Structural characteristics of the Suez rift margins

Field study of the Hadahid Block (the eastern margin of the central half-graben of the Suez rift) indicates two listric normal faults at its eastern and western boundaries, the rift-bounding fault and the Hadahid Fault, respectively. These faults were affected by two episodes of movement. The earlier movement (at the initial, Neogene rift opening) led to equal displacements on the two faults whereas the later movement (at the mid-Clysmic event, l7 Ma ago) caused the Hadahid Fault to bound the deep part of the central half-graben. A similar conclusion is also reached for the western margin of the southern half-graben of the rift (Esh El Mellaha and Zeit Blocks). The two listric faults bounding the margin blocks in these two oppositely tilted half-grabens (Hadahid and Esh El Mellaha Blocks) join at depth into a ramp-flat detachment. This geometry of the rift-bounding faults represents an intermediate stage in the evolution of rift basins. It is preceded by the early rifting stage where extension is less and oppositely tilted half-grabens are formed (e.g. the ancestral Red Sea-Gulf of Suez rift). Increased extension at later stages leads to the prevailance of one system of detachment instead of oppositely dipping detachments of adjacent half-grabens. The central and southern Red Sea have perhaps had this geometry before the onset of seafloor spreading.     

Evidence from the Mesta half-graben, SW Bulgaria, for the Late Eocene beginning of Aegean extension in the Central Balkan Peninsula

The ENE-tilted Mesta half-graben contains a 3-km-thick section of Priabonian (Late Eocene) to Oligocene sedimentary and volcanic rocks that rest unconformably on basement metamorphic rocks along its west side. Basal strata dip 50–60° E and dip at progressively lower angles upward, indicating synrotational deposition. The southern part of the half-graben contains nested volcanic caldera complexes, formed during the deposition of the middle part of the sedimentary sequence, which have been rotated by about half the total rotation of the sedimentary succession. The half-graben is bounded on the east by a fault that steepens from more deeply exposed structural levels in the south (8–18° W) to shallower exposed structural levels in the north (70° W) and together with the rotation of Paleogene strata during deposition indicate the Mesta half-graben is underlain by a listric detachment fault, the Mesta detachment. Subhorizontal Middle Miocene strata that unconformably overlie tilted Paleogene strata yield an upper age limit to the extension. West and northwest of the Mesta half-graben are many other NNW-trending NE-tilted Paleogene half-grabens which we suggest are part of an important extended area in SW Bulgaria and eastern Macedonia that lies above one or more west-dipping detachment faults and date the beginning of Aegean extension in the southern Balkan region as at least as old as Priabonian. The Mesta detachment is oblique to the trend of a contemporaneous Paleogene magmatic arc in the southern Balkans and the origin of the detachment is probably related to gravitationally induced spreading of thickened hot arc crust and Hellenic trench roll back.     

The northern Upper Rhine Graben: basin geometry and early syn-rift tectono-sedimentary evolution

A large-scale transfer zone subdivides the northern parts of the Upper Rhine Graben into a northern and a southern sub-basin. These sub-basins display the geometry of asymmetric half-grabens with opposing tilt directions. The transfer zone connects the western master fault of the northern half-graben with the eastern master fault of the southern half-graben. In the northern Upper Rhine Graben early syn-rift sedimentation (Late Priabonian to Late Rupelian) was controlled by the tectonically induced subsidence of these half-grabens (autogenetic), as well as by regional third-order sea level variations (allogenetic). Within the graben, lateral changes in subsidence rates (in dip and strike direction of fault blocks) controlled the development of accommodation space and thus, sediment thickness and facies. Furthermore, a low-displacement segment along the western border fault acted as a sediment entry point. Tectonics controlled the distribution of early syn-rift deposits and the palaeogeography of the northern Upper Rhine Graben.     

