Interaction between lateral sorting in river bends and vertical sorting in dunes

Sediment is sorted in river bends under the influence of gravity that pulls the heavier grains downslope and secondary flow that drags the finer grains upslope. Furthermore, when dunes are present, sediment is also sorted vertically at the dune lee side. However, sorting functions are poorly defined, since the relation to transverse bed slope and the interaction between lateral and vertical sorting is not yet understood for lack of data under controlled conditions. The objective of this study is to describe lateral sorting as a function of transverse bed slope and to gain an understanding of the interaction between lateral and vertical sorting in river bends. To this end, experiments were conducted with a poorly sorted sediment mixture in a rotating annular flume in which secondary flow intensity can be controlled separately from the main flow velocity, and therefore transverse bed slope towards the inner bend and dune dimensions can be systematically varied. Sediment samples were taken along cross-sections at the surface of dune troughs and dune crests, and over the entire depth at the location of dune crests (bulk samples), which enabled comparison of the relative contribution of vertical sorting by dunes to lateral sorting by the transverse bed slope. The data show that lateral sorting is always the dominant sorting mechanism in bends, and bulk samples showed minor effects of vertical sorting by dunes as long as all grain-size fractions are mobile. An empirical bend sorting model was fitted that redistributes the available sediment fractions over the cross-section as a function of transverse bed slope. Comparison with field data showed that the model accurately reproduces spatially-averaged trends in sorting at the bend apex in single-thread channels. The bend sorting model therefore provides a better definition of bend sorting with conservation of mass by size fraction and adds to current understanding of bend sorting. The implication for numerical modelling is that bend sorting mechanisms can be modelled independently of dunes, allowing the application of the active layer concept.     

Experimental verification of aeolian saltation and lee side deposition models

We report results of experiments intended to test the validity of a model for aeolian saltation and the resulting pattern of deposition on the lee side of aeolian dunes. In steady sea-breeze conditions on a 3-m-tall dune at Point Año Nuevo, California, we measured simultaneously the near-brink wind speed and the deposition on both horizontal and lee face collector platforms. We then used the details of the deposition patterns to constrain approximate values of parameters in a numerical model of the deposition rate that incorporates the essence of the saltation process. Best fits to the data constrain a parameter that controls the probability distribution of liftoff speeds. In addition, the total vertical number flux of grains is constrained to roughly 10⁷?10⁸ grains m^?2 s^?1 at shear velocities of 0.33–0.40 m s^?1. The lee side deposition pattern, which shows the expected maximum in deposition rate at a distance of several decimetres from the brink, is also well fit by the model. In addition, simultaneous collection of horizontal and lee deposition patterns, along with the numerical simulation of these patterns, strongly implies that the windfield in the lee of this particular dune is best described as a non-recirculating wake. Grainflows on the lee face are caused by failure of grainfall depositional bumps. Our results suggest that the principal effect of increased wind speed is to increase the frequency of grainflows. rather than to increase their size, implying that very large, thick grainflows require a different mechanism.     

Autocyclic behaviour of fan deltas: an analogue experimental study

Fan deltas are excellent recorders of fan‐building processes because of their high sedimentation rate, particularly in tectonically active settings. Although previous research focuses mainly on allogenic controls, there is clear evidence for autogenically produced storage and release of sediment by flume and numerical modelling that demands further definition of characteristics and significance of autogenically forced facies and stratigraphy. Analogue experiments were performed on fan deltas with constant extrinsic variables (discharge, sediment supply, sea‐level and basin relief) to demonstrate that fan‐delta evolution consists of prominent cyclic alternations of channellized flow and sheet flow. The channellized flow is initiated by slope‐induced scouring and subsequent headward erosion to form a channel that connected with the valley, while the removed sediment is deposited in a rapidly prograding delta lobe. The resulting decrease in channel gradient causes a reduction in flow strength, mouth‐bar formation, flow bifurcation and progressive backfilling of the channel. In the final stage of channel filling, sheet flow coexists for a while with channellized flow (semi‐confined flow), although in cycle 1 this phase of semi‐confined flow was absent. Subsequent autocyclic incisions are very similar in morphology and gradient. However, they erode deeper into the delta plain and, as a result, take more time to backfill. The duration of the semi‐confined flow increases with each subsequent cycle. During the period of sheet flow, the delta plain aggrades up to the ‘critical’ gradient required for the initiation of autocyclic incision. This critical gradient is dependent on the sediment transport capacity, defined by the input conditions. These autogenic cycles of erosion and aggradation confirm earlier findings that storage and release of sediment and associated slope variation play an important role in fan‐delta evolution. The erosional surfaces produced by the autocyclic incisions are well‐preserved by the backfilling process in the deposits of the fan deltas. These erosional surfaces can easily be misinterpreted as climate, sea‐level or tectonically produced bounding surfaces.     

