Rates,distributions and mechanisms of change in meander morphology over decadal timescales,River Dane,UK

This paper analyses types and rates of change in river meander morphology and the links between mechanisms of change and emergent behaviour of planform morphology. It uses evidence of four dates of aerial photography combined with annual field mapping and ground photography to examine the morphological changes and mechanisms of change in a series of bends on an active meandering river, the River Dane in NW England, over a 25 year period. This unique data set allows insight into the spatial and temporal variability of bank line movement and component processes. Bank lines were mapped photogrametrically from air photos of 1984, 1996, 2001 and 2007 and the digitised courses compared in ArcGIS to produce calculations of erosional and depositional areas and rates. Most bends exhibit morphological change that largely follows the autogenic sequence, identified in qualitative models of meander development, from low sinuosity curves through simple symmetric and asymmetric bends to compound forms with lobe development in the apex region. Rates of erosion and bankline movement increase through this sequence until the compound phase. Relationships of amounts of movement to various curvature measures of bend morphology are complex. Several new loops, distinct from compound bend behaviour, have developed during the study period in formerly straight sections. Mechanisms of morphological change are illustrated for four types of bends: new, rapid growth bend; sharp‐angled bend with mid‐channel bar development; symmetric migrating bend; and simple to compound bend development. The changes take place in phases that are not simply related to discharge but to inherent sequences and feedbacks in development of bars and bend morphology and timescales for these are identified. Overall, emergent behaviour of systematic planform change, moderated by channel confinement and boundary features, is produced from spatially and temporally varied channel processes. Copyright © 2010 John Wiley & Sons, Ltd.     

Hydraulic parameter estimations of a 2D model validated with sedimentological findings in the point bar environment

There have been a number of flume tests of flow round bends with idealized geometry and recently hydraulic simulations of such experiment. However, studies of hydraulic models in natural river bend are rather limited because of greater complexity of the flow characteristics and lack of detailed data. In this article, we study how 2D hydraulic model and raster‐based hydraulic parameter calculations predict flow characteristics on the natural point bar environment. We will compare calculations of various hydraulic parameters (velocity, bed shear stress and stream power) by the 2D model and the associated sedimentology of the point bars. As a result of comparison, the usability of the 2D model for flow‐form‐product relationship predictions will be evaluated in natural river bend environment. The study shows that the 2D model can be generally utilized to predict the flood‐generated flow‐form‐product relationship in coarse‐grained and structurally complex point bar environments with sand‐dominated bedload. For example, point bar sections submerged in water depths greater than 50 cm showed a relatively good match laterally between the model and sedimentological estimations. Furthermore, this approach allows us to estimate flood processes on a local scale in similar point bar environments with width–length ratio. The flow direction estimates of the 2D model coincided relatively well with the sedimentological estimations on the bar head. However, flow directions on the downstream section could not be modelled because the 2D model cannot handle the helicoidal flow of the river bend. Copyright © 2010 John Wiley & Sons, Ltd.     

The influence of meander bend evolution on the formation of multiple cutoffs: findings inferred from floodplain architecture and bend geometry

The evolution of meander bends and formation of cutoffs, including a series of cutoffs developed simultaneously in a number of bends, have been investigated by many researchers. However, relatively little is known about factors that lead to the development of multiple cutoffs that are formed subsequently at one location. The present study aims to determine the influence of meander bend development on multiple chute cutoff formation in a single bend. The research is based on the sedimentary record of meander migration and cutoffs preserved in a lowland river floodplain (the lower Obra River, Poland). Analysis of changes in meander geometry was conducted to describe the influence of their migration on cutoff formation and in other rivers where multiple cutoffs occurred. The results showed that multiple cutoffs in the lower Obra River have occurred during the last 3000 years, owing to the interaction of upstream and downstream controls: migration of meander bends in opposing directions accompanied by an increase of flood frequency and sediment supply. The flow and sediment supply has been further altered since the nineteenth century due to anthropogenic impacts: an artificial cutoff of the downstream bend and elevation of channel levées. Similar mechanisms driving the formation of multiple cutoff have been found in other river courses, despite significantly higher energy of the compared rivers. Moreover, development of a confined‐shape bend (caused by artificial barrier or autogenic bend behaviour) may also favour the formation of multiple cutoffs. However, counter migration of meanders enhanced by increased flood frequency and sediment supply are primary triggers for such events. Copyright © 2015 John Wiley & Sons, Ltd.     

