <Superscript>18</Superscript>O/<Superscript>16</Superscript>O-depleted periclase zone marbles in the Alta aureole,Utah: insights from ion microprobe analysis of calcite

Oxygen isotope ratios have been measured by ion microprobe and millimeter-scale dental drill along detailed sampling traverses across the boundary between periclase-bearing (δ¹⁸O = 11.8‰) and periclase-free (δ¹⁸O = 17.2‰) marble layers in the periclase (Per) zone of the Alta Stock aureole, Utah. These data define a steep, coherent gradient in δ¹⁸O that is displaced a short distance (~4 cm) into the periclase-free (Cal + Fo) layer. SEM and ion microprobe analyses show two isotopically and texturally distinct types of calcite at the grain scale. Clear (well polished) calcite grains are isotopically homogeneous (within analytical uncertainty; ±0.27‰, 2SD). More poorly polished (pitted), texturally retrograde ‘turbid’-looking calcite has lower and more variable δ¹⁸O values, and replaces clear calcite along fractures, cleavage traces or grain boundaries. Despite significant lowering of the δ¹⁸O values in calcite throughout both layers during prograde metamorphism, ion microprobe analyses indicate that individual clear calcite grains are now isotopically homogeneous across the entire gradient in δ¹⁸O. Diffusion calculations indicate that conservative time scales required for isotopic homogenization of calcite grains by volume diffusion, 30,000–62,000 years at 575–600°C, exceed significantly the timescale (~1,250 years) estimated for the prograde development of the δ¹⁸O gradient at the boundary between these two marble layers. The ion microprobe data and these diffusion calculations suggest instead that surface reaction mechanisms accompanying recrystallization are responsible for the observed oxygen isotope homogeneity of these calcite grains. Thus, the ion microprobe data are consistent with the formation of calcite in oxygen isotope exchange equilibrium with infiltrating fluid during prograde reaction and recrystallization. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The Darasun gold deposit,Eastern Transbaikal region: Chemical composition,REE patterns,and stable carbon and oxygen isotopes of carbonates from ore veins

The chemistry, REE patterns, and carbon and oxygen isotopic compositions of carbonates from ore veins of the Darasun deposit are discussed. In addition to the earlier described siderite, calcite, and carbonates of the dolomite-ankerite series, kutnahorite is identified. The total REE content in Fe-Mg carbonates of the dolomite-ankerite series (2.8–73 ppm) is much lower than in later calcite (18–390 ppm). δ¹³C of Fe-Mg carbonates and calcite varies from +1.1 to −6.7‰ and from −0.9 to −4.9‰, respectively. δ¹⁸O of Fe-Mg carbonates and calcite varies from +17.6 to 3.6‰ and from +15.7 to −0.5‰, respectively. The REE sum and carbon and oxygen isotopic compositions reveal zonal distribution relative to the central granodiorite porphyry stock. The correlation between the carbon and oxygen isotopic compositions and REE sum reflects variations in the physicochemical formation conditions and composition of ore-forming fluid. The isotopic composition of fluid is calculated, and possible sources of its components are considered. Earlier established evidence for a magmatic source of ore-forming fluid and participation of meteoric water in ore formation is confirmed. Geochemical evidence for interaction of ore-forming fluid with host rocks is furnished. The relationships between the REE sum, on the one hand, and carbon and oxygen isotopic compositions of hydrothermal ore-forming fluid, on the other, are established.     

Oxygen isotope evidence for subduction and rift-related mantle metasomatism beneath the Colorado Plateau–Rio Grande rift transition

Spinel lherzolite and pyroxenite xenoliths from the Rio Puerco Volcanic Field, New Mexico, were analyzed for oxygen isotope ratios by laser fluorination. In lherzolites, olivine δ¹⁸O values are high (+5.5‰), whereas δ¹⁸O values for pyroxenes are low (cpx=+5.1‰; opx=+5.4‰) compared to average mantle values. Pyroxenite δ¹⁸O values (cpx=+5.0‰; opx=+5.3‰) are similar to those of the lherzolites and are also lower than typical mantle oxygen isotope compositions. Texturally and chemically primary calcite in pyroxenite xenoliths is far from isotopic equilibrium with other phases, with δ¹⁸O values of +21‰. The isotopic characteristics of the pyroxenite xenoliths are consistent with a petrogenetic origin from mixing of lherzolitic mantle with slab-derived silicate and carbonatite melts. The anomalously low δ¹⁸O in the pyroxenes reflects metasomatism by a silicate melt from subducted altered oceanic crust, and high δ¹⁸O calcite is interpreted to have crystallized from a high δ¹⁸O carbonatitic melt derived from subducted ophicarbonate. Similar isotopic signatures of metasomatism are seen throughout the Rio Puerco xenolith suite and at Kilbourne Hole in the southern Rio Grande rift. The discrete metasomatic components likely originated from the subducted Farallon slab but were not mobilized until heating associated with Rio Grande rifting occurred. Oxygen diffusion modeling requires that metasomatism leading to the isotopic disequilibrium between calcite and pyroxene in the pyroxenites occurred immediately prior to entrainment. Melt infiltration into spinel-facies mantle (xenoliths) prior to eruption was thus likely connected to garnet-facies melting that resulted in eruption of the host alkali basalt.     

