Study of dislocation model and evolution characteristics of vertical deformation field of gonghe M S=6.9 earthquake

The preliminary research results of vertical deformation dislocation model of GongheM _S =6.9 earthquake show that, the causative structure is a hidden fault with strike N60°W, dipping S47°W, which lies near the current subsidence center of Gonghe basin. The rupture length and width are 30km and 14km, the upper and lower bound depth of the fault in width direction are 3km and 17km respectively. The maximum coseismic and preseismic vertical deformation of GongheM _S =6.9 earthquake are 247mm and about 100mm. The reasons why there existed rapid postseismic uplift are also given a tentative discussion. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 289–295, 1993.     

Structural analysis and interpretation of the surface deformation associated with the Ning’er,Yunnan Province,China <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province M_S6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, landslide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mechanism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er M_S6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of M_S≥2 is 330°, and the focal depths are within the range of 3～12 km, predominantly within 3～10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic framework might be the main cause of the frequent occurrence of M_S6.0～6.9 earthquakes in the area.     

基于Sentinel-1A数据反演漾濞MS6.4地震的同震形变场及断层几何参数

2021年5月21日晚21时48分,云南省大理州漾濞县(震中:25.67°N,99.87°E)发生M_S6.4地震,震源深度8 km。为快速获得此次地震同震形变场及断层几何参数,研究该次地震的发震构造等,文章基于震前、震后的sentinel-1A卫星升降轨SAR数据进行二轨法差分雷达干涉测量(DInSAR),并基于Okada弹性半空间位错模型反演断层几何参数。研究结果如下:(1)此次地震造成的同震形变场长约19 km,宽约20 km;(2)升轨雷达视线向最大形变约为8.2 cm,降轨雷达视线向最大形变约为8.7 cm;(3)地震断层走向为313.7°,倾角为87°,滑动角为175°,为右旋走滑型断层,最大滑动量为0.79 m,反演得出的地震矩为1.48×10~(18) N·m,矩震级为M_W6.1。在川滇块体向南挤出的构造背景下,块体西边界的维西—乔后断裂、红河断裂发生右旋走滑,本次地震便是维西—乔后断裂南段分支断裂右旋走滑活动的体现。     

InSAR数据约束的2022年1月8日青海门源MS6.9地震发震构造研究

利用Sentinel-1A卫星升降轨道数据和D-InSAR技术获得青海门源2022年1月8日M_S6.9地震的同震形变场,并基于弹性半空间位错模型反演其震源参数,利用分布滑动模型确定断层面上的滑动分布。结果表明,2022年1月8日青海门源地震的同震形变场沿NWW-SEE方向分布;断裂带南缘升轨影像和降轨影像最大视距分别为61 cm和62 cm,断裂带北缘升轨影像和降轨影像最大视距地表形变量分别为43 cm和56 cm。InSAR同震形变场断裂尺度模型断层长30 km,宽18 km,最大滑移量3.5 m;断层滑动分布模型表明该地震为左旋走滑地震。结合冷龙岭断裂的运动特征和几何特征,初步确定此次M_S6.9地震的发震断裂为冷龙岭断裂     

High-precision relocation of the aftershock sequence of the January 8, 2022, MS6.9 Menyuan earthquake

The 2022 Menyuan M_S6.9 earthquake, which occurred on January 8, is the most destructive earthquake to occur near the Lenglongling (LLL) fault since the 2016 Menyuan M_S6.4 earthquake. We relocated the mainshock and aftershocks with phase arrival time observations for three days after the mainshock from the Qinghai Seismic Network using the double-difference method. The total length and width of the aftershock sequence are approximately 32 km and 5 km, respectively, and the aftershocks are mainly concentrated at a depth of 7–12 km. The relocated sequence can be divided into 18 km west and 13 km east segments with a boundary approximately 5 km east of the mainshock, where aftershocks are sparse. The east and west fault structures revealed by aftershock locations differ significantly. The west fault strikes EW and inclines to the south at a 71º–90º angle, whereas the east fault strikes 133º and has a smaller dip angle. Elastic strain accumulates at conjunctions of faults with different slip rates where it is prone to large earthquakes. Based on surface traces of faults, the distribution of relocated earthquake sequence and surface ruptures, the mainshock was determined to have occurred at the conjunction of the Tuolaishan (TLS) fault and LLL fault, and the west and east segments of the aftershock sequence were on the TLS fault and LLL fault, respectively. Aftershocks migrate in the early and late stages of the earthquake sequence. In the first 1.5 h after the mainshock, aftershocks expand westward from the mainshock. In the late stage, seismicity on the northeast side of the east fault is higher than that in other regions. The migration rate of the west segment of the aftershock sequence is approximately 4.5 km/decade and the afterslip may exist in the source region.     

