Stacked fluvial and tide-dominated estuarine deposits in high-frequency (fourth-order) sequences of the Eocene Central Basin, Spitsbergen

Eighteen coastal-plain depositional sequences that can be correlated to shallow- to deep-water clinoforms in the Eocene Central Basin of Spitsbergen were studied in 1 × 15 km scale mountainside exposures. The overall mud-prone (>300 m thick) coastal-plain succession is divided by prominent fluvial erosion surfaces into vertically stacked depositional sequences, 7–44 m thick. The erosion surfaces are overlain by fluvial conglomerates and coarse-grained sandstones. The fluvial deposits show tidal influence at their seaward ends. The fluvial deposits pass upwards into macrotidal tide-dominated estuarine deposits, with coarse-grained river-dominated facies followed further seawards by high- and low-sinuosity tidal channels, upper-flow-regime tidal flats, and tidal sand bar facies associations. Laterally, marginal sandy to muddy tidal flat and marsh deposits occur. The fluvial/estuarine sequences are interpreted as having accumulated as a series of incised valley fills because: (i) the basal fluvial erosion surfaces, with at least 16 m of local erosional relief, are regional incisions; (ii) the basal fluvial deposits exhibit a significant basinward facies shift; (iii) the regional erosion surfaces can be correlated with rooted horizons in the interfluve areas; and (iv) the estuarine deposits onlap the valley walls in a landward direction. The coastal-plain deposits represent the topset to clinoforms that formed during progradational infilling of the Eocene Central Basin. Despite large-scale progradation, the sequences are volumetrically dominated by lowstand fluvial deposits and especially by transgressive estuarine deposits. The transgressive deposits are overlain by highstand units in only about 30% of the sequences. The depositional system remained an estuary even during highstand conditions, as evidenced by the continued bedload convergence in the inner-estuarine tidal channels.     

中国河口三角洲地区晚第四纪下切河谷层序特征和形成*

应用800多口钻孔及文献资料,讨论了中国沿海滦河扇三角洲、长江三角洲和珠江三角洲及钱塘江河口湾4个地区的下切河谷体系,这些皆为丰沙河流形成的河口三角洲。这些河口三角洲地区的下切河谷为长形或扇形,长数十至数百千米,宽数十千米,深40～90 m。河口三角洲地区的下切河谷相序可分为4种类型,即FS-Ⅰ,FS-Ⅱ,FS-Ⅲ和FS-Ⅵ。可以将这4类相序自海向陆排成一个理想序列：FS-Ⅰ位于海岸线附近,FS-Ⅳ位于河口三角洲的顶部,显示海的影响逐渐减弱,陆相作用逐渐增强。下切河谷层序可分为海侵和海退序列。海侵序列的厚度占下切河谷层序的50％以上,体积占60％～70％。海侵序列是在海平面上升过程中,溯源堆积依次叠置而成的,其下部的河床相是在溯源堆积能到达、而涨潮流未能到达的下游河段产生的,往往不含海相微体化石和潮汐沉积构造。在海侵序列中未见区域上可对比的侵蚀面,表明冰后期海平面上升速率的变化、甚至小幅下降也未留下统一的侵蚀记录。下切河谷中的海退序列由河口湾充填及三角洲进积而成,其进程是各不相同的：长江古河口湾先被强潮河口湾相、后由三角洲相所充填,河口湾也经历了由强潮型向中潮型的转变;滦河扇三角洲和珠江三角洲,其古河口湾则被河流相和三角洲相所充填;钱塘江河口湾正被强潮河口湾相所充填。     