Oxygen isotopic composition of quartz veins and host rocks at the Sukhoi Log deposit,Russia

The relationships between the δ¹⁸O of quartz veins and veinlets pertaining to the main stage of gold mineralization at the Sukhoi Log deposit and metasomatically altered host slates are estimated. The oxygen isotopic composition of veined quartz and host slates is not uniform. The δ¹⁸O of quartz veins from the Western, Central, and Sukhoi Log areas of the deposit vary from +16 to + 18 ‰. The δ¹⁸O range of metasomatically altered slates in the Western and Sukhoi Log areas attains 6 ‰. The δ¹⁸O of quartz veins are always higher than those of host slates by 3–7‰. The regular difference in the δ¹⁸O between quartz veins and host slates indicates that the oxygen isotopic composition of the ore-bearing fluid forming the system of quartz veins and veinlets at the Sukhoi Log deposit could have formed as a result of interaction with silicate rocks, for instance, terrigenous slates enriched in δ¹⁸O. Such interaction, however, took place at deeper levels of the Sukhoi Log deposit. It is suggested that the fluid phase participating in the formation of the vein and veinlet system had initially high δ¹⁸O(>+10‰) due to interaction with the rocks enriched in δ¹⁸O at a low fluid/rock ratio. The oxygen isotope data indicate that the fluid participating in the formation of gold mineralization at the Sukhoi Log deposit was not in equilibrium with igneous rocks at high temperatures.     

Oxygen and hydrogen isotope study of high-pressure metagabbros and metabasalts (Cyclades, Greece): implications for the subduction of oceanic crust

Oxygen and hydrogen stable isotope ratios of eclogite-facies metagabbros and metabasalts from the Cycladic archipelago (Greece) document the scale and timing of fluid–rock interaction in subducted oceanic crust. Close similarities are found between the isotopic compositions of the high-pressure rocks and their ocean-floor equivalents. High-pressure minerals in metagabbros have low δ¹⁸O values: garnet 2.6 to 5.9‰, glaucophane 4.3 to 7.1‰; omphacite 3.5 to 6.2‰. Precursor actinolite that was formed during the hydrothermal alteration of the oceanic crust by seawater analyses at 3.7 to 6.3‰. These compositions are in the range of the δ¹⁸O values of unaltered igneous oceanic crust and high-temperature hydrothermally altered oceanic crust. In contrast, high-pressure metabasalts are characterised by ¹⁸O-enriched isotopic compositions (garnet 9.2 to 11.5‰, glaucophane 10.6 to 12.5‰, omphacite 10.2 to 12.8‰), which are consistent with the precursor basalts having undergone low-temperature alteration by seawater. D/H ratios of glaucophane and actinolite are also consistent with alteration by seawater. Remarkably constant oxygen isotope fractionations, compatible with isotopic equilibrium, are observed among high-pressure minerals, with Δ_{glaucophane−garnet} = 1.37 ± 0.24‰ and Δ_{omphacite−garnet} = 0.72 ± 0.24‰. For the estimated metamorphic temperature of 500 °C, these fractionations yield coefficients in the equation Δ = A * 10⁶/T ² (in Kelvin) of A_{glaucophane−garnet} = 0.87 ± 0.15 and A_{omphacite−garnet} = 0.72 ± 0.24. A fractionation of Δ_{glaucophane–actinolite} = 0.94 ± 0.21‰ is measured in metagabbros, and indicates that isotopic equilibrium was established during the metamorphic reaction in which glaucophane formed at the expense of actinolite. The preservation of the isotopic compositions of gabbroic and basaltic oceanic crust and the equilibrium fractionations among minerals shows that high-pressure metamorphism occurred at low water/rock ratios. The isotopic equilibrium is only observed at hand-specimen scale, at an outcrop scale isotopic compositional differences occur among adjacent rocks. This heterogeneity reflects metre-scale compositional variations that developed during hydrothermal alteration by seawater and were subsequently inherited by the high-pressure metamorphic rocks. Received: 4 January 1999 / Accepted: 7 July 1999     

The origin of high δ<Superscript>18</Superscript>O zircons: marbles,megacrysts, and metamorphism