大理冲积扇含水层非均质性分布规律研究

洪-冲积扇的非均质性分布规律对含水层渗流和污染物迁移研究、地下水污染管理、控制及修复具有重要意义。本文以大理点苍山东麓隐仙溪洪-冲积扇为例,对其水动力条件、沉积构造模型、地形坡度与运移距离的关系进行探讨。研究表明,冲积扇沉积非均质受水动力条件影响,当水动力较好时,沉积颗粒物为砾石和漂砾,填充泥质和粉砂质,水动力较弱时沉积多为砂质和粘土颗粒,扇面整体以水流河道为中心轴呈扇形沉积;冲积扇沉积颗粒物的分选性和磨圆度受地形坡度的影响,地形坡度大沉积颗粒物分选性和磨圆度差,搬运距离越远分选性和磨圆度越好;扇顶因水动力强,坡度大,沉积物分选性和磨圆度差,层理不发育,扇中扇缘随着水动力条件及地形坡度减弱,沉积物分选性和磨圆度逐渐变好,层理较为发育,沉积为水平或均匀层理。     

Morphological expression of bedforms formed by supercritical sediment density flows on four fjord‐lake deltas of the south‐eastern Canadian Shield (Eastern Canada)

High‐resolution swath bathymetry data collected in fjord‐lakes Pentecôte, Walker and Pasteur (eastern Québec, Canada) allowed imaging in great detail the deltas of four rivers in order to understand the factors controlling the formation and downslope evolution of bedforms present on their slopes. The morphometry and morphology of 199 bedforms reflect the behaviour of sediment density flows. The shape of the bedforms, mostly crescentic, and the relationships between their morphological properties indicate that they were formed by supercritical density flows and that they are cyclic steps. The crescentic shape suggests an upslope migration while the aspect ratios and increasing wavelengths with distance from the shore (and decreasing slopes) are compatible with a cyclic step origin. At the rollover point, the acceleration of the density flows on steep slopes produces tightly spaced hydraulic jumps and favours short wavelength and symmetrical bedforms. Further downslope, decreasing slopes and increasing specific discharge increase the wavelength and asymmetry of the bedforms. The wavelength and asymmetry are increased because density flows require longer distances to become supercritical again on lower slopes after each successive hydraulic jump. Bedform morphometry and morphology are used to reconstruct density flow behaviour downslope. Froude numbers are high near the rollover point and gradually decrease downslope as the slope becomes gentler. Conversely, the specific discharge and flow depth are low near the rollover point and gradually increase downslope as the flow either erodes sediments or becomes more dilute due to sediment deposition and water entrainment. The supercritical density flows are believed to be triggered mainly by hyperpycnal flows but some evidence of delta‐front slope failures is also observed. The differences in delta morphology and bedform development between the four deltas are linked to basin morphology and watershed hydrology, but also mainly to the fjord heritage of the lakes that allowed the focusing of sediment at the delta front.     

Flow and sediment transport over large subaqueous dunes: Fraser River, Canada

Large symmetric and asymmetric dunes occur in the Fraser River, Canada. Symmetric dunes have stoss and lee sides of similar length, stoss and lee slope angles <8°, and rounded crests. Asymmetric dunes have superimposed small dunes on stoss sides, sharp crests, stoss sides longer than lee sides, stoss side slopes <3° and straight lee side slopes up to 19°. There is no evidence for lee side flow separation, although intermittent separated flow is possible, especially over asymmetric dunes. Dune symmetry and crest rounding of symmetric dunes are associated with high sediment transport rates. High near-bed velocity and bed load transport near dune crests result in crest rounding. Long, low-angle lee sides are produced by deposition of suspended sediment in dune troughs. Asymmetric dunes appear to be transitional features between large symmetric dunes and smaller dunes adjusted to lower flow velocity and sediment transport conditions. Small dunes on stoss sides reduce near-bed flow velocity and bed load transport, causing a sharper dune crest. Reduced deposition of suspended sediment in troughs results in a short, steep lee slope. Dunes in the Fraser River fall into upper plane bed or antidune stability fields on flume-based bedform phase diagrams. These diagrams are probably not applicable to large dunes in deep natural flows and care must be taken in modelling procedures that use phase diagram relations to predict bed configuration in such flows.     