THE FORMING CONDITIONS OF ALLUVIAL RIVER CHANNEL PATTERNS

1 INTRODUCTION It is well known that the river channel patterns are determined by long-term water-sediment conditions. However, quantitative expressions for river channel patterns and their fluvial processes still remain not clear. Existing theories in this aspects, such as geomophological theory, theory of maximum energy consuming rate, stability theory, theory of probability, and statistic analysis, are developed based on certain simplified assumptions and can not be successfully used t…     

Flow and grainsize pattern in a sharply curved river bend

The main characteristics of river flow and grainsize in a bend of the sand bedded meandering river Dommel, The Netherlands, are presented. Measurements were carried out at a relatively low discharge in a sharply curved bend following a long straight reach. In the studied bend, secondary circulation is restricted to the thalweg area; only in the downstream part of the bend it exists over the entire cross-section. Therefore, on the entire pointbar platform, which comprises the larger part of the bend, the median sedimentation diameter of the bedload material is governed by the distribution of the longitudinal components of the bed shear stress only.     

Influence of junction angle on three‐dimensional flow structure and bed morphology at confluent meander bends during different hydrological conditions

Recent field and modeling investigations have examined the fluvial dynamics of confluent meander bends where a straight tributary channel enters a meandering river at the apex of a bend with a 90° junction angle. Past work on confluences with asymmetrical and symmetrical planforms has shown that the angle of tributary entry has a strong influence on mutual deflection of confluent flows and the spatial extent of confluence hydrodynamic and morphodynamic features. This paper examines three‐dimensional flow structure and bed morphology for incoming flows with high and low momentum‐flux ratios at two large, natural confluent meander bends that have different tributary entry angles. At the high‐angle (90°) confluent meander bend, mutual deflection of converging flows abruptly turns fluid from the lateral tributary into the downstream channel and flow in the main river is deflected away from the outer bank of the bend by a bar that extends downstream of the junction corner along the inner bank of the tributary. Two counter‐rotating helical cells inherited from upstream flow curvature flank the mixing interface, which overlies a central pool. A large influx of sediment to the confluence from a meander cutoff immediately upstream has produced substantial morphologic change during large, tributary‐dominant discharge events, resulting in displacement of the pool inward and substantial erosion of the point bar in the main channel. In contrast, flow deflection is less pronounced at the low‐angle (36°) confluent meander bend, where the converging flows are nearly parallel to one another upon entering the confluence. A large helical cell imparted from upstream flow curvature in the main river occupies most of the downstream channel for prevailing low momentum‐flux ratio conditions and a weak counter‐rotating cell forms during infrequent tributary‐dominant flow events. Bed morphology remains relatively stable and does not exhibit extensive scour that often occurs at confluences with concordant beds. Copyright © 2014 John Wiley & Sons, Ltd.     

Stochastic erosion of composite banks in alluvial river bends

The erosion of composite river banks is a complex process involving a number of factors including fluvial erosion, seepage erosion, and cantilever mass failure. To predict the rate of bank erosion with these complexities, a stochastic bank erosion model is suitable to define the probability distribution of the controlling variables. In this study, a bank erosion model in a river bend is developed by coupling several bank erosion processes with an existing hydrodynamic and morphological model. The soil erodibility of cohesive bank layers was measured using a submerged jet test apparatus. Seasonal bank erosion rates for four consecutive years at a bend in the Brahmaputra River, India, were measured by repeated bankline surveys. The ability of the model to predict erosion was evaluated in the river bend that displayed active bank erosion. In this study, different monsoon conditions and the distribution functions of two variables were considered in estimating the stochastic bank erosion rate: the probability of the soil erodibility and stochastic stage hydrographs for the nth return period river stage. Additionally, the influences of the deflection angle of the streamflow, longitudinal slope of river channel, and bed material size on bank erosion rate were also investigated. The obtained stochastic erosion predictions were compared with the observed distribution of the annual‐average bank erosion rate of 45 river bends in the Brahmaputra River. The developed model appropriately predicted the short‐term morphological dynamics of sand‐bed river bends with composite banks. Copyright © 2014 John Wiley & Sons, Ltd.     