The oxygen isotope ratios (δ¹⁸O) of most igneous zircons range from 5 to 8‰, with 99% of published values from 1345 rocks below 10‰. Metamorphic zircons from quartzite, metapelite, metabasite, and eclogite record δ¹⁸O values from 5 to 17‰, with 99% below 15‰. However, zircons with anomalously high δ¹⁸O, up to 23‰, have been reported in detrital suites; source rocks for these unusual zircons have not been identified. We report data for zircons from Sri Lanka and Myanmar that constrain a metamorphic petrogenesis for anomalously high δ¹⁸O in zircon. A suite of 28 large detrital zircon megacrysts from Mogok (Myanmar) analyzed by laser fluorination yields δ¹⁸O from 9.4 to 25.5‰. The U–Pb standard, CZ3, a large detrital zircon megacryst from Sri Lanka, yields δ¹⁸O = 15.4 ± 0.1‰ (2 SE) by ion microprobe. A euhedral unzoned zircon in a thin section of Sri Lanka granulite facies calcite marble yields δ¹⁸O = 19.4‰ by ion microprobe and confirms a metamorphic petrogenesis of zircon in marble. Small oxygen isotope fractionations between zircon and most minerals require a high δ¹⁸O source for the high δ¹⁸O zircons. Predicted equilibrium values of Δ¹⁸O(calcite-zircon) = 2–3‰ from 800 to 600°C show that metamorphic zircon crystallizing in a high δ¹⁸O marble will have high δ¹⁸O. The high δ¹⁸O zircons (>15‰) from both Sri Lanka and Mogok overlap the values of primary marine carbonates, and marbles are known detrital gemstone sources in both localities. The high δ¹⁸O zircons are thus metamorphic; the 15–25‰ zircon values are consistent with a marble origin in a rock-dominated system (i.e., low fluid_(external)/rock); the lower δ¹⁸O zircon values (9–15‰) are consistent with an origin in an external fluid-dominated system, such as skarn derived from marble, although many non-metasomatized marbles also fall in this range of δ¹⁸O. High δ¹⁸O (>15‰) and the absence of zoning can thus be used as a tracer to identify a marble source for high δ¹⁸O detrital zircons; this recognition can aid provenance studies in complex metamorphic terranes where age determinations alone may not allow discrimination of coeval source rocks. Metamorphic zircon megacrysts have not been reported previously and appear to be associated with high-grade marble. Identification of high δ¹⁸O zircons can also aid geochronology studies that seek to date high-grade metamorphic events due to the ability to distinguish metamorphic from detrital zircons in marble.     

A fluid inclusion and stable isotope study of 200 Ma of fluid evolution in the Galway Granite, Connemara, Ireland

Fluid inclusions in granite quartz and three generations of veins indicate that three fluids have affected the Caledonian Galway Granite. These fluids were examined by petrography, microthermometry, chlorite thermometry, fluid chemistry and stable isotope studies. The earliest fluid was a H₂O-CO₂-NaCl fluid of moderate salinity (4–10 wt% NaCl eq.) that deposited late-magmatic molybdenite mineralised quartz veins (V₁) and formed the earliest secondary inclusions in granite quartz. This fluid is more abundant in the west of the batholith, corresponding to a decrease in emplacement depth. Within veins, and to the east, this fluid was trapped homogeneously, but in granite quartz in the west it unmixed at 305–390 °C and 0.7–1.8 kbar. Homogeneous quartz δ¹⁸O across the batholith (9.5 ± 0.4‰n = 12) suggests V₁ precipitation at high temperatures (perhaps 600 °C) and pressures (1–3 kbar) from magmatic fluids. Microthermometric data for V₁ indicate lower temperatures, suggesting inclusion volumes re-equilibrated during cooling. The second fluid was a H₂O-NaCl-KCl, low-moderate salinity (0–10 wt% NaCl eq.), moderate temperature (270–340 °C), high δD (−18 ± 2‰), low δ¹⁸O (0.5–2.0‰) fluid of meteoric origin. This fluid penetrated the batholith via quartz veins (V₂) which infill faults active during post-consolidation uplift of the batholith. It forms the most common inclusion type in granite quartz throughout the batholith and is responsible for widespread retrograde alteration involving chloritization of biotite and hornblende, sericitization and saussuritization of plagioclase, and reddening of K-feldspar. The salinity was generated by fluid-rock interactions within the granite. Within granite quartz this fluid was trapped at 0.5–2.3 kbar, having become overpressured. This fluid probably infiltrated the Granite in a meteoric-convection system during cooling after intrusion, but a later age cannot be ruled out. The final fluid to enter the Granite and its host rocks was a H₂O-NaCl-CaCl₂-KCl fluid with variable salinity (8–28 wt% NaCl eq.), temperature (125–205 °C), δD (−17 to −45‰), δ¹⁸O (−3 to + 1.2‰), δ¹³C_CO2 (−19 to 0‰) and δ³⁴S_sulphate (13–23‰) that deposited veins containing quartz, fluorite, calcite, barite, galena, chalcopyrite sphalerite and pyrite (V₃). Correlations of salinity, temperature, δD and δ¹⁸O are interpreted as the result of mixing of two fluid end-members, one a high-δD (−17 to −8‰), moderate-δ¹⁸O (1.2–2.5‰), high-δ¹³C_CO2 (> −4‰), low-δ³⁴S_sulphate (13‰), high-temperature (205–230 °C), moderate-salinity (8–12 wt% NaCl eq.) fluid, the other a low-δD (−61 to −45‰), low-δ¹⁸O (−5.4 to −3‰), low-δ¹³C (<−10‰), high-δ³⁴S_sulphate (20–23‰) low-temperature (80–125 °C), high-salinity (21–28 wt% NaCl eq.) fluid. Geochronological evidence suggests V₃ veins are late Triassic; the high-δD end-member is interpreted as a contemporaneous surface fluid, probably mixed meteoric water and evaporated seawater and/or dissolved evaporites, whereas the low-δD end-member is interpreted as a basinal brine derived from the adjacent Carboniferous sequence. This study demonstrates that the Galway Granite was a locus for repeated fluid events for a variety of reasons; from expulsion of magmatic fluids during the final stages of crystallisation, through a meteoric convection system, probably driven by waning magmatic heat, to much later mineralisation, concentrated in its vicinity due to thermal, tectonic and compositional properties of granite batholiths which encourage mineralisation long after magmatic heat has abated. Received: 3 April 1996 / Accepted: 5 May 1997     

