An Objective Approach to Defining Earthwork Geometries Using Subdecimeter Digital Elevation Models

Alligator Mound, a ca. 800‐year‐old effigy earthwork located in central Ohio, lies within a 2000 m² area on the edge of a steeply sloping bluff. This earthwork, with a maximum local relief of approximately 1.5 m, blends into the underlying natural topography, complicating the extraction of measurements of its geometry. To overcome this limitation, a 5 cm × 5 cm gridded digital elevation model (DEM) of Alligator Mound was developed from 2,534,774 elevation points collected from 11 survey locations using a terrestrial light detection and ranging system. This subdecimeter DEM and a derivative local relief model (LRM) capture the subtle topography at this site so that the natural landscape can be objectively filtered from the earthwork. The resulting geometric data (i.e., perimeter, lengths, area, and volume) are compared with subjective historical depictions of this partially denuded earthwork. The results show the value of subdecimeter scale DEMs and LRMs for characterizing subtle features constructed on complex underlying topographies, and for monitoring and/or mitigating long‐term natural and anthropogenic earthwork degradation.     

Some slope stability problems in soils derived from the Ecca Shales of Natal,South Africa

Shales of the Lower Ecca stage of the Late Palaeozoic Series are actively degrading in the particular topography and climate of Natal. The failure of a large road embankment near Pietermaritzburg and the subsequent failure of the adjacent natural slope were caused by movement along existing shear zones in the underlying colluvium. Other cases of instability in both natural slopes and engineering earthworks are known, in the Pietermaritzburg and Durban areas and elsewhere in Natal. These failures in various types of slope in different parts of Natal suggest an inherent instability in colluvial and residual soil derived from shale of the Lower Ecca stage.     

Patterns in the Landscape and Erosion of Cultural Sites Along the Colorado River Corridor in Grand Canyon,USA

The geologic and geomorphic template of Grand Canyon influences patterns in the archaeological record, including sites where apparent increases in erosion may be related to Glen Canyon Dam. To provide geoarchaeological context for the Colorado River corridor and such issues, we explore first‐order trends in a database of field observations and topographic metrics from 227 cultural sites. The patterns revealed may be expected in other river‐canyon settings of management concern. The spatial clustering of sites along the river follows variations in width of the valley bottom and the occurrence of alluvial terraces and debris fans, linking to bedrock controls. In contrast, the pattern of more Formative (Ancestral Puebloan, 800–1250 A.D.) sites in eastern Grand Canyon and Protohistoric (1250–1776 A.D.) sites in western Grand Canyon does not follow any evident geomorphic trends. In terms of site stability, wider reaches with more terrace and debris fan landforms host a disproportionate number of sites with acute erosion. This links most directly to weak alluvial substrates, and the primary erosion process is gullying with diffusive‐creep processes also pervasive. Although Glen Canyon Dam does not directly influence these erosion processes, overall sediment depletion and the loss of major flooding leaves erosion unhampered along the river corridor.     

Geoarchaeological simulation of meandering river deposits and settlement distributions: A three‐dimensional approach

Fluvial processes have the potential to obscure, expose, or even destroy portions of the archaeological record. Floodplain aggradation can bury and hide archaeological features, whereas actively migrating channels can erode them. The archaeological record preserved in the subsurface of a fluvial system is potentially fragmented and is three‐dimensionally complex, especially when the system has been subjected to successive phases of alluviation and entrenchment. A simulation model is presented to gain insight into the threedimensional subsurface distribution, visibility, and preservation potential of the archaeological record in a meander‐floodplain system as a function of geomorphic history. Simulation results indicate that fluvial cut‐fill cycles can strongly influence the density of archaeological material in the subsurface. Thus, interpretation of floodplain habitation based solely upon features visible in the shallow subsurface (through traditional techniques such as aerial photography and geophysical prospection) can be misleading. In the examples, the loss of archaeological record by channel migration ranges between 45% and 90% over 12,000 years for channel belt‐dominated systems, decreasing to 10 to 30% for rivers where the floodplain width is a multiple of channel belt width. The modeling presented can be used to test excavation strategies in relation to hypothesized scenarios of stratigraphic evolution for archaeological sites. © 2006 Wiley Periodicals, Inc.     