A cellular model of river meandering

River meandering has been successfully modelled using vector based methods, but these can not simulate multiple or braided channels. Conversely, cellular braided river models fail to replicate meandering. This paper describes a new method to simulate river meandering within a cellular model (CAESAR). A novel technique for determining bend radius of curvature on a cell by cell basis is described, that importantly allows regional information on bend curvature to be transferred to local points. This local curvature is then used to drive meandering and lateral erosion through two methods. Key difficulties are identified, including the deposition of material on point bars and cut off development, but the method illustrates how meandering can be integrated within a cellular framework. This demonstrates the potential to produce a single model that can incorporate both meandering and braiding. Copyright © 2006 John Wiley & Sons, Ltd.     

Flow separation at the inner (convex) and outer (concave) banks of constant‐width and widening open‐channel bends

There is a paucity of data and insight in the mechanisms of, and controls on flow separation and recirculation at natural sharply‐curved river bends. Herein we report on successful laboratory experiments that elucidate flow structure in one constant‐width bend and a second bend with an outer‐bank widening. The experiments were performed with both a flat immobile gravel bed and mobile sand bed with dominant bedload sediment transport. In the constant‐width bend with immobile bed, a zone of mainly horizontal flow separation (vertical rotational axis) formed at the inner bank that did not contain detectable flow recirculation, and an outer‐bank cell of secondary flow with streamwise oriented rotational axis. Surprisingly, the bend with widening at the outer bank and immobile bed did not lead to a transverse expansion of the flow. Rather, flow in the outer‐bank widening weakly recirculated around a vertical axis and hardly interacted with the inner part of the bend, which behaved as a constant‐width bend. In the mobile bed experiment, downstream of the bend apex a pronounced depositional bar developed at the inside of the bend and pronounced scour occurred at the outside. Moreover the deformed bed promoted flow separation over the bar, including return currents. In the constant‐width bend, the topographic steering impeded the generation of an outer‐bank cell of secondary flow. In the bend with outer‐bank widening, the topographic steering induced an outward expansion of the flow, whereby the major part of the discharge was conveyed in the central part of the widening section. Flow in the outer‐bank widening was highly three dimensional and included return currents near the bottom. In conclusion, the experiments elucidated three distinct processes of flow separation common in sharp bends: flow separation at the inner bank, an outer‐bank cell of secondary flow, and flow separation and recirculation in an outer‐bank widening. Copyright © 2012 John Wiley & Sons, Ltd.     

Routing procedures for observed dispersion coefficients in two-dimensional river mixing

Routing procedures have been used for determining the observed values of the dispersion coefficient in river mixing studies. In order to overcome the shortcomings of the existing routing procedures, we developed a new routing procedure capable of being applied under a transient concentration situation while accounting for river irregularities. The proposed routing procedure is based on the exact solution of the depth-averaged, two-dimensional, mass transport equation combined with the stream-tube concept and was verified through the tracer data acquired from field tests conducted in natural rivers located in Korea. The observed dispersion coefficients evaluated by the routing procedure exhibited a stream-wise variation along the rivers, in that a minimum value was seen in the straight region and a maximum value downstream of the apex of the bend. This variation was attributed to the flow dynamics of secondary currents induced by the meandering of the rivers. The dispersion coefficients obtained by the new method over the reach were in the same range of those calculated by other methods.     

