Estimation of Residual Undrained Shear Strength from Gravity Corer Penetration Data

Residual undrained shear strength, s_{u_res}, is an important parameter for analyzing the response of structures buried within potentially unstable soil mass. A framework for estimating s_{u_res} of fine grained sediments from gravity corer penetration has been developed considering viscous drag during free fall of the corer through seawater and cohesive energy loss during sediment penetration. The procedure was used to estimate s_{u_res} using data from a submarine geotechnical investigation in western Canada. Comparison of the results with alternative estimates of s_{u_res} from miniature torvane tests on the gravity core samples and CPTs performed nearby reveals a reasonable agreement.     

Field Evaluation of Undrained Shear Strength from Piezocone Penetration Tests in Soft Marine Clay

The use of the piezocone penetration test (CPTU) in a geotechnical site investigation offers direct field measurement on stratigraphy and soil behavior. Compared with some traditional investigation methods, such as drilling, sampling and field inspecting method or laboratory test procedures, CPTU can greatly accelerate the field work and hereby reduce corresponding operation cost. The undrained shear strength is a key parameter in estimation of the stability of natural slopes and deformation of embankments in soft clays. This paper provides the measurements of in situ CPTU, field vane testing and laboratory undrained triaxial testing of Lianyungang marine clay in Jiangsu province of China. Based on the literature review of previous interpretation methods, this paper presents a comparison of field vane testing measurements to CPTU interpretation results. The undrained shear strength values from both the field vane tests and cone penetration resistances are lowest at the mid-depths of the marine clay layers, and the excess pore water pressures are highest at the mid-depths of the marine clay layers, indicating that the marine clay layer is underconsolidated.     

Nonparametric Estimation of Undrained Shear Strength for Normally Consolidated Clays

For decades, various well-known empirical correlations have been established and commonly used to estimate the undrained shear strength of normally consolidated clays in geotechnical practice. However, there are still many contradictory cases regarding the validity of these correlations, so their applicability and reliability are questionable. In this study, an extensive geotechnical database for normally consolidated clays has been compiled. Next, a Bayesian nonparametric method is exploited to identify the most critical soil index properties in inferring the undrained shear strength and a new predictive model is proposed. Finally, the performance of the proposed predictive model is assessed and compared with two well-known correlations using an independent testing database. It confirms that the proposed model not only possesses high predictability, but also provides superior performance over other existing empirical correlations.     

Undrained Shear Strength from Field Vane Test on Busan Clay

An unusually thick and soft clay, which is called Busan clay, has been deposited throughout the Nakdong River estuary, South Korea. Although many reclamation works have been carried out in the area since early 1990s, large- and small-scale slope failures have taken place mostly during the soil placement on the clay. A case history briefly describes failure of a breakwater resulting from overestimation of the undrained strength, obtained from laboratory testing. An attempt has been made to examine the methods for determining the undrained strength from field vane testing. For this, the undrained strengths from field vane testing were obtained using different correction factors and compared with each other at five sites in the area. An alternative correction method applicable especially for Busan clay was found, using a range of corrected strength ratios. Further, relationships between the depositional environment and the undrained strength of the clay have also been investigated.     

Undrained Shear Strength from Field Vane Test on Busan Clay

An unusually thick and soft clay, which is called Busan clay, has been deposited throughout the Nakdong River estuary, South Korea. Although many reclamation works have been carried out in the area since early 1990s, large- and small-scale slope failures have taken place mostly during the soil placement on the clay. A case history briefly describes failure of a breakwater resulting from overestimation of the undrained strength, obtained from laboratory testing. An attempt has been made to examine the methods for determining the undrained strength from field vane testing. For this, the undrained strengths from field vane testing were obtained using different correction factors and compared with each other at five sites in the area. An alternative correction method applicable especially for Busan clay was found, using a range of corrected strength ratios. Further, relationships between the depositional environment and the undrained strength of the clay have also been investigated.     

Vertical Variability of the Undrained Shear Strength of Golden Horn Clay

In this study, a stochastic method was applied to investigate if there exists a statistical correlation between values of undrained shear strength at various vertical distances along Golden Horn. Therefore, the undrained shear strength values measured by field vane shear tests at different depths were used to determine the depth dependent variation of the mean value and standard deviation. Futhermore, autocorrelation functions were defined to describe the correlation between values of c_u at different depths. The study showed that the applied method might provide a statistical range to estimate the undrained shear strength value at depths where no measurements are undertaken.     

Evaluation of Undrained Shear Strength and Consolidation Characteristics of Disturbed Marine Sedimentary Clay due to SCP Installation

The behaviors of the marine sedimentary ground improved by sand compaction pile (SCP) method are analyzed. To do this, the results of upheaval characteristics of the sea floor, undrained shear strength, and horizontal consolidation coefficient (consolidation) are investigated. Due to SCP installation on ground, as thickness of a soft clay layer increases, upheaval height increases and upheaval angle decreases. Undrained shear strength of disturbed ground due to SCP construction decreases in early stage after completion of construction, but it shows a trend of recovering as months elapse. As the result of piezocone penetration dissipation tests, consolidation delay phenomenon by the disturbance due to SCP installation clearly is identified and its degree is dependent on the replacement area ratio of SCP and the location of ground.     

Determination of In Situ Sediment Shear Strength from Advanced Piston Corer Pullout Forces

Abstract

The advanced piston cover (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.     

Study of the Shear Strength of Sediments in Main Sedimentation Stages

The shear strength properties of sediments are relevant to many practical problems, including those related to predicting the bearing capacity of the man-made crust lying over dredged disposal sites and those associated with estimating the erosion resistance and the bearing capacity of sediments. In this study, an experimental apparatus and method is developed for sedimentation. This apparatus consists of a settling column, pore measurement apparatus, shear vane apparatus, and multilayer extraction sampling apparatus. The change regulation of interface height, density, excess pore pressure, peak undrained shear strength, residual undrained shear strength, and sensitivity varies before and after the excess pore pressure dissipates to zero in the self-weight consolidation stage. The higher the water content, the greater the particle segregation degree. Particles are mainly segregated in the settling stage, and they are not segregated further in the self-weight consolidation stage. Before excess pore pressure dissipates to zero in the self-weight consolidation stage, shear strength is related to water content, effective stress, and the formed structure of sediments. After excess pore pressure dissipates to zero, peak undrained shear strength is mainly associated with the structure (thixotropy) of sediments. Residual undrained shear strength increases because of the slight decrease in water content. The mechanisms of thixotropy can be expressed as the increase in the original and curing cohesions of sediments with time as determined from microscopic aspects.     

Estimation of undrained shear strength for saturated clay using shear wave velocity

Undrained shear strength is a fundamental parameter for estimating the stability of soft soils. This study explores the relationship between undrained shear strength, void ratio, and shear wave velocity for saturated and normally consolidated clay specimens. The undrained shear strength void ratio-shear wave velocity relationship was correlated to empirically determined parameters of selected marine clay specimens. To verify the proposed relationship between undrained shear strength and shear wave velocity, in situ flat dilatometer tests were used for determining the undrained shear strength, and downhole tests were used to assess the shear wave velocity on a natural soil deposit at various depths. The undrained shear strength estimated from the in situ shear wave velocities was compared to the undrained shear strength obtained in the field. The results show that the inferred undrained shear strength yield similar values and follow the same trends as the in situ undrained shear strength data. This method using shear wave velocity can help to nondestructively estimate the undrained shear strength of soft soils in the field and be used in both on-shore and off-shore geotechnical engineering projects.     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.