The surface archaeological record in arid Australia: Geomorphic controls on preservation,exposure, and visibility

The conventional approach to assessing the archaeological record in most parts of the world involves a combination of excavation of stratified deposits and extensive survey of surface deposits. Although widely applied in Australia, in both research‐based and management archaeology, the method does not conform well to the nature of the surface archaeological record here. Over much of semi‐arid and arid Australia, archaeological “sites” are, in fact, accretion phenomena that are not easily interpreted as the outcome of short‐term behavioral events. Using results from twelve years of geoarchaeological research in western New South Wales, we demonstrate that there is considerable variability in landsurface age, and hence the “availability” of archaeological surfaces, over relatively short distances. Therefore, it cannot be assumed that stone artifact deposits, for example, that appear to be similar in character are of similar age. Data are also presented that demonstrate that the presence of artifacts on the surface, their apparent absence in sediments buried beneath the surface, and the apparent recent ubiquity of the archaeological record are all a function of geomorphic processes that, at the same time, expose some artifact deposits at the surface and erode and bury others amid large volumes of sediment. Interpreting the surface artifact record within a spatial and temporal geomorphic framework is crucial to understanding the past human behavior that the artifact deposits represent. © 2009 Wiley Periodicals, Inc.     

The application of ground‐penetrating radar to a coastal prehistoric archaeological site,Cape Henlopen,Delaware, USA

Cape Henlopen, Delaware is a coastal spit complex located at the confluence of Delaware Bay and the Atlantic Ocean. This region was occupied by prehistoric peoples throughout the evolution of ancestral Cape Henlopen. A ground‐penetrating radar (GPR) survey was conducted at one of the prehistoric archaeological sites (7S‐D‐30B) located within the Cape Henlopen Archaeological District. The site was in a remote location in the center of a tide dominated back‐barrier marsh. Ground‐penetrating radar waves penetrated to depths of 7 m, and four major sets of reflections were observed. Three sets were interpreted to be GPR images of geomorphic units associated with the spit complex, and the fourth was identified as the GPR image of a shell midden deposit. The GPR survey was used to determine the approximate dimensions of the shell midden, including its depth below ground surface (up to 2.1 m) and horzontal extent (∼250 m²), and to establish the paleoenvironmental setting and antecedent topography of the site prior to occupation. The GPR data suggests that the shell midden was initially deposited upon an aeolian dune surface and the antecedent topography at the site included an up to 1 m deep trough located 5 m to the north of, and trending parallel to, the axis of a present‐day topographic high. This survey illustrates that GPR is a useful, noninvasive, tool that may be implemented at archaeological sites in coastal areas. It provides constraints on the environmental setting and topography of the terrain which prehistoric peoples inhabited, and it can be used in planning excavations at sites in coastal geomorphic settings. © 2000 John Wiley & Sons, Inc.     

Assessing lithologic discontinuities and parent material uniformity within the Texas sandy mantle and implications for archaeological burial and preservation potential in upland settings

Alfisols within the Texas Gulf Coast Plain commonly exhibit textural contrasts between sandy, artifact-bearing A–E horizons (i.e., sandy mantle), and artifact-sterile clay-rich Bt (argillic) horizons. This has invoked debate about parent material uniformity and pedogenic versus geomorphic sandy mantle origins, which has implications for the scientific value of buried archaeological sites. To improve our understanding of archaeological burial in upland settings, we evaluated parent material uniformity within five pedons to distinguish pedogenically derived textural changes from geomorphologically created lithologic discontinuities. Depth trends in clay-free particle size classes and stable/immobile Ti and Zr constituents failed to reveal lithologic discontinuities between the sandy mantle and Bt horizons, and the observed textural differences are interpreted to have resulted from pedogenic processes. This interpretation is supported by clay skins, fine clay increases in Bt horizons, and micromorphological observations. Consequently, artifacts buried in upland summits have likely moved down the soil profile due to biomantle processes. Deep sandy mantle sites, non-parallel contacts between the sandy mantle and Bt horizons, and paleogullies incised into Eocene bedrock are better explained by colluvial/soil creep processes adjacent to summits, where archaeological materials may exhibit preservation potential. No single explanation can account for sandy mantle origins, and we advocate a case-by-case approach.     