Scour and flow field around a spur dike in a 90° bend

Spur dike is an important element in fiver training that creates rapid variations in flow field, sediment transport and bed topography. The mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. Most of previous investigations on flow behavior and scour around spur dike were carried out in straight channels. In this paper results of experiments on flow field and scour around a spur dike in a 90 degree channel bend are presented, Sand with uniform grain size was used as the bed material, Experiments were conducted for different locations and different lengths of spur dikes at the bend with different values of discharge, The three dimensional flow fields around a spur dike were investigated, The maximum depth of scour was correlated to the Froude numbers, lengths and the locations of spur dike in the bend.     

Scour and flow field around a spur dike in a 90° bend

Spur dike is an important element in river training that creates rapid variations in flow field, sediment transport and bed topography. The mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. Most of previous investigations on flow behavior and scour around spur dike were carried out in straight channels. In this paper results of experiments on flow field and scour around a spur dike in a 90 degree channel bend are presented. Sand with uniform grain size was used as the bed material. Experiments were conducted for different locations and different lengths of spur dikes at the bend with different values of discharge. The three dimensional flow fields around a spur dike were investigated. The maximum depth of scour was correlated to the Froude numbers, lengths and the locations of spur dike in the bend.     

Spatial and temporal intensification of lateral hyporheic flux in narrowing intra‐meander zones

Meander bends in alluvial rivers morphologically evolve towards meander cut‐off with narrowing intra‐meander necks, and this should steepen hydraulic gradients and intensify intra‐meander hyporheic flux. This research used dye tracking and head loss measurements in a 1 : 500 planimetrically scaled laboratory river table to quantify the spatial and temporal intensification of intra‐meander flux rates at two evolution ages. The younger meander bend, M1, had a sinuosity of 2.3, a river neck width of 0.39 cm, and 0.6% river slope, and the older meander bend, M3, had a sinuosity of 5.2, a river neck width of 0.12 cm, and 0.5% river slope. Flux into and out of the meander bend was estimated along the normalized curvilinear distance s*, with the meander neck at s* = 0.1 and s* = 0.9, the meander centroid at s* = 0.37 and s* = 0.63, and the apex at s* = 0.5. Between the meander centroid and neck, we documented a 60% spatial intensification for M1 and a 90% spatial intensification for M3. Between M1 and M3, we documented a 135% temporal intensification at the neck and a 100% intensification at the centroid. Our empirical spatial and temporal intensification rates involving the M1 and the M3 scenario were one to three times lower than theoretical rates derived from a river evolution model with equivalent M1 and M3 planimetry. Overestimation by the theoretical model was attributed to exaggerated head loss caused by the model neglecting groundwater contributions to river stage. Hyporheic exchange provides critical ecosystem services, and its spatial and temporal variation with meander evolution should be considered in river management. Copyright © 2012 John Wiley & Sons, Ltd.     

Disturbed periodic model for river meanders

Although river meanders are not perfectly regular their serial statistics show periodic tendencies which cannot be explained by previous stochastic models. The regular and random approaches to meander geometry can be reconciled in a disturbed periodic model with separate scale, sinuosity, and irregularity parameters. Meandering is viewed as a deterministic oscillation but irregularity is introduced by quasi-random variability in valley-floor topography and materials. For stability such a model needs either a Bagnold type limit on bend curvature or frictional damping of the oscillatory response to individual disturbances. Realistic statistical properties are derived for the second case. The differential equation for direction can be approximated by a second-order autoregression, which generates realistic simulated patterns and gives a good fit to natural direction series.     