Late Quaternary valley-fill succession of the Lower Tagus Valley, Portugal

The Lower Tagus Valley in Portugal contains a well-developed valley-fill succession covering the complete Late Pleistocene and Holocene periods. As large-scale stratigraphic and chronologic frameworks of the Lower Tagus Valley are not yet available, this paper describes facies, facies distribution, and sedimentary architecture of the late Quaternary valley fill. Twenty four radiocarbon ages provide a detailed chronological framework. Local factors affected the nature and architecture of the incised valley-fill succession. The valley is confined by pre-Holocene deposits and is connected with a narrow continental shelf. This configuration facilitated deep incision, which prevented large-scale marine flooding and erosion. Consequently a thick lowstand systems tract has been preserved. The unusually thick lowstand systems tract was probably formed in a previously (30,000–20,000 cal BP) incised narrow valley, when relative sea-level fall was maximal. The lowstand deposits were preserved due to subsequent rapid early Holocene relative sea-level rise and transgression, when tidal and marine environments migrated inland (transgressive systems tract). A constant sea level in the middle to late Holocene, and continuous fluvial sediment supply, caused rapid bayhead delta progradation (highstand systems tract). This study shows that the late Quaternary evolution of the Lower Tagus Valley is determined by a narrow continental shelf and deep glacial incision, rapid post-glacial relative sea-level rise, a wave-protected setting, and large fluvial sediment supply.     

Early Miocene lacustrine deposits and sequence stratigraphy of the Ermenek Basin,Central Taurides,Turkey

The lacustrine Ermenek Basin evolved as a SE-trending intramontane graben affected by strike–slip deformation, with the initial two lakes merging into one and receiving sediment mainly through fan deltas sourced from the basin's southern margin. The northern margin was a high-relief rocky coast with a wave-dominated shoreline. The Early Miocene lacustrine sedimentation was terminated by a late Burdigalian marine invasion that drowned the basin and its surroundings. The lacustrine basin-fill succession is up to 300 m thick and best exposed along the southern margin, where it consists of four sequences bounded by surfaces of forced regression. The offshore architecture of each sequence shows a thin lowstand tract of shoreface sandstones overlain by a thick transgressive systems tract of mudstones interbedded with sandy tempestites and delta-derived turbidites, which form a set of coarsening-upward parasequences representing minor normal regressions. The corresponding nearshore sequence architecture includes a thick lowstand tract of alluvial-fan deposits overlain by either a well-developed transgressive systems tract (backstepping parasequence set or single fan-deltaic parasequence) and poorly preserved highstand tract; or a thin transgressive tract (commonly limited to flooding surface) and a well-developed highstand tract (thick fan-deltaic parasequence). The sequences are poorly recognizable along the northern margin, where steep shoreline trajectory rendered the nearshore system little responsive to lake-level changes. The resolution of local stratigraphic record thus depends strongly upon coastal morphology and the character of the depositional systems involved.The sequential organization of the basin-fill succession reflects syndepositional tectonics and climate fluctuations, whereas the lateral variation in sequence architecture is due to the localized sediment supply (deltaic vs. nondeltaic shoreline), varied coastal topography and differential subsidence. The study points to important differences in the sequence stratigraphy of lacustrine and marine basins, related to the controlling factors. A crucial role in lacustrine basin is played by climate, which controls both the lake water volume and the catchment sediment yield. Consequently, the effects of tectonics and the dynamics of changes in accommodation and sediment supply in a lacustrine basin are different than in marine basins.     

Sequence stratigraphic evolution of the syn-rift Early Cretaceous sediments,West Beni Suef Basin,the Western Desert of Egypt with remarks on its hydrocarbon accumulations

The Beni Suef Basin is a petroliferous rift basin straddling the River Nile containing a thick Mesozoic–Paleogene succession. The Kharita Formation is formed in the syn-rift phase of the basin formation and is subdivided into the Lower and Upper Kharita members. These two members are regarded as two third-order depositional sequences (DSQ-1 and DSQ-2). The lowstand systems tract (LST-1) of the DSQ-1 is represented by thick amalgamated sandstone bodies deposited by active braided channels. Mid-Albian tectonic subsidence led to a short-lived marine invasion which produced coastal marine and inner-shelf facies belts during an ensuing transgressive systems tract (TST-1). At the end of the mid-Albian, a phase of tectonic uplift gradually rose the continent creating a fall in relative sea level, resulting in deposition of shallow marine and estuarine facies belts during a highstand systems tract (HST-1). During the Late Albian, a new phase of land-rejuvenation commenced, with a prolonged phase of fluvial depositional. Fluvial deposits consisted of belts of amalgamated, vertically aggraded sandstones interpreted as braided and moderately sinuous channels, in the lower part of the Upper Kharita Member lowstand stage (LST-2). The continuous basin filling, coupled with significant lowering in the surrounding highlands changed the drainage regime into a wide belt of meandering river depositing the transgressive stage (TST-2). The history of the Kharita Formation finalized with a Cenomanian marine transgressive phase. Economically, the TST-1 and HST-1 play a significant role as source rocks for hydrocarbon accumulations, whereas LST-2 act as good reservoir rocks in the Early Cretaceous in the Basin.     