Mineralogical, fluid inclusion, and stable isotope constraints on mechanisms of ore deposition at the Samgwang mine (Republic of Korea)—a mesothermal, vein-hosted gold–silver deposit

The Samgwang mine is located in the Cheongyang gold district (Cheonan Metallogenic Province) of the Republic of Korea. It consists of eight massive, gold-bearing quartz veins that filled NE- and NW-striking fractures along fault zones in Precambrian granitic gneiss of the Gyeonggi massif. Their mineralogy and paragenesis allow two separate vein-forming episodes to be recognized, temporally separated by a major faulting event. The ore minerals occur in quartz and calcite of stage I, associated with fracturing and healing of veins. Hydrothermal wall-rock alteration minerals of stage I include Fe-rich chlorite (Fe/(Fe+Mg) ratios 0.74-0.81), muscovite, illite, K-feldspar, and minor arsenopyrite, pyrite, and carbonates. Sulfide minerals deposited along with electrum during this stage include arsenopyrite, pyrite, pyrrhotite, sphalerite, marcasite, chalcopyrite, galena, argentite, pyrargyrite, and argentian tetrahedrite. Only calcite was deposited during stage II. Fluid inclusions in quartz contain three main types of C–O–H fluids: CO₂-rich, CO₂–H₂O, and aqueous inclusions. Quartz veins related to early sulfides in stage I were deposited from H₂O–NaCl–CO₂ fluids (1,500–5,000 bar, average 3,200) with T _htotal values of 200°C to 383°C and salinities less than about 7 wt.% NaCl equiv. Late sulfide deposition was related to H₂O–NaCl fluids (140–1,300 bar, average 700) with T _htotal values of 110°C to 385°C and salinities less than about 11 wt.% NaCl equiv. These fluids either evolved through immiscibility of H₂O–NaCl–CO₂ fluids as a result of a decrease in fluid pressure, or through mixing with deeply circulated meteoric waters as a result of uplift or unloading during mineralization, or both. Measured and calculated sulfur isotope compositions (δ³⁴S_H2S = 1.5 to 4.8‰) of hydrothermal fluids from the stage I quartz veins indicate that ore sulfur was derived mainly from a magmatic source. The calculated and measured oxygen and hydrogen isotope compositions (δ¹⁸O_H2O = −5.9‰ to 10.9‰, δD = −102‰ to −87‰) of the ore-forming fluids indicate that the fluids were derived from magmatic sources and evolved by mixing with local meteoric water by limited water–rock exchange and by partly degassing in uplift zones during mineralization. While most features of the Samgwang mine are consistent with classification as an orogenic gold deposit, isotopic and fluid chemistry indicate that the veins were genetically related to intrusions emplaced during the Jurassic to Cretaceous Daebo orogeny.     

The role of the grain boundary at chemical and isotopic fronts in marble during contact metamorphism

Carbon and oxygen isotopic profiles around a low pressure metasomatic wollastonite reaction front in a marble of the Hida metamorphic terrain, central Japan, display typical metamorphic fluid-enhanced isotopic zonations. Isotopic profiles obtained from detailed microscale analyses perpendicular to the chemical reaction front in calcite marble show that diffusion-enhanced isotopic exchange may control these profiles. Carbon and oxygen isotopic behaviour in grain boundaries is remarkably different. Oxygen isotopic troughs (¹⁸O depleted rims) around the calcite-grain boundaries are widely observed in this contact aureole, demonstrating that diffusion of oxygen in calcite grain boundary dominates over lattice diffusion in calcite. In contrast, no difference is observed in carbon isotopic profiles obtained from grain cores and rims. There is thus no specific role of the grain boundary for diffusion of carbonic species in the metamorphic fluid during transportation. Carbon chemical species such as CO₂ and CO₃ ions in metamorphic fluid migrate mainly through lattice diffusion. The carbon and oxygen isotope profiles may be modelled by diffusion into a semi-infinite medium. Empirically lattice diffusion of oxygen isotopes is almost six times faster than that of carbon isotopes, and oxygen grain-boundary diffusion is ten times faster than oxygen lattice diffusion. Oxygen isotopic results around the wollastonite vein indicate that migration of the metamorphic fluid into calcite marble was small and was parallel to the aquifer. From the stability of wollastonite and the attainment of oxygen isotopic equilibrium, we suggest that diffusion of oxygen occurred through an aqueous fluid phase. The timescale of formation of the oxygen isotopic profile around the wollastonite vein is calculated to be about 0.76 × 10⁶ years using the experimentally determined diffusion constant. Received: 14 January 1997 / Accepted: 23 April 1998     