Numerical investigation of avulsions in gravel-bed braided rivers

Gravel-bed braided rivers are highly energetic fluvial systems characterized by frequent in-channel avulsions, which govern the morphodynamics of such rivers and are essential for them to maintain a braided planform. However, the avulsion mechanisms within natural braided rivers remain unclear due to their complicated hydraulic and morphodynamic processes. Influenced by neighbouring channels, avulsions in braided rivers may differ from those of bifurcations in single-thread rivers, suggesting that avulsions should be studied within the context of the entire braid network. In this study, braiding evolution processes in gravel-bed rivers were simulated using a physics-based numerical model that considers graded bed-load transport by dividing sediment particles into multiple size fractions and vertical sediment sorting by dividing the riverbed into several vertical layers. The numerical model successfully produced braiding processes and avulsion activities similar to those observed in a laboratory river. Results show that bend evolution of the main channel was the fundamental process controlling the occurrence of avulsions in the numerical model, with a cyclic process of channel meandering by lateral migration that transitioned to a straight channel pattern by avulsion. The radius of bend curvature for triggering avulsions in the numerical model was measured and it was found that the highest probability for a channel bend to generate an avulsion occurs when its radius of curvature is approximately 2.0–3.3 times the average anabranch width. Other types of avulsion were also observed that did not occur specifically at meander bends, but upstream meander evolution indirectly influenced such avulsions by altering channel pattern and discharge to those locations. This study explored the processes and mechanisms of several types of avulsion, and proposed factors controlling their occurrence, namely increasing channel curvature, high shear stress, tributary discharge, riverbed gradient and upstream channel pattern, with high shear stress being a direct indicator. Furthermore, avulsions in a typical gravel-bed braided river, the Waimakariri River in New Zealand, were analysed using sequential Google Earth maps, which confirmed the conclusions derived from the numerical simulation.     

Theory and application of nonlinear river dynamics

A theoretical model for river evolution including riverbed formation and meandering pattern formation is presented in this paper.Based on nonlinear mathematic theory,the nonlinear river dynamic theory is set up for river dynamic process.Its core content includes the stability and tropism characteristics of flow motion in river and river selves＇ evolution.The stability of river dynamic process depends on the response of river selves to the external disturbance,if the disturbance and the resulting response will eventually attenuate,and the river dynamics process can be restored to new equilibrium state,the river dynamic process is known as stable;otherwise,the river dynamic process is unstable.The river dynamic process tropism refers to that the evolution tendency of river morphology after the disturbance.As an application of this theory,the dynamical stability of the constant curvature river bend is calculated for its coherent vortex disturbance and response.In addition,this paper discusses the nonlinear evolution of the river peristaltic process under a large-scale disturbance,showing the nonlinear tendency of river dynamic processes,such as river filtering and butterfly effect.     

Channel bar dynamics on multi‐decadal timescales in an active meandering river

Occurrence and development of channel bars are major components of the morphodynamics of rivers and their relation to river meandering has been much explored through theory and experimentation. However, field and documentary data of characteristics and evolution over timescales from years to several decades are lacking. Four sets of aerial photographs in the period 1984–2007 were used to map and quantify bar numbers and areas in GIS on an active meandering reach. Bar types were classified. Additional temporal resolution was provided by annual ground photography and mapping for 1981–2010. Analysis was extended backward by use of large scale Ordnance Survey maps from 1873 onwards. As expected, point bars are the most common type but ‘free’ bars of several types are major components of bar deposition. Point bars and attached bars are significantly larger in size than mid‐channel and side bars. Spatial distribution of bars varies down the reach and over time but is related to channel sinuosity, gradient and mobility and to bend evolution. Different types of bar occur in distinctive channel locations, with point and concave‐bend bars in zones of high curvature. Bar activity shows a relation with discharge events and phases and possibly with changing riparian conditions, but superimposed on this is a common sequence of bar evolution from incipient gravel mid‐channel bars to full floodplain integration. This life‐cycle is identified as 7–9 years on average. No evidence for mobility of free bars within the course is found. The results are compared with bar and bend theory; the bars are forced and conform in general to bend theory but detailed variation relates to geomorphic factors and to autogenic sequences of bends and bars. Mid‐channel bars are width induced. Variability of bar occurrence needs to be taken into account in river management and ecological evaluation, including for the EU WFD. Copyright © 2011 John Wiley & Sons, Ltd.     