Sharp-based, tide-dominated deltas of the Sego Sandstone, Book Cliffs, Utah, USA

The lower part of the Cretaceous Sego Sandstone Member of the Mancos Shale in east‐central Utah contains three 10‐ to 20‐m thick layers of tide‐deposited sandstone arranged in a forward‐ and then backward‐stepping stacking pattern. Each layer of tidal sandstone formed during an episode of shoreline regression and transgression, and offshore wave‐influenced marine deposits separating these layers formed after subsequent shoreline transgression and marine ravinement. Detailed facies architecture studies of these deposits suggest sandstone layers formed on broad tide‐influenced river deltas during a time of fluctuating relative sea‐level. Shale‐dominated offshore marine deposits gradually shoal and become more sandstone‐rich upward to the base of a tidal sandstone layer. The tidal sandstones have sharp erosional bases that formed as falling relative sea‐level allowed tides to scour offshore marine deposits. The tidal sandstones were deposited as ebb migrating tidal bars aggraded on delta fronts. Most delta top deposits were stripped during transgression. Where the distal edge of a deltaic sandstone is exposed, a sharp‐based stack of tidal bar deposits successively fines upward recording a landward shift in deposition after maximum lowstand. Where more proximal parts of a deltaic‐sandstone are exposed, a sharp‐based upward‐coarsening succession of late highstand tidal bar deposits is locally cut by fluvial valleys, or tide‐eroded estuaries, formed during relative sea‐level lowstand or early stages of a subsequent transgression. Estuary fills are highly variable, reflecting local depositional processes and variable rates of sediment supply along the coastline. Lateral juxtaposition of regressive deltaic deposits and incised transgressive estuarine fills produced marked facies changes in sandstone layers along strike. Estuarine fills cut into the forward‐stepped deltaic sandstone tend to be more deeply incised and richer in sandstone than those cut into the backward‐stepped deltaic sandstone. Tidal currents strongly influenced deposition during both forced regression and subsequent transgression of shorelines. This contrasts with sandstones in similar basinal settings elsewhere, which have been interpreted as tidally influenced only in transgressive parts of depositional successions.     

Allogenic and autogenic controls on facies and stratigraphic architecture of the Lower Jurassic Mashabba Formation,Gebel Al-Maghara,North Sinai,Egypt

The Lower Jurassic Mashabba Formation crops out in the core of the doubly plunging Al-Maghara anticline, North Sinai, Egypt. It represents a marine to terrestrial succession deposited within a rift basin associated with the opening of the Neotethys. Despite being one of the best and the only exposed Lower Jurassic strata in Egypt, its sedimentological and sequence stratigraphic framework has not been addressed yet. The formation is subdivided informally into a lower and upper member with different depositional settings and sequence stratigraphic framework. The sedimentary facies of the lower member include shallow-marine, fluvial, tidal flat and incised valley fill deposits. In contrast, the upper member consists of strata with limited lateral extension including fossiliferous lagoonal limestones alternating with burrowed deltaic sandstones. The lower member contains three incomplete sequences (SQ1-SQ3). The depositional framework shows transgressive middle shoreface to offshore transition deposits sharply overlain by forced regressive upper shoreface sandstones (SQ1), lowstand fluvial to transgressive tidal flat and shallow subtidal sandy limestones (SQ2), and lowstand to transgressive incised valley fills and shallow subtidal sandy limestones (SQ3). In contrast, the upper member consists of eight coarsening-up depositional cycles bounded by marine flooding surfaces. The cycles are classified as carbonate-dominated, siliciclastic-dominated, and mixed siliciclastic-carbonate. The strata record rapid changes in accommodation space. The unpredictable facies stacking pattern, the remarkable rapid facies changes, and chaotic stratigraphic architecture suggest an interplay between allogenic and autogenic processes. Particularly syndepositional tectonic pulses and occasional eustatic sea-level changes controlled the rate and trends of accommodation space, the shoreline morphology, the amount and direction of siliciclastic sediment input and rapid switching and abandonment of delta systems.     

