Determination of the properties of Mercury's magnetic field by the MESSENGER mission

The MESSENGER mission to Mercury, to be launched in 2004, will provide an opportunity to characterize Mercury's internal magnetic field during an orbital phase lasting one Earth year. To test the ability to determine the planetary dipole and higher-order moments from measurements by the spacecraft's fluxgate magnetometer, we simulate the observations along the spacecraft trajectory and recover the internal field characteristics from the simulated observations. The magnetic field inside Mercury's magnetosphere is assumed to consist of an intrinsic multipole component and an external contribution due to magnetospheric current systems described by a modified Tsyganenko 96 model. Under the axis-centered-dipole approximation without correction for the external field the moment strength is overestimated by ∼4% for a simulated dipole moment of , and the error depends strongly on the magnitude of the simulated moment, rising as the moment decreases. Correcting for the external field contributions can reduce the error in the dipole term to a lower limit of ∼1-2% without a solar wind monitor. Dipole and quadrupole terms, although highly correlated, are then distinguishable at the level equivalent to an error in the position of an offset dipole of a few tens of kilometers. Knowledge of the external magnetic field is therefore the primary limiting factor in extracting reliable knowledge of the structure of Mercury's magnetic field from the MESSENGER observations.     

Global MHD modeling of Mercury's magnetosphere with applications to the MESSENGER mission and dynamo theory

We use a global magnetohydrodynamic (MHD) model to simulate Mercury's space environment for several solar wind and interplanetary magnetic field (IMF) conditions in anticipation of the magnetic field measurements by the MESSENGER spacecraft. The main goal of our study is to assess what characteristics of the internally generated field of Mercury can be inferred from the MESSENGER observations, and to what extent they will be able to constrain various models of Mercury's magnetic field generation. Based on the results of our simulations, we argue that it should be possible to infer not only the dipole component, but also the quadrupole and possibly even higher harmonics of the Mercury's planetary magnetic field. We furthermore expect that some of the crucial measurements for specifying the Hermean internal field will be acquired during the initial fly-bys of the planet, before MESSENGER goes into orbit around Mercury.     

The space environment of Mercury at the times of the second and third MESSENGER flybys

The second and third flybys of Mercury by the MESSENGER spacecraft occurred, respectively, on 6 October 2008 and on 29 September 2009. In order to provide contextual information about the solar wind properties and the interplanetary magnetic field (IMF) near the planet at those times, we have used an empirical modeling technique combined with a numerical physics-based solar wind model. The Wang–Sheeley–Arge (WSA) method uses solar photospheric magnetic field observations (from Earth-based instruments) in order to estimate the inner heliospheric radial flow speed and radial magnetic field out to 21.5 solar radii from the Sun. This information is then used as input to the global numerical magnetohydrodynamic model, ENLIL, which calculates solar wind velocity, density, temperature, and magnetic field strength and polarity throughout the inner heliosphere. WSA-ENLIL calculations are presented for the several-week period encompassing the second and third flybys. This information, in conjunction with available MESSENGER data, aid in understanding the Mercury flyby observations and provide a basis for global magnetospheric modeling. We find that during both flybys, the solar wind conditions were very quiescent and would have provided only modest dynamic driving forces for Mercury's magnetospheric system.     

Magnetic field modulated dust streams from Jupiter in interplanetary space

High speed dust streams emanating from near Jupiter were first discovered by the Ulysses spacecraft in 1992. Since then the phenomenon has been re-observed by Galileo in 1995, Cassini in 2000, and Ulysses in 2004. The dust grains are expected to be charged to a potential of , which is sufficient to allow the planet's magnetic field to accelerate them away from the planet, where they are subsequently influenced by the interplanetary magnetic field (IMF). A similar phenomenon was observed near Saturn by Cassini. Here, we report and analyze simultaneous dust, IMF and solar wind data for all dust streams from the two Ulysses Jupiter flybys. We find that compression regions (CRs) in the IMF – regions of enhanced magnetic field – precede most dust streams. Furthermore, the duration of a dust stream is roughly comparable with that of the precedent CR, and the occurrence of a dust stream and the occurrence of the previous CR are separated by a time interval that depends on the distance to Jupiter. The intensity of the dust streams and their precedent CRs are also correlated, but this correlation is only evident at distances from the planet no greater than 2 AU. Combining these observations, we argue that CRs strongly affect dust streams, probably by deflecting dust grain trajectories, so that they can reach the spacecraft and be detected by its dust sensor.     

