A method for coupled arch dam‐foundation‐reservoir seismic behaviour analysis

This paper presents a method for coupled arch dam–foundation–reservoir seismic behaviour analysis. The dam is discretized by finite elements (FE) and the foundation and reservoir are discretized by boundary elements (BE). The opening of contraction joints and the spatial variability of the seismic action is taken into account. The study of Pacoima dam by this method is also presented. The computed results show that no cracks were to be expected due to the vibrations induced during the Feb. 9, 1971 San Fernando earthquake. Copyright © 2000 John Wiley & Sons, Ltd.     

Modal analysis of a DAM–Foundation system based on an FE–BE method in the time domain

A modal analysis procedure based on an FE–BE method in the time domain is first formulated and then applied to a dam–foundation system. In the application, horizontal and vertical impulsive responses are calculated for the system having six different impedance ratios. Modal characteristics such as natural frequencies, damping ratios and mode shapes are evaluated from the Fourier spectra of the responses. The proposed procedure allows analysis of not only the underdamped but also the overdamped modes. According to the analysis, the radiation damping pertinent to the vertical vibration is half of that pertinent to the horizontal vibration and the interaction effect on the modes is not negligibly small when the impedance ratio exceeds 0·3.     

A continuum damage concrete model for earthquake analysis of concrete gravity dam–reservoir systems

In this study, the earthquake damage response of the concrete gravity dams is investigated with considering the effects of dam–reservoir interaction. A continuum damage model which is a second-order tensor and includes the strain softening behavior is selected for the concrete material. The mesh-dependent hardening technique is adopted such that the fracture energy dissipated is not affected by the finite element mesh size. The dynamic equilibrium equations of motion are solved by using the improved form of the HHT-α time integration algorithm. Two dimensional seismic analysis of Koyna gravity dam is performed by using the 1967 Koyna earthquake records. The effects of damage on the earthquake response of concrete gravity dams are discussed. Comparison of the Westergaard and Lagrangian dam–reservoir interaction solutions is made. The effects of viscous damping ratio on the damage response of the dam are also studied.     

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.     

Three-dimensional dynamic soil–structure interaction analysis in the time domain

A new numerical procedure is proposed for the analysis of three-dimensional dynamic soil–structure interaction in the time domain. In this study, the soil is modelled as a linear elastic solid, however, the methods developed can be adapted to include the effects of soil non-linearities and hysteretic damping in the soil. A substructure method, in which the unbounded soil is modelled by the scaled boundary finite-element method, is used and the structure is modelled by 8–21 variable-number-node three-dimensional isoparametric or subparametric hexahedral curvilinear elements. Approximations in both time and space, which lead to efficient schemes for calculation of the acceleration unit-impulse response matrix, are proposed for the scaled boundary finite-element method resulting in significant reduction in computational effort with little loss of accuracy. The approximations also lead to a very efficient scheme for evaluation of convolution integrals in the calculation of soil–structure interaction forces. The approximations proposed in this paper are also applicable to the boundary element method. These approximations result in an improvement over current methods. A three-dimensional Dynamic Soil–Structure Interaction Analysis program (DSSIA-3D) is developed, and seismic excitations (S-waves, P-waves, and surface waves) and externally applied transient loadings can be considered in analysis. The computer program developed can be used in the analysis of three-dimensional dynamic soil–structure interaction as well as in the analysis of wave scattering and diffraction by three-dimensional surface irregularities. The scattering and diffraction of seismic waves (P-, S-, and Rayleigh waves) by various three-dimensional surface irregularities are studied in detail, and the numerical results obtained are in good agreement with those given by other authors. Numerical studies show that the new procedure is suitable and very efficient for problems which involve low frequencies of interest for earthquake engineering. Copyright © 1999 John Wiley & Sons Ltd     

