The stratigraphic age of australites revisited

Abstract— The proposed stratigraphic age of 5000–15,000 years for australites found in the vicinity of Port Campbell, Victoria, is demonstrably incorrect. These tektites are not in situ and are also found in an older horizon than previously reported. A minimum stratigraphic age of 250,000 years is calculated from the cosmic-ray-produced ³He in alluvial diamonds from a horizon that also contains australites near Lake Argyle, Western Australia. There is no reason to believe that a true, rather than a minimum, stratigraphic age for Lake Argyle tektites would not match the many radiometric ages reported in the literature.     

Ablated tektite from the central Indian Ocean

Abstract A well-preserved ablated (button-shaped) tektite recovered from the surface sediments of the central Indian Ocean lacks flow ridges and has apparently undergone ablation of 6.9 to 7.9 mm. The lack of flow ridges and amount of ablation indicate that, if it originated in Southeast Asia, it must have had a very shallow trajectory (only a few degrees) and a velocity on the order of 7 km/s as it re-entered the atmosphere. The central Indian Ocean tektite is compositionally similar to high-magnesium (HMg) australites found at Serpentine Lakes and Lake Wilson, Australia, and to some HMg microtektites found in deep-sea sediments from the central Indian Ocean. This discovery supports a previous conclusion that the Australasian tektite strewn field covers most of the Indian Ocean.     

Bottle‐green microtektites from the South Tasman Rise: Deep‐sea evidence for an impact event near the Miocene/Pliocene boundary

Abstract— Forty‐eight bottle‐green microtektites (BGMTs) were found in a core sample recovered from Ocean Drilling Program Site 1169, located along the western flank of the South Tasman Rise in the southeastern Indian Ocean. Biostratigraphic evidence loosely constrains the age of the Site 1169 BGMTs to an interval spanning the late‐middle Miocene to earliest Pliocene (12.1–4.6 Ma); incomplete core recovery and a major stratigraphic hiatus prevented a more precise age determination. This broad range of biostratigraphic ages indicates that these microtektites predate the Australasian strewn layer by at least 3.83 Ma, and perhaps by as much as 11.33 Ma. Furthermore, the REE signatures of the Site 1169 BGMTs are incongruent with those of typical Australasian ejecta, indicating that the Site 1169 BGMTs are not part of the larger Australasian strewn field. Among the various australite subgroups, the Site 1169 BGMTs are most similar in age to the HNa/K australites. However, numerous compositional discrepancies indicate that these two ejecta populations are also unrelated; the great distances separating Site 1169 from HNa/K australite‐bearing localities also makes a shared provenance unlikely. Therefore, we conclude that the Site 1169 BGMTs were formed by a late Miocene impact that is distinctly separate from the Australasian and HNa/K australite events, though the location of this impact is unknown.     

Australasian microtektites and associated impact ejecta in the South China Sea and the Middle Pleistocene supereruption of Toba

Abstract— Australasian microtektites were discovered in Ocean Drilling Program (ODP) Hole 1143A in the central part of the South China Sea. Unmelted ejecta were found associated with the microtektites at this site and with Australasian microtektites in Core SO95–17957–2 and ODP Hole 1144A from the central and northern part of the South China Sea, respectively. A few opaque, irregular, rounded, partly melted particles containing highly fractured mineral inclusions (generally quartz and some K feldspar) and some partially melted mineral grains, in a glassy matrix were also found in the microtektite layer. The unmelted ejecta at all three sites include abundant white, opaque grains consisting of mixtures of quartz, coesite, and stishovite, and abundant rock fragments which also contain coesite and, rarely, stishovite. This is the first time that shock‐metamorphosed rock fragments have been found in the Australasian microtektite layer. The rock fragments have major and trace element contents similar to the Australasian microtektites and tektites, except for higher volatile element contents. Assuming that the Australasian tektites and microtektites were formed from the same target material as the rock fragments, the parent material for the Australasian tektites and microtektites appears to have been a fine‐grained sedimentary deposit. Hole 1144A has the highest abundance of microtektites (number/cm²) of any known Australasian microtektite‐bearing site and may be closer to the source crater than any previously identified Australasian microtektite‐bearing site. A source crater in the vicinity of 22° N and 104° E seems to explain geographic variations in abundance of both the microtektites and the unmelted ejecta the best; however, a region extending NW into southern China and SE into the Gulf of Tonkin explains the geographic variation in abundance of microtektites and unmelted ejecta almost as well. The size of the source crater is estimated to be 43 ± 9 km based on estimated thickness of the ejecta layer at each site and distance from the proposed source. A volcanic ash layer occurs just above the Australasian microtektite layer, which some authors suggest is from a supereruption of the Toba caldera complex. We estimate that deposition of the ash occurred ?800 ka ago and that it is spread over an area of at least 3.7 times 10⁷ km².     