Upper Cretaceous marine‐continental transition (Leonese Area,NW Spain) defined from integrated outcrop and seismic stratigraphy

The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd.     

Sedimentary response to Late Quaternary sea-level changes in the Romagna coastal plain (northern Italy)

Data from 17 continuously cored boreholes, 40–170 m deep, reveal the subsurface stratigraphy of the Romagna coastal plain. Sedimentological and microfaunal data allow the distinction of eight facies associations of Late Pleistocene–Holocene age, including 18 lithofacies and 16 faunal associations. Ten ¹⁴C dates provide the basis to establish a sequence stratigraphic framework for the succession corresponding to the upper part 35 ky BP of the last glacio-eustatic cycle. The eight facies associations can be grouped into lowstand, transgressive and highstand systems tracts. The upper part of the lowstand systems tract consists of alluvial plain deposits. These accumulated during the Late Pleistocene when the shoreline was ≈250 km south of its present-day position. A pronounced stratigraphic hiatus (between 25 and 8·8 ky BP) is invariably recorded at the upper boundary (transgressive surface) of these Pleistocene, indurated and locally pedogenized alluvial deposits. The succeeding postglacial history is represented by a well developed transgressive–regressive cycle. Transgressive deposits, interpreted to reflect the rapid landward migration of a barrier–lagoon system, include two wedge-shaped, paralic and marine units. These thicken in opposite directions and are separated by a ravinement surface. Above the transgressive deposits, the maximum flooding surface (MFS) marks the change from a transgressive barrier–lagoon complex to a prograding, wave-dominated delta system (early Po delta). The MFS can be traced landwards, where it constitutes the base of lagoonal deposits. An aggradational to progradational stacking pattern of upper delta plain (marsh), lower delta plain (lagoon/bay), and delta front (beach ridge) deposits reflects the progressive increase in the sediment supply/accommodation ratio during the following highstand. The alluvial deposits capping the sequence accumulated by the 13th century AD, in response to an avulsion event that caused abandonment of the former Po delta lobe and the northward migration of the Po River towards its present position.     

Sedimentary facies and stratigraphic architecture in coarse-grained deltas: Anatomy of the Cenozoic Camaná Formation,southern Peru (16°25′S to 17°15′S)

In the external forearc of southern Peru (Arequipa region), the sedimentary facies and the stratigraphic architecture of the Cenozoic Camaná Formation are presented in the context of tectono-eustatic controls. The Camaná Formation is defined as ∼500 m thick coarse-grained deltaic complex that accumulated in a fault-bounded elongated depression extending from the Coastal Cordillera in the east to the offshore Mollendo Basin in the west and likely up to the Peruvian Trench. Based on the analysis of facies associations, we propose a refined stratigraphic scheme of the Camaná Basin fill. The Camaná Formation was formerly divided into the Camaná “A” and Camaná “B” units (CamA and CamB, respectively). We reinterpret the stratigraphic position and the timing of the CamA to CamB boundary, and define three sub-units for CamA, i.e. sub-units A1, A2, and A3. Each depositional unit shows individual stacking patterns, which are linked with particular shoreline trajectories through time.Strata of A1 form the basal succession of the Camaná Formation and consist of distributary channels and mouth bars, unconformably overlain by beds of A2. A2 consists of delta front deposits arranged in voluminous clinothems that reflect a progradational downstepping complex. A3 consists of delta front sandstones to prodelta siltstones arranged in retrogradational onlapping geometry. A pebbly intercalation in proximal onlapping A3 deposits is interpreted to reflect pulses of uplift in the hinterland. The overlying CamB unit is characterized by a thick alternation of fluvio-deltaic conglomerates and sand bars. The ages of the individual units of the Camaná Formation are not yet well defined. Based on the available information and stratigraphic correlations we tentatively assign A1 to the Late Oligocene, A2 to the Early Miocene, A3 to the late Early Miocene to early Middle Miocene, and CamB to the Late Miocene to? early Pliocene.The sub-units A1 and A2 represent a regressive systems tract, where the shoreline was forced to migrate seaward. This scenario differs from the Early Miocene eustatic sea-level rise suggesting that significant tectonic uplift along the Coastal Cordillera controlled the high sediment influx during A2 deposition. The sub-unit A3 represents a transgressive systems tract, triggering landward migration of the shoreline. This scenario is well in line with the global sea-level chart suggesting that A3 has been deposited during a phase of eustatic sea-level rise with minor tectonic activity. The fluvial deposits of CamB reflect an increased sediment flux due to uplift of the hinterland. The observed stratigraphic patterns support predominant tectonic control on sedimentation in the Camaná Basin and the established stratigraphic framework provides an essential baseline for future correlations of the Cenozoic sedimentation in the forearc area of the Central Andes.     

