Tracking the isostatic and eustatic signals in an end Ordovician–early Silurian deglacial sedimentary record (Algeria – Libya border)

To elucidate the signature of isostatic and eustatic signals during a deglaciation period in pre‐Pleistocene times is made difficult because very little dating can be done, and also because glacial erosion surfaces, subaerial unconformities and subsequent regressive or transgressive marine ravinement surfaces tend to amalgamate or erode the deglacial deposits. How and in what way can the rebound be interpreted from the stratigraphic record? This study proposes to examine deglacial deposits from Late‐Ordovician to Silurian outcrops at the Algeria–Libya border, in order to define the glacio–isostatic rebound and relative sea‐level changes during a deglaciation period. The studied succession developed at the edge and over a positive palaeo‐relief inherited from a prograding proglacial delta that forms a depocentre of glaciogenic deposits. The succession is divided into five subzones, which depend on the topography of this depocentre. Six facies associations were determined: restricted marine (Facies Association 1); tidal channels (Facies Association 2); tidal sand dunes (Facies Association 3); foreshore to upper shoreface (Facies Association 4); lower shoreface (Facies Association 5); and offshore shales (Facies Association 6). Stratigraphic correlations over the subzones support the understanding of the depositional chronology and associated sea‐level changes. Deepest marine domains record a forced regression of 40 m of sea‐level fall resulting from an uplift caused by a glacio‐isostatic rebound that outpaces the early transgression. The rebound is interpreted to result in a multi‐type surface, which is interpreted as a regressive surface of marine erosion in initially marine domains and as a subaerial unconformity surface in an initially subaerial domain. The transgressive deposits have developed above this surface, during the progressive flooding of the palaeo‐relief. Sedimentology and high‐resolution sequence stratigraphy allowed the delineation of a deglacial sequence and associated sea‐level changes curve for the studied succession. Estimates suggest a relatively short (<10 kyr) duration for the glacio‐isostatic uplift and a subsequent longer duration transgression (4 to 5 Myr).     

Architecture and formation of transgressive–regressive cycles in marginal marine strata of the John Henry Member,Straight Cliffs Formation,Upper Cretaceous of Southern Utah,USA

Marginal marine deposits of the John Henry Member, Upper Cretaceous Straight Cliffs Formation, were deposited within a moderately high accommodation and high sediment supply setting that facilitated preservation of both transgressive and regressive marginal marine deposits. Complete transgressive–regressive cycles, comprising barrier island lagoonal transgressive deposits interfingered with regressive shoreface facies, are distinguished based on their internal facies architecture and bounding surfaces. Two main types of boundaries occur between the transgressive and regressive portions of each cycle: (i) surfaces that record the maximum regression and onset of transgression (bounding surface A); and (ii) surfaces that place deeper facies on top of shallower facies (bounding surface B). The base of a transgressive facies (bounding surface A) is defined by a process change from wave‐dominated to tide‐dominated facies, or a coaly/shelly interval indicating a shift from a regressive to a transgressive regime. The surface recording such a process change can be erosional or non‐erosive and conformable. A shift to deeper facies occurs at the base of regressive shoreface deposits along both flooding surfaces and wave ravinement surfaces (bounding surface B). These two main bounding surfaces and their subtypes generate three distinct transgressive – regressive cycle architectures: (i) tabular, shoaling‐upward marine parasequences that are bounded by flooding surfaces; (ii) transgressive and regressive unit wedges that thin basinward and landward, respectively; and (iii) tabular, transgressive lagoonal shales with intervening regressive coaly intervals. The preservation of transgressive facies under moderately high accommodation and sediment supply conditions greatly affects stratigraphic architecture of transgressive–regressive cycles. Acknowledging variation in transgressive–regressive cycles, and recognizing transgressive successions that correlate to flooding surfaces basinward, are both critical to achieving an accurate sequence stratigraphic interpretation of high‐frequency cycles.     

Sequence stratigraphy in the context of rapid regional uplift and high‐amplitude glacio‐eustatic changes: the Pleistocene Cutro Terrace (Calabria,southern Italy)