Potassium isotope abundances in Australasian tektites and microtektites

Abstract— We report electron microprobe determinations of the elemental compositions of 11 Australasian layered tektites and 28 Australasian microtektites; and ion microprobe determinations of the ⁴¹K/³⁹K ratios of all 11 tektites and 13 of the microtektites. The elemental compositions agree well with literature values, although the average potassium concentrations measured here for microtektites, 1.1‐1.6 wt%, are lower than published average values, 1.9‐2.9 wt%. The potassium isotope abundances of the Australasian layered tektites vary little. The average value of ^δ41K, 0.02 ± 0.12%₀ (1 s? mean), is indistinguishable from the terrestrial value (= 0 by definition) as represented by our standard, thereby confirming four earlier tektite analyses of Humayun and Koeberl (2004). In agreement with those authors, we conclude that evaporation has significantly altered neither the isotopic nor the elemental composition of Australasian layered tektites for elements less volatile than potassium. Although the average ⁴¹K/³⁹K ratio of the microtektites, 1.1 ± 1.7%₀ (1 s? mean), is also statistically indistinguishable from the value for the standard, the individual ratios vary over a very large range, from ?10.6 ± 1.4%₀ to +13.8 ± 1.5%₀ and at least three of them are significantly different from zero. We interpret these larger variations in terms of the evaporation of isotopically light potassium; condensation of potassium in the vapor plume; partial or complete stirring and quenching of the melts; and the possible uptake of potassium from seawater. That the average ⁴¹K/³⁹K ratio of the microtektites equals the terrestrial value suggests that the microtektite‐forming system was compositionally closed with respect to potassium and less volatile elements. The possibility remains open that ⁴¹K/³⁹K ratios of microtektites vary systematically with location in the strewn field.     

Ocean Drilling Project Hole 689B spherules and upper Eocene microtektite and clinopyroxene-bearing spherule strewn fields

Abstract— Montanari et al. (1993) reported a positive Ir anomaly in the upper Eocene sediments from Ocean Drilling Program Hole 689B on the Maud Rise, Southern Ocean. Vonhof (1998) described microtektites and clinopyroxene-bearing (cpx) spherules associated with the Ir anomaly in Hole 689B and suggested that they belong to the North American and equatorial Pacific cpx strewn fields, respectively. We searched a suite of 27 samples taken through the spherule layer from Hole 689B, and we recovered 386 microtektites and 667 cpx spherules. We studied the petrography of the microtektites and cpx spherules and determined the major element compositions of 31 microtektites and 14 cpx spherules using energy dispersive x-ray analysis. We also determined the minor element compositions of eight microtektites using instrumental neutron activation analysis. We found that the peak abundance of cpx spherules is ～2 cm below the peak abundance of the microtektites (～128.7 m below sea floor), which suggests that the cpx spherule layer may be slightly older (～3–5 ka). The microtektites are mostly spherical and are generally transparent and colorless. They are similar to the North American microtektites in composition, the biggest differences being their generally lower Na₂O and generally higher Zr, Ba, and Ir (up to 0.3 ppb) contents. We agree with Vonhof (1998) that the Hole 689B microtektites probably belong to the North American tektite strewn field. We calculate that the number of microtektites (>125 μm)/cm² at Hole 689B is 52. This number is close to the concentration predicted by extrapolation of the trend of concentration vs. distance from the Chesapeake Bay structure, based on data from other North American microtektite-bearing sites. Thus, the North American strewn field may be at least four times larger than previously mapped. The Hole 689B cpx spherules range from translucent yellow to opaque black, but most are opaque tan to dark brown. They are generally spherical in shape and all are < 125 μm in diameter. Some contain Ni-rich spinels in addition to clinopyroxene microlites. The cpx spherules are petrographically and compositionally similar to cpx spherules previously found in the northwestern Atlantic Ocean, Caribbean Sea, Gulf of Mexico, equatorial Pacific, and eastern Indian Ocean. The abundance and widespread geographic occurrence of these spherules suggest that the strewn field may be global in geographic extent. Assuming a global extent, we estimate that there may be at least 25 billion metric tons of cpx spherules in the strewn field. Based on age, size, and geographic location, we speculate that the 100 km diameter Popigai crater in northern Siberia may be the source of the cpx spherule layer.     