Sequence stratigraphic framework for mixed aeolian,peritidal and marine environments: Insights from the Pennsylvanian subtropical record of Western Pangaea

Due to difficulties in correlating aeolian deposits with coeval marine facies, sequence stratigraphic interpretations for arid coastal successions are debated and lack a unifying model. The Pennsylvanian record of northern Wyoming, USA, consisting of mixed siliciclastic–carbonate sequences deposited in arid, subtropical conditions, provides an ideal opportunity to study linkages between such environments. Detailed facies models and sequence stratigraphic frameworks were developed for the Ranchester Limestone Member (Amsden Formation) and Tensleep Formation by integrating data from 16 measured sections across the eastern side of the Bighorn Basin with new conodont biostratigraphic data. The basal Ranchester Limestone Member consists of dolomite interbedded with thin shale layers, interpreted to represent alternating deposition in shallow marine (fossiliferous dolomite) and supratidal (cherty dolomite) settings, interspersed with periods of exposure (pedogenically modified dolomites and shales). The upper Ranchester Limestone Member consists of purple shales, siltstones, dolomicrites and bimodally cross‐bedded sandstones in the northern part of the basin, interpreted as deposits of mixed siliciclastic–carbonate tidal flats. The Tensleep Formation is characterized by thick (3 to 15 m) aeolian sandstones interbedded with peritidal heteroliths and marine dolomites, indicating cycles of erg accumulation, preservation and flooding. Marine carbonates are unconformably overlain by peritidal deposits and/or aeolian sandstones interpreted as lowstand systems tract deposits. Marine transgression was often accompanied by the generation of sharp supersurfaces. Lags and peritidal heteroliths were deposited during early stages of transgression. Late transgressive systems tract fossiliferous carbonates overlie supersurfaces. Highstand systems tract deposits are lacking, either due to non‐deposition or post‐depositional erosion. The magnitude of inferred relative sea‐level fluctuations (>19 m), estimated by comparison with analogous modern settings, is similar to estimates from coeval palaeotropical records. This study demonstrates that sequence stratigraphic terminology can be extended to coastal ergs interacting with marine environments, and offers insights into the dynamics of subtropical environments.     

Sedimentology,sequence stratigraphy and syn-rift model of younger part of Washtawa Formation and early part of Kanthkot Formation,Wagad, Kachchh basin,Gujarat

The 600 m thick prograding sedimentary succession of Wagad ranging in age from Callovian to Early Kimmeridgian has been divided into three formations namely, Washtawa, Kanthkot and Gamdau. Present study is confined to younger part of the Washtawa Formation and early part of the Kanthkot Formation exposed around Kanthkot, Washtawa, Chitrod and Rapar. The depositional architecture and sedimentation processes of these deposits have been studied applying sequence stratigraphic context. Facies studies have led to identification of five upward stacking facies associations (A, B, C, D, and E) which reflect that deposition was controlled by one single transgressive — regressive cycle. The transgressive deposit is characterized by fining and thinning upward succession of facies consisting of two facies associations: (1) Association A: medium — to coarse-grained calcareous sandstone — mudrocks alternations (2) Association B: fine-grained calcareous sandstone — mudrocks alternations. The top of this association marks maximum flooding surface as identified by bioturbational fabrics and abundance of deep marine fauna (ammonites). Association A is interpreted as high energy transgressive deposit deposited during relative sea level rise. Whereas, facies association B indicates its deposition in low energy marine environment deposited during stand-still period with low supply of sediments. Regressive sedimentary package has been divided into three facies associations consisting of: (1) Association C: gypsiferous mudstone-siltstone/fine sandstone (2) Association D: laminated, medium-grained sandstone — siltstone (3) Association E: well laminated (coarse and fine mode) sandstone interbedded with coarse grained sandstone with trough cross stratification. Regressive succession of facies association C, D and E is interpreted as wave dominated shoreface, foreshore to backshore and dune environment respectively. Sequence stratigraphic concepts have been applied to subdivide these deposits into two genetic sequences: (i) the lower carbonate dominated (25 m) transgressive deposits (TST) include facies association A and B and the upper thick (75m) regressive deposits (HST) include facies association C, D and E. The two sequences are separated by maximum flooding surface (MFS) identified by sudden shift in facies association from B to C. The transgressive facies association A and B represent the sediments deposited during the syn-rift climax followed by regressive sediments comprising association C, D and E deposited during late syn-rift stage.     