珠江口盆地白云南洼珠海组陆架边缘三角洲沉积体系演化

珠江口盆地白云南洼珠海组发育陆架边缘三角洲,其不仅是深水区勘探重要的油气储层类型,也是沉积地质学和石油地质学研究的热点。根据高精度三维地震资料,应用三级层序格架内等时地层切片技术,对珠江口盆地白云南洼珠海组陆架边缘三角洲的沉积结构和平面演化开展了详细研究。研究表明,区内存在北部和西北部两个物源方向的陆架边缘三角洲物源供给体系,进而形成连续4期三角洲前积复合体,各期次通过解剖三角洲前积结构和叠置样式可细分为2~5套三角洲前积体,地震上表现为切线斜交型和S型反射结构。不同物源供给体系下的三角洲进积和加积速率差异明显,根据陆架边缘三角洲的演化阶段可划分为初始形成期、发展期和稳定期三个阶段。初始形成期为珠海组四段中晚期,三角洲垂向上均表现为进积,平面上北部物源供给的陆架边缘三角洲形成面积小,西北部物源供给的三角洲面积相对大;发展期为珠海组三段,三角洲垂向上进积和加积均存在,陆架边缘三角洲沉积厚度达到最大,平面上北部物源供给的陆架边缘三角洲—深水扇体系发育一定规模,西北部物源供给的陆架三角洲前缘发育陆架条带砂脊;稳定期为珠海组二段和一段,三角洲垂向结构表现为先进积后加积,三角洲前缘规模变大,陆坡水道和深水扇最为发育。珠海组时期陆架边缘三角洲形成演化受双物源差异供给、相对海平面的先升后降和构造活动的相对稳定共同控制。北部物源供给的珠海组陆架边缘三角洲—深水陆坡沉积体系可作为区内最有利的油气勘探目标。     

Transition from storm wave‐dominated outer shelf to gullied upper slope: The mid‐Pliocene Orinoco shelf margin,South Trinidad

Shelf‐edge deltas are a key depositional environment for accreting sediment onto shelf‐margin clinoforms. The Moruga Formation, part of the palaeo‐Orinoco shelf‐margin sedimentary prism of south‐east Trinidad, provides new insight into the incremental growth of a Pliocene, storm wave‐dominated shelf margin. Relatively little is known about the mechanisms of sand bypass from the shelf‐break area of margins, and in particular from storm wave‐dominated margins which are generally characterized by drifting of sand along strike until meeting a canyon or channel. The studied St. Hilaire Siltstone and Trinity Hill Sandstone succession is 260 m thick and demonstrates a continuous transition from gullied (with turbidites) uppermost slope upward to storm wave‐dominated delta front on the outermost shelf. The basal upper‐slope deposits are dominantly mass‐transport deposited blocks, as well as associated turbidites and debrites with common soft‐sediment‐deformed strata. The overlying uppermost slope succession exhibits a spectacular set of gullies, which are separated by abundant slump‐scar unconformities (tops of rotational slides), then filled with debris‐flow conglomerates and sandy turbidite beds with interbedded mudstones. The top of the study succession, on the outer‐shelf area, contains repeated upward‐coarsening, sandstone‐rich parasequences (2 to 15 m thick) with abundant hummocky and swaley cross‐stratification, clear evidence of storm‐swell and storm wave‐dominated conditions. The observations suggest reconstruction of the unstable shelf margin as follows: (i) the aggradational storm wave‐dominated, shelf‐edge delta front became unstable and collapsed down the slope; (ii) the excavated scars of the shelf margin became gullied, but gradually healed (aggraded) by repeated infilling by debris flows and turbidites, and then new gullying and further infilling; and (iii) a renewed storm wave‐dominated delta‐front prograded out across the healed outer shelf, re‐establishing the newly stabilized shelf margin. The Moruga Formation study, along with only a few others in the literature, confirms the sediment bypass ability of storm wave‐dominated reaches of shelf edges, despite river‐dominated deltas being, by far, the most efficient shelf‐edge regime for sediment bypass at the shelf break.     