A fluid inclusion and isotopic study of an intrusion-related gold deposit (IRGD) setting in the 380 Ma South Mountain Batholith,Nova Scotia,Canada: evidence for multiple fluid reservoirs

A set of sheeted quartz veins cutting 380 Ma monzogranite at Sandwich Point, Nova Scotia, Canada, provide an opportunity to address issues regarding fluid reservoirs and genesis of intrusion-related gold deposits. The quartz veins, locally with arsenopyrite (≤5%) and elevated Au–(Bi–Sb–Cu–Zn), occur within the reduced South Mountain Batholith, which also has other zones of anomalous gold enrichment. The host granite intruded (P = 3.5 kbars) Lower Paleozoic metaturbiditic rocks of the Meguma Supergroup, well known for orogenic vein gold mineralization. Relevant field observations include the following: (1) the granite contains pegmatite segregations and is cut by aplitic dykes and zones (≤1–2 m) of spaced fracture cleavage; (2) sheeted veins containing coarse, comb-textured quartz extend into a pegmatite zone; (3) arsenopyrite-bearing greisens dominated by F-rich muscovite occur adjacent the quartz veins; and (4) vein and greisen formation is consistent with Riedel shear geometry. Although these features suggest a magmatic origin for the vein-forming fluids, geochemical studies indicate a more complex origin. Vein quartz contains two types of aqueous fluid inclusion assemblages (FIA). Type 1 is a low-salinity (≤3 wt.% equivalent NaCl) with minor CO₂ (≤2 mol%) and has T _h = 280–340°C. In contrast, type 2 is a high-salinity (20–25 wt.% equivalent NaCl), Ca-rich fluid with T _h = 160–200°C. Pressure-corrected fluid inclusion data reflect expulsion of a magmatic fluid near the granite solidus (650°C) that cooled and mixed with a lower temperature (400°C), wall rock equilibrated, Ca-rich fluid. Evidence for fluid unmixing, an important process in some intrusion-related gold deposit settings, is lacking. Stable isotopic (O, D, S) analyses for quartz, muscovite and arsenopyrite samples from vein and greisens indicate the following: (1) δ¹⁸O_qtz = +11.7‰ to 17.8‰ and δ¹⁸O_musc = +10.7‰ to +11.2‰; (2) δD_musc = −44‰ to−54‰; and (3) δ³⁴S_aspy = +7.8‰ to +10.3‰. These data are interpreted, in conjunction with fluid inclusion data, to reflect contamination of a magmatic-derived fluid (d¹⁸O_H2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≤ +10‰) by an external fluid (d¹⁸O_H2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≥ +15‰), the latter having equilibrated with the surrounding metasedimentary rocks. The δ³⁴S data are inconsistent with a direct igneous source based on other studies for the host intrusion (d¹⁸O_H2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  = +5‰) and are, instead, consistent with an external reservoir for sulphur based on δ³⁴S_H2S data for the surrounding metasedimentary rocks. Divergent fluid reservoirs are also supported by analyses of Pb isotopes for pegmatitic K-feldspar and vein arsenopyrite. Collectively the data indicate that the vein- and greisen-forming fluids had a complex origin and reflect both magmatic and non-magmatic reservoirs. Thus, although the geological setting suggests a magmatic origin, the geochemical data indicate involvement of multiple reservoirs. These results suggest multiple reservoirs for this intrusion-related gold deposit setting and caution against interpreting the genesis of intrusion-related gold deposit mineralization in somewhat analogous settings based on a limited geochemical data set.     

Controls on the mechanisms of fluid infiltration and front advection during regional metamorphism: a stable isotope and textural study of retrograde Dalradian rocks of the SW Scottish Highlands