Mercury’s magnetospheric magnetic field after the first two MESSENGER flybys

The “paraboloid” model of Mercury’s magnetospheric magnetic field is used to determine the best-fit magnetospheric current system and internal dipole parameters from magnetic field measurements taken during the first and second MESSENGER flybys of Mercury on 14 January and 6 October 2008. Together with magnetic field measurements taken during the Mariner 10 flybys on 29 March 1974 and 16 March 1975, there exist three low-latitude traversals separated in longitude and one high-latitude encounter. From our model formulation and fitting procedure a Mercury dipole moment of 196 nT ·  (where R_M is Mercury’s radius) was determined. The dipole is offset from Mercury’s center by 405 km in the northward direction. The dipole inclination to Mercury’s rotation axis is relatively small, ∼4°, with an eastern longitude of 193° for the dipole northern pole. Our model is based on the a priori assumption that the dipole position and the moment orientation and strength do not change in time. The root mean square (rms) deviation between the Mariner 10 and MESSENGER magnetic field measurements and the predictions of our model for all four flybys is 10.7 nT. For each magnetic field component the rms residual is ∼6 nT or about 1.5% of the maximum measured magnetic field, ∼400 nT. This level of agreement is possible only because the magnetospheric current system parameters have been determined separately for each flyby. The magnetospheric stand-off distance, the distance from the planet’s center to the inner edge of the tail current sheet, the tail lobe magnetic flux, and the displacement of the tail current sheet relative to the Mercury solar-magnetospheric equatorial plane have been determined independently for each flyby. The magnetic flux in the tail lobes varied from 3.8 to 5.9 MWb; the subsolar magnetopause stand-off distance from 1.28 to 1.43 R_M; and the distance to the inner edge of the current sheet from 1.23 to 1.32 R_M. The differences in the current systems between the first and second MESSENGER flybys are attributed to the effects of strong magnetic reconnection driven by southward interplanetary magnetic field during the latter flyby.     

Mercury resolved spectroscopy from NTT

Mercury has been observed in June 2006 with the SofI instrument at NTT. Resolved spectroscopy was performed in the range. The observations were acquired close to a favorable quadrature with maximum elongation, and span mostly the southern hemisphere in the 235–315°E longitude area.In contrast to recent observations from IRTF, the present study does not indicate any pyroxene absorption in the near-infrared range, neither in the region nor at . Detailed spectral analysis allows to derive an upper limit of 1.5% type-A pyroxene (hedenbergite) or 1.1% enstatite (assuming minimum lunar iron content) in the regions observed, at the 700 km scale. Assuming lunar-like maturity effects on band depth, this corresponds to an upper limit of 0.15 and 0.6 wt.% FeO content in silicates, an order of magnitude less than previous estimates.     

The transition from complex crater to peak-ring basin on Mercury: New observations from MESSENGER flyby data and constraints on basin formation models