Gilbert‐type deltas recording short‐term base‐level changes: Delta‐brink morphodynamics and related foreset facies

Gilbert‐type deltas are sensitive recorders of short‐term base‐level changes, but the delta‐front record of a base‐level rise tends to be erased by fluvial erosion during a subsequent base‐level fall, which renders the bulk record of base‐level changes difficult to decipher from the delta‐front deposits. The present detailed study of three large Pleistocene Gilbert‐type deltas uplifted on the southern coast of the Gulf of Corinth, Greece, indicates a genetic link between the delta‐front morphodynamic responses to base‐level changes and the delta‐slope sedimentation processes. Sigmoidal delta‐brink architecture signifies a base‐level rise and is accompanied by a debrite‐dominated assemblage of delta foreset deposits, thought to form when the aggrading delta front stores sediment and undergoes discrete gravitational collapses. Oblique delta‐brink architecture tends to be accompanied by a turbidite‐dominated assemblage of foreset deposits, which are thought to form when the delta‐front accommodation decreases and the sediment carried by hyperpycnal effluent bypasses the front. This primary signal of the system response to base‐level changes combines further with the secondary ‘noise’ of delta autogenic variation and possible allogenic fluctuations in fluvial discharge due to regional climatic conditions. Nevertheless, the evidence suggests that the facies trends of delta foreset deposits may be used to decipher the delta ‘hidden’ record of base‐level changes obliterated by fluvial topset erosion. Early‐stage bayhead deltas may be an exception from the hypothetical model, because their narrow front tends to be swept by river floods irrespective of base‐level behaviour and their subaqueous slope deposits are thus mainly turbidites.     

On the relationship between flow and suspended sediment transport over the crest of a sand dune, Río Paraná, Argentina

The links between large‐scale turbulence and the suspension of sediment over alluvial bedforms have generated considerable interest in the last few decades, with past studies illustrating the origin of such turbulence and its influence on flow resistance, sediment transport and bedform morphology. In this study of turbulence and sediment suspension over large sand dunes in the Río Paraná, Argentina, time series of three‐dimensional velocity, and at‐a‐point suspended sediment concentration and particle‐size, were measured with an acoustic Doppler current profiler and laser in situ scattering transmissometer, respectively. These time series were decomposed using wavelet analysis to investigate the scales of covariation of flow velocity and suspended sediment. The analysis reveals an inverse relationship between streamwise and vertical velocities over the dune crest, where streamwise flow deceleration is linked to the vertical flux of fluid towards the water surface in the form of large turbulent fluid ejections. Regions of high suspended sediment concentration are found to correlate well with such events. The frequencies of these turbulent events have been assessed from wavelet analysis and found to concentrate in two zones that closely match predictions from empirical equations. Such a finding suggests that a combination and interaction of vortex shedding and wake flapping/changing length of the lee‐side separation zone are the principal contributors to the turbulent flow field associated with such large alluvial sand dunes. Wavelet analysis provides insight upon the temporal and spatial evolution of these coherent flow structures, including information on the topology of dune‐related turbulent flow structures. At the flow stage investigated, the turbulent flow events, and their associated high suspended sediment concentrations, are seen to grow with height above the bed until a threshold height (ca 0·45 flow depth) is reached, above which they begin to decay and dissipate.     

Formation and preservation of open-framework gravel strata in unidirectional flows

Open‐framework gravel (OFG) in river deposits is important because of its exceptionally high permeability, resulting from the lack of sediment in the pore spaces between the gravel grains. Fluvial OFG occurs as planar strata and cross strata of varying scale, and is interbedded with sand and sandy gravel. The origin of OFG has been related to: (1) proportion of sand available relative to gravel; (2) separation of sand from gravel during a specific flow stage and sediment transport rate (either high, falling or low); (3) separation of sand from gravel in bedforms superimposed on the backs of larger bedforms; (4) flow separation in the lee of dunes or unit bars. Laboratory flume experiments were undertaken to test and develop these theories for the origin of OFG. Bed sediment size distribution (sandy gravel with a mean diameter of 1·5 mm) was kept constant, but flow depth, flow velocity and aggradation rate were varied. Bedforms produced under these flow conditions were bedload sheets, dunes and unit bars. The fundamental cause of OFG is the sorting of sand from gravel associated with flow separation at the crest of bedforms, and further segregation of grain sizes during avalanching on the steep lee side. Sand in transport near the bed is deposited in the trough of the bedform, whereas bed‐load gravel avalanches down the leeside and overruns the sand in the trough. The effectiveness of this sorting mechanism increases as the height of the bedform increases. Infiltration of sand into the gravel framework is of minor importance in these experiments, and occurs mainly in bedform troughs. The geometry and proportion of OFG in fluvial deposits are influenced by variation in height of bedforms as they migrate, superposition of small bedforms on the backs of larger bedforms, aggradation rate, and changes in sediment supply. If the height of a bedform increases as it migrates downstream, so does the amount of OFG. Changes in the character of OFG on the lee‐side of unit bars depend on grain‐size sorting in the superimposed bedforms (dunes and bedload sheets). Thick deposits of cross‐stratified OFG require high bedforms (dunes, unit bars) and large amounts of aggradation. These conditions might be expected to occur during high falling stages in the deeper parts of river channels adjacent to compound‐bar tails and downstream of confluence scours. Increase in the amount of sand supplied relative to gravel reduces the development of OFG. Such increases in sand supply may be related to falling flow stage and/or upstream erosion of sandy deposits.     