Fragmentation and hydration of tektites and microtektites

Abstract— An examination of data collected over the last 30 years indicates that the percent of glass fragments vs. whole splash forms in the Cenozoic microtektite strewn fields increases towards the source crater (or source region). We propose that this is due to thermal stress produced when tektites and larger microtektites fall into water near the source crater while still relatively hot (>1150 °C). We also find evidence (low major oxide totals, frothing when melted) for hydration of most of the North American tektite fragments and microtektites found in marine sediments. High-temperature mass spectrometry indicates that these tektite fragments and microtektites contain up to 3.8 wt% H₂O. The H₂O-release behavior during the high-temperature mass-spectrometric analysis, plus high CI abundances (0.05 wt%), indicate that the North American tektite fragments and microtektites were hydrated in the marine environment (i.e., the H₂O was not trapped solely on quenching from a melt). The younger Ivory Coast and Australasian microtektites do not exhibit much evidence of hydration (at least not in excess of 0.5 wt% H₂O); this suggests that the degree of hydration increases with age. In addition, we find that some glass spherules (with <65 wt% SiO₂) from the upper Eocene clinopyroxene-bearing spherule layer in the Indian Ocean have palagonitized rims. These spherules appear to have been altered in a similar fashion to the splash form K/T boundary spherules. Thus, our data indicate that tektites and microtektites that generally contain >65 wt% SiO₂ can undergo simple hydration in the marine environment, while impact glasses (with <65 wt% SiO₂) can also undergo palagonitization.     

Australasian microtektites from Antarctica: XAS determination of the Fe oxidation state

The Fe oxidation state and coordination number of 29 impact glass spherules recently recovered from the Transantarctic Mountains (Antarctica) have been determined by X‐ray absorption near edge structure (XANES) spectroscopy. Based on geochemical, isotopic, and fission track data, these spherules are considered as microtektites from the Australasian tektite/microtektite strewn field. Their find location is the farthest so far discovered from the possible source crater region, and their alkali content is the lowest compared with other published data on Australasian microtektite glasses. The Fe³⁺/(Fe²⁺+Fe³⁺) ratio, determined from the analysis of the pre‐edge peak energy position and integrated intensity, is below 0.1 (±0.04) for all the samples, and is comparable to that of most tektites and microtektites from the Australasian strewn field. Also, the pre‐edge peak integrated intensity, which is sensitive to the average Fe coordination geometry, is comparable to that of other Australasian microtektites reported in the literature. The agreement of the Fe oxidation state and coordination number, between the Transantarctic Mountain microtektites (TAM) and the Australasian tektites and microtektites, further confirms the impact origin of these glass spherules and provides an independent suggestion that they represent a major extension southeastward of the Australasian strewn field. The fact that similar redox conditions are observed in tektites and microtektites within the Australasian strewn field regardless of the distance from the source crater area (up to approximately 11000 km) could be an important constraint for better understanding the different processes affecting microtektite formation and transport. The fact that the Fe oxidation state of microtektites does not increase with distance, as in the case of North American microtektites, means that thermal and redox histories of Australasian and TAM microtektites could differ significantly from those of North American microtektites.     