Vein-controlled retrograde infiltration of H₂O-CO₂ fluids into Dalradian epidote amphibolite facies rocks of the SW Scottish Highlands under greenschist facies conditions resulted in alteration of calcite-rich marble bands to dolomite and spatially associated ¹⁸O enrichment of about 10%. on a scale of metres. Fluid inclusion data indicate that the retrograde fluid was an H₂O-salt mixture with a low CO₂ content, and that the temperature of the fluid was about 400d? C. Detailed petrographic and textural (backscattered electron imaging) studies at one garnet-grade locality show that advection of fluid into marbles proceeded by a calcite-calcite grain edge flow mechanism, while alteration of non-carbonate wall-rock is associated with veinlets and microcracks. Stable isotopic analysis of carbonates from marble bands provides evidence for advection of isotopic fronts through carbonate wall-rocks perpendicular to dolomite veins, and fluid fluxes in the range 2.4–28.6 m³/m² have been computed from measured advection distances. Coincidence of isotope and reaction fronts is considered to result from reaction-enhanced kinetics of isotope exchange at the reaction front. Front advection distances are related to the proportion of calcite to quartz in each marble band, with the largest advection distance occurring in nearly pure calcite matrix. This relationship indicates that fluid flow in carbonates is only possible along fluid-calcite-calcite grain edges. However, experimental constraints on dihedral angles in calcite-fluid systems require that pervasive infiltration occurred in response to calcite dissolution initiated at calcite-calcite grain junctions rather than to an open calcite pore geometry. The regional extent of the retrograde infiltration event has been documented from the high δ¹⁸O of dolomite-ankerite carbonates from veins and host-rocks over an area of least 50 × 50 km in the SW Scottish Highlands. Isotopically exotic ¹⁸O-rich retrograde fluids have moved rapidly upwards through the crust, inducing isotopic exchange and mineral reaction in wall-rocks only where lithology, pore geometry or mineral solubilities, pressure and temperature have been appropriate for pervasive infiltration to occur.     

Stable isotope characterisation of co-existing carbonates from the Holocene Gallocanta lake (NE Spain): palaeolimnological implications

The sedimentary succession of Gallocanta lake, a closed saline lake located in the Iberian Range (NE Spain), documents two successive lacustrine stages: (1) brackish lake stage and (2) shallow saline lake stage. The saline stage corresponds to the present-day situation in which the lake water properties are mainly controlled by a strongly negative annual water balance. The carbonates of the brackish lake stage have relatively constant δ¹⁸O values, however, they are rather high (δ¹⁸O_Do = 2.4‰ and δ¹⁸O_Cc = 4.5‰ mean values) suggesting a hydrologically closed lake with a long residence time of the waters. δ¹⁸O values of carbonates from the saline stage vary greatly, and are lighter than in the previous stage (δ¹⁸O_Do = 0.5‰, δ¹⁸O_Cc = −0.7‰, δ¹⁸O_Mgs = −2.3‰ mean values). These carbonates also precipitated in a hydrologically closed lake, but in equilibrium with a lake water of more variable isotopic composition. The δ¹³C values for carbonates of both stages reflect a mixing of different pools of carbon, but during saline stage δ¹³C values have been more controlled by the equilibrium of the lake waters with atmospheric CO₂. During the current stage, calcite and dolomite precipitate in Gallocanta lake mainly during spring and summer, although dolomite precipitation is more favoured towards the summer. Magnesite precipitates at the beginning of autumn, when the first rainfall re-dissolves the saline surface crust, producing saline waters with a high Mg²⁺ content. The isotopic composition of lake waters sampled in 2005 are far higher than those calculated from the carbonates. It is considered that this could be due to two factors: either because there have not been many extremely dry years (like the year 2005) during the development of the lake, or because the physical and chemical characteristics of the lake waters in such conditions are not appropriate for the development of these minerals.     

Sulphur, carbon and oxygen isotope studies of early Variscan mineralisation and Pb-Sb vein deposits in the Cornubian orefield: implications for the scale of fluid movements during Variscan deformation

The strongly deformed Middle Devonian-Lower Carboniferous metasedimentary-volcanic successions of the Trevone Basin (SW England) contain stratiform and Pb-Sb vein deposits that reveal a wide variation in δ³⁴S and δ¹³C, reflecting mineral deposition during diagenesis, regional metamorphism and basin inversion. Pre-Variscan metasedimentary sulphide (δ³⁴S=−33.7 to −26.7‰) and metabasite sulphide (δ³⁴S=+4.0 to +10.8‰) suggest two accessible source reservoirs for sulphur which were available for Sb-As-(Au) and Pb-Zn-(Ag) mineralisation (δ³⁴S=−3.3 to −15.0‰) during late Variscan semiductile-brittle shear. On the basis of pressure-corrected fluid inclusion temperatures, the calculated composition of fluid sulphur reveals an enrichment in δ³⁴S_H2S in the individual vein parageneses and depletion of the fluid sulphur reservoir during evolution of the vein systems. Carbonates in the same veins are partly contemporaneous with Pb-Sb mineralisation and late tensional deformation; their isotopic composition (δ¹³C=−3.2 and −13.4‰) appears strongly influenced by the host formation. Fluid inclusions in post-tensional quartz show a marked reduction in CO₂, suggesting that episodes of CO₂ degassing in response to punctuated reductions in pressure during uplift and brittle deformation was an important mechanism for vein carbonation. An origin for the Pb-Sb mineralisation involving local remobilisation of sulphur from the mixed metasedimentary-volcanic succession is probably inseparable from processes connected with Variscan metamorphism and deformation. Although the N Cornish Variscan deformation is part of a spatially large-scale event, the isotopic evidence suggests compartmentalisation of sulphur and carbon isotope features and short distances between sources and sinks. Received: 15 August 1998 / Accepted: 8 October 1999     