Geology of the Murcia Valley and Flood Plain Modifications in the Construction of the Circus Maximus,Rome, Italy

This paper presents a morphological and hydrogeological reconstruction of the Murcia Valley at the location of the great Roman stadium Circus Maximus in Rome. We reconstruct a valley segment using ERT (electrical resistivity tomography) and geoarchaeological drilling data that identified three main layers. The basal layer, with high resistivity values and convex shapes, is correlated to alluvial gravel and lithified silt‐clay sediments. The middle layer shows low‐to‐medium resistivity values extending to concavities between the basal convex shapes. The very low resistivity values of this middle layer characterize elliptical to circular morphologies and have been ascribed to the presence of water‐saturated clay‐silt and peaty sediments. The surface layer is characterized by widespread lateral inhomogeneity interpreted as anthropogenic fill. The data indicate a pre‐Roman anastomosed alluvial plain subsequently modified by human intervention. In an effort to reclaim the valley for construction of the Circus, the Romans utilized the natural topography and created a central embankment, later becoming the Spina, by filling depressions with sand taken from adjacent bars. Our study contributes to (1) knowledge of the pre‐Roman landscape, (2) understanding anthropogenic modification of the Murcia Valley flood plain, and (3) archaeological interpretation of the monument.     

Erosion of archaeological sites: Results and implications of a site simulation model

A computer simulation model has been developed to investigate the postdepositional changes on archaeological sites due to soil erosion in a semiarid (Mediterranean) environment. Both soil matrix and archaeological artifact movement are accounted for by the model. The model is applied to a series of hypothetical site configurations on hillslopes, using archaeological structures, to observe the morphological changes due to slope form. The results show considerable variation in site preservation potential, relating to different initial spatial patterning of the site and initial slope form. The model predicts thresholds for the start of movement by artifacts, and suggests a correlation between the location of deposition and the potential for disturbance of the artifact record. Implications are drawn from the results of the simulations, both in terms of archaeological theory and practice, and in terms of site conservation and management. The simulation method is recognized as a useful tool for the investigation of natural site formation processes. © 1994 John Wiley & Sons, Inc.     

排水措施对黄河堤防淤背体排水效果试验研究

选择水平盲沟、土工席垫及水平和竖向PVC渗管3种排水方案,在黄河山东东明某堤段淤背体冲填施工中进行排水效果试验。通过埋设在淤区内的地下水位观测点,得到淤区内地下水位与时间的变化规律。试验结果表明,采取一定的排水措施能加速淤区土体的固结,但排水效果与排水方案有关;土工席垫排水与水平盲沟排水效果相差不大,且排水效果与淤土厚度有关,3 m左右淤土厚度设置一层水平排水盲沟或土工席垫,其排水效果较好;淤土厚度增加,其排水效果变差;但两者均不能有效防止横向围堤坍塌。采用水平和竖向PVC渗管方案,其排水效果好,特别是设置了竖向PVC渗管,能有效防止横向围堤坍塌。试验成果为黄河放淤固堤工程加速淤背体排水固结设计及施工提供参考。     

Geochronology and Geomorphology of the Pioneer Archaeological Site,Upper Snake River Plain,Idaho, USA

Pioneer is an open‐air, stratified, multicomponent archaeological site located in the upper Snake River Plain of southeastern Idaho, USA. Block excavations provided an opportunity to contribute to the Late Quaternary geomorphic history of the Big Lost River drainage and provide geochronological context of archaeological components at the site. The stratigraphic sequence is interpreted as reflecting multiple depositional episodes and five soil‐formation periods beginning pre‐7200 cal. yr B.P. and lasting to the historic period. The stratigraphic sequence contains an archaeological component dated to ∼3800 cal. yr B.P. and several other components post‐800 cal. yr B.P. Major site formation processes include fluvial deposition and erosion, pedogenesis (accumulation of secondary carbonates), and bioturbation. Periods of increased deposition at Pioneer and elsewhere along the Big Lost River are inferred to have occurred between ∼8400–6500 cal. yr B.P. and ∼2700–400 cal. yr B.P., potentially related to cooler/wetter episodes of the mid‐to‐late Holocene, including increased precipitation during the Medieval Climatic Anomaly (post‐750 cal. yr B.P.). There is also evidence of a high‐energy erosional event at ∼3800 cal. yr B.P. indicating a large middle Holocene flood. Pioneer provides an example of the archaeological and paleoclimatic value of studying alluvial buried soil stratigraphic sequences in arid environments.     