2022年门源MS6.9地震震区三维速度与发震机制研究

2022年1月8日,青海省门源县发生M_S6.9地震。使用青海、甘肃等区域数字台网所观测到的2009年1月1日—2022年2月8日间青海门源及周边地区(36°～39°N,101°～104°E)14 869次地震事件的地震观测资料,基于双差成像(TomoDD)方法进行重定位分析,结果表明：门源及周边地区地震震源深度较浅,主要集中在5～15 km深度范围,其中10 km附近分布最多。推断该深度区域为门源及周边地区的主要孕震区。基于地震重定位结果和主震区三维速度结构分别对2016年门源M_S6.4地震和此次地震序列的发震机理进行分析对比,发现两次地震都位于高速异常体边缘,速度结构与断裂、地震序列吻合较好。2022年门源地震位于高速体的西端末梢位置,是该高速体受青藏高原东北缘顺时针应力作用导致的滑动产生的走滑型地震。     

Coseismic Slip from the 6 October 2008, M w6.3 Damxung Earthquake, Tibetan Plateau, Constrained by InSAR Observations

Coseismic deformation fields of the 6 October 2008 M _w6.3 Damxung earthquake were obtained from interferometric synthetic aperture radar by using three descending and two ascending Envisat images. Significant coseismic surface deformation occurred within 20?km?×?20?km of the epicenter with a maximum displacement of ~0.3?m along the satellite line of sight. We model a linear elastic dislocation in a homogeneous half space and use a nonlinear constraint optimized algorithm to estimate the fault location, geometry and slip distribution. The results indicate a moment magnitude M _w6.3, and the earthquake is dominated by oblique normal and right-lateral slip with a maximum slip of 2.86?m at depth of 8?km. The rupture plane is about 15?km?×?14?km with strike S190°W and dip 55° to NW, located at a secondary fault of the Southeastern Piedmont of the Nyainqentanglha Mountains. Slip on normal faults in the Tibetan Plateau contributes to the rift evolution.     

2022门源MS6.9地震地表破裂带震害特征调查

2022年1月8日,青海省海北藏族自治州门源县发生M_S6.9地震,震中位于青藏高原东北缘地区祁连—海原断裂带的冷龙岭断裂和托勒山断裂构造转换区域(37.77°N,101.26°E)。震后野外现场考察结果表明,此次地震形成的同震地表破裂带总长度约为26 km,整体走向NWW向,破裂性质以左旋走滑局部逆冲为主。断层错动造成的破坏形式以雁列式组合的张裂隙、张剪裂隙、挤压鼓包、断层陡坎等为主。其中,道河至硫磺沟段地表破裂最为强烈,规模大且连续性好,造成的震害最为显著,地表破裂规模向东、西两端逐渐衰减。破裂带穿过区域内多条河流,造成显著的冰面破裂变形,并沿河岸形成一系列的边坡崩塌、滚石等地质灾害。综合破裂带及震害规模分析,宏观震中位于道河至硫磺沟地区。     

Structural analysis and interpretation of the surface deformation associated with the Ning’er, Yunnan Province, China M S6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province MS6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, land-slide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mecha-nism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er MS6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of MS≥2 is 330°, and the focal depths are within the range of 3~12 km, predominantly within 3~10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic     

InSAR数据约束的2021年5月21日云南漾濞MS6.4地震发震构造研究

运用Sentinel-1A卫星数据和D-InSAR技术,获取2021-05-21云南漾濞M_S6.4地震的同震形变场。结果显示,漾濞地震同震形变场长轴近NW展布升降轨形变场符号相反,视线向最大沉降量和抬升量为0.1 m。InSAR同震形变场反演的滑动分布主要集中在沿走向2～12 km,倾向1～9 km的范围内,最大滑动量0.35 m,发震断层长9.8 km、宽4 km,滑动量主要集中在地下3～6 km范围内,滑动角-146.7°。同震位移场及滑动分布模型反映本次地震为发震断层的右旋走滑事件,地震破裂未达到地表。断层模型反演结果显示,矩震级为M_W6.1,发震断层以北西走向右旋走滑运动为主,初步认为本次M_W6.1地震发震断裂可能是一条NW向的维西—乔后断裂西侧的隐伏次生断裂。     

Coseismic deformation of the 2021 MW7.4 Maduo earthquake from joint inversion of InSAR,GPS, and teleseismic data