Active tectonics of the Yizre'el valley, Israel, using high-resolution seismic reflection data

We present a series of high-resolution seismic reflection lines across the Yizre'el valley, which is the largest active depression in Israel, off the main trend of the Dead Sea rift. The new seismic reflection data is of excellent quality and shows that the valley is dissected into numerous small blocks, separated by active faults. The Yizre'el valley is found to consist of a series of half grabens, rather than a single half graben, or a symmetrical graben. The faults are generally vertical and appear to have a dominant strike-slip component, but some dip-slip is also evident. A marked zone of compression near Megido is associated with the intersection of the two largest faults in the valley, the Carmel fault and the Gideon fault. Variable trend of the faults reflects the complexity of the local geology along the boundary between the wide NW–SE trending Farah–Carmel fault zone and the E–W trending basins and ranges in the Lower Galilee. This tectonic complexity is likely to result from a highly variable stress pattern, modified by the structures inside it. Normal faulting in the valley occurred at an early stage of its development as a tectonic depression. However, strike-slip motion on the Carmel fault, and possibly also on some of the other faults, appears to have started together with the onset of normal faulting. Earthquake hazard in the area appears to be uniform as faults are distributed throughout the Yizre'el valley.     

Aspects of the structural evolution of the Lusitanian Basin in Portugal and the shelf and slope area offshore Portugal

The study provides a regional seismic interpretation and mapping of the Mesozoic and Cenozoic succession of the Lusitanian Basin and the shelf and slope area off Portugal. The seismic study is compared with previous studies of the Lusitanian Basin. From the Late Triassic to the Cretaceous the study area experienced four rift phases and intermittent periods of tectonic quiescence. The Triassic rifting was concentrated in the central part of the Lusitanian Basin and in the southernmost part of the study area, both as symmetrical grabens and half-grabens. The evolution of half-grabens was particularly prominent in the south. The Triassic fault-controlled subsidence ceased during the latest Late Triassic and was succeeded by regional subsidence during the early Early Jurassic (Hettangian) when deposition of evaporites took place. A second rift phase was initiated in the Early Jurassic, most likely during the Sinemurian–Pliensbachian. This resulted in minor salt movements along the most prominent faults. The second phase was concentrated to the area south of the Nazare Fault Zone and resulted here in the accumulation of a thick Sinemurian–Callovian succession. Following a major hiatus, probably as a result of the opening of the Central Atlantic, resumed deposition occurred during the Late Jurassic. Evidence for Late Jurassic fault-controlled subsidence is widespread over the whole basin. The pattern of Late Jurassic subsidence appears to change across the Nazare Fault Zone. North of the Nazare Fault, fault-controlled subsidence occurred mainly along NNW–SSE-trending faults and to the south of this fault zone a NNE–SSW fault pattern seems to dominate. The Oxfordian rift phase is testified in onlapping of the Oxfordian succession on salt pillows which formed in association with fault activity. The fourth and final rift phase was in the latest Late Jurassic or earliest Early Cretaceous. The Jurassic extensional tectonism resulted in triggering of salt movement and the development of salt structures along fault zones. However, only salt pillow development can be demonstrated. The extensional tectonics ceased during the Early Cretaceous. During most of the Cretaceous, regional subsidence occurred, resulting in the deposition of a uniform Lower and Upper Cretaceous succession. Marked inversion of former normal faults, particularly along NE–SW-trending faults, and development of salt diapirs occurred during the Middle Miocene, probably followed by tectonic pulses during the Late Miocene to present. The inversion was most prominent in the central and southern parts of the study area. In between these two areas affected by structural inversion, fault-controlled subsidence resulted in the formation of the Cenozoic Lower Tagus Basin. Northwest of the Nazare Fault Zone the effect of the compressional tectonic regime quickly dies out and extensional tectonic environment seems to have prevailed. The Miocene compressional stress was mainly oriented NW–SE shifting to more N–S in the southern part.     

Structural controls on the evolution of the Kutai Basin,East Kalimantan

The Kutai Basin formed in the middle Eocene as a result of extension linked to the opening of the Makassar Straits and Philippine Sea. Seismic profiles across the northern margin of the Kutai Basin show inverted middle Eocene half-graben oriented NNE–SSW and N–S. Field observations, geophysical data and computer modelling elucidate the evolution of one such inversion fold. NW–SE and NE–SW trending fractures and vein sets in the Cretaceous basement have been reactivated during the Tertiary. Offset of middle Eocene carbonate horizons and rapid syn-tectonic thickening of Upper Oligocene sediments on seismic sections indicate Late Oligocene extension on NW–SE trending en-echelon extensional faults. Early middle Miocene (N7–N8) inversion was concentrated on east-facing half-graben and asymmetric inversion anticlines are found on both northern and southern margins of the basin. Slicken-fibre measurements indicate a shortening direction oriented 290°–310°. NE–SW faults were reactivated with a dominantly dextral transpressional sense of displacement. Faults oriented NW–SE were reactivated with both sinistral and dextral senses of movement, leading to the offset of fold axes above basement faults. The presence of dominantly WNW vergent thrusts indicates likely compression from the ESE. Initial extension during the middle Eocene was accommodated on NNE–SSW, N–S and NE–SW trending faults. Renewed extension on NW–SE trending faults during the late Oligocene occurred under a different kinematic regime, indicating a rotation of the extension direction by between 45° and 90°. Miocene collisions with the margins of northern and eastern Sundaland triggered the punctuated inversion of the basin. Inversion was concentrated in the weak continental crust underlying both the Kutai Basin and various Tertiary basins in Sulawesi whereas the stronger oceanic crust, or attenuated continental crust, underlying the Makassar Straits, acted as a passive conduit for compressional stresses.     