Form, function and feedbacks in a tidally dominated ooid shoal, Bahamas

Although the general aspects of oolitic depositional systems are well documented, seascape‐scale (≈10³–10⁶ m²) patterns of oolitic shoals and the details of processes acting on them are not well understood or quantified. To begin to fill this basic gap in understanding, this paper describes the morphology and hydrodynamics of Lily Bank, a Modern tidally dominated Bahamian ooid shoal. In this study, integrating remote sensing imagery with quantitative, geo‐located bathymetrical, hydrological and granulometric data in a Geographic Information System documents geomorphic and sedimentological patterns and facilitates interpreting these patterns in the context of the processes operating in this system. The results of these analyses reveal that parabolic bars up to several kilometres in wavelength and several metres in height form a common morphologic motif, although there is considerable variation on that general theme. The seascape‐scale configuration of bars and superimposed sedimentary structures is closely linked to spatial patterns of tidal movements, and includes the presence of mutually evasive flood and ebb channels. Sedimentologically, bars are neither homogenous nor random bodies; instead, granulometric parameters such as sorting and percentage mud vary systematically, as shaped by hydro‐geomorphic controls. The best sorted, coarsest ooids are on bar crests, whereas the finest grains are found in the lower energy, deeper interior and flanking regions. In short, results clearly document hydrodynamic‐bathymetrical influences on these ooid shoals and their granulometry, linkages akin to siliciclastic analogues. Sedimentological, hydrodynamic and geomorphic observations are consistent with a conceptual model for the formation of parabolic bars in which initial irregularities in non‐parabolic bars are enhanced through their effect of focusing flow. Constricted flow leads to higher flow velocities, tidal flow velocity asymmetries, differential net sediment transport and growth of bathymetrical highs. This bathymetrical divergence creates separate paths for flood‐ and ebb‐tides, facilitating emergence of better‐developed parabolic forms. The resultant parabolic geometries and component bedforms appear to be either in dynamic equilibrium with both ebb‐ and flood‐tide flows, or evolving toward that state. In exploring patterns and processes within carbonate shoals, this study illustrates some of the first documented insights on quantitative details of morphology and dynamics and in the links between geomorphic framework and grain‐size and sorting in an oolitic carbonate system. Assuming a continuity of processes between ancient and modern, the insights from this shoal provide information on possible facies geometries and on the characteristics of grains and depositional porosity of analogous facies within ancient ooid shoals.     

Site formation processes at Donggutuo: a major Early Pleistocene site in the Nihewan Basin,North China

Understanding site formation processes is crucial for interpreting archaeological context patterns and hominin behaviour as these affect the preserved condition of a site and the integrity of archaeological remains. The fluvio‐lacustrine sequences in the Nihewan Basin of North China are rich sources of early Pleistocene archaeological sites, which offer an important opportunity to investigate human evolution and adapted behaviours in East Asia. Although many Palaeolithic sites have been reported from the Nihewan Basin, North China, few of them focus on site formation processes before interpreting the hominin behaviour patterns. Here, we present a site formation study of four archaeological layers (Layers 6D, 6C, 6B and 6A) in Trench 1 from the Donggutuo (namely DGT‐T1) site in the Nihewan Basin with an age of 1.1 Ma. Through the study of sedimentary contexts, spatial distributions of artefacts and fossils, intra‐assemblage category ratios, debitage size distributions, lithic abrasion, artifact orientation and planar dip, our results show that all the layers had been disturbed by low‐energy sheet wash across the lake shore setting, but to differing extents. The post‐depositional disturbance caused by water decreased from the lower to the upper layers, from Layer 6D to Layer 6A. This indicates that the archaeological remains in DGT‐T1 have not been subject to significant natural modifications and are thus suitable for studying early hominin behaviour in North China. Copyright © 2019 John Wiley & Sons, Ltd.     