Sr and Nd analyses of upper Eocene spherules and their implications for target rocks

Abstract— Upper Eocene impact ejecta has been discovered all over the world. The number of upper Eocene impact layers and the geographic distribution of each layer, based on major chemical composition and biostratigraphic data, are not agreed upon. We have performed four Sr‐Nd isotopic analyses of clinopyroxene‐bearing spherules (cpx spherules) and three Sr‐Nd analyses of microtektites from five Deep Sea Drilling Project/Ocean Drilling Program (DSDP/ODP) sites in the South Atlantic and Indian Oceans. Our data support the hypothesis that there is only one cpx spherule layer in upper Eocene sediments. We also find that the microtektites associated with the cpx spherule layer in the South Atlantic and Indian Oceans are not part of the North American tektite strewn field, but belong to the same event that produced the cpx spherules. The microtektites, together with cpx spherules, are more heterogeneous than microtektites/tektites from other strewn fields. No direct link has been established between the microtektites from this study and possible target rock at the Popigai crater.     

Impact microcrater morphology on Australasian microtektites

Abstract— Scanning electron microscopy of 137 Australasian microtektites and fragments from 4 sediment cores in the Central Indian Ocean reveals more than 2000 impact‐generated features in the size range of 0.3 to 600 μm. Three distinct impact types are recognized: destructive, erosive, and accretionery. A large variation in impact energy is seen in terms of catastrophic destruction demonstrated by fragmented microtektites through erosive impacts comprising glass‐lined pit craters, stylus pit craters, pitless craters, and a small number of accretionery features as well. The size range of observed microtektites is from 180 to 2320 μm, and not only are the smaller microtektites seen to have the largest number of impacts, but most of these impacts are also of the erosive category, indicating that target temperature is an important factor for retaining impact‐generated features. Further, microcratering due to collisions in impact‐generated plumes seems to exist on a larger and more violent scale than previously known. Although the microcraters are produced in a terrestrially generated impact plume, they resemble lunar microcraters in many ways: 1) the size range of impacts and crater morphology variation with increasing size; 2) dominant crater number densities in μm and sub‐μm sizes. Therefore, tektite‐producing impacts can lead to the generation of microcraters that mimic those found on lunar surface materials, and for the lunar rocks to qualify as reliable cosmic dust flux detectors, their tumbling histories and lunar surface orientations have to be known precisely.     

Stratigraphic relations of australites in the Port Campbell Embayment,Victoria

Abstract— In the Port Campbell Embayment of Victoria, australites have been found in situ in channel deposits of the Hanson Plain Sand of Pliocene and Pleistocene age. The large majority of the australites, however, occur as a lag deposit at the basal contact of the Sturgess Sand of late Pleistocene and Holocene age and are spatially correlated with ferruginous sandstone clasts that are derived from the Hanson Plain Sand. Some of the tektites are imbedded in or bonded to the ferruginous sandstone clasts, but most are found as individual tektite fragments. A few percent of the tektites have nearly perfectly preserved, complete aerodynamically shaped forms. The sandstone clasts and associated tektites have been reworked from the much older underlying Hanson Plain and have been locally concentrated in the lag deposit. Some tektites also occur at higher levels in the Sturgess Sand, almost invariably in association with stone flakes, exotic stones transported by the aborigines and, locally, with middens of mollusc shells. Circumstantial evidence indicates that the aborigines transported the tektites found in the upper part of the Sturgess, particularly at Stanhope Bay. As Port Campbell australites unequivocally occur in strata much older than the late Pleistocene and Holocene Sturgess, there is no longer any conflict between the apparent stratigraphic age of the tektites and the middle Pleistocene ages obtained by various chronometric methods.     

Two layers of Australasian impact ejecta in the Indian Ocean?