Geomorphologic,stratigraphic and sedimentologic evidences of tectonic activity in Sone–Ganga alluvial tract in Middle Ganga Plain,India

The basement of the Ganga basin in the Himalayan foreland is criss-crossed by several faults, dividing the basin into several sub-blocks forming horsts, grabens, or half-grabens. Tectonic perturbations along basement faults have affected the fluvial regime and extent of sediment fill in different parts of the basin during Late Quaternary. The East Patna Fault (EPF) and the West Patna Fault (WPF), located in Sone–Ganga alluvial tract in the southern marginal parts of Middle Ganga Plain (MGP), have remained tectonically active. The EPF particularly has acted significantly and influenced in evolving the geomorphological landscape and the stratigraphic architecture of the area. The block bounded by the two faults has earlier been considered as a single entity, constituting a half-graben. The present investigation (by morpho-stratigraphic and sedimentologic means) has revealed the existence of yet another fault within the half-graben, referred to as Bishunpur–Khagaul Fault (BKF). Many of the long profile morphological characters (e.g., knick-zone, low width–depth ratio) of the Sone River at its lower reaches can be ascribed to local structural deformation along BKF. These basement faults in MGP lie parallel to each other in NE–SW direction.     

Structure of the rift basins in the central Gulf of California: Kinematic implications for oblique rifting

We use structural and seismostratigraphic interpretation of multichannel seismic reflection data to understand the structure and kinematic history of the central Gulf of California. Our analysis reveals that oblique strain in the central Gulf formed two tectono–sedimentary domains during distinct deformation stages. The eastern domain, offshore Sonora, is bounded by the East and West Pedro Nolasco faults that may constitute the southernmost segments of the Tiburón Fault System. Within this domain, the dip-slip Yaqui Fault controlled deposition of 3.9 km of sediments in the half-graben Yaqui Basin. The western domain, offshore Baja California, is bounded by the Guaymas Transform Fault, which controlled the accumulation of 1.45 km of sediments within a half-graben that formed the early Guaymas Basin. The tectono–sedimentary activity offshore Sonoran likely ranges from Late Miocene–Pliocene to Late Pliocene time, while activity in the Guaymas Basin commenced in Late Pliocene time. Extinction of the main faults offshore Sonora was nearly coeval to the initiation of the Guaymas Transform Fault. Our results suggest that oblique strain has been accommodated by strain partition since the onset of rifting in the central Gulf. The Guaymas Basin is now a nascent spreading center, but prior to this, it evolved as a half-graben controlled by the Guaymas Transform Fault; such drastic transition is not constrained, but likely occurred during the Pleistocene time and must be localized < 30 km north of the axial troughs. The faults within the central Gulf transpose the Miocene N–S oriented grabens of Basin and Range style preserved onshore in the conjugate rifted margins.     

Kinematic analysis and palaeoseismology of the Edremit Fault Zone: evidence for past earthquakes in the southern branch of the North Anatolian Fault Zone,Biga Peninsula,NW Turkey

The Edremit Fault Zone (EFZ) forms one of the southern segments of the North Anatolian Fault Zone (NAFZ) at the northern margin of the Edremit Gulf (Biga Peninsula, South Marmara Region, Turkey). Stratigraphic, structural and kinematic results indicate that basinward younging of the fault zone, in terms of a rolling-hinge mechanism, has resulted in at least three discrete Miocene to Holocene deformational phases: the oldest one (Phase 1) directly related to the inactive Kazda? Detachment Fault, which was formed under N–S trending pure extension; Phase 2 is characterised by a strike-slip stress condition, probably related to the progression of the NAFZ towards the Edremit area in the Plio–Quaternary; and Phase 3 is represented by the high-angle normal faulting, which is directly interrelated with the last movement of the EFZ. Our palaeoseismic studies on the EFZ revealed the occurrence of three past surface rupture events; the first one occurred before 13178 BC, a penultimate event that may correspond to either the 160 AD or 253 AD historical earthquakes, and the youngest one can be associated with the 6 October 1944 earthquake (M_w = 6.8). These palaeoseismic data indicate that there is no systematic earthquake recurrence period on the EFZ.     