The Cutro Terrace is a mixed marine to continental terrace, where deposits up to 15 m thick discontinuously crop out in an area extending for ca 360 km² near Crotone (southern Italy). The terrace represents the oldest and highest terrace of the Crotone area, and it has been ascribed to marine isotope stage 7 (ca 200 kyr bp ). Detailed facies and sequence‐stratigraphic analyses of the terrace deposits allow the recognition of a suite of depositional environments ranging from middle shelf to fluvial, and of two stacked transgressive–regressive cycles (Cutro 1 and Cutro 2) bounded by ravinement surfaces and by surfaces of sub‐aerial exposure. In particular, carbonate sedimentation, consisting of algal build‐ups and biocalcarenites, characterizes the Cutro 1 cycle in the southern sector of the terrace, and passes into shoreface and foreshore sandstones and calcarenites towards the north‐west. The Cutro 2 cycle is mostly siliciclastic and consists of shoreface, lagoon‐estuarine, fluvial channel fill, floodplain and lacustrine deposits. The Cutro 1 cycle is characterized by very thin transgressive marine strata, represented by lags and shell beds upon a ravinement surface, and thicker regressive deposits. Moreover, the cycle appears foreshortened basinwards, which suggests that the accumulation of its distal and upper part occurred during forced regressive conditions. The Cutro 2 cycle displays a marked aggradational component of transgressive to highstand paralic and continental deposits, in places strongly influenced by local physiography, whereas forced regressive sediments are absent and probably accumulated further basinwards. The maximum flooding shoreline of the second cycle is translated ca 15 km basinward with respect to that of the first cycle, and this reflects a long‐term regressive trend mostly driven by regional uplift. The stratigraphic architecture of the Cutro Terrace deposits is the result of the interplay between regional uplift and high amplitude, Late Quaternary glacio‐eustatic changes. In particular, rapid transgressions, linked to glacio‐eustatic rises that outpaced regional uplift, favoured the accumulation of thin transgressive marine strata at the base of the two cycles. In contrast, the combined effect of glacio‐eustatic falls and regional uplift led to high‐magnitude forced regressions. The superposition of the two cycles was favoured by a relatively flat topography, which allowed relatively complete preservation of stratal geometries that record large shoreline displacements during transgression and regression. The absence of a palaeo‐coastal cliff at the inner margin of the terrace supports this interpretation. The Cutro Terrace provides a case study of sequence architecture developed in uplifting settings and controlled by high‐amplitude glacio‐eustatic changes. This case study also demonstrates how the interplay of relative sea‐level change, sediment supply and physiography may determine either the superposition of cycles forming a single terrace or the formation of a staircase of terraces each recording an individual eustatic pulse.     

Upper Carboniferous to Lower Permian transgressive–regressive sequences of central Spitsbergen,Arctic Norway

Investigation of the Upper Carboniferous to Lower Permian sedimentary strata of central Spitsbergen shows that this highly cyclic rock succession is composed of four long-term transgressive–regressive cycles. These long-term cycles are themselves composed of stacked higher order cycles. Transgressive phases are characterized by increasing accommodation space, and include a basal transgressive part of marked retrogradation of facies belts and thickening-upward component cycles. Regressive phases are characterized by decreasing accommodation space, displayed by progradation of facies belts, overall shallowing and increased restriction of the depositional environment, influx of coarse terrigenous sediments and increasing evidence of exposure and/or non-deposition. The oldest transgressive–regressive sequence identified, Sequence 1, is of Serpukhovian to Bashkirian age and represents a syn-rift sequence. Also composed of syn-rift sediments is the transgressive–regressive Moscovian to mid-Gzhelian-aged Sequence 2. The late Gzhelian to late Asselian Sequence 3 is mainly a post-rift sequence. The youngest sequence, Sequence 4, is of Sakmarian to possible Artinskian age, and is also composed of post-rift sediments. The individual transgressive–regressive cycles are defined as second-order cycles, based on lithological signatures, lateral extent of bounding unconformities, and the actual time period the cycles span. Local tectonic activity is believed to control to some extent the development of short-term cycles in the syn-rift succession. However, cyclicity within the long-term cycles is mainly controlled by eustatic sea-level fluctuations, and therefore enables them to be correlated to other Circum-Arctic regions. Copyright © 1999 John Wiley & Sons, Ltd.     

Anatomy of an Upper Triassic continental to marginal‐marine system: the mixed siliciclastic–carbonate Travenanzes Formation (Dolomites,Northern Italy)

The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply.     

Sedimentary evolution of a Late Pleistocene temperate red algal reef (Coralligène) on Rhodes,Greece: correlation with global sea‐level fluctuations

