Stability studies of surficial sediments in the Wilmington-Lindenkohl Canyons area,eastern U.S. margin

Stability analysis, based on infinite slope analysis and geotechnical data from a suite of 34 cores collected from the continental slope between Wilmington and Lindenkohl Canyons, indicates that the Quaternary surficial silty clay sediments on gentle slopes are stable; that sediment stability on steeper slopes (14°–19°) is marginal; and that on precipitous slopes (>50°) only a thin veneer of unconsolidated sediments can exist. Small earthquake-induced accelerations or the effects of internal waves can result in slope sediment instabilities.     

Geological aspects of marine slope stability,northwestern Gulf of Mexico

Abstract

The improvement of sensors such as various high‐resolution seismic and navigational systems and side‐scan sonar, of offshore shallow‐water drilling techniques, and of laboratory analyses has allowed the marine geologist to make more accurate identifications and maps of the distribution of numerous types of marine sediment instabilities, as well as to determine the mechanisms responsible for their occurrence. A large number of data on the continental shelf and upper continental slope off the modern delta of the Mississippi river have been compiled; these data will be used to document the major types of slope instabilities. The continental shelf and slope off the modern Mississippi river delta display various types of sediment instability. High rates of sedimentation (up to 80 m per century), weak, high‐water‐content clays, and differential weighting of clay sediments characterize this region. The major types of sediment instabilities that have been documented include (a) Peripheral slumping, with dimensions of slumps ranging from 200 to 1000 m; slumping often occurring in multiple stairstep arrangement; and downslope movement as high as 700 m per year. (b) Shallow diapiric intrusions, ranging in size from a few hundred meters to 2 km in diameter; vertical displacement ranging from 200 to 500 m; rate of sediment movement several meters per year; and intrusions caused by differential sediment loading, (c) Radial graben (tensional faulting), with widths from 50 to 500 m and lengths of several kilometers; both vertical and downslope lateral movements occurring; and downslope movements of surface material as much as 5 m per year common. (d) Circular collapse depressions, with diameters of depressions ranging from 50 to 500 m; topography of depression interiors, hummocky; and depressions possibly caused by dewatering or degassing of sediments under the influence of cyclic wave loading. (e) Surface mudflows, thick (often more than 35 m) masses of surface sediment flowage; often bounded by abrupt seaward slope; mudflows often extending laterally for distances in excess of 100 km; movement sporadic and lobate and rates of movement as much as several hundred meters per year; often being associated with extremely hummocky topography and mud volcanoes; and with extrusion of sediments the possible mechanism. (f) Shelf‐edge arcuate slumps, with large arcuate slumps displacing several hundred meters of sediment; slippage planes are commonly concave. Finally, (g) Various deep‐seated faults, with faults extending from deep horizons up to modern sediment surface; commonly being associated with abrupt scarps on the seafloor; numerous contemporaneous faults; and local slumping associated with fault scarps.     

A seismic reflection study of the External Calabrian Arc in the northern Ionian Sea (eastern Mediterranean)

The External Calabrian Arc is located off the convex side of the Calabro-Peloritanian Arc in the northern Ionian Sea. A systematic reflection seismic survey indicates that it is made of different structural elements whose characters seem consistent with an active accretionary margin. The main structures are the Crotone-Spartivento slope (comparable to an inner trench slope) and the intermediate depressions (comparable to a trench area). Internal to these elements, the Crotone-Spartivento basin may represent a fore-arc basin. This partly outcrops in Calabria and its structure suggests that the accretionary margin developed at least since middle-upper Miocene.Subduction processes do not affect a true oceanic crust, because of the great thickness of sediments covering the whole eastern Mediterranean. Hence some peculiar features occur in the system. as the cobblestone topography, or are lacking, as a typical and continuous trench zone.In the areas with cobblestone topography we distinguish a Calabrian Ridge sensu stricto from a Calabrian Ridge sensu lato. The former is a N-S trending swell, external to the supposed trench zone, interpreted as a sedimentary outer-arc ridge produced by rather surficial tectonic accumulation of sediments further chaoticized by gravitative mechanisms. The Ridge s.l. is a very wide area with low relief and little or no seismic penetration. Tectonization seems gentler than in the Ridge s.s. and structural axes seem to possess different orientations. These areas are interpreted as due to a widespread surficial chaoticization above presumed decollement layers occurring within the sedimentary column of the Ionian bathyal plain.The pattern of deformations of the Calabrian Ridge seems consistent with the Calabro-Peloritanian Arc actively overriding the eastern Mediterranean, with a resultant direction of movement essentially towards the East.     

Regional geochemistry of sediments from the Hellenic volcanic arc in regard to submarine hydrothermal activity

Some 600 surface sediment samples from the Hellenic Volcanic Arc region have been analyzed by bulk and HCl selective leach geochemical techniques. Geostatisti‐cal analysis, followed by further selective leaches on a number of samples, has been used in order to identify any regional hydrothermal influence on the sediments and/or any local hydrothermal metal enrichments. The two main sediment components affecting the geochemical variability in the region are biogenic carbonate and volcaniclastic/terrigenous detritus. Proximity to islands appears to be the primary factor controlling the variability in these components. Sediments from deeper water, to the south of the Hellenic Volcanic Arc and in the Anydros Basin, exhibit some elevated levels of Mn, Co, and Cu, probably of hydrogenous origin. No widespread hydrothermal influence to the sediments in the region is recognized, although this could in part be due to the high sedimentation rates in the region. Localized hydrothermal inputs to sediments are, however, recognized proximal to Santorini, in particular within the northern part of the central caldera. These are predominantly of Fe and associated adsorbed/coprecipitated elements along with some Mn enrichment. Several samples proximal to Milos, just off the coast in the northern part of the central Milos embayment, also show enrichments of commonly hydrothermally associated elements, including Mn, Cu, Zn, and Pb. Data suggest that these enrichments could, in part, be due to weathering of “on‐land”; mineralization as well as hydrothermal inputs.     

Sedimentological processes in the southern margin of the Cretan Sea (NE Mediterranean)

The Cretan Basin can be characterized as a back-arc basin of the Hellenic Trench System, that is related to the subduction zone of the African Plate under the Eurasia Plate. The study area includes the narrow and relatively steep (gradient 1.5°) continental shelf of the island of Crete followed by the steep slope (2°–4°) and the rather flat deeper part of the Cretan basin (water depths >1700 m).Surficial sediments of the coastal zone are coarser