Geomorphology,sedimentology and minimum exposure ages of streamlined subglacial landforms in the NW Himalaya,India

Streamlined subglacial landforms that include drumlins in three study areas, the upper Chandra valley around Chandra Tal, the upper Spiti Valley and the middle Yunam Valley of the NW Himalaya of India were mapped and studied using geomorphic, sedimentological and geochronological methods. These streamlined subglacial landforms include a variety of morphological types, including: (i) half egg‐shaped forms; (ii) complex superimposed forms; (iii) dome‐shaped forms; (iv) inverse forms; and (v) flat‐topped symmetrical forms. Sedimentological data indicate that subglacial deformational processes are responsible for the formation of the streamlined subglacial landforms in the Chandra Tal and upper Spiti Valley study areas. In contrast, streamlined landforms in the middle Yunam Valley are the result of melt‐out and subglacial erosional processes. In the Yunam Valley study area, 11 new cosmogenic ¹⁰Be surface exposure ages were obtained for boulders inset into the crests of streamlined subglacial landforms and moraines, and also for a bedrock surface. The streamlined landforms date to 8–7 ka, providing evidence of an early Holocene valley glaciation, and older moraines date to ～17–15 and 79–52 ka, representing other significant valley glacial advances in the middle Yunam Valley. The subglacial landforms in the Chandra Valley provide evidence for a ≥300‐m‐thick Lateglacial glacier that advanced southeast, overtopping the Kunzum Range, and advancing into the upper Spiti Valley. The streamlined subglacial landforms in these study areas of the NW Himalaya highlight the usefulness of such landforms in developing glacial chronostratigraphy and for understanding the dynamics of Himalayan glaciation.     

长江中游上段沿岸地区地震反应及抗震条件分析

在综合利用物探，地质，钻探等方法查明工作区内地貌，地层及构造条件的基础上，从地震地质，第四纪地质及土体结构研究入手，对区内分析划出的地震基本烈度Ⅶ度区地震反应及抗震条件进行了分析，评价和区划，并提出了对策和建议。     

Constitutive modeling of the destructuration and anisotropy of natural soft clay

The mechanical behavior of natural clays is affected by their inherent anisotropy and metastable soil structure. A simple hierarchical model that considers initial anisotropy and destructuration was formulated within the framework of critical state soil mechanics. In the proposed model, stress sensitivity and a destructuration index were introduced to account for the degree of bonding and the rate of destructuration, respectively. An inclined yield surface was used to incorporate the effect of the initial anisotropy. The proposed model can be degenerated to the Modified Cam Clay model by setting the initial stress sensitivity equal to unity and using a horizontal yield surface. Reasonable agreement between the model simulations and the experimental results on a variety of stress paths demonstrated that the proposed model can capture well the deformation behavior of natural clay and reconstituted soil. The model was implemented into the finite element program for the numerical analysis of an embankment on soft clay improved with prefabricated vertical drains. The numerical predictions were compared with the field-measured data in terms of embankment settlement. Additionally, the numerical simulations were analyzed in terms of horizontal displacements, excess pore water pressure, mean effective stress and volumetric strain. All of the simulations and comparisons indicate the importance of considering the effects of plastic anisotropy, interparticle bonding and destructuration caused by loading beyond yield stress and field disturbance in analyzing the behavior of an embankment on natural soft clay.     

清江中下游岸坡稳定性对河流地貌过程的响应

山地滑坡崩塌是岸坡演化过程中的重要地质事件,其发生发展与河流地貌过程密切相关.目前,对滑坡影响因素的研究虽多,但大多局限于滑坡本身的具体研究.通过河流地貌过程研究,进而探讨岸坡稳定性对河道变迁的响应关系,有助于更深入地认识岸坡演化规律,为岸坡稳定性的评价与预测奠定基础.本文采用自然历史分析法和类比法,结合年龄测试手段,...     