Autochthonous red algal structures known as coralligène de plateau occur in the modern warm‐temperate Mediterranean Sea at water depths from 20 to 120 m, but fossil counterparts are not so well‐known. This study describes, from an uplifted coastal section at Plimiri on the island of Rhodes, a 450 m long by 10 m thick Late Pleistocene red algal reef (Coralligène Facies), interpreted as being a coralligène de plateau, and its associated deposits. The Coralligène Facies, constructed mainly by Lithophyllum and Titanoderma, sits unconformably upon the Plio‐Pleistocene Rhodes Formation and is overlain by a Maerl Facies (2 m), a Mixed Siliciclastic‐Carbonate Facies (0·2 m) and an Aeolian Sand Facies (2·5 m). The three calcareous facies, of Heterozoan character, are correlated with established members in the Lindos Acropolis Formation in the north of the island, while the aeolian facies is assigned to the new Plimiri Aeolianite Formation. The palaeoenvironmental and genetic‐stratigraphic interpretations of these mixed siliciclastic‐carbonate temperate water deposits involved consideration of certain characteristics associated with siliciclastic shelf and tropical carbonate shelf models, such as vertical grain‐size trends and the stratigraphic position of zooxanthellate coral growths. Integration of these results with electron spin resonance dates of bivalve shells indicates that the Coralligène Facies was deposited during Marine Isotope Stage 6 to 5e transgressive event (ca 135 to 120 ka), in water depths of 20 to 50 m, and the overlying Maerl Facies was deposited during regression from Marine Isotope Stage 5e to 5d (ca 120 to 110 ka), at water depths of 25 to 40 m. The capping Aeolian Sand Facies, involving dual terrestrial subunits, is interpreted as having formed during each of the glacial intervals Marine Isotope Stages 4 (71 to 59 ka) and 2 (24 to 12 ka), with soil formation during the subsequent interglacial periods of Marine Isotope Stages 3 and 1, respectively. Accumulation rates of about 0·7 mm year^?1 are estimated for the Coralligène Facies and minimum accumulation rates of 0·2 mm year^?1 are estimated for the Maerl Facies. The existence of older red algal reefs in the Plimiri region during at least Marine Isotope Stages 7 (245 to 186 ka) and 9 (339 to 303 ka) is inferred from the occurrence of reworked coralligène‐type lithoclasts in the basal part of the section and from the electron spin resonance ages of transported bivalve shells.     

Interplay between shoreline migration paths, architecture and pinchout distance for siliciclastic shoreline tongues: evidence from the rock record

Facies, geometry and key internal stratigraphic surfaces from eight Cretaceous and Eocene clastic shoreline tongues have been documented. The regressive parts of all the studied tongues represent storm‐wave influenced strandplains, deltas or fan‐deltas, and the regressive shoreline trajectories varied from descending to ascending. The transgressive parts of the tongues are dominated by either estuarine or coastal‐plain deposits. The distance from the coeval, up‐dip non‐marine deposits to the basinward pinchout of amalgamated shoreface sandstones, measured along depositional dip, is here termed the sand pinchout distance. The study shows that the angle of regressive‐to‐transgressive turnaround (defined by the angle between the regressive and subsequent transgressive shoreline trajectories) and the process regime during turnaround largely control the sand‐pinchout distance. The amount of transgressive erosion can also partly control the pinchout distance, but this parameter was comparable for the different examples presented here. If the type of depositional system at turnaround and the depth of transgressive erosion are constant, small angles of turnaround are associated with large pinchout distances, whereas larger angles of turnaround result in smaller pinchout distances. The model developed allows sand‐pinchout distance to be predicted, using data for the landward parts of shoreline tongues. The dataset also shows that steeply rising (aggrading) shoreline trajectories tend to produce more heterolithic sandstone tongues than those formed by lower‐angle trajectories.     

A New Interpretation of the Corallian (Upper Jurassic) Cycles of the Dorset Coast,Southern England

The Corallian Group of the Dorset coast is reinterpreted as representing four regressive–transgressive cycles in contrast to previous interpretations which recognized four asymmetric regressive cycles. Each regressive sequence is separated at its top from each transgressive sequence by a sharp erosional contact. Overall, the regressive, coarsening-up sequences are characterized by relatively low faunal diversity, dominantly vertical burrows, relatively coarse sediments with cross-bedding and swaley cross-stratification, and the diagenesis predominantly influenced by meteoric water. In comparison, the transgressive, fining-up sequences are generally characterized by relatively high faunal diversity, dominantly horizontal burrows, basal lag deposits (1–2m in thickness) overlying a sharp, erosional surface, followed by clay or nodular wackestone and dominantly deep burial diagenesis. The consistence of the four regressive-transgressive cycles with the eustatic sea-level curve suggests that the sedimentary cycles of the Corallian outcrops may have been mainly produced by the eustatic sea-level changes. Tectonic movements may have been important in generating localized unconformity, relatively coarse clastic sediment influxes and rapid lateral facies variations. The recognition of storm- and tidally-related sedimentary features suggests that the Corallian Group of the Dorset coast may have been deposited in a storm- and tidally-influenced shallow epicontinental shelf.     