Tectonics and sedimentation in the Fohnsdorf-Seckau Basin (Miocene, Austria): from a pull-apart basin to a half-graben

The Miocene intramontane Fohnsdorf-Seckau Basin is situated at the junction of the sinistral Mur-Mürz-fault system and the dextral Pöls-Lavanttal fault system. The basin comprises a 2,400-m-thick coal-bearing fluviodeltaic-lacustrine succession (Lower to Middle Miocene, Upper Karpatian?/Lower Badenian) which is overlain by a 1,000-m-thick alluvio-deltaic conglomeratic succession (Apfelberg Formation, ?Middle/Upper Badenian) in the south. A three-stage model for the basin evolution has been reconstructed from structural analysis and basin fill geometries. During a first pull-apart phase, subsidence occurred along ENE-trending, sinistral strike-slip faults of the Mur-Mürz fault system and NE-SW to N-S-trending normal faults, forming a composite pull-apart basin between overstepping en-echelon strike-slip faults. The Seckau and Fohnsdorf sub-basins are considered as two adjacent pull-aparts which merged into one basin. During the second phase, N-S to NNW-SSE extension and normal faulting along the southern basin margin fault formed a half-graben, filled by wedge-shaped alluvial strata (Apfelberg Formation). During the third phase, after the end of basin sedimentation, the dextral Pöls-Lavanttal fault system reshaped the western basin margin into a positive flower structure.     

From transpression to transtension: changes in morphology and structure around a bend on the North Anatolian Fault in the Marmara region

The east–west-trending North Anatolian Fault makes a 17° bend in the western Marmara region from a mildly transpressional segment to a strongly transtensional one. We have studied the changes in the morphology and structure around this fault bend using digital elevation models, field structural geology, and multi-channel seismic reflection profiles. The transpression is reflected in the morphology as the Ganos Mountain, a major zone of uplift, 10 km wide and 35 km long, elongated parallel to the transpressional Ganos Fault segment west of this bend. Flat-lying Eocene turbidites of the Thrace Basin are folded upwards against this Ganos Fault, forming a monocline with the Ganos Mountain at its steep southern limb and the flat-lying hinterland farther north at the flat limb. The sharp northern margin of the Ganos Mountain coincides closely with the monoclinal axis. The strike of the bedding, and the minor and regional fold axes in the Eocene turbidites in Ganos Mountain are parallel to the trace of the Ganos Fault indicating that these structures, as well as the morphology, have formed by shortening perpendicular to the North Anatolian Fault. The monoclinal structure of Ganos Mountain implies that the North Anatolian Fault dips under this mountain at 50°, and this ramp terminates at a decollement at a calculated depth of 8 km. East of this fault bend, the northward dip of the North Anatolian Fault is maintained but it has a normal dip-slip component. This has led to the formation of an asymmetric half-graben, the Tekirdağ Basin in the western Sea of Marmara, containing a thickness of up to 2.5 km of Pliocene to Recent syn-transform sediments. As the Ganos uplift is translated eastwards from the transpressional to the transtensional zone, it undergoes subsidence by southward tilting. However, a morphological relic of the Ganos uplift is maintained as the steep northern submarine slope of the Tekirdağ Basin. The minimum of 3.5 km of fault-normal shortening in the Ganos Mountain, and the minimum of 40 km eastward translation of the Ganos uplift indicate that the present fault geometry has existed for at least the last 2 million years.     