The study of peak-ring basins and other impact crater morphologies transitional between complex craters and multi-ring basins is important to our understanding of the mechanisms for basin formation on the terrestrial planets. Mercury has the largest population, and the largest population per area, of peak-ring basins and protobasins in the inner solar system and thus provides important data for examining questions surrounding peak-ring basin formation. New flyby images from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft have more than doubled the area of Mercury viewed at close range, providing nearly complete global coverage of the planet's surface when combined with flyby data from Mariner 10. We use this new near-global dataset to compile a catalog of peak-ring basins and protobasins on Mercury, including measurements of the diameters of the basin rim crest, interior ring, and central peak (if present). Our catalog increases the population of peak-ring basins by ∼150% and protobasins by ∼100% over previous catalogs, including 44 newly identified peak-ring basins (total=74) and 17 newly identified protobasins (total=32). A newly defined transitional basin type, the ringed peak-cluster basin (total=9), is also described. The new basin catalog confirms that Mercury has the largest population of peak-ring basins of the terrestrial planets and also places the onset rim-crest diameter for peak-ring basins at , which is intermediate between the onset diameter for peak-ring basins on the Moon and those for the other terrestrial planets. The ratios of ring diameter to rim-crest diameter further emphasize that protobasins and peak-ring basins are parts of a continuum of basin morphologies relating to their processes of formation, in contrast to previous views that these forms are distinct. Comparisons of the predictions of peak-ring basin-formation models with the characteristics of the basin catalog for Mercury suggest that formation and modification of an interior melt cavity and nonlinear scaling of impact melt volume with crater diameter provide important controls on the development of peak rings. The relationship between impact-melt production and peak-ring formation is strengthened further by agreement between power laws fit to ratios of ring diameter to rim-crest diameter for peak-ring basins and protobasins and the power-law relation between the dimension of a melt cavity and the crater diameter. More detailed examination of Mercury's peak-ring basins awaits the planned insertion of the MESSENGER spacecraft into orbit about Mercury in 2011.     

Observations of suprathermal electrons in Mercury's magnetosphere during the three MESSENGER flybys

In 2008 the MESSENGER spacecraft made the first direct observation of Mercury's magnetosphere in the more than 30 years since the Mariner 10 encounters. During MESSENGER's first flyby on 14 January 2008, the interplanetary magnetic field (IMF) was northward immediately prior to and following MESSENGER's equatorial passage through this small magnetosphere. The Energetic Particle Spectrometer (EPS), one of two sensors on the Energetic Particle and Plasma Spectrometer instrument that responds to electrons from ∼35 keV to 1 MeV and ions from ∼35 keV to 2.75 MeV, saw no increases in particle intensity above instrumental background (∼5 particles/cm²/sr/s/keV at 45 keV) at any time during the probe's magnetospheric passage. During MESSENGER's second flyby on 6 October 2008, there was a steady southward IMF, and intense reconnection was observed between the planet's magnetic field and the IMF. However, once again EPS did not observe bursts of energetic particles similar to those reported by Mariner 10 from its March 1974 encounter. On 29 September 2009, MESSENGER flew by Mercury for the third and final time before orbit insertion in March 2011. Although a spacecraft safe-hold event stopped science measurements prior to the outbound portion of the flyby, all instruments recorded full observations until a few minutes before the closest approach. In particular, the MESSENGER Magnetometer documented several substorm-like signatures of extreme loading of Mercury's magnetotail, but again EPS measured no energetic ions or electrons above instrument background during the inbound portion of the flyby. MESSENGER's X-Ray Spectrometer (XRS) nonetheless observed photons resulting from low-energy (∼10 keV) electrons impinging on its detectors during each of the three flybys. We infer that suprathermal plasma electrons below the EPS energy threshold caused the bremsstrahlung seen by XRS. In this paper, we summarize the energetic particle observations made by EPS and XRS during MESSENGER's three Mercury flybys, and we revisit the observations reported by Mariner 10 in the context of these new results.     

Estimating Mercury's 88-day libration amplitude from orbit

In this paper it is derived that the libration of Mercury can be described by where Φ₀ is the unknown libration amplitude, M is Mercury's mean anomaly and K=−9.483. Φ₀ can be determined by comparing pairs of images of the same landmarks taken by an orbiter at different positions of Mercury. If the angle between the orbit plane of a polar orbiter and Mercury's line of periapsis is between −60° and 60° and if one landmark at the equator is imaged per day with a relative precision of , then the libration amplitude can be determined in two Mercury years (176 days) with an accuracy of or better, which is sufficient to answer the question whether Mercury has a solid or fluid core.     