Facies development,depositional settings and sequence stratigraphy across the Ordovician–Silurian boundary: a new perspective from the Barrandian area of the Czech Republic

The Hirnantian and Llandovery sedimentary succession of the Barrandian area has been assigned to middle and outer clastic‐shelf depositional settings, respectively. Deposition was influenced by the remote Gondwanan glaciation and subsequent, long‐persisting, post‐glacial anoxia triggered by a current‐driven upwelling system. High‐resolution graptolite stratigraphy, based upon 19 formally defined biozones—largely interval zones—and five subzones, enabled a detailed correlation between 42 surface sections and boreholes, and enabled linking of the sedimentary record, graptoloid fauna dynamics, organic‐content fluctuations and spectral gamma‐ray curves. The Hirnantian and Llandovery succession has been subdivided into four biostratigraphically dated third‐order sequences (units 1–4). Time–spatial facies distribution recorded early and late Hirnantian glacio‐eustatic sea‐level lowstands separated by a remarkable mid‐Hirnantian rise in sea‐level. A major part of the post‐glacial sea‐level rise took place within the late Hirnantian. The highstand of Unit 2 is apparently at the base of the Silurian succession. Short‐term relative sea‐level drawdown and a third‐order sequence boundary followed in the early Rhuddanian upper acuminatus Zone. Early Aeronian and late Telychian sea‐level highstands and late Aeronian drawdown of likely eustatic origin belong to units 3 and 4. Sea‐level rise culminated in the late Telychian, which may also be considered as a highstand episode of a second‐order Hirnantian–early Silurian cycle. Facies and sequence‐stratigraphic analysis supports recent interpretations on nappe structures in the core part of the Ordovician–Middle Devonian Prague Synform of the Barrandian. Copyright © 2006 John Wiley & Sons, Ltd.     

Sedimentology and stratigraphic development of the upper Nyalau Formation (Early Miocene), Sarawak,Malaysia: A mixed wave- and tide-influenced coastal system

This work presents the first detailed facies analysis of the upper Nyalau Formation exposed around Bintulu, Sarawak, Malaysia. The Lower Miocene Nyalau Formation exposures in NW Sarawak represent one of the closest sedimentological outcrop analogues to the age equivalent, hydrocarbon-bearing, offshore deposits of the Balingian Province. Nine types of facies associations are recognised in the Nyalau Formation, which form elements of larger-scale facies successions. Wave-dominated shoreface facies successions display coarsening upward trends from Offshore, into Lower Shoreface and Upper Shoreface Facies Associations. Fluvio-tidal channel facies successions consist of multi-storey stacks of Fluvial-Dominated, Tide-Influenced and Tide-Dominated Channel Facies Associations interbedded with minor Bay and Mangrove Facies Associations. Estuarine bay facies successions are composed of Tidal Bar and Bay Facies Associations with minor Mangrove Facies Associations. Tide-dominated delta facies successions coarsen upward from an Offshore into the Tidal Bar Facies Association. The Nyalau Formation is interpreted as a mixed wave- and tide-influenced coastal depositional system, with an offshore wave-dominated barrier shoreface being incised by laterally migrating tidal channels and offshore migrating tidal bars. Stratigraphic successions in the Nyalau Formation form repetitive high frequency, regressive–transgressive cycles bounded by flooding surfaces, consisting of a basal coarsening upward, wave-dominated shoreface facies succession (representing a prograding barrier shoreface and/or beach-strandplain) which is sharply overlain by fluvio-tidal channel, estuarine bay or tide-dominated delta facies successions (representing more inshore, tide-influenced coastal depositional environments). An erosion surface separates the underlying wave-dominated facies succession from overlying tidal facies successions in each regressive–transgressive cycle. These erosion surfaces are interpreted as unconformities formed when base level fall resulted in deep incision of barrier shorefaces. Inshore, fluvio-tidal successions above the unconformity display upward increase in marine influence and are interpreted as transgressive incised valley fills.     

Sedimentology,sequence stratigraphy and syn-rift model of younger part of Washtawa Formation and early part of Kanthkot Formation,Wagad, Kachchh basin,Gujarat