Contrasting morphodynamics in alluvial fans and fan deltas: effect of the downstream boundary

Alluvial fans and fan deltas can, in principle, have exactly the same upstream conditions, but fan deltas by definition have ponding water at their downstream boundary. This ponding creates effects on the autogenic behaviour of fan deltas, such as backwater adaptation, mouth bars and backward sedimentation, whereas alluvial fans may lack these effects. Hence the present authors hypothesize that morphodynamics on alluvial fans are determined primarily by upstream boundary conditions, whereas morphodynamics on fan deltas are determined by both the upstream and the downstream boundary condition and changes therein. To isolate the effects of the upstream and downstream boundaries, five new alluvial fan experiments are compared with the details of three fan deltas published earlier that were formed under very similar and simple conditions. Similar to the fan deltas, the alluvial fans build up by sheet flow, whilst quasi‐regular periods of incision cause temporary channelized flow. Incision is followed by channel backfilling, after which the fan returns to sheet flow. The channelization and backfilling in alluvial fans is markedly less pronounced and more prone to autogenic disturbance than in fan deltas. The difference is caused by morphodynamics at the downstream boundary. In a fan delta, the flow expansion of the channel causes deposition of all the sediment, which forms a mouth bar and causes strong backfilling. In an alluvial fan, on the other hand, the slope break at the fan perimeter causes some deposition, but transport is not reduced to zero. Consequently, the backfilling in alluvial fans is less pronounced than in fan deltas. Other published experiments support this trend: removal of the mouth bar by a river leads to permanent channelization, whilst pronounced mouth‐bar formation in highly channelized deltas promotes backward sedimentation. The experimental results for this study predict that, when alluvial fans prograde into lakes or deep rivers, they transition to fan deltas with increasingly deeper channels and thicker backfill deposits.     

Grainfall processes in the lee of transverse dunes, Silver Peak, Nevada

Grainfall deposition and associated grainflows in the lee of aeolian dunes are important in that they are preserved as cross‐beds in the geological record and provide a key to the interpretation of the aeolian rock record. Despite their recognized importance, there have been very few field, laboratory or numerical simulation studies of leeside depositional processes on aeolian dunes. As part of an ongoing study, the relationships among grainfall, wind (speed and direction), stoss sand transport rates and dune morphometry (height and aspect ratio) were investigated on four relatively small, straight‐crested transverse dunes at Silver Peak, Nevada. Between 55% and 95% of the total grainfall was found to be deposited within 1 m of the crest, and 84–99% within 2 m, depending primarily on dune size and shape. Grainfall decay rates on high dunes of large aspect ratio were observed to be very consistent, with a weak positive dependence on wind speed. For small dunes with low aspect ratios, grainfall deposition was more varied and decreased rapidly within 1 m of the dune crest, whereas at increased distance from the dune crest, it eventually approached the smaller decay rates observed on the large dunes. No dependence of grainfall on wind speed was observed for these small dunes. Comparison of field data with predictions from 1 ) saltation model of grainfall, based on the computation of saltation path lengths, indicates lack of agreement in the following areas: (1) deposition rate magnitude; (2) variation in decay rate with wind speed; and (3) the magnitude and location of the localized lee‐slope depositional maxima. The Silver Peak field results demonstrate the importance of dune aspect ratio and related wake effects in determining the rate and pattern of grainfall. This work confirms earlier speculation by 7 ) that temporary, turbulent suspension (or `modified saltation') of relatively large grains does occur within the dune wake, so that transport distances generally are larger than predicted by numerical simulations of `true' saltation.     