Electron transport and precipitation at Mercury during the MESSENGER flybys: Implications for electron-stimulated desorption

To examine electron transport, energization, and precipitation in Mercury's magnetosphere, a hybrid simulation study has been carried out that follows electron trajectories within the global magnetospheric electric and magnetic field configuration of Mercury. We report analysis for two solar-wind parameter conditions corresponding to the first two MESSENGER Mercury flybys on January 14, 2008, and October 6, 2008, which occurred for similar solar wind speed and density but contrasting interplanetary magnetic field (IMF) directions. During the first flyby the IMF had a northward component, while during the second flyby the IMF was southward. Electron trajectories are traced in the fields of global hybrid simulations for the two flybys. Some solar wind electrons follow complex trajectories at or near where dayside reconnection occurs and enter the magnetosphere at these locations. The entry locations depend on the IMF orientation (north or south). As the electrons move through the entry regions they can be energized as they execute non-adiabatic (demagnetized) motion. Some electrons become magnetically trapped and drift around the planet with energies on the order of 1–10 keV. The highest energy of electrons anywhere in the magnetosphere is about 25 keV, consistent with the absence of high-energy (>35 keV) electrons observed during either MESSENGER flyby. Once within the magnetosphere, a fraction of the electrons precipitates at the planetary surface with fluxes on the order of 10⁹ cm⁻² s⁻¹ and with energies of hundreds of eV. This finding has important implications for the viability of electron-stimulated desorption (ESD) as a mechanism for contributing to the formation of the exosphere and heavy ion cloud around Mercury. From laboratory estimates of ESD ion yields, a calculated ion production rate due to ESD at Mercury is found to be on par with ion sputtering yields.     

Mercury's integral phase curve: Phase reddening and wavelength dependence of photometric quantities

We present results of a five-filter photometric study of Mercury's integral phase curve in the Johnson-Cousins UBVRI system, performed with the 0.90-m Westerlund Telescope in Uppsala, Sweden. CCD observations were made of the integrated disk for the phase angle range 22-152°, and the study is the first to cover the extended visible spectrum of Mercury. The observations are analyzed with Hapke's semi-empirical radiative transfer-based light-scattering model and photometric quantities are derived. A statistically significant phase reddening effect of is determined for Mercury based on color index observations, which is similar to that of the Moon. Phase coefficients fit to integral absolute magnitude data and Hapke models in combination with color index data provide a phase reddening effect of which does however not provide statistically significant evidence for its presence. Phase coefficients indicate that phase reddening may be decreasing in magnitude with wavelength. As for the case with the Moon, the value of the phase integral increases with wavelength, but at an eight times higher rate. This value is consistent with the difference in the rate of change in the spectral slope-emission angle relation for the two bodies. We attribute these differences with Mercury's redder spectral slope and an increase with wavelength of the backscattering lobe amplitude in the double Henyey-Greenstein particle phase function formulation. The normal albedo of integral Mercury at 1064 nm, pertinent to the return pulse energy of the BepiColombo laser altimeter (BELA), is estimated to 0.23±0.06 with a range of 0.13-0.33 for 99% of the surface.     

The structure and time variability of the ring atmosphere and ionosphere

The saturnian system is subject to constant bombardment by interplanetary meteoroids and irradiation by solar UV photons. Both effects release neutral molecules from the icy ring particles either in the form of impact water vapor or gas emission in the form of H₂O, O₂ and H₂. The observations of the Cassini spacecraft during its orbit insertion have shown the existence of molecular and atomic oxygen ions. Subsequent modeling efforts have led to the picture that an exospheric population of neutral oxygen molecules is probably maintained in the vicinity of the rings via photolytic-decomposition of ice and surface reactions. At the same time, ionized products O⁺ and ions move along the magnetic field lines and, depending on the optical local thickness rings, can thread through the ring plane or impact a ring particle, the ion principal sink. In addition, collisional interactions between the ions and neutrals will change the scale height of the ions and produce a scattered component of O₂ molecules and O atoms which can be injected into Saturn’s upper atmosphere or the inner magnetosphere. The ring atmosphere, therefore, serves as a source of ions throughout Saturn’s magnetosphere. If photolysis of ice is the dominant source of O₂, then the complex structure of the ring atmosphere/ionosphere and the injection rate of neutral O₂ will be subject to modulation by the seasonal variation of Saturn along its orbit. In this work, we show how the physical properties of the ring oxygen atmosphere, the scattered component, and the magnetospheric ion source rate vary as the ring system goes through the cycle of solar insolation. In particular, it is shown that the magnetopheric ions should be nearly depleted at Saturn’s equinox if O₂ is produced mainly by photolysis of the ring material.     