Erratum to: Iron isotope variations in spinel peridotite xenoliths from North China Craton: implications for mantle metasomatism

Iron isotopes, together with mineral elemental compositions of spinel peridotite xenoliths and clinopyroxenites from Hannuoba and Hebi Cenozoic alkaline basalts, were analyzed to investigate iron isotopic features of the lithospheric mantle beneath the North China Craton. The results show that the Hannuoba spinel peridotite xenoliths have small but distinguishable Fe isotopic variations. Overall variations in δ⁵⁷Fe are in a range of −0.25 to 0.14‰ for olivine, −0.17 to 0.17‰ for orthopyroxene, −0.21 to 0.27‰ for clinopyroxene, and −0.16 to 0.26‰ for spinel, respectively. Clinopyroxene has the heaviest iron isotopic ratio and olivine the lightest within individual sample. No clear linear relationships between the mineral pairs on “δ-δ” plot suggest that iron isotopes of mineral separates analyzed have been affected largely by some open system processes. The broadly negative correlations between mineral iron isotopes and metasomatic indexes such as spinel Cr#, (La/Yb)_N ratios of clinopyroxenes suggest that iron isotopic variations in different minerals and peridotites were probably produced by mantle metasomatism. The Hebi phlogopite-bearing lherzolite, which is significantly modified by metasomatic events, appears to be much heavier isotopically than clinopyroxene-poor lherzolite. This study further confirms previous conclusions that the lithospheric mantle has distinguishable and heterogeneous iron isotopic variations at the xenoliths scale. Mantle metasomatism is the most likely cause for the iron isotope variations in mantle peridotites.     

Isotope geochemistry of ore fluids for the Dongsheng sandstone-type uranium deposit, China

The Dongsheng sandstone-type uranium deposit is one of the large-sized sandstone-type uranium deposits discovered in the northern part of the Ordos Basin of China in recent years. Geochemical characteristics of the Dongsheng uranium deposit are significantly different from those of the typical interlayered oxidized sandstone-type uranium ore deposits in the region of Middle Asia. Fluid inclusion studies of the uranium deposit showed that the uranium ore-forming temperatures are within the range of 150–160℃. Their 3He/4He ratios are within the range of 0.02–1.00 R/Ra, about 5–40 times those of the crust. Their 40Ar/36Ar ratios vary from 584 to 1243, much higher than the values of atmospheric argon. The δ18OH2O and δD values of fluid inclusions from the uranium deposit are -3.0‰– -8.75‰ and -55.8‰– -71.3‰, respectively, reflecting the characteristics of mixed fluid of meteoric water and magmatic water. The δ18OH2O and δD values of kaolinite layer at the bottom of the uranium ore deposit are 6.1‰ and -77‰, respectively, showing the characteristics of magmatic water. The δ13CV-PDB and δ18OH2O values of calcite veins in uranium ores are -8.0‰ and 5.76‰, respectively, showing the characteristics of mantle source. Geochemical characteristics of fluid inclusions indicated that the ore-formation fluid for the Dongsheng uranium deposit was a mixed fluid of meteoric water and deep-source fluid from the crust. It was proposed that the Jurassic-Cretaceous U-rich metamorphic rocks and granites widespread in the northern uplift area of the Ordos Basin had been weathered and denudated and the ore-forming elements, mainly uranium, were transported by meteoric waters to the Dongsheng region, where uranium ores were formed. Tectonothermal events and magmatic activities in the Ordos Basin during the Mesozoic made fluids in the deep interior and oil/gas at shallow levels upwarp along the fault zone and activated fractures, filling into U-bearing clastic sandstones, thus providing necessary energy for the formation of uranium ores.     

Origin of the Rubian carbonate-hosted magnesite deposit, Galicia, NW Spain: mineralogical, REE, fluid inclusion and isotope evidence