Abstract— Only 2 Australasian tektites have been found in the Indian Ocean, and both are associated with surficial sediments. We collected cores from both locations where the tektites have been reported. The microtektites in these cores (and both the tektites, as reported earlier) have chemical compositions within the compositional range previously reported for Australasian tektites and microtektites. In both locations, while the tektites are occurring at the sediment/water interface, the microtektites are found buried in older horizons beneath the seafloor at stratigraphic levels, conforming to the radiometric age of the strewn field. Thus, at first glance, there appear to be 2 layers of Australasian impact ejecta in the Indian Ocean. However, the manganese nodules are associated with the tektites which, although millions of years old, are invariably resting on recent sediments. Therefore, the mechanism that retains nodules at the seafloor also seems to be operative on the tektites, thus leading to this apparent “age paradox” of tektite/microtektite distribution in the Indian Ocean, although they both belong to the same impact event.     

Stability of mid-latitude snowpacks on Mars

Christensen [2003. Nature 422, 45-48] suggested that runoff from melting snowpacks on martian slopes might be responsible for carving gullies. He also suggested that snowpacks currently exist on Mars, for example on the walls of Dao Valles (approximately 33° S). Such snowpacks were presumably formed during the last obliquity cycle, which occurred about 70,000 years ago. In this paper we investigate a specific scenario under conditions we believe are favorable for snowpack melting. We model the rate at which a snowpack located at 33° S on a poleward-facing slope sublimates and melts on Mars, as well as the temperature profile within the snowpack. Our model includes the energy and mass balance of a snowpack experiencing diurnal variations in insolation. Our results indicate that a dirty snowpack would quickly sublimate and melt under current martian climate conditions. For example a 1 m thick dusty snowpack of moderate density (550 kg/m³) and albedo (0.39) would sublimate in less than two seasons, producing a small amount of meltwater runoff. Similarly, a cleaner snowpack (albedo 0.53) would disappear in less than 9 seasons. These results suggest that the putative snowpack almost certainly could not have survived for 70,000 years. For most of the parameter settings snowpack interior temperatures at this latitude and slope do reach the melting point. Under most conditions melting occurs when the snowpack is less than 10 cm thick. The modeled snowpack will not melt if it is covered by a 1 cm dust lag. In general, these findings raise interesting possibilities regarding gully formation, but perhaps mostly during a past climate regime when snowfall was expected to have occurred. If there currently are exposed snowpacks on martian mid-latitude slopes, then these ice sheets cannot last long. Hence they might be time variable features on Mars and should be searched for.     

Australasian minitektites discovered in the Indian Ocean

Abstract— Large area sampling with a box core in the Indian Ocean has led to the discovery of minitektites (>1–3.75 mm long) and a tektite fragment (～1.25 mm) occurring with microtektites belonging to the Australasian tektite strewn field. Minitektites and the microtektites are found to have similar major element compositions conforming to the Australasian tektite/microtektite chemistry. Earlier studies based on isotopic evidence, dating, and chemistry had provided evidence of a single large tektite strewn field; however, the physical association of tektites occurring with microtektites has been lacking. The present study provides such an association.     

Nd and Sr isotopic evidence for the origin of tektite material from DSDP site 612 off the New Jersey coast

Abstract— Late Eocene tektite material from DSDP site 612 is composed of angular to spherical tektites and microtektites containing abundant vesicles and a few unmelted to partially melted mineral inclusions. The major element compositions of the 612-tektites are generally comparable to those of North American tektites, but the physical features suggest that the DSDP-612 tektites were formed by less severe shock melting. The ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd compositions of 612-tektites: a) show much wider ranges than the tightly constrained group of North American tektites and microtektites, and b) are significantly different from those of other groups of tektites. The existence of large isotopic variations in tektites from DSDP site 612 requires that they were formed from a chemically and isotopically heterogeneous material in a regime that is distinctive from that of other groups of tektites. T^ND_CHUR and T^Sr_UR model ages of the 612-tektites indicate that they were formed from a crustal source of late Precambrian mean age (800–1000 Ma) which in middle Palaeozoic time (?400 Ma) was further enriched in Rb/Sr during sedimentary processes. These source characteristics suggest that the impact which produced the 612-tektites occurred in rocks of the Appalachian orogeny or sediments derived from this orogenic belt. Potential source materials for both 612-tektites and North American tektites are present on the eastern and southeastern part of the North American continent and its adjacent shelf. The distinct isotopic differences between 612-tektites and North American tektites indicate that the two groups of tektites were either formed by the impact of more than one bolide in the same general area, or by a single impact event that sampled different layers.     