Formation of Carbonyl Sulfide (OCS) from Carbon Monoxide and Sulfur Vapor and Applications to Venus

We use gas chromatography to identify and measure the amounts of carbonyl sulfide (OCS) formed in a gas-flow system via the net thermochemical reactionsat temperatures of 470–612°C and ambient atmospheric pressure. The goal of our work is to evaluate the importance of reactions (1) to (3), which have been proposed as potential sources of OCS in Venus' lower atmosphere. Our results show OCS formation by reaction (3), but not by reactions (1) or (2) under our experimental conditions. Based on our results, experimental data from the literature, and theoretical models in the literature, we conclude that (1) the reaction of S₂and CO is an important source of OCS in Venus' lower atmosphere, and (2) probably neither reaction (1) nor reaction (2) is an important source of OCS on Venus. Finally, we use thermodynamic data for reaction (3) and Venera spacecraft observations of CO and sulfur vapor at 0–12-km altitude to calculate an OCS equilibrium abundance of 1–14 ppmv, with a nominal value of 5 ppmv, for reaction (3) near Venus' surface.     

The MESSENGER mission to Mercury: scientific objectives and implementation

Mercury holds answers to several critical questions regarding the formation and evolution of the terrestrial planets. These questions include the origin of Mercury's anomalously high ratio of metal to silicate and its implications for planetary accretion processes, the nature of Mercury's geological evolution and interior cooling history, the mechanism of global magnetic field generation, the state of Mercury's core, and the processes controlling volatile species in Mercury's polar deposits, exosphere, and magnetosphere. The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission has been designed to fly by and orbit Mercury to address all of these key questions. After launch by a Delta 2925H-9.5, two flybys of Venus, and two flybys of Mercury, orbit insertion is accomplished at the third Mercury encounter. The instrument payload includes a dual imaging system for wide and narrow fields-of-view, monochrome and color imaging, and stereo; X-ray and combined gamma-ray and neutron spectrometers for surface chemical mapping; a magnetometer; a laser altimeter; a combined ultraviolet–visible and visible-near-infrared spectrometer to survey both exospheric species and surface mineralogy; and an energetic particle and plasma spectrometer to sample charged species in the magnetosphere. During the flybys of Mercury, regions unexplored by Mariner 10 will be seen for the first time, and new data will be gathered on Mercury's exosphere, magnetosphere, and surface composition. During the orbital phase of the mission, one Earth year in duration, MESSENGER will complete global mapping and the detailed characterization of the exosphere, magnetosphere, surface, and interior.     

Modelling of magnetic field measurements at Mercury

Mapping Mercury's internal magnetic field with a magnetometer in closed orbit around the planet will provide valuable information about its internal structure. By measuring magnetic field multipoles of order higher than the dipole we could, in principle, determine some properties, such as size and location, of the internal source. Here we try to quantify these expectations. Using conceptual models, we simulate the actual measurement during the BepiColombo mission, and then we analyze the simulated data in order to estimate the measurement errors due to the limited spatial sampling. We also investigate our ability to locate the field generating current system within the planet. Finally, we address the main limitation of our model, due to the presence of time-varying external magnetospheric currents.     