Non-linear dynamic earth dam–foundation interaction using a BE–FE method

A general, rigorous, coupled Boundary Element–Finite Element (BE–FE) formulation is presented for non-linear seismic soil–structure interaction in two dimensions. The BE–FE method is applied to investigate the inelastic response of earth dams to transient SV waves. The dam body, consisting of heterogeneous materials modelled with a simple non-linear hysteretic model, is discretized with finite elements, whereas the elastic half-space is discretized with boundary elements. The study focuses on the combined effects of the material non-linearity and foundation flexibility. The results show the significant effect of the foundation flexibility in reducing the response through radiation of energy. For excitations with peak ground accelerations from 0·2gto 0·6g, the crest acceleration amplification ranges from 2·5 to 1·4 and seems to be comparable with field observations and results from other studies. Deamplification increasing with strain is reported at the lower part of the dam. The method is computationally powerful and can be used for efficient non-linear analysis of complex soil–structure systems. The efficiency of the BE–FE method allows further improvements with incorporation of a more advanced constitutive model and consideration of the generation and dissipation of pore-water pressures during the earthquake. © 1998 John Wiley & Sons, Ltd.     

Direct finite element method for nonlinear analysis of semi‐unbounded dam–water–foundation rock systems

A direct finite element method is presented for nonlinear earthquake analysis of interacting dam–water–foundation rock systems. The analysis procedure applies viscous damper absorbing boundaries to truncate the semi‐unbounded fluid and foundation‐rock domains and specifies at these boundaries effective earthquake forces determined from the design ground motion defined at a control point on the free surface. The analysis procedure is validated numerically by computing the frequency response functions and transient response of an idealized dam–water–foundation rock system and comparing with results from the substructure method. Because the analysis procedure is applicable to nonlinear systems, it allows for modeling of concrete cracking, as well as sliding and separation at construction joints, lift joints, and at concrete–rock interfaces. Implementation of the procedure is facilitated by commercial finite element software with nonlinear material models that permit modeling of viscous damper boundaries and specification of effective earthquake forces at these boundaries. Copyright © 2017 John Wiley & Sons, Ltd.     

Nonlinear earthquake analysis of high arch dam–water–foundation rock systems

A nonlinear finite element model for earthquake response analysis of arch dam–water–foundation rock systems is proposed in this paper. The model includes dynamic dam–water and dam–foundation rock interactions, the opening of contraction joints, the radiation damping of semi‐unbounded foundation rock, the compressibility of impounded water, and the upstream energy propagating along the semi‐unbounded reservoir. Meanwhile, a new equivalent force scheme is suggested to achieve free‐field input in the model. The effects of the earthquake input mechanism, joint opening, water compressibility, and radiation damping on the earthquake response of the Ertan arch dam (240 m high) in China are investigated using the proposed model. The results show that these factors significantly affect the earthquake response of the Ertan arch dam. Such factors should therefore be considered in the earthquake response analysis and earthquake safety evaluation of high arch dams. Copyright © 2011 John Wiley & Sons, Ltd.     

A discontinuous Galerkin method for seismic soil–structure interaction analysis in the time domain

A technique for modeling transient wave propagation in unbounded media is extended and applied to seismic soil–structure interaction analysis in the time domain. The technique, based on the discontinuous Galerkin method, requires lower computational cost and less storage than the boundary element method, and the time‐stepping scheme resulting from Newmark's method in conjunction with the technique is unconditionally stable, allowing for efficient and robust time‐domain computations. To extend the technique to cases characterized by seismic excitation, the free‐field motion is used to compute effective forces, which are introduced on the boundary of the computational domain containing the structure and the soil in the vicinity of the structure. A numerical example on a dam–foundation system subjected to seismic excitation demonstrates the performance of the method. Copyright © 2003 John Wiley & Sons, Ltd.     

A hybrid analysis method for linear dynamic soil-structure interaction in time and frequency domain

IntroductionThe analysis of dynamic soil-structure interaction for important engineering project is still based on linear model (including equivalent linear model) with complex damping, and traditional frequency domain method (Lysmer, et al, 1975, 1981; DING, et al, 1999). Namely, first calculating frequency domain solution by Fourier transform, and then calculating time domain solution by Fourier inverse transform. The motion equation of a system in frequency domain is usually written as (…     

三维土-结构动力相互作用体系分析的两步时域显式波动有限元过程

为减少直接分析三维大尺度复杂土-结构动力相互作用问题的计算量,提高计算效率,本文直接从波动方程出发,提出了较常规子结构法更简单的两步简化计算过程,即第一步简化上部复杂结构体系为集中质量杆系模型,并求基础处等效输入,第二步通过等效输入求上部结构各位置的动力反应.其中第一步计算主要采用集中质量显式有限单元法结合局部透射人工...     