Pliocene sedimentation in a shallow, cool-water, estuarine gulf, Murray Basin, South Australia

The Pliocene Norwest Bend Formation is a well‐preserved succession of terrestrial and shallow‐marine deposits in the Murray Basin, South Australia. Sediments in this unit consist of two discrete terrigenous clastic‐rich, decametre‐scale sequences, or informal members, which record episodes of marine incursion during the Early and Late Pliocene respectively. The base of each sequence is a transgressive lag and/or strandline deposit that is transitional upwards into a highstand, subtidal, terrigenous clastic and cool‐water carbonate sediment accumulation. The top of each sequence is incised by fluvial channels that are filled by river deposits which formed as relative sea‐level fell and terrestrial environments prograded basinward. Sedimentological data suggest that gross stratigraphic architecture was primarily determined by glacioeustasy. Differences in sedimentary style between these two sequences, however, reflect a major climatic change that took place in southern Australia during the mid‐Pliocene. The lower quartzose sand member is formed of siliciclastic sediment derived from prolonged, deep, subaerial weathering and contains a bivalve‐dominated, cool‐temperate, open‐marine mollusc assemblage. These sediments accumulated under an equitable, relatively warm, humid climate. The Murray Basin during this time, because of high fluvial discharge, was a salt‐wedge estuary with typical estuarine circulation. In contrast, the upper, oyster‐rich member is typified by large monospecific oyster buildups that grew in restricted coastal environments. Strandline deposits contain a warm‐temperate skeletal assemblage. Contemporaneous aeolian sediments accumulated under warm, semi‐arid climatic conditions. Well‐developed ferricrete, silcrete and calcrete horizons reflect cyclic conditions of rainwater infiltration and evaporation in the seasonally dry climate that typifies southern Australia today. Highly seasonal rainfall produced an estuary that fluctuated annually from being well to partially mixed. These Pliocene sediments support the notion that mollusc‐rich facies are the signature of cool‐water carbonate accumulations in inboard neritic environments. Unlike bryozoans that dominate the outer parts of Cenozoic cool‐water carbonate shelves, molluscs evolved to exploit an array of coastal ecosystems with wide salinity variations and variable sedimentation rates.     

Late-Quaternary paleoenvironmental evolution of Lesina lagoon (southern Italy) from subsurface data

Integrated sedimentological and micropaleontological (foraminifers and ostracods) analyses of two 55 m long borehole cores (S3 and S4) drilled in the subsurface of Lesina lagoon (Gargano promontory—Italy) has yielded a facies distribution characteristic of alluvial, coastal and shallow-marine sediments. Stratigraphic correlation between the two cores, based on strong similarity in facies distribution and AMS radiocarbon dates, indicates a Late Pleistocene to Holocene age of the sedimentary succession.Two main depositional sequences were deposited during the last 60-ky. These sequences display poor preservation of lowstand deposits and record two major transgressive pulses and subsequent sea-level highstands. The older sequence, unconformably overlying a pedogenized alluvial unit, consists of paralic and marine units (dated by AMS radiocarbon at about 45–50,000 years BP) that represent the landward migration of a barrier-lagoon system. These units are separated by a ravinement surface (RS1). Above these tansgressive deposits, highstand deposition is characterised by progradation of the coastal sediments.The younger sequence, overlying an unconformity of tectonic origin, is a 10 m-thick sedimentary body, consisting of fluvial channel sediments overlain by transgressive–regressive deposits of Holocene age. A ravinement surface (RS2), truncating the transgressive (lagoonal and back-barrier) deposits in core S4, indicates shoreface retreat and landward migration of the barrier/lagoon system. The overlying beach, lagoon and alluvial deposits are the result of mid-Holocene highstand sedimentation and coastal progradation.     