The 600 m thick prograding sedimentary succession of Wagad ranging in age from Callovian to Early Kimmeridgian has been divided into three formations namely, Washtawa, Kanthkot and Gamdau. Present study is confined to younger part of the Washtawa Formation and early part of the Kanthkot Formation exposed around Kanthkot, Washtawa, Chitrod and Rapar. The depositional architecture and sedimentation processes of these deposits have been studied applying sequence stratigraphic context. Facies studies have led to identification of five upward stacking facies associations (A, B, C, D, and E) which reflect that deposition was controlled by one single transgressive — regressive cycle. The transgressive deposit is characterized by fining and thinning upward succession of facies consisting of two facies associations: (1) Association A: medium — to coarse-grained calcareous sandstone — mudrocks alternations (2) Association B: fine-grained calcareous sandstone — mudrocks alternations. The top of this association marks maximum flooding surface as identified by bioturbational fabrics and abundance of deep marine fauna (ammonites). Association A is interpreted as high energy transgressive deposit deposited during relative sea level rise. Whereas, facies association B indicates its deposition in low energy marine environment deposited during stand-still period with low supply of sediments. Regressive sedimentary package has been divided into three facies associations consisting of: (1) Association C: gypsiferous mudstone-siltstone/fine sandstone (2) Association D: laminated, medium-grained sandstone — siltstone (3) Association E: well laminated (coarse and fine mode) sandstone interbedded with coarse grained sandstone with trough cross stratification. Regressive succession of facies association C, D and E is interpreted as wave dominated shoreface, foreshore to backshore and dune environment respectively. Sequence stratigraphic concepts have been applied to subdivide these deposits into two genetic sequences: (i) the lower carbonate dominated (25 m) transgressive deposits (TST) include facies association A and B and the upper thick (75m) regressive deposits (HST) include facies association C, D and E. The two sequences are separated by maximum flooding surface (MFS) identified by sudden shift in facies association from B to C. The transgressive facies association A and B represent the sediments deposited during the syn-rift climax followed by regressive sediments comprising association C, D and E deposited during late syn-rift stage.     

Cyclic-facies analysis of geological sections at massive sulfide deposits of the Urals

Cyclic-facies analysis of stratified volcanic sequences in the ore-controlling depressions makes it possible to recognize the recurrent and genetically related sets of rock layers that make up micro-, meso-, and mega-scale eruptive cycles (elementary cycle, mesocycle, and megacycle). Massive sulfide ores occupy a specific position in geological sections. They are confined to the upper portions of elementary eruptive cycles and hosted in volcanosedimentary units, indicating their formation during the periods of waning volcanic activity. The elementary cycles are not all accompanied by ore mineralization. The mineralization is most complete in the upper elementary cycles of each eruptive meso- and megacycles.Translated from Litologiya i Poleznye Iskopaemye, No. 1, 2005, pp. 78–96.Original Russian Text Copyright © 2005 by Rudnitskii.     

Sedimentary environments and depositional characteristics of the Middle to Upper Eocene whale‐bearing succession in the Fayum Depression,Egypt

The discovery of whale fossils from Eocene strata in the Fayum Depression has provoked interest in the life and lifestyle of early whales. Excellent outcrop exposure also affords the dataset to develop sedimentological and stratigraphic models within the Eocene strata. Previous work generally asserts that the thick, sand‐rich deposits of the Fayum Depression represent shoreface and barrier island successions with fine‐grained lagoonal and fluvial associations capping progradational successions. However, a complete absence of wave‐generated sedimentary structures, a preponderance of thoroughly bioturbated strata and increasingly proximal sedimentary successions upwards are contrary to accepted models of the local sedimentological and stratigraphic development. This study considers data collected from two Middle to Upper Eocene successions exposed in outcrop in the Wadi El‐Hitan and Qasr El‐Sagha areas of the Fayum Depression to determine the depositional affinities of Fayum strata. Based on sedimentological and ichnological data, five facies associations (Facies Association 1 to Facies Association 5) are identified. The biological and sedimentological characteristics of the reported facies associations indicate that the whale‐bearing sandstones (Facies Association 1) record distal positions in a large, open, quiescent marine bay that is abruptly succeeded by a bay‐margin environment (Facies Association 2). Upwards, marginal‐marine lagoonal and shallow‐bay parasequences (Facies Association 3) are overlain by thick deltaic distributary channel deposits (Facies Association 4). The capping unit (Facies Association 5) represents a transgressive estuarine depositional environment. The general stratigraphic evolution resulted from a regional, tectonically controlled second‐order cycle, associated with northward regression of the Tethys. Subordinate cycles (i.e. third‐order and fourth‐order cycles) are evidenced by several Glossifungites‐ichnofacies demarcated discontinuities, which were emplaced at the base of flooding surfaces. The proposed depositional models recognize the importance of identifying and linking ichnological data with physical–sedimentological observations. As such – with the exception of wave‐generated ravinement surfaces – earlier assertions of wave‐dominated sedimentation can be discarded. Moreover, this study provides important data for the recognition of (rarely reported) completely bioturbated sand‐dominated offshore to nearshore sediments (Facies Association 1) and affords excellent characterization of bioturbated inclined heterolithic stratification of deltaic deposits. Another outcome of the study is the recognition that the whales of the Fayum Depression are restricted to the highstand systems tracts, and lived under conditions of low depositional energy, low to moderate sedimentation rates, and (not surprisingly) in fully marine waters characterized by a high biomass.     