Direct finite element method for nonlinear earthquake analysis of 3‐dimensional semi‐unbounded dam–water–foundation rock systems

A direct finite element method for nonlinear earthquake analysis of 2‐dimensional dam–water–foundation rock systems has recently been presented. The analysis procedure uses standard viscous‐damper absorbing boundaries to model the semi‐unbounded foundation‐rock and fluid domains and specifies the seismic input as effective earthquake forces at these boundaries. Presented in this paper is a generalization of the direct finite element method with viscous‐damper boundaries to 3‐dimensional dam–water–foundation rock systems. Step‐by‐step procedures for determining the effective earthquake forces starting from a ground motion specified at a control point on the foundation‐rock surface is developed, and several numerical examples are computed and compared with independent benchmark solutions to demonstrate the effectiveness of the analysis procedure for modeling 3‐dimensional systems.     

Influence of time-domain dam–reservoir interaction on cracking of concrete gravity DAMS

Based on a non-linear dam-reservoir interaction model, a study investigating the earthquake response of concrete gravity dams is presented. For the propagation of cracks in unreinforced mass concrete, a discrete crack approach formulation based on the finite element method is applied. A special crack element is used to follow a fictitious crack in order to account for a zone of microcracks developing at the crack tip. The reservoir is modelled using the boundary element method. At a fictitious boundary dividing the irregular finite part of the reservoir from the regular infinite part, the loss of energy due to pressure waves moving away towards infinity is taken into account rigorously. Analyses are performed on the tallest non-overflow monolith of the Pine Flat Dam located in Kern County, California. The interaction of a dam, which may exhibit cracks in mass concrete, with a reservoir domain of arbitrary geometry extending to infinity is studied. Some main parameters are investigated. The importance of tools capable of handling the non-linear dam-reservoir interaction is emphasized.     

Earthquake analysis of arch dams including dam–water interaction,reservoir boundary absorption and foundation flexibility

The available substructure method and computer program for the steady-state, harmonic response analysis of arch dams, including the hydrodynamic effects, are extended to consider flexibility of the foundation rock and to include Fourier synthesis of harmonic responses to obtain the earthquake response of arch dams. By efficient evaluation of hydrodynamic terms, interpolation of frequency response functions and more efficient computer programming, the computational costs for analysing arch dams have been reduced by an order of magnitude relative to the available procedure.     

A coupling model of FE–BE–IE–IBE for non-linear layered soil–structure interactions

A coupling model of Finite Elements (FEs), Boundary Elements (BEs), Infinite Elements (IEs) and Infinite Boundary Elements (IBEs) is presented for analysis of soil–structure interaction (SSI). The radiation effects of the infinite layered soil are taken into account by FE–IE coupling, while the underlying bed rock half-space is discretized into BE–IBE coupling whereby the non-horizontal bed rock surface can be accounted for. Displacement compatabilities are satisfied for all types of aforementioned elements. The equivalent linear approach is employed for approximation of nonlinearity of the near field soil. This model has some advantages over the current SSI program in considering the bed rock half-space and non-vertical wave incidence from the far field. Examples of verification demonstrate the applicability and accuracy of the method when compared with the FLUSH program. Finally, the effects of the relative modulus ratio E_r/E_s of rock and soil and the incident angles of non-vertical waves on the responses of the structure and the soil are examined. Copyright © 1999 John Wiley & Sons, Ltd.     