陆相湖盆大型扇三角洲沉积特征与演化规律

准噶尔盆地玛湖凹陷西斜坡下三叠统百口泉组内,发育了世界上罕见的、最典型的大型扇三角洲。在岩芯沉积特征观察、岩石粒度与成分分析等基础上,结合测、钻井资料等,对该大型湖相扇三角洲的沉积特征与演化规律开展系统的研究,并建立了沉积与演化模式。结果表明:百口泉组沉积时期,玛西斜坡区发育了两个大型扇三角洲,其延伸距离可大于40 km;该扇三角洲相包含扇三角洲平原、扇三角洲前缘及前扇三角洲3个亚相,以及泥石流、扇面河道、碎屑流、水下分流河道、河口砂坝及前扇三角洲泥等9个微相;该扇三角洲富含砾质,总体上以重力流沉积（泥石流和碎屑流微相）的砾岩与牵引流沉积（扇面河道和水下分流河道微相）的砾岩、含砾砂岩交替叠置为特点;前缘环境的水下分流河道延伸近二十千米,且一直保持以砾质为主;纵向上,自百一段到百三段,该扇三角洲表现为典型的连续退积式,沉积演化规律十分清楚,其中,百一段沉积时期,该扇三角洲以扇三角洲平原占据主导地位,至百三段沉积时期,该扇三角洲则演化为以扇三角洲前缘为主,得益于水下分流河道的长距离延伸,使其依然保持为大型的扇三角洲。     

Morphology and curvature of delta slopes in Swiss lakes: lessons for the interpretation of clinoforms in seismic data

Seismic surveys were conducted and bathymetric data obtained from four alpine lakes in Switzerland. The curvature of the delta slopes was analysed with mathematical equations. Linear or exponential profiles are observed, representing planar or concave morphologies respectively. Planar profiles are interpreted to represent sediment that rests at the angle-of-repose. The slope angle of these profiles shows a correlation with sediment calibre. Exponential profiles do not show a clear correlation between sediment calibre and slope angle; they do not rest at the angle-of-repose, and different kinds of sediment can rest at the same slope angle. At the transition from lower slope to toe- of-slope, the exponential equation fails to predict the present-day morphology. The toe-of-slope lies above the predicted trend. This is attributed to a drastic increase in turbidite deposition that provides additional sediment and raises the basin-floor profile above the predicted trend. The breaks between delta plain and slope are sharp, reflecting an abrupt change from transport by river flow and waves to gravity-driven transport. In these lakes, the base-level fluctuations relative to supply are small and insufficient to alter this sharp topographic break. The absence of sigmoidal profiles on the Swiss deltas is attributed to the high rate of progradation coupled with small fluctuations in base level.     

中国东部箕状断陷湖盆扇三角洲与辫状河三角洲对比研究

中国东部箕状断陷湖盆短轴方向,常常发育扇三角洲和辫状河三角洲,二者均可形成良好的油气储集体,但在岩芯以及地球物理资料的识别上常常容易混淆。通过对它们沉积特征、地球物理资料特征、含油气性和控制因素的对比研究和分析认为:扇三角洲是陡坡带冲积扇直接入湖形成,地震反射特征为楔形前积,沉积物成分成熟度和结构成熟度均低于辫状河三角洲,沉积特征反映重力流和牵引流双重作用;辫状河三角洲是缓坡带辫状河入湖形成的三角洲,向湖盆方向推进较远,地震反射特征为叠瓦前积,沉积特征反映牵引流作用。扇三角洲易形成构造-岩性油气藏和岩性油气藏,有利相带为扇三角洲前缘水下分流河道、席状砂以及前扇三角洲容易发育的滑塌浊积扇;辫状河三角洲易形成地层-岩性油气藏和岩性油气藏,有利相带为辫状河三角洲平原辫状分流河道,辫状河三角洲前缘水下分流河道、河口坝、席状砂以及半深湖中的浊积岩体。古气候变化、构造-古地貌以及湖平面变化速率三者共同作用于扇三角洲和辫状河三角洲的沉积特征,其中构造-古地貌是主控因素。结合二者沉积特征差异,建立了中国东部箕状断陷湖盆扇三角洲和辫状河三角洲沉积模式图,以期能对相似构造背景下扇三角洲和辫状河三角洲的分析与研究提供一定的指导作用。     