The Rubian magnesite deposit (West Asturian—Leonese Zone, Iberian Variscan belt) is hosted by a 100-m-thick folded and metamorphosed Lower Cambrian carbonate/siliciclastic metasedimentary sequence—the Cándana Limestone Formation. It comprises upper (20-m thickness) and lower (17-m thickness) lens-shaped ore bodies separated by 55 m of slates and micaceous schists. The main (lower) magnesite ore body comprises a package of magnesite beds with dolomite-rich intercalations, sandwiched between slates and micaceous schists. In the upper ore body, the magnesite beds are thinner (centimetre scale mainly) and occur between slate beds. Mafic dolerite dykes intrude the mineralisation. The mineralisation passes eastwards into sequence of bedded dolostone (Buxan) and laminated to banded calcitic marble (Mao). These show significant Variscan extensional shearing or fold-related deformation, whereas neither Rubian dolomite nor magnesite show evidence of tectonic disturbance. This suggests that the dolomitisation and magnesite formation postdate the main Variscan deformation. In addition, the morphology of magnesite crystals and primary fluid inclusions indicate that magnesite is a neoformed hydrothermal mineral. Magnesite contains irregularly distributed dolomite inclusions (<50 μm) and these are interpreted as relics of a metasomatically replaced dolostone precursor. The total rare earth element (REE) contents of magnesite are very similar to those of Buxan dolostone but are depleted in light rare earth elements (LREE); heavy rare earth element concentrations are comparable. However, magnesite REE chondrite normalised profiles lack any characteristic anomaly indicative of marine environment. Compared with Mao calcite, magnesite is distinct in terms of both REE concentrations and patterns. Fluid inclusion studies show that the mineralising fluids were MgCl₂–NaCl–CaCl₂–H₂O aqueous brines exhibiting highly variable salinities (3.3 to 29.5 wt.% salts). This may be the result of a combination of fluid mixing, migration of pulses of variable-salinity brines and/or local dissolution and replacement processes of the host dolostone. Fluid inclusion data and comparison with other N Iberian dolostone-hosted metasomatic deposits suggest that Rubian magnesite probably formed at temperatures between 160 and 200°C. This corresponds, at hydrostatic pressure (500 bar), to a depth of formation of ~~5 km. Mineralisation-related Rubian dolomite yields δ ¹⁸O values (δ ¹⁸O: 12.0–15.4‰, mean: 14.4±1.1‰) depleted by around 5‰ compared with barren Buxan dolomite (δ ¹⁸O: 17.1–20.2‰, mean: 19.4±1.0‰). This was interpreted to reflect an influx of ¹⁸O-depleted waters accompanied by a temperature increase in a fluid-dominated system. Overlapping calculated δ ¹⁸O_fluid values (~+5‰ at 200°C) for fluids in equilibrium with Rubian dolomite and magnesite show that they were formed by the same hydrothermal system at different temperatures. In terms of δ ¹³C values, Rubian dolomite (δ ¹³C: −1.4 to 1.9‰, mean: 0.4±1.3‰) and magnesite (δ ¹³C: −2.3 to 2.4‰, mean: 0.60±1.0‰) generally exhibit more negative δ ¹³C values compared with Buxan dolomite (δ ¹³C: −0.2 to 1.9‰, mean: 0.8±0.6‰) and Mao calcite (δ ¹³C: −0.3 to 1.5‰, mean: 0.6±0.6‰), indicating progressive modification to lower δ ¹³C values through interaction with hydrothermal fluids. ⁸⁷Sr/⁸⁶Sr ratios, calculated at 290 Ma, vary from 0.70849 to 0.70976 for the Mao calcite and from 0.70538 to 0.70880 for the Buxan dolostone. The ⁸⁷Sr/⁸⁶Sr ratios in Rubian magnesite are more radiogenic and range from 0.71123 to 0.71494. The combined δ ¹⁸O–δ ¹³C and ⁸⁷Sr/⁸⁶Sr data indicate that the magnesite-related fluids were modified basinal brines that have reacted and equilibrated with intercalated siliciclastic rocks. Magnesite formation is genetically linked to regional hydrothermal dolomitisation associated with lithospheric delamination, late-Variscan high heat flow and extensional tectonics in the NW Iberian Belt. A comparison with genetic models for the Puebla de Lillo talc deposits suggests that the formation of hydrothermal replacive magnesite at Rubian resulted from a metasomatic column with magnesite forming at higher fluid/rock ratios than dolomite. In this study, magnesite generation took place via the local reaction of hydrothermal dolostone with the same hydrothermal fluids in very high permeability zones at high fluid/rock ratios (e.g. faults). It was also possibly aided by additional heat from intrusive dykes or sub-cropping igneous bodies. This would locally raise isotherms enabling a transition from the dolomite stability field to that of magnesite.Editorial handling: F. Tornos     

Origin of ultramafic-hosted magnesite on Margarita Island,Venezuela

Ultramafic-hosted deposits of magnesite (MgCO₃) have been studied on Margarita Island, Venezuela, to elucidate the source of carbon and conditions of formation for this type of ore. Petrographic, mineralogic, and δ¹⁸O data indicate that magnesite precipitated on Margarita in near-surface environments at low P and T. δ¹³C ranges from −9 to −16‰ PDB within the magnesite and −8 to −10‰ PDB within some calcite and dolomite elsewhere on the island. The isotopically light dolomite fills karst and the calcite occurs as stock-work veins which resemble the magnesite deposits. These carbon isotopic ratios are consistent with a deep-seated source rather than an overlying source from a zone of surficial weathering. However, there is not much enrichment of precious metals and no enrichment of heavy rare-earth elements, as would be expected if the carbon had migrated upward as aqueous carbonate ions. The carbon probably has risen as a gaseous mixture of CO₂ and CH₄ which partially dissolved in near-surface water before leaching cations and precipitating as magnesite and other carbonates. The process probably is ongoing, given regional exhalation of carbonaceous gases.