System parameters of soil foundations for time domain dynamic analysis

Soil-structure interaction analysis is usually carried out in the frequency domain, because the compliance functions of the half-space are known only in the frequency domain. Since non-linear analysis cannot be carried out in the frequency domain, a system with frequency independent parameters is used to represent the half-space soil medium so that a nonlinear analysis in the time domain becomes possible. The objective of this paper is to propose a system with lumped parameters, which are independent of frequency, to represent the half-space soil medium. The proposed frequency independent system consists of a number of real discrete structure elements; thus the existing dynamic analysis programs may be adoptable with little modification. In this paper, the parameters are found by minimizing the sum of the squares of deviations between the steady-state responses of the theoretical half-space model and those of the lumped parameter system over a specified frequency range. Once the parameters have been found, the lumped parameter system can be used in practical applications for time domain dynamic analysis of either linear or non-linear structures. In comparison with the dynamic response of the theoretical half-space model, the lumped parameter system yields satisfactory results.     

Non-linear soil–structure interaction analysis based on the boundary-element method in time domain with application to embedded foundation

The various boundary-element methods, well established in the frequency domain, are developed in the time domain for a foundation embedded in a layered halfspace. They are the weighted-residual technique and the indirect boundary-element method, based on a weighted-residual equation, and the direct boundary-element method based on a reciprocity equation, both equations involving time and space. In the indirect approach, formulating the weighted-residual equation over the last time step only results in the truncated indirect boundary-element formulation which requires a reduced computational effort. In all cases, convolution integrals occur. The truncated indirect boundary-element method leads to a highly reliable algorithm, as is verified when a linear analysis in the time domain is compared to the corresponding one in the frequency domain. This boundary-element formulation, which is non-local in space and time, represents a rigorous generally applicable method taking into account a layered halfspace in a non-linear soil-structure interaction analysis. As an example, the non-linear soil-structure interaction analysis of a structure embedded in a halfspace with partial uplift of the basemat and separation of the side wall is investigated.     

A hybrid time frequency domain formulation for non-linear soil–structure interaction

Methods that combine frequency and time domain techniques offer an attractive alternative for solving Soil–Structure-interaction problems where the structure exhibits non-linear behaviour. In the hybrid-frequency-time-domain procedure a reference linear system is solved in the frequency domain and the difference between the actual restoring forces and those in the linear model are treated as pseudo-forces. In the solution scheme explored in this paper, designated as the hybrid-time-frequency-domain (HTFD) procedure, the equations of motion are solved in the time domain with due consideration for non-linearities and with the unbounded medium represented by frequency-independent springs and dampers. The frequency dependency of the impedance coefficients is introduced by means of pseudo-forces evaluated in the frequency domain at the end of each iteration. A criterion of stability for the HTFD approach is derived analytically and its validity is sustained numerically. As is often the case, the criterion takes the form of a limit of unity on the spectral radius of an appropriately defined matrix. Inspection of the terms in this matrix shows that convergence can be guaranteed by suitable selection of the reference impedance. The CPU times required to obtain converged solutions with the HTFD are found, in a number of numerical simulations, to be up to one order of magnitude less than those required by the alternative hybrid-frequency-time-domain approach. © 1998 John Wiley & Sons, Ltd.     

Lanczos method for dynamic analysis of damped structural systems

In this paper we extend the Lanczos algorithm for the dynamic analysis of structures⁷ to systems with general matrix coefficients. The equations of dynamic equilibrium are first transformed to a system of first order differential equations. Then the unsymmetric Lanczos method is used to generate two sets of vectors. These vectors are used in a method of weighted residuals to reduce the equations of motion to a small unsymmetric tridiagonal system. The algorithm is further simplified for systems of equations with symmetric matrices. By appropriate choice of the starting vectors we obtain an implementation of the Lanczos method that is remarkably close to that in Reference 7, but generalized to the case with indefinite matrix coefficients. This simplification eliminates one of the sets of vectors generated by the unsymmetric Lanczos method and results in a symmetric tridiagonal, but indefinite, system. We identify the difficulties that may arise when this implementation is applied to problems with symmetric indefinite matrices such as vibration of structures with velocity feedback control forces which lead to symmetric damping matrices. This approach is used to evaluate the vibration response of a damped beam problem and a space mast structure with symmetric damping matrix arising from velocity feedback control forces. In both problems, accurate solutions were obtained with as few as 20 Lanczos vectors.