辽河盆地东部凹陷北段构造样式形成机制

辽河盆地东部凹陷北段新生代盆地具下断上拗的双层结构,是伸展和走滑联合作用的断陷盆地。通过盆地的几何学、运动学、动力学分析表明:东部凹陷的形成可分为断陷期和拗陷期两个不同的阶段。在断陷期的过程中,伸展及走滑作用的影响程度是不同的。断陷早期以伸展作用为主,中期伸展和走滑联合作用,晚期以走滑作用为主。在这种独特机制作用下,不同时期断陷由不同类型的半地堑组成。断陷阶段早期构造样式主要为非旋转或旋转半地堑;中期主要为滚动半地堑及复式半地堑;晚期主要为走滑半地堑;拗陷是新生代盆地萎缩期的构造样式。不同时期构造样式的研究,实际上再现了构造样式的演化史,同时也是含油气系统成藏动态过程的研究前提。      

阿尔金断裂新生代活动方式及其与柴达木盆地的耦合分析

位于青藏高原北缘的阿尔金左旋走滑断裂是世界上规模最大也是最重要的线性构造之一,其新生代以来的活动方式是限定高原生长机制的重要边界条件.本文在对阿尔金山中不同方向隆起构造进行分析的基础上,综合前人资料论证了阿尔金断裂在晚始新世-中中新世时以基底剪切为主,大规模地表走滑则发生在中中新世以后.对柴达木盆地内近东西向和北西向断裂系统的分布、形态、活动时间进行了详细的分析,发现它们是在不同时间、不同区域、不同控制条件下形成的两套断裂系统,与阿尔金断裂的两阶段活动方式存在很好的耦合关系.柴达木盆地西北侧的沉积和构造特征表明阿尔金山的隆升幅度和范围在中中新世达到最大,随后则逐渐减小,这种变化也与阿尔金断裂从基底剪切到地表走滑的转换非常吻合.     

Basin formation during the post-collisional evolution of the Eastern Alps: the example of the Lavanttal Basin

The Miocene Lavanttal Basin formed in the Eastern Alps during extrusion of crustal blocks towards the east. In contrast to basins, which formed contemporaneously along the strike-slip faults of the Noric Depression and on top of the moving blocks (Styrian Basin), little is known about the Lavanttal Basin. In this paper geophysical, sedimentological, and structural data are used to study structure and evolution of the Lavanttal Basin. The eastern margin of the 2-km-deep basin is formed by the WNW trending Koralm Fault. The geometry of the gently dipping western basin flank shows that the present-day basin is only a remnant of a former significantly larger basin. Late Early (Karpatian) and early Middle Miocene (Badenian) pull-apart phases initiated basin formation and deposition of thick fluvial (Granitztal Beds), lacustrine, and marine (Mühldorf Fm.) sediments. The Mühldorf Fm. represents the Lower Badenian cycle TB2.4. Another flooding event caused brackish environments in late Middle Miocene (Early Sarmatian) time, whereas freshwater environments existed in Late Sarmatian time. The coal-bearing Sarmatian succession is subdivided into four fourth-order sequences. The number of sequences suggests that the effect of tectonic subsidence was overruled by sea-level fluctuations during Sarmatian time. Increased relief energy caused by Early Pannonian pull-apart activity initiated deposition of thick fluvial sediments. The present-day shape of the basin is a result of young (Plio-/Pleistocene) basin inversion. In contrast to the multi-stage Lavanttal Basin, basins along the Noric Depression show a single-stage history. Similarities between the Lavanttal and Styrian basins exist in Early Badenian and Early Sarmatian times.     

大巴山前陆带东段神农架地区构造变形研究

神农架地区位于大巴山前陆弧形构造带东段, 以阳日断裂为界, 可分为北带基底拆离带和南带神农架隆起, 北带以E -W走向的基底拆离和盖层滑脱为特征, 古生界盖层褶皱紧闭; 南带神农架隆起周缘的盖层变形特征各异, 北缘变形较弱, 东缘变形很强, 其西、南周缘发育特征的裙边状褶皱构造, 南缘裙边褶皱以枢纽大角度倾伏为典型特征。古构造应力场反演结果显示, 该区主要受控于近S -N向主压应力作用; 受到神农架、黄陵两个隆起相向对挤作用, 神农架隆起东缘主压应力方向为NW -SE向, 两个不同方向的应力场可能均与早燕山期大巴山强烈的陆内造山作用有关。综合分析和对比结果显示, 大巴山前陆构造带东段的构造演化历史经历了印支雏形期和早燕山定型期两个构造演化阶段, 神农架基底隆起对大巴山前陆弧型构造带的形成起到了限制作用, 神农架地区的构造变形研究对于探讨大巴山前陆弧形带的形成和演化具有重要的指导意义。      