Circulation cells topology and their effect on migration pattern of different multi-bend meandering rivers

In meandering rivers, a cross-stream flow, referred to as a secondary current, has important effects on broad spectra of hydraulic/environmental characteristics, running the gamut from river hydrodynamics and geomorphology to stream ecology. The transport equation for vorticity and kinetic energy transfer should be analyzed to specify terms involved in generation of secondary currents. However, there is limited research on scrutinizing these terms in meandering rivers. On the other hand, while rivers are mostly multi-bend, previous studies have been limited to single bends. In the current paper, three physical multi-bend channels representing a strongly curved bend, a mild bend and an elongated symmetrical meander loop are designed in order to unravel mechanisms responsible for forming circulation cells in cross sections. Experiments are carried out in the middle bend of these models. Cross-stream turbulence anisotropy considerably strengthens almost all near bank cells. Moreover, contrary to single sharp bends, multi bend effects hinder the transfer of the kinetic energy in both directions in the entrance section of the strongly curved bend.     

A simple model of river meandering and its comparison to natural channels

We develop a new method for analysis of meandering channels based on planform sinuosity. This analysis objectively identifies three channel‐reach lengths based on sinuosity measured at those lengths: the length of typical, simple bends; the length of long, often compound bends; and the length of several bends in sequence that often evolve from compound bends to form multibend loops. These lengths, when normalized by channel width, tend to fall into distinct and clustered ranges for different natural channels. Mean sinuosity at these lengths also falls into distinct ranges. That range is largest for the third and greatest length, indicating that, for some streams, multibend loops are important for planform sinuosity, whereas for other streams, multibend loops are less important. The role of multibend loops is seldom addressed in the literature, and they are not well predicted by previous modelling efforts. Also neglected by previous modelling efforts is bank–flow interaction and its role in meander evolution. We introduce a simple river meandering model based on topographic steering that has more in common with cellular approaches to channel braiding and landscape evolution modelling than to rigorous, physics‐based analyses of river meandering. The model is sufficient to produce reasonable meandering channel evolution and predicts compound bend and multibend loop formation similar to that observed in nature, in both mechanism and importance for planform sinuosity. In the model, the tendency to form compound bends is sensitive to the relative magnitudes of two lengths governing meander evolution: (i) the distance between the bend cross‐over and the zone of maximum bank shear stress, and (ii) the bank shear stress dissipation length related to bank roughness. In our simple model, the two lengths are independent. This sensitivity implies that the tendency for natural channels to form compound bends may be greater when the banks are smoother. Copyright © 2002 John Wiley & Sons, Ltd.     

Hydraulic and geomorphic processes in an overbank flood along a meandering,gravel‐bed river: implications for chute formation

Hydraulic interactions between rivers and floodplains produce off‐channel chutes, the presence of which influences the routing of water and sediment and thus the planform evolution of meandering rivers. Detailed studies of the hydrologic exchanges between channels and floodplains are usually conducted in laboratory facilities, and studies documenting chute development are generally limited to qualitative observations. In this study, we use a reconstructed, gravel‐bedded, meandering river as a field laboratory for studying these mechanisms at a realistic scale. Using an integrated field and modeling approach, we quantified the flow exchanges between the river channel and its floodplain during an overbank flood, and identified locations where flow had the capacity to erode floodplain chutes. Hydraulic measurements and modeling indicated high rates of flow exchange between the channel and floodplain, with flow rapidly decelerating as water was decanted from the channel onto the floodplain due to the frictional drag provided by substrate and vegetation. Peak shear stresses were greatest downstream of the maxima in bend curvature, along the concave bank, where terrestrial LiDAR scans indicate initial floodplain chute formation. A second chute has developed across the convex bank of a meander bend, in a location where sediment accretion, point bar development and plant colonization have created divergent flow paths between the main channel and floodplain. In both cases, the off‐channel chutes are evolving slowly during infrequent floods due to the coarse nature of the floodplain, though rapid chute formation would be more likely in finer‐grained floodplains. The controls on chute formation at these locations include the flood magnitude, river curvature, floodplain gradient, erodibility of the floodplain sediment, and the flow resistance provided by riparian vegetation. Copyright © 2015 John Wiley & Sons, Ltd.