Ocean tide loading (OTL) displacements from global and local grids: comparisons to GPS estimates over the shelf of Brittany, France

In this paper we examine OTL displacements detected by GPS stations of a dedicated campaign and validate ocean tide models. Our area of study is the continental shelf of Brittany and Cotentin in France. Brittany is one of the few places in the world where tides provoke loading displacements of ∼10–12 cm vertically and a few cm horizontally. Ocean tide models suffer from important discrepancies in this region. Seven global and regional ocean tide models were tested: FES2004 corrected for K2, TPXO.7.0, TPXO.6.2, GOT00.2, CSR4.0, NAO.99b and the most recent regional grids of the North East Atlantic (NEA2004). These gridded amplitudes and phases of ocean tides were convolved in order to get the predicted OTL displacements using two different algorithms. Data over a period of 3.5 months of 8 GPS campaign stations located on the north coast of Brittany are used, in order to evaluate the geographical distribution of the OTL effect. We have modified and implemented new algorithms in our GPS software, GINS 7.1. GPS OTL constituents are estimated based on 1-day batch solutions. We compare the observed GPS OTL constituents of M₂, S₂, N₂ and K₁ waves with the selected ocean tide models on global and regional grids. Large phase-lag and amplitude discrepancies over 20° and 1.5 cm in the vertical direction in the semi-diurnal band of M₂ between predictions and GPS/models are detected in the Bay of Mont St-Michel. From a least squares spectral analysis of the GPS time-series, significant harmonic peaks in the integer multiples of the orbital periods of the GPS satellites are observed, indicating the existence of multipath effects in the GPS OTL constituents. The GPS OTL observations agree best with FES2004, NEA2004, GOT00.2 and CSR4.0 tide models.     

Local geoid determination combining gravity disturbances and GPS/levelling: a case study in the Lake Nasser area, Aswan, Egypt

 The use of GPS for height control in an area with existing levelling data requires the determination of a local geoid and the bias between the local levelling datum and the one implicitly defined when computing the local geoid. If only scarse gravity data are available, the heights of new data may be collected rapidly by determining the ellipsoidal height by GPS and not using orthometric heights. Hence the geoid determination has to be based on gravity disturbances contingently combined with gravity anomalies. Furthermore, existing GPS/levelling data may also be used in the geoid determination if a suitable general gravity field modelling method (such as least-squares collocation, LSC) is applied. A comparison has been made in the Aswan Dam area between geoids determined using fast Fourier transform (FFT) with gravity disturbances exclusively and LSC using only the gravity disturbances and the disturbances combined with GPS/levelling data. The EGM96 spherical harmonic model was in all cases used in a remove–restore mode. A total of 198 gravity disturbances spaced approximately 3 km apart were used, as well as 35 GPS/levelling points in the vicinity and on the Aswan Dam. No data on the Nasser Lake were available. This gave difficulties when using FFT, which requires the use of gridded data. When using exclusively the gravity disturbances, the agreement between the GPS/levelling data were 0.71 ± 0.17 m for FFT and 0.63 ± 0.15 for LSC. When combining gravity disturbances and GPS/levelling, the LSC error estimate was ±0.10 m. In the latter case two bias parameters had to be introduced to account for a possible levelling datum difference between the levelling on the dam and that on the adjacent roads. Received: 14 August 2000 / Accepted: 28 February 2001     

The northern European geoid: a case study on long-wavelength geoid errors

 The long-wavelength geoid errors on large-scale geoid solutions, and the use of modified kernels to mitigate these effects, are studied. The geoid around the Nordic area, from Greenland to the Ural mountains, is considered. The effect of including additional gravity data around the Nordic/Baltic land area, originating from both marine, satellite and ground-based measurements, is studied. It is found that additional data appear to increase the noise level in computations, indicating the presence of systematic errors. Therefore, the Wong–Gore modification to the Stokes kernel is applied. This method of removing lower-order terms in the Stokes kernel appears to improve the geoid. The best fit to the global positioning system (GPS) leveling points is obtained with a degree of modification of approximately 30. In addition to the study of modification errors, the results of different methods of combining satellite altimetry gravity and other gravimetry are presented. They all gave comparable results, at the 6-cm level, when evaluated for the Nordic GPS networks. One dimensional (1-D) and 2-D fast Fourier transform (FFT) methods are also compared. It is shown that even though methods differ by up to 6 cm, the fit to the GPS is essentially the same. A surprising conclusion is that the addition of more data does not always produce a better geoid, illustrating the danger of systematic errors in data. Received: 4 July 2001 / Accepted: 21 February 2002     

Assessment of three numerical solution strategies for gravity field recovery from GOCE satellite gravity gradiometry implemented on a parallel platform

 The recovery of a full set of gravity field parameters from satellite gravity gradiometry (SGG) is a huge numerical and computational task. In practice, parallel computing has to be applied to estimate the more than 90 000 harmonic coefficients parameterizing the Earth's gravity field up to a maximum spherical harmonic degree of 300. Three independent solution strategies (preconditioned conjugate gradient method, semi-analytic approach, and distributed non-approximative adjustment), which are based on different concepts, are assessed and compared both theoretically and on the basis of a realistic-as-possible numerical simulation regarding the accuracy of the results, as well as the computational effort. Special concern is given to the correct treatment of the coloured noise characteristics of the gradiometer. The numerical simulations show that the three methods deliver nearly identical results—even in the case of large data gaps in the observation time series. The newly proposed distributed non-approximative adjustment approach, which is the only one of the three methods that solves the inverse problem in a strict sense, also turns out to be a feasible method for practical applications. Received: 17 December 2001 / Accepted: 17 July 2002 Acknowledgments. We would like to thank Prof. W.-D. Schuh, Institute of Theoretical Geodesy, University of Bonn, for providing us with the serial version of the PCGMA algorithm, which forms the basis for the parallel PCGMA package developed at our institute. This study was partially performed in the course of the GOCE project `From E?tv?s to mGal+', funded by the European Space Agency (ESA) under contract No. 14287/00/NL/DC. Correspondence to: R. Pail     

Molodensky potential telluroid based on a minimum-distance map. Case study: the quasi-geoid of East Germany in the World Geodetic Datum 2000

 A potential-type Molodensky telluroid based upon a minimum-distance mapping is derived. With respect to a reference potential of Somigliana–Pizzetti type which relates to the World Geodetic Datum 2000, it is shown that a point-wise minimum-distance mapping of the topographical surface of the Earth onto the telluroid surface, constrained to the gauge W(P)=u(p), leads to a system of four nonlinear normal equations. These normal equations are solved by a fast Newton–Raphson iteration. Received: 7 February 2000 / Accepted: 23 October 2001