Eclipsing binary Trojan asteroid Patroclus: Thermal inertia from Spitzer observations

We present mid-infrared observations of the binary L5-Trojan system (617) Patroclus-Menoetius before, during, and after two shadowing events, using the Infrared Spectrograph (IRS) on board the Spitzer Space Telescope. For the first time, we effectively observe changes in asteroid surface temperature in real time, allowing the thermal inertia to be determined very directly. A new detailed binary thermophysical model is presented which accounts for the system’s known mutual orbit, arbitrary component shapes, and thermal conduction in the presence of eclipses.We obtain two local thermal-inertia values, representative of the respective shadowed areas: and . The average thermal inertia is estimated to be , potentially with significant surface heterogeneity. This first thermal-inertia measurement for a Trojan asteroid indicates a surface covered in fine regolith. Independently, we establish the presence of fine-grained (<a few μm) silicates on the surface, based on emissivity features near 10 and similar to those previously found on other Trojans.We also report V-band observations and report a lightcurve with complete rotational coverage. The lightcurve has a low amplitude of peak-to-peak, implying a roughly spherical shape for both components, and is single-periodic with a period equal to the period of the mutual orbit, indicating that the system is fully synchronized.The diameters of Patroclus and Menoetius are 106±11 and , respectively, in agreement with previous findings. Taken together with the system’s known total mass, this implies a bulk mass density of , significantly below the mass density of L4-Trojan asteroid (624) Hektor and suggesting a bulk composition dominated by water ice.All known physical properties of Patroclus, arguably the best studied Trojan asteroid, are consistent with those expected in icy objects with devolatilized surface (extinct comets), consistent with what might be implied by recent dynamical modeling in the framework of the Nice Model.     

Radius and limb topography of Mercury obtained from images acquired during the MESSENGER flybys

Analysis of images obtained by the MESSENGER spacecraft during its three flybys of Mercury yields a new estimate for the planet's mean radius of 2439.25±0.69 km, in agreement with results from Mariner 10 and Earth-based observations, as well as with MESSENGER altimeter and occultation data. The mean equatorial radius and polar radius are identical to within error, suggesting that rotational oblateness is negligible when compared with other sources of topography. This result is consistent with the small gravitational oblateness of the planet. Minor differences in radius obtained at different locations reflect regional variations in topography. Residual topography along three limb profiles has a dynamic range of 7.4 km and a root-mean-square roughness of 0.8 km over hemispherical scales. Following MESSENGER's entry into orbit about Mercury in March 2011, we expect considerable additional improvements to our knowledge of Mercury's size and shape.     

Physical Properties of the Hermean Surface (A Review)

Two new missions to Mercury are planned in the next few years (according to the NASA Messenger project in 2004 and the ESA BepiColomboproject in 2009). Many aspects of the study of Mercury concerning the origin of the planet, its interior structure, the formation and composition of the regolith, the surface cratering processes, the magnetosphere, the very tenuous atmosphere (exosphere) of Mercury, the orbital and rotational dynamics, and the thermal history of the planet's surface and interior are intensely developing at present. The presence of rocks on Mercury's surface, such as anorthosites (consisting mainly of calcium plagioclase) and feldspars, was reliably established in the course of such investigations. There are obvious signatures of old lava outflows and the heterogeneous composition of the crust depleted in FeO (less than 3%) and enriched with feldspar, with the possible presence of low-iron pyroxenes and alkali basalts. The sole spectral feature in the near infrared, observed at some longitudes, is a possible pyroxene absorption band at 0.95 m, which can be used to investigate the abundance and distribution of FeO in the regolith. Mercury represents a geologically intriguing planetary object. Its exosphere contains Na and K, the origin of which is undoubtedly related to the nature of Mercury's surface. The physical properties of Mercury's regolith, its structure, the grain sizes, the refractive index, and even the characteristic sizes of block material, lend themselves, in principle, to investigation by remote sensing methods. It is possible that deposits of buried water ice and/or elemental sulfur are present in the polar regions of the planet. The results of the study of the structure, physical properties, and composition of Mercury's regolith can be used to single out fundamental features in the origin of Mercury's surface. Thermal infrared spectra are also indicative of the presence of feldspars, pyroxenes, and igneous nepheline-bearing alkali syenites. The wavelengths of the thermal emissivity maxima indicate intermediate or slightly mafic rocks with a pronounced heterogeneous composition. The iron absorption bands give evidence for the presence of FeO in the Hermean crust and mantle. To some extent, the physical properties of the crustal layers may be associated with the odd magnetic field of the planet. The resulting Hermean magnetic field may be produced, at least partly, by randomly oriented paleomagnetic fields of individual large magnetized blocks of the planet's crust.     