Late Tertiary–Quaternary tectonics of the Southern Apennines (Italy): New evidences from the Tyrrhenian slope

This paper summarises the results of combined structural and geomorphological investigations we carried out in two key areas, in order to obtain new data on the structure and evolution of the Tyrrhenian slope of the southern Apennines. Analysis by a stress inversion method [Angelier, J., 1994. Fault slip analysis and paleostress reconstruction. In: Continental Deformation. P.L. Hancock Ed., Pergamon Press, Oxford, 53–100] of fault slip data from Mesozoic to Quaternary formations allowed the reconstruction of states of stress at different time intervals. By integrating these data with those deriving from the stratigraphic and morphotectonic records, chronology and timing of the sequence of the deformation events was obtained.The tectonic history of the region can be related to four deformation events. Structures related to the first event, that was dominated by a strike-slip regime with a NW–SE oriented σ1 and was active since Mid–Late Miocene, do not significantly affect the present day landscape, as they were strongly displaced and overprinted by subsequent deformation events and/or deleted by erosion. The second and third events, that may be considered as the main responsible for the morphostructural signature of the region, are comparable with the stretching phases recognised offshore and considered to be responsible for the opening and widening of the Tyrrhenian basin. In particular, the second event (with an E–W oriented σ3), took place in the Late Miocene/earliest Pliocene and was first dominated by a strike-slip regime, that was also responsible for thrusting and folding. Since Late Pliocene, it was dominated by an extensional regime that created large vertical offsets along N–S to NW–SE trending faults. The third event, that was dominated by extension with a NW–SE oriented σ3, started in the Early Pleistocene and was responsible for formation of the horst-and-graben structure with NE–SW trend that characterises the Tyrrhenian margin of the southern Apennines. The fourth deformation event, which is characterised by an extensional regime with a NE–SW trending σ3, started in the late Middle Pleistocene and is currently active.     

Along strike changes in the structural evolution over a brittle detachment fault: Example of the Pleistocene Corinth–Patras rift (Greece)

The Patras, Corinth, and northern Saronic gulfs occupy a 200-km-long, N120° trending Pleistocene rift zone, where Peloponnese drifts away from mainland Greece. The axes of Patras and Corinth basins are 25 km apart and linked by two transfer-fault zones trending N040°. The older one defines the western slope of Panachaïkon mountain, and the younger one limits the narrow Rion–Patras littoral plain. Between these two faults, the ca. 4-km-thick Rion–Patras series dips 20–30° SSW. It is part of the Patras gulf synrift deposits, which pile in an asymmetric basin governed by a fault dipping ca. 25–35° NNE, located in the southern Gulf of Patras. Mapping of this fault to the east in northern Peloponnese shows that it is an inactive north-dipping low-angle normal fault (0° to 30°N), called the northern Peloponnese major fault (NPMF). The structural evolution of the NPMF was different in the gulfs of Patras and Corinth. In the Gulf of Patras, it is still active. In northern Peloponnese, footwall uplift and coeval southward tilting flattened the fault and locked its southern part. Steeper normal faults formed north of the locked area, connecting the still active northern part of the NPMF to the surface. After several locks, the presently active normal faults (Psathopyrgos, Aigion, Helike) trend along the southern shore of the Gulf of Corinth. This migration of faults caused the relative 25 km northward shift of the Corinth basin, and the formation of NE–SW trending transfer-faults between the Corinth and Patras gulfs.     

The Thakkhola–Mustang graben in Nepal and the late Cenozoic extension in the Higher Himalayas

The Thakkhola–Mustang graben is located at the northern side of the Dhaulagiri and Annapurna ranges in North Central Nepal. The structural pattern is mainly characterised by the N020–040° Thakkhola Fault system responsible for the development of the half-graben. A detailed study of the substrate and the sedimentary fill in several outcrops indicates polyphased faulting:-pre-sedimentation faulting (Miocene), with a mainly NNW–SSE to N–S compressional stress expressed in the substratum by N020–040° and N180–N010° sinistral and N130–140° dextral conjugate strike-slip faults;-syn-sedimentation faulting (Pliocene–Pleistocene), characterised by a W–E to WNW–ESE extensional stress and tectonic subsidence of the half-graben during the Tetang period (Pliocene probably), followed by a doming of the Tetang deposits and a short period of erosion (cf. Pliocene planation surface and unconformity between the Tetang and Thakkhola Formations); the Thakkhola period (Pleistocene) is characterized by a W–E to WNW–ESE extensional stress and a major subsidence of the half graben;-post-sedimentation recurrent extensional faulting and N–S and NE–SW normal faults in the late Quaternary terrace formations.Geodynamic interpretation of the faulting is discussed in relation to the following:

• 1.the geographic situation of the Thakkhola–Mustang half-graben in the southern part of Tibet and its setting in the Tethyan series above the South Tibetan Detachment System (STDS);
• 2.the geodynamic conditions of the convergence between India and Eurasia and the dextral east–west shearing between the High Himalayas and south Tibet;
• 3.the possible relations between the sinistral Thakkhola and the dextral Karakorum strike-slip faults in a N–S compressional stress regime during the Miocene.

     

阿拉善地块新生代构造作用——兼论阿尔金断裂新生代东向延伸问题

阿拉善地块在新生代的变形是青藏高原北部活动的直接结果,各方面的资料显示这种影响仅发生在中新世中晚期,前的活动性已经很低。阿尔金断裂的延伸并不能穿过阿拉善与南蒙古相关断裂相连,我们的研究更偏重认为阿尔金断裂没有进入阿拉善地区,而是经过金塔—花海盆地南缘的宽滩山—黑山地区与合黎山—龙首山南缘断裂相连,中新世中晚期,由于青藏高原北部重要的构造事件,青藏高原由南向北挤压河西走廊地区,造成了金塔—花海盆地内部由近南北向构造转变为近东西向构造。同时形成北山地区控制上第三系沉积(上新统)的东西向断裂。而阿拉善南缘产生右行走滑运动,地块的北部及内部则产生了近南北向的第三纪伸展构造,这些伸展构造以及金塔—花海盆地第三纪断裂控制的沉积与前人认为的强前陆、弱限制性边界的侧向挤出类似。我们认为阿拉善及蒙古地区中新世—上新世期间,由于受到青藏高原近南北向的挤压,产生区域性的"共轭"断裂系统,由于这些地区早期构造的控制,这些新活动的断裂主要迁就于老构造,以脆性活动为主,在蒙古国形成了沿阿尔泰山的北西—南东向断裂和东南部的北东—南西向"共轭"断裂系统,而阿尔金断裂与合黎山—龙首山南缘断裂则形成南侧的"共轭"断裂系统。北山以及金塔—花海地区则是这两组断裂的交汇地区,挤压作用明显,控制了新生代的沉积,并导致了新生代金塔—花海盆地的形成。阿拉善地块作为夹持在这两组断裂之间的地块,发生了一定程度的向东挤出运动,在其东缘贺兰山西侧形成了新生代的挤压构造,而在其东北缘和西南缘则迁就早期的韧性剪切带分别向北东和南西运动,产生相应的变形。该模型能够合理地解释阿拉善周围地区及其内部中新世以来的变形及其与青藏高原北部构造运动之间的关系。     

Early Miocene stratigraphy of central west Anatolia,Turkey: implications for the tectonic evolution of the eastern Aegean area

Small‐mammalian faunas enable the discrimination and correlation of uppermost Lower Miocene lacustrine sedimentary units in central western Anatolia. On the basis of sequential stratigraphic relationships, early Early Miocene and latest Early Miocene relative ages are suggested for the older lacustrine mass‐flow deposits and younger paper shale units, respectively, which are devoid of age‐diagnostic fossils. In central western Anatolia, the sequential differences between the uppermost Lower Miocene successions delineate a deformation zone of NE–SW‐trending fault blocks separated by vertical faults. This deformation zone, inherited from Late Oligocene tectonics, underwent an early Early Miocene sinistral transtension leading to pull‐aparts that were emplaced by granitoids. Limited extension caused the late Early Miocene repetitive up‐ and down‐wards motions of the fault blocks, with variable magnitudes. This led to contrasting subsidence histories in the relevant basinal system. During the latest Early Miocene, fault blocks coalesced into a regional body characterized by uniform slow subsidence and non‐extensional deformation facies. The general trend of the above tectonic events can be explained by lateral slab segmentation and progressive asthenospheric wedging, in response to NE‐directed and decelerated palaeosubduction in the Aegean. Copyright © 2007 John Wiley & Sons, Ltd.