The M_W7.4 Maduo earthquake occurred on 22 May 2021 at 02:04 CST with a large-expansion surface rupture. This earthquake was located in the Bayan Har block at the eastern Tibetan Plateau, where eight earthquakes of M_S >7.0 have occurred in the past 25 years. Here, we combined interferometric synthetic aperture radar, GPS, and teleseismic data to study the coseismic slip distribution, fault geometry, and dynamic source rupture process of the Maduo earthquake. We found that the overall coseismic deformation field of the Maduo earthquake is distributed in the NWW-SEE direction along 285°. There was slight bending at the western end and two branches at the eastern end. The maximum slip is located near the eastern bending area on the northern branch of the fault system. The rupture nucleated on the Jiangcuo fault and propagated approximately 160 km along-strike in both the NWW and SEE directions. The characteristic source rupture process of the Maduo earthquake is similar to that of the 2010 M_W6.8 Yushu earthquake, indicating that similar earthquakes with large-expansion surface ruptures and small shallow slip deficits can occur on both the internal fault and boundary fault of the Bayan Har block.     

Moment tensor inversion and source rupture process of the September 27, 2003 <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>=7.9 earthquake occurred in the border area of China,Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

2022年门源MS6.9和2016年门源MS6.4地震序列比较分析

2022年1月8日青海省海北州门源县发生M_S6.9地震,震中距离2016年1月21日门源M_S6.4地震震中约33km,两次门源地震均发生在冷龙岭断裂附近,但在震源机制、主发震断层破裂过程及地震序列余震活动等方面显著不同。针对两次门源地震序列的比较分析,对研究冷龙岭断裂及其附近区域强震序列和余震衰减特征等具有重要研究意义。通过对比分析2022年门源M_S6.9地震和2016年门源M_S6.4地震余震的时空演化特征,发现二者在震源过程和断层破裂尺度上存在明显差异,前者发震断层破裂充分,震后能量释放充分,余震丰富且震级偏高;而后者发震断层未破裂至地表,余震震级水平偏低。综合分析两次门源地震序列表现出来的差异性,认为其可能与地震发震断层的破裂过程密切相关,且同时受到区域构造环境的影响。     

Correlation between the tilt anomaly on the vertical pendulum at the Songpan station and the 2021 MS7.4 Maduo earthquake in Qinghai province,China

Understanding the relationship between precursory deformation anomalies and strong earthquakes is vital for physical earthquake prediction. Six months before the 2021 M_S7.4 Maduo earthquake in Qinghai province, China, the vertical pendulum at the Songpan station was observed to tilt southward with a high rate and large amplitude. Studies conducted before the 2021 M_S7.4 Maduo earthquake inferred the tilt anomaly to be an earthquake precursor. However, after the earthquake, the relation between the earthquake and the anomaly became controversial, partly because the Songpan station is located at a great distance from the epicenter. In this study, based on the deformation anomaly characteristics, relationship between the seismogenic fault and the fault near the anomaly, and associated quantitative analyses, we concluded that this anomaly may be associated with the 2021 M_S7.4 Maduo earthquake. The duration and amplitude of this anomaly matched with the magnitude and epicenter distance of the Maduo earthquake. We have also interpreted the reason why the anomaly occurred near a fault that is obliquely intersected with the seismogenic fault and why the anomaly is located far from the earthquake epicenter.     

Focal mechanism and seismogenic structure of the Shiqu MS4.4 earthquake

The focal mechanism solution of the Shiqu M_S 4.4 earthquake occurred on May 16^th, 2017 in Sichuan Province is studied by the gCAP method using the waveform data from the regional seismic networks in Sichuan, Qinghai, Tibet and Gansu provinces. The strike/dip/dipping angle of the first nodal plane are 214°/80°/167° and those of the second nodal plane are 306°/77°/10°, the optimal centroid depth is 7.3 ​± ​0.6 ​km and the moment magnitude is M_W 4.5. Furthermore, the study investigates the robustness of the results against the error of crustal velocity structure, location, data quality and difference of seismic parameters, subsequently obtaining a stable resolved focal mechanism. According to the geological structure in the seismogenic area, spatial distribution of aftershock sequenceof the regional tectonic stress field, and the focal mechanism of the main shock, we suggest that the Shiqu earthquake is induced by a left-lateral strike-slip mechanism and the second nodal plane is inferred to be the seismogenic fault, consistent with the geometry of the Changshagongma fault which is the secondary fault of the northwest part of the Xianshuihe fault zone.     