On the population, physical decay and orbital distribution of Jupiter family comets: Numerical simulations

We study the Jupiter family comet (JFC) population assumed to come from the Scattered Disk and transferred to the Jupiter’s zone through gravitational interactions with the Jovian planets. We shall define as JFCs those with orbital periods and Tisserand parameters in the range 2<T?3.1, while those comets coming from the same source, but that do not fulfill the previous criteria (mainly because they have periods ) will be called ‘non-JFCs’. We performed a series of numerical simulations of fictitious comets with a purely dynamical model and also with a more complete dynamical-physical model that includes besides nongravitational forces, sublimation and splitting mechanisms. With the dynamical model, we obtain a poor match between the computed distributions of orbital elements and the observed ones. However with the inclusion of physical effects in the complete model we are able to obtain good fits to observations. The best fits are attained with four splitting models with a relative weak dependence on q, and a mass loss in every splitting event that is less when the frequency is high and vice versa. The mean lifetime of JFCs with radii and is found to be of about 150-200 revolutions (∼. The total population of JFCs with radii within Jupiter’s zone is found to be of 450±50. Yet, the population of non-JFCs with radii in Jupiter-crossing orbits may be ∼4 times greater, thus leading to a whole population of JFCs + non-JFCs of ∼2250±250. Most of these comets have perihelia close to Jupiter’s orbit. On the other hand, very few non-JFCs reach the Earth’s vicinity (perihelion distances ) which gives additional support to the idea that JFCs and Halley-type comets have different dynamical origins. Our model allows us to define the zones of the orbital element space in which we would expect to find a large number of JFCs. This is the first time, to our knowledge, that a physico-dynamical model is presented that includes sublimation and different splitting laws. Our work helps to understand the role played by these erosion effects in the distribution of the orbital elements and lifetimes of JFCs.     

The dayside magnetospheric boundary layer at Mercury

Magnetic field and plasma data from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft on the outbound portions of the first (M1) and second (M2) flybys of Mercury reveal a region of depressed magnetic field magnitude and enhanced proton fluxes adjacent to but within the magnetopause, which we denote as a dayside boundary layer. The layer was present during both encounters despite the contrasting dayside magnetic reconnection, which was minimal during M1 and strong during M2. The overall width of the layer is estimated to be between 1000 and 1400 km, spanning most of the distance from the dayside planetary surface to the magnetopause in the mid-morning. During both flybys the magnetic pressure decrease was ∼1.6 nPa, and the width of the inner edge was comparable to proton gyro-kinetic scales. The maximum variance in the magnetic field across the inner edge was aligned with the magnetic field vector, and the magnetic field direction did not change markedly, indicating that the change in field intensity was consistent with an outward plasma-pressure gradient perpendicular to the magnetic field. Proton pressures in the layer inferred from reduced distribution observations were 0.4 nPa during M1 and 1.0 nPa during M2, indicating either that the proton pressure estimates are low or that heavy ions contribute substantially to the boundary-layer plasma pressure. If the layer is formed by protons drifting westward from the cusp, there should be a strong morning–afternoon asymmetry that is independent of the interplanetary magnetic field (IMF) direction. Conversely, if heavy ions play a major role, the layer should be strong in the morning (afternoon) for northward (southward) IMF. Future MESSENGER observations from orbit about Mercury should distinguish between these two possibilities.