Late Quaternary stratigraphy and sedimentology of the inner part of southwest Joseph Bonaparte Gulf

Joseph Bonaparte Gulf is a large embayment on the northwestern continental margin of Australia. It is approximately 300 km east‐west and 120 km north‐south with a broad continental shelf to seaward. Maximum width from the southernmost shore of Joseph Bonaparte Gulf to the edge of the continental shelf is 560 km. Several large rivers enter the gulf along its shores. The climate is monsoonal, sub‐humid, and cyclone‐prone during the December‐March wet season. A bedrock high (Sahul Rise) rims the shelf margin. The sediments within the gulf are carbonates to seaward, grading into clastics inshore. A seaward‐thinning wedge of highstand muds dominates the sediments of the inner shelf of Joseph Bonaparte Gulf. Mud banks up to 15m thick have developed inshore. Coarse‐grained sand ridges up to 15 m high are found off the mouth of the Ord River. These overlie an Upper Pleistocene transgressive lag of mixed carbonate and gravelly siliciclastic sand. Four drowned strandlines are present on the inner shelf at depths of 20, 25, 28 and 30 m below datum. These are interpreted as having formed during stillstands in the Late Pleistocene transgression. Older strandlines at great depths are inferred as having formed during the fall in sea‐level following the last highstand. For the most part the Upper Pleistocene‐Holocene marine sediments overlie an erosion surface cut into older Pleistocene sediments. Incised valleys cut into this erosion surface are up to 5 km wide and have a relief of at least 20 m. The largest valley is that cut by the Ord River. Upper Pleistocene sediments deposited in the incised valleys include interpreted lowstand fluvial gravels, early transgressive channel sands and floodplain silts, and late transgressive estuarine sands and gravels. Older Pleistocene sediments are inferred to have been deposited before and during the 120 ka highstand (isotope stage 5). They consist of sandy calcarenites deposited in high‐energy tide‐dominated shelf environments. Still older shelf and valley‐fill sediments underlie these. The contrast between the Holocene muddy clastic sediments and the sandy carbonates deposited by the 120 ka highstand suggests that either the climate was more arid in the past, with less fluvial transport, or that mud was more effectively trapped in estuaries, allowing development of carbonate depositional environments inshore.     

Caledonian Cyclic Unit in the Vendian–Lower Paleozoic Succession of the Ishim–Karatau Lithostructural Zone (Kazakhstan)

The lithofacial study of Vendian–Lower Paleozoic sedimentary sequences of the Greater Karatau and Baikonur synclinorium, which are the constituents of the Ishim–Karatau lithostructural zone, revealed that Vendian, Cambrian, and Ordovician rocks form a continuous succession composing the Caledonian cyclic unit. In duration (220–240 Ma), the latter corresponds to a megacycle. The cyclic unit consists of the transgressive and regressive parts. The upper part of the transgressive succession includes facies of the continental slope, slope foot, near-continental area, and transitional zone between the near-continental and pelagic areas of the abyssal plain. It is shown that an avalanche sedimentation of the second global level occurred twice during the transgressive and regressive phases. The formation of transgressive facies was related to the extension regime during the basin opening, whereas regressive facies accumulated under the compression regime. The Ishim–Karatau zone is located in the western, outer part of Caledoninian structures in Kazakhstan. The Caledonian cyclic unit formed on the Vendian–Early Paleozoic Atlantic-type margin of the Kazakhstan microcontinent. Specific features of the cyclic development of mobile areas are outlined.     

High resolution stratigraphy and facies differentiation of the shallow marine Annot Sandstones, south-east France