Anatomy of an Upper Triassic continental to marginal‐marine system: the mixed siliciclastic–carbonate Travenanzes Formation (Dolomites,Northern Italy)

The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply.     

The Devonian–Lower Carboniferous succession in Northwest Peninsular Malaysia

A new stratigraphic nomenclature is proposed for the approximately 600 m thick, mainly clastic transitional sequence between the underlying Mempelam Limestone and overlying Kubang Pasu/Singa Formation in northwest Peninsular Malaysia. This sequence represents shallow marine deposits of the continental margin of the Sibumasu Terrane during the Middle Palaeozoic (Devonian–Carboniferous). It is separated into several formations. The Timah Tasoh Formation is an approximately 76 m sequence consisting of 40 m of laminated tentaculitid shales at the base, containing Monograptus yukonensis Jackson and Lenz and Nowakia (Turkestanella) acuaria Alberti, giving an Early Devonian (Pragian–Emsian) age, and about 36 m of rhythmically interbedded, light coloured argillo-arenites. The Chepor Formation is about 90 m thick and consists mainly of thick red mudstone interbedded with sandstone beds, of Middle to Late Devonian age. A new limestone unit is recognized and named the Sanai Limestone, which contains conodonts of Famennian age. The Binjal Formation consists of red and white mudstone interbedded with sandstone beds showing Bouma sequences. The Telaga Jatoh Formation is 9 m thick and consists mainly of radiolarian chert. The Wang Kelian Formation is composed of thick red mudstone beds interbedded with silty sandstone, and contain fossils indicative of an Early Carboniferous (Visean) age. The succession was deposited on the outer shelf, with depositional environments vertically fluctuating from prodelta to basinal marine. The Devonian–Carboniferous boundary is exposed at Hutan Aji and Kampung Guar Jentik, and indicates a major regressive event during the latest Devonian.     

准西车排子地区中新生界层序格架及砂体预测模式

前陆盆地由于其独特的构造和沉积背景形成不同的层序地层格架样式.以准噶尔盆地车排子地区为例,详细分析了造山带前缘隆起斜坡带层序样式.在准西车排子地区中新生界主要目的层段(下白垩统吐谷鲁群、古近系安集海河组、新近系沙湾组和塔西河组)充填沉积中识别出5条主要等时界面,据界面的性质和级别划分出一级层序2个,二级层序组3个,三级层序4个.受前陆盆地造山带前缘隆起斜坡带独特的沉积背景及多幕逆冲构造活动作用过程的控制,准西车排子地区中新界各三级层序具有二元沉积结构特征,仅发育低位和湖扩体系域.逆冲挤压期发育低位粗碎屑沉积,应力松弛期发育湖扩细碎屑沉积.低位下切谷、大型扇三角洲和湖扩滩坝砂是准西车排子地区的有利储集砂体及勘探目标.      

Sequence stratigraphy of a Mesozoic carbonate platform-to-basin system in western Sicily

Sequence stratigraphic studies of the Triassic through Paleogene carbonate successions of platform, slope and basin in western Sicily (Palermo and Termini Imerese Mountains) have identified a sedimentary cyclicity mostly caused by relative oscillations of sea level. The stratigraphic successions of the Imerese and Panormide palaeogeographic domains of the southern Tethyan continental margin were studied with physical-stratigraphy and facies analysis to reconstruct the sedimentary evolution of this platform-to-basin system. The Imerese Basin is characterized by a carbonate and siliceous-calcareous succession, 1200–1400m thick, Late Triassic to Eocene in age. The strata display a typical example of a carbonate platform margin, characterized by resedimented facies with progradational stacking patterns. The Panormide Carbonate Platform is characterized by a carbonate succession, 1000–1200 m thick, Late Triassic to Late Eocene, mostly consisting of shallow-water facies with periodic subaerial exposure. The cyclic arrangement has been obtained by the study of the stratigraphic signatures (unconformities, facies sequences, erosional surfaces and stratal geometries) found in the slope successions. The recognized pattern has been compared with coeval facies of the shelf. This correlation provided evidence of sedimentary evolution, influenced by progradation and backstepping of the shelf deposits. The stratigraphic architecture of the platform-to-basin system is characterized by four major transgressive/regressive cycles during the late Triassic to late Eocene. These cycles, framed in a chronostratigraphic chart, allows the correlation of the investigated shelf-to-basin system with the geological evolution of the African continental margin during the Mesozoic, showing tectono-eustatic cycles. The first cycle, encompassing the late Triassic to early Jurassic, appears to be related to the late syn-rift stage of the continental margin evolution. The following three cycles, spanning from the Jurassic to Eocene, can be related to the post-rift evolution and to thermal subsidence changes.     