Non‐Destructive or Noninvasive? The Potential Effect of X‐Ray Fluorescence Spectrometers on Luminescence Age Estimates of Archaeological Samples

The non‐destructive nature of X‐ray fluorescence (XRF) spectrometers is a principal reason for an increase in their use in archaeological science over the last 15 years, especially for analyzing museum‐curated artifacts and in situ site fabrics. Here, we show that low‐power XRF spectrometry can be detrimental for luminescence dating (surface applications such as mud‐wasp nest dating in particular). We investigated the effects of irradiation by X‐rays emitted from handheld and benchtop spectrometers on optically stimulated luminescence (OSL) signals. Measurements were taken using a portable OSL (pOSL) unit on the following unprepared archaeological materials: sedimentary quartz grains, pottery, a mud‐wasp nest, stone tools, and a rock flake with anthropogenically applied pigment and natural pigmentation (iron oxides). We observed an increase in luminescence compared to initial background counts for all materials tested, which could lead to overestimation of age determinations in some situations. Our experiment provides a reminder of the potential effects of X‐ray radiation, and the need for thorough documentation of all recording and analytical techniques applied to archaeological materials.     

Geomorphic features extraction from high-resolution topography: landslide crowns and bank erosion

In recent years, new remote-sensed technologies, such as airborne and terrestrial laser scanner, have improved the detail and the quality of topographic information, providing topographical high-resolution and high-quality data over larger areas better than other technologies. A new generation of high-resolution (≤3 m) digital terrain models (DTMs) is now available for different areas and is widely used by researchers, offering new opportunities for the scientific community. These data call for the development of a new generation of methodologies for an objective extraction of geomorphic features, such as channel heads, channel networks, bank geometry, debris-flow channel, debris-flow deposits, scree slope, landslide and erosion scars, etc. A high-resolution DTM is able to detect the divergence/convergence of areas related to unchannelized/channelized processes with better detail than a coarse DTM. In this work, we tested the performance of new methodologies for an objective extraction of geomorphic features related to shallow landsliding processes (landslide crowns), and bank erosion in a complex mountainous terrain. Giving a procedure that automatically recognizes these geomorphic features can offer a strategic tool to map natural hazard and to ease the planning and the assessment of alpine regions. The methodologies proposed are based on the detection of thresholds derived by the statistical analysis of variability of landform curvature. The study was conducted on an area located in the Eastern Italian Alps, where an accurate field survey on shallow landsliding, erosive channelized processes, and a high-quality set of both terrestrial and airborne laser scanner elevation data is available. The analysis was conducted using a high-resolution DTM and different smoothing factors for landform curvature calculation in order to test the most suitable scale of curvature calculation for the recognition of the selected features. The results revealed that (1) curvature calculation is strongly scale-dependent, and an appropriate scale for derivation of the local geometry has to be selected according to the scale of the features to be detected; (2) such approach is useful to automatically detect and highlight the location of shallow slope failures and bank erosion, and it can assist the interpreter/operator to correctly recognize and delineate such phenomena. These results highlight opportunities but also challenges in fully automated methodologies for geomorphic feature extraction and recognition.     

Neolithic Lakeshore Settlements in Switzerland: New Insights on Site Formation Processes from Micromorphology

Lakeside settlements can be regarded as a special type of archaeological site, as, thanks to their location near the shoreline, or even in the lake, various kinds of organic remains have been preserved under waterlogged conditions. This paper presents the results of six‐studied Neolithic lake dwellings from Switzerland. A series of natural and anthropogenic site formation processes were identified through micromorphological analysis and have been compared with natural processes in peatlands. The main processes can be summarized as follows: in the littoral zone a carbonate lake marl stratum accumulated prior to construction of the settlement. During lake regressions, the shore platform became dry and the settlements were established. Throughout the period of occupation, anthropogenic processes led to the accumulation of organic layers. The depositional regime can be characterized as paludal, dominated by constant humidity, and rapid covering of the remains. Some parts of the anthropogenic accumulations have been affected by erosion and reworking processes as a result of lake flooding, and runoff from the hinterland. Finally, the degradation of organic matter occurred only during dry phases when the groundwater level dropped. Seasonality was of great importance in this kind of milieu throughout the various processes described above. © 2013 Wiley Periodicals, Inc.