High resolution stratigraphical analysis divides a rock succession into the basic genetic units of stratigraphy which are here termed small scale stratigraphical cycles. Each cycle records the sedimentological response to an episode of shallowing and deepening. Assuming that these changes in water depth reflect changes in the shoreline position, they can be considered as regressive/transgressive episodes. Each cycle comprises a regressive and transgressive facies tract which will be variably proportioned; in some examples a facies tract may only be represented by a hiatal surface of no deposition, erosion and/or bypass. In the Annot Sandstones of south-east France, variations in facies types, proportions and associations can be demonstrated both laterally and vertically through the succession. First, it is demonstrated that facies variations occur within regressive or transgressive facies tracts as a function of the stratigraphical stacking pattern of the cycles (i.e. landward, vertical or seaward stacked); this is termed ‘vertical facies differentiation’. Second, the proportions of facies tracts and their constituent facies types within an individual cycle vary between more landward and more seaward palaeogeographical locations; this is termed ‘lateral facies differentiation'. The upper Eocene/lower Oligocene Annot sandstones outcrop in the Maritime Alps of south-east France, within the thin skinned outer fold and thrust belt of the Alpine arc. The sandstones are well exposed in the area of the Col de la Cayolle on the north-west margin of the Argentera Massif, where lithostratigraphical correlations are possible over 3·5 km in a NNW/SSE direction, perpendicular to the edge of the depositional basin. Traditionally, these outcrops have been interpreted as deep marine turbidite lobe sediments; this study reflects a significant reinterpretation of this succession as having been deposited in a shallow marine environment. Seven sedimentary sections were measured through the succession, which is divided into 10 small scale stratigraphical cycles. These cycles are described in terms of eight facies which are separated into their transgressive or regressive facies tracts. In eight of the 10 cycles, the regressive facies tracts reflect the progradation of storm influenced braid deltas over shelf muds and silts. In two of the 10 cycles, the regressive facies tracts reflect barrier inlet and wash-over sands interfingering with back barrier deposits. These latter two cycles are located within landward stepping cycle sets; this is an example of vertical facies differentiation. Transgressive facies tracts locally reworked the upper surface of the regressive facies tract and also comprise barrier and back barrier deposits. The facies succession within each cycle varies according to its position with respect to the palaeoshoreline. The more landward portion of an individual cycle comprises a deltaic shoaling upward succession, culminating in coarse distributary channel conglomerates, overlain by a transgressive barrier/inlet system with extensive back barrier deposits. Beyond the delta front, the more seaward equivalent of individual cycles comprises an erosive base, with aggradational massive pebbly sandstones sitting directly upon offshore heterolithics; these sandstones are interpreted as hyperconcentrated fluvial efflux into the nearshore environment. This grades upward into offshore heterolithics and graded storm deposits representing the products of ravinement, which are then overlain by shelf mudstones. In summary, the more landward portions of cycles preserve predominantly regressive facies tracts, whereas the more seaward portions preserve aggradational to retrogradational strata of the transgressive facies tract; this is an example of lateral facies differentiation.     

Sequence stratigraphy with emphasis on platform-related parasequences of the Zechstein 2 carbonate (Ca2) – the northern platform margin of the Southern Permian Basin (NE Germany)

Facies analysis combined with sequence stratigraphic interpretation of the Upper Permian carbonate (Ca2) of NE Germany (i.e. northern basin margin of the Southern Permian Basin) confirm the existence of a rimmed platform with a steep and tectonically structured slope. The karstified A1 platform is overlain by deposits of a thin transgressive systems tract (TST) and a thick highstand systems tract (HST) which shows two larger-scale regressive shallowing-upwards cycles (4th order) with typical stacking patterns of small-scale cycles (5th order). The TST consists of bitumen-rich mudstones with reworked clasts of anhydrite and early cemented wacke- to grainstones, and it shows two, probably 5th-order, deepening-upwards cycles. The first larger-scale shallowing-up cycle on the Ca2 platform (4th-order) is dominated by aggradation of the bar and shoal deposits, whereas the second one is dominated by progradation. The tops of both cycles are characterised by erosional and exposure surfaces. Various types of small-scale shallowing-upwards cycles (5th-order) are observed in the bar, in the intertidal and in the algal-dominated supratidal environment, showing pronounced transgressive boundaries. On the slope and in the basin, equally thick TST and HST are observed. These incorporate carbonate turbidites which indicate "highstand shedding" from the platform. Various orders of relative sea-level variations are discussed. Controlling factors include tectonics, climate, and eustatic processes. A combined carbonate and evaporite sequence was found on the upper Ca2 slope, which may indicate a Ca2-lowstand systems wedge.     

Pinch-out style and position of tidally influenced strata in a regressive–transgressive wave-dominated deltaic sandbody, Twentymile Sandstone, Mesaverde Group, NW Colorado

The Upper Cretaceous Twentymile Sandstone of the Mesaverde Group in NW Colorado, USA, has been analysed with respect to its pinch‐out style and the stratigraphic position of tidally influenced facies within the sandstone tongue. Detailed sedimentological analysis has revealed that the Twentymile Sandstone as a whole is a deltaic shoreface sandstone tongue up to 50 m thick proximally. Facies change character vertically from very fine‐grained, storm wave‐dominated shelf sandstones and mudstones to fine‐grained, wave‐dominated sandstones and, finally, to fine‐ to coarse‐grained tidally dominated sandstones. The pinch‐out style is characterized by a basinward splitting of the massive proximal sandbody into seven coarsening‐upward fourth‐order sequences consisting of a lower shaly part and an upper sandy part (sandstone tongue). These are stacked overall to reflect the regressive‐to‐transgressive development of the tongue. Each of the lower sandstone tongues 1–3 are gradationally based, very fine‐grained and dominated by hummocky cross‐stratification and were deposited on the lower to upper shoreface. Sandstone tongues 4 and 5 prograded further basinwards than the underlying tongues, are erosively based, fine‐ to coarse‐grained and mainly hummocky, herringbone and trough cross‐stratified. Especially in tongue 5, tidal indicators, such as bipolar foresets and double mud drapes, are common. These tongues were deposited as upper shoreface and tidal channel sandstones respectively. Sandstone tongues 6 and 7 retrograded in relation to tongue 5, are very fine‐ to fine‐grained and hummocky cross‐stratified. These tongues were deposited in lower shoreface to offshore transition environments. The two lower fourth‐order sequences were deposited during normal regressions during slowly rising or stable relative sea level and represent the highstand systems tract. The three succeeding fourth‐order sequences, which show succeedingly increasing evidence of tidal influence, were deposited during falling and lowstand of relative sea level and represent the falling stage (forced regressive) and lowstand systems tracts. The uppermost two fourth‐order sequences were deposited during rapidly rising sea level in the transgressive systems tract. The maximum tidal influence occurred during lowstand progradation, in contrast to most other published examples reporting maximum tidal influence during transgression.     