Determination of focal depth by two waveformbased methods: A case study for the 2008Panzhihua earthquake

With the 2008 M_S6.1 Panzhihua earthquake as a case study, we demonstrate that the focal depth of the main shock can be well constrained with two approaches: (1) using the depth phase sPL and (2) using full waveform inversion of local and teleseismic data. We also show that focal depths can be well constrained using the depth phase sPL with single broadband seismic station. Our study indicates that the main shock is located at a depth of 11 km, much shallower than those from other studies, confirming that the earthquake occurs in upper crust. Aftershocks are located in the depth range of 11-16 km, which is consistent with a ruptured near vertical fault whose width is about 10 km, as expected for an M_S6.1 earthquake.     

运用InSAR技术解算四川长宁MS6.0地震三维形变场及时间序列形变分析

运用升、降轨Sentinel-1A 卫星的差分干涉影像,获取2019-06-17四川宜宾长宁 MS6．0地震的三维同震形变场.在此基础上,以升降轨同震形变数据为约束条件,基于 Okada弹性半空间位错模型反演得到发震断层符合走滑和逆冲特征,断层破裂尺度约为15km×20km,断层滑动角为 44．37°,断层倾角为56．42°,震源深度约为10．2km,矩震级为 M W5．8.最后,采用SBAS-InSAR 技术获取该地区2019-04-05至2019-08-03各时间段的累计形变,结果认为该区域在震前近场形变波动较小,震后一段时间累积形变增长,分析原因可能是余震分布使得地表变化处于不稳定状态.通过与已有研究文献的比较和对该区域断层构造的分析,推测此次长宁地震发震断层由反演出的断层滑动引起,滑动面上缘接近地表,主震引起的次级断层活动触发短期内强余震频发.     

Moment tensor inversion and source rupture process of the September 27, 2003 M S=7.9 earthquake occurred in the border area of China, Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

Characteristics of InSAR Coseismic Deformation and Slip Distribution of the Akto MS6.7 Earthquake,Xinjiang

The Akto M_S6. 7 earthquake occurred near the western end of the Muji fault basin in the top of the Pamir syntaxis. The main shock of this earthquake is complicated and the focal mechanism solutions based on the seismic wave inversions are different. Based on the Sentinel-1 SAR data,the coseismal deformation field of the earthquake is obtained by In SAR technique. Based on the elastic half-space dislocation model,the geometrical parameters and the slip distribution model are determined by nonlinear and linear inversion algorithms. The results show that the distributed slip model can well explain the coseismic deformation field. The earthquake includes at least two rupture events,which are located at 7 km(74. 11°E,39. 25°N)and 33 km(74. 49°E,39. 16°N)east from the epicenter according to the CENC. The deformation field caused by the earthquake shows a symmetry distribution,with the maximum LOS deformation of 20 cm. The main seismic slip is concentrated in the 0-20 km depth,and the maximum slip is 0. 84 m. The seismic fault is the Muji fault,and this earthquake indicates that the northeastward push of the Indian plate is enhanced.     

Three-dimensional velocity structure around the focal area of the 2021 MS6.4 Yangbi earthquake

On May 21, 2021, an M_S6.4 earthquake occurred in Yangbi, Yunnan province, China, which exhibited typical foreshock-mainshock-aftershock characteristics. To better understand the velocity structure of the focal area and adjacent fault zones, Pg/Sg travel times at 12 seismic stations for the local earthquakes with M_L ≥ 1.5 from 2009–2019 and the Yangbi sequence in May of 2021 were used to invert the three-dimensional (3D) structures for both v_P and v_P/v_S. The obtained structure extends deeply to 15 km for area (25°N–26.5°N, 99.5°E–101°E) at a horizontal resolution of 10× 10 km, and the accuracy of the v_P velocity was verified using airgun signals excited by the Binchuan Airgun Transmitting Seismic Station (BATSS). The resulting v_P and v_P/v_S images correlate with existing fault zones and the Yangbi sequence, including: (1) The shallow velocity structure at 0 km agrees with local topography, where the Binchuan basin exhibits low-v_P and high-v_P/v_S values. From 3–15 km, v_P and v_P/v_S show variations, and the boundaries are consistent with the main faults (e.g., the Weixi-Qiaohou-Weishan, Honghe, and Chenghai faults). (2) The largest foreshock (M_S5.6), mainshock (M_S6.4), and largest aftershock (M_S5.2) occurred near the boundaries where both v_P and v_P/v_S have clear contrasts. (3) Small earthquakes are also concentrated in the transition zone between high- and low-v_P and v_P/v_S anomalies, and are biased toward low-v_P/v_S zones. (4) Boundaries in v_P and v_P/v_S are observed at 20 km west of the Weixi-Qiaohou-Weishan fault, indicating that there may exist one hidden fault.