Late Eocene microkrystites and microtektites at Maud Rise (Ocean Drilling Project Hole 689B; Southern Ocean) suggest a global extension of the approximately 35.5 Ma Pacific impact ejecta strewn field

Abstract— Late Eocene microtektites and microkrystites recovered from Ocean Drilling Project Hole 689B at Maud Rise (Southern Ocean) are stratigraphically and geochemically compared to spherules from the North American and Pacific strewn fields, and to devitrified spherules from the Eocene-Oligocene global stratotype section and point section in Massignano, Italy. The ODP 689B microkrystites compare well to the Pacific strewn field microkrystites, which suggests that the geographic extent of the Pacific strewn field was much larger than previously documented. The elemental composition of microtektites of ODP Hole 689B is comparable to tektites of the North American strewn field. Their ⁸⁷Sr/⁸⁶Sr ratio, however, is different. We tentatively interpret this to reflect geochemical heterogeneity within the North American strewn field but can not exclude the option that the chemical discrepancies result from the existence of a third late Eocene impact site.     

Changes in abundance and nature of microimpact craters on the surfaces of Australasian microtektites with distance from the proposed source crater location

Abstract– Over 4600 Australasian microtektites from 11 sediment cores along an N–S transect in the Central Indian Ocean have been investigated optically for microimpact features on their surfaces. Detailed scanning electron microscope examination of 68 microtektites along this transect shows 4091 such features. These samples are located between approximate distances of 3900–5000 km from the suggested impact site in Indochina and therefore constitute distal ejecta. The morphology of the microimpacts seems to show distinct variations with distance from the source crater. The total number of microcraters on each microtektite decreases drastically from North to South indicating systematic decrease in the spatial density of the ejecta, and decrease in collisional activity between microtektites with distance from the proposed source crater location. Closer to the proposed source crater location, the microcraters are predominantly small (few μm), pit bearing with radial and concentric cracks, suggestive of violent interparticle collisions. The scenario is reverse farther from the source crater with smaller numbers of impacted microtektites due to increased dispersion of the ejecta and the microcraters are large and shallow, implying gentle collisions with larger particles. These observations provide systematic ground truth for the processes that take place as the ejecta of a large oblique impact which generated the Australasian tektite strewn field is emplaced. The microimpacts appear to take place during the descent of the ejecta and their intensity and number density decrease as a function of the spatial density of the ejecta at any given place and with distance from the source region. These features could help understand processes that take place during ejecta emplacement on planets with substantial atmosphere such as Mars and Venus.     

Evidence of recent changes in the local Galactic IMF of stars and substars

This paper calculates the stellar–substellar initial mass function (IMF) based on data from low-luminosity stars and substars. We find the mass spectrum for the stars and substars less than 10 million years in age, and we estimate the low-mass part of the stellar–substellar IMF for 10 million years ago.     

New occurrences of Australasian microtektites in the Central Indian Basin

Abstract— Thirty-three microtektites have been recovered from four different sites in the Central Indian Basin. Based on their physical properties, geographical occurrence and chemical composition, they are identified as belonging to the Australasian tektite strewn field. Microtektites from three of the sites under study are from surficial samples implying bioturbation and/or erosion or non-deposition.     

Withrow — a New Iron Meteorite from the State of Washington

Abstract. About 1950 an iron meteorite weighing 19 1/4 pounds was found a mile west of Withrow in Douglas County, Washington. The discovery site happens to be a little less than 5 miles SSE from that of the Waterville meteorite. However, the two irons are definitely not from a single fall. Withrow is a medium octahedrite showing secondary recrystallization of the type ascribed to cosmic heating. It was apparently picked up not more than a few years after it fell. Weathering is minimal, and effects of passage through the atmosphere are well preserved.