Evolution of an incised valley system in the southern Adriatic Sea (Apulian margin): an onshore–offshore correlation

Seismic surveys with sub‐bottom profiler were carried out in the Manfredonia Gulf in the southern Adriatic Sea. Here, a buried surface was recognized on which three valleys, located about 80 km from the shelf edge, were deeply incised. Beneath this surface, a pre‐upper Würm seismic unit (PW) was identified. Above, two seismic units were recognized: the transgressive system tract (TST) and highstand system tract (g₂)_. On the basis of regional correlation with onshore and offshore data, these units and their boundaries were dated and correlated with phases of the last glacial–interglacial cycle. The incised valley system was attributed to the Marine Isotopic Stage (MIS) 2. The TST and g₂ units fill the valleys and were attributed to the post‐glacial sea‐level rise and highstand. The incised valleys are anomalous with respect to published models; despite having many characteristics that would have limited the fluvial incision (the lowstand shoreline that remained on the shelf, the low gradient of the shelf, the subsidence that affected the study area since MIS 5), the valleys appear to be deeply incised on the shelf, with valley flanks that can exceed 40 m in height. The model to explain the formation of the valleys comprises enhanced river discharge as the key factor in increasing river energy and promoting erosion across the low gradient shelf. Copyright © 2014 John Wiley & Sons, Ltd.     

Transgressive-regressive cycles in Lower Cretaceous strata,Mississippi Interior Salt Basin area of the northeastern Gulf of Mexico,USA

Four transgressive-regressive (T-R) cycles and five T-R subcycles have been recognized in Lower Cretaceous strata of the northeastern Gulf of Mexico. These T-R cycles are the LKEGR-TR 1 (Lower Cretaceous, Eastern Gulf Region) (upper Valanginian–upper Aptian), the LKEGR-TR 2 (upper Aptian–middle Albian), the LKEGR-TR 3 (middle–upper Albian), and the LKEGR-TR 4 (upper Albian–lower Cenomanian) cycles. The LKEGR-TR 1 Cycle consists of three subcycles: LKEGR-TR 1–1 (upper Valanginian–lower Aptian), LKEGR-TR 1–2 (lower Aptian) and LKEGR-TR 1–3 (upper Aptian) subcycles. The LKEGR-TR 2–1 (upper Aptian–lower Albian) and the LKEGR-TR 2–2 (lower–middle Albian) subcycles constitute the LKEGR-TR 2 Cycle. The LKEGR-TR 3 and the LKEGR-TR 4 cycles consist of a single T-R cycle.Recognition of these T-R cycles is based upon stratal geometries, nature of cycle boundaries, facies stacking patterns within cycles, and large-scale shifts in major facies belts. The T-R subcycles are characterized by shifts in major facies belts that are not of the magnitude of a T-R cycle. The cycle boundary may be marked by a subaerial unconformity, ravinement surface, transgressive surface or surface of maximum regression. A single T-R cycle consists of an upward-deepening event (transgressive aggrading and backstepping phases) and an upward-shallowing event (regressive infilling phase). These events are separated by a surface of maximum transgression. The aggrading phase marks the change from base-level fall and erosion to base-level rise and sediment accumulation; this phase signals the initiation of the creation of shelf-accommodation space. The marine transgressive and flooding events of the backstepping phase are widespread and provide regional correlation datums. Therefore, these T-R cycles and subcycles can be identified, mapped, and correlated in the northeastern Gulf of Mexico area. The progradational events associated with the regressive infilling phase represent a major influx of siliciclastic sediments into the basin, the development of major reef build-ups at the shelf margin, and a significant loss of shelf-accommodation space. These T-R cycles are interpreted to be the result of the amount of and change in shelf-accommodation due to a combination of post-rift tectonics, loading subsidence, variations in siliciclastic sediment supply and dispersal systems, carbonate productivity and eustasy associated with a passive continental margin. The T-R cycles, where integrated with biostratigraphic data, can be correlated throughout the northern Gulf of Mexico region and have the potential for global correlation of Lower Cretaceous strata.