Formation and Tectonic Evolution of the Pattani Basin,Gulf of Thailand

The stratigraphic and structural evolution of the Pattani Basin, the most prolific petroleum basin in Thailand, reflects the extensional tectonic regime of continental Southeast Asia. E-W extension resulting from the northward collision of India with Eurasia since the Early Tertiary resulted in the formation of a series of N-S-trending sedimentary basins, which include the Pattani Basin. The sedimentary succession in the Pattani Basin is divisible into synrift and post-rift sequences. Deposition of the synrift sequence accompanied rifting and extension, with episodic block faulting and rapid subsidence. The synrift sequence comprises three stratigraphic units: (1) Upper Eocene to Lower Oligocene alluvial-fan, braidedriver, and floodplain deposits; (2) Upper Oligocene to Lower Miocene floodplain and channel deposits; and (3) a Lower Miocene regressive package consisting of marine to nonmarine sediments. Post-rift succession comprises: (1) a Lower to Middle Miocene regressive package of shallow marine sediments through floodplain and channel deposits; (2) an upper Lower Miocene transgressive sequence; and (3) an Upper Miocene to Pleistocene transgressive succession. The post-rift phase is characterized by slower subsidence and decreased sediment influx. The present-day shallow-marine condition in the Gulf of Thailand is the continuation of this latest transgressive phase.

The subsidence and thermal history of the Pattani Basin is consistent with a nonuniform lithospheric-stretching model. The amount of extension as well as surface heat flow generally increases from the margin to the basin center. The crustal stretching factor (β) varies from 1.3 at the basin margin to 2.8 in the center. The subcrustal stretching factor (5) ranges from 1.3 at the basin margin to more than 3.0 in the basin center. The stretching of the lithosphere may have extended the basement rocks by as much as 45 to 90 km and has led to passive upwelling of the aesthenosphere, resulting in high heat flow (1.9 to 2.5 Heat Flow Units [HFU]) and high geothermal gradient (45 to 60° C/km). The validity of nonuniform lithospheric stretching as a mechanism for the formation of the Pattani Basin is confirmed by the good agreement between the level of organic maturation modeled on the basis of the predicted heatflow history and measured vitrinite reflectance at various depths measured in some 30 boreholes.     

Sequence stratigraphy in a mixed carbonate-silicilastic depositional system (Middle Miocene; Styrian Basin,Austria)

The mixed carbonate-siliciclastic Weißenegg (Allo-) Formation records three depositional sequences corresponding approximately to the TB 2.3, TB 2.4 and TB 2.5 global cycles. Sea-level fluctuations were of the order of at least 30 m. Siliciclastic lowstand systems tracts comprise lignite deposits, reworked basement and tidal siltstones (above a tectonically enhanced sequence boundary) as well as coastal sand bars. Coastal sands of the transgressive systems tract contain distinct layers of well cemented nodules. They are interpreted as the first stage in hardground formation and record superimposed minor sea-level fluctuations. Coral patch reefs and rhodolith platforms developed during transgressive phases and were subsequently drowned and/or suffocated by siliciclastics during early highstand. Shallowing upwards siliciclastic parasequences, each terminated by a bank of rhodolith limestone, form the (late) highstand systems tract. The limestone beds record superimposed fourth-order transgressive pulses. Occasionally a carbonate highstand wedge developed. Lowstand carbonate shedding occurred where the top of a platform which suffered incipient drowning during highstand was near sealevel again during the following lowstand. Late highstand delta progradation is common.