Facies characteristics and architecture related to palaeodepth of Holocene fjord–delta sediments

Lithofacies characteristics and depositional geometry of a sandy, prograding delta deposited as part of the Holocene valley‐fill stratigraphy in the Målselv valley, northern Norway, were examined using morpho‐sedimentary mapping, facies analysis of sediments in exposed sections, auger drilling and ground penetrating radar survey. Various lithofacies types record a broad range of depositional processes within an overall coarsening‐upward succession comprising a lowermost prodelta/bottomset unit, an intermediate delta slope/foreset unit containing steeply dipping clinoforms and an uppermost delta plain/topset unit. Bottomset lithofacies typically comprise sand‐silt couplets (tidal rhythmites), bioturbated sands and silts, and flaser and lenticular bedding. These sediments were deposited from suspension fall‐out, partly controlled by tidal currents and fluvial effluent processes. Delta foreset lithofacies comprise massive, inverse graded and normal graded beds deposited by gravity‐driven processes (mainly cohesionless debris flows and turbidity currents) and suspension fall‐out. In places, delta foreset beds show tidal rhythmicity and individual beds can be followed downslope into bottomset beds. Delta plain facies show an upward‐fining succession with trough cross‐beds at the base, followed by planar, laminated and massive beds indicative of a bedload dominated river/distributary system. This study presents a model of deltaic development that can be described with reference to three styles within a continuum related primarily to water depth within a basin of variable geometry: (i) bypass; (ii) shoal‐water; and (iii) deep‐water deltas. Bypass and deep‐water deltas can be considered as end members, whereas shoal‐water deltas are an intermediate type. The bypass delta is characterized by rapid progradation and an absence of delta slope sediments and low basin floor aggradation due to low accommodation space. The shoal‐water delta is characterized by rapid progradation, a short delta slope dominated by gravity‐flow processes and a prodelta area characterized by rapid sea‐floor aggradation due to intense suspension fallout of sandy material. Using tidal rhythmites as time‐markers, a progradation rate of up to 11 m year^?1 has been recorded. The deep‐water delta is characterized by a relatively long delta slope dominated by gravity flows, moderate suspension fall‐out and slow sea‐floor aggradation in the prodelta area.     

A model for the growth and development of wave-dominated deltas fed by small mountainous rivers: Insights from the Elwha River delta,Washington

Observations from ground-penetrating radar, sediment cores, elevation surveys and aerial imagery are used to understand the development of the Elwha River delta in north-western Washington, USA, which prograded as a result of two dam removals in late 2011. Swash-bar, foreshore and swale depositional elements are recognized within ground-penetrating radar profiles and sediment cores. A model for the growth and development of small mountainous river wave-dominated deltas is proposed based on observation of both the fluvial and deltaic settings. If enough sediment is available in the fluvial system, mouth-bars form after higher than average river discharge events, creating a large platform seaward of the subaqueous delta plain. Swash-bars form concurrently or within a month of mouth-bar deposition as a result of wave action. Fair-weather waves drive swash-bar migration landward and in the direction of littoral drift. The signature of swash-bar welding to the shoreline is landward-dipping reflections, as a result of overwash processes and slipface migration. However, most swash-bars are eroded by the river mouth, as only 10 of the 37 swash-bars that formed between August 2011 and July 2016 survived within the Elwha River delta. The swash-bars that do survive either amalgamate onto the shoreline or an earlier deposited swash-bar, forming a single larger barrier at the delta front. In asymmetrical deltas, the signature of swash-bar welding is more likely to be preserved on the downdrift side of the delta, where formation is more likely and accommodation behind newer swash-bars preserves older deposits. On small mountainous river deltas, welded swash-bars may be more indicative of a large sediment pulse to the system, rather than large hydrological events.     

陆相断陷盆地陡坡带早期大型斜向扇三角洲的发现及其勘探潜力

现今我国东部断陷盆地油气勘探已达到较高的程度,目的 层系逐渐向深部转移,是东部断陷盆地下一步主要勘探方向之一.断陷湖盆陡坡带早期发育短轴物源形成的垂直于边界断层的近岸水下扇、扇三角洲和湖底扇,但对于陡坡带其他方向的沉积相类型及其勘探潜力研究较少.本文依据断陷湖盆沉积学原理,采用地震地层学方法,对我国东部典型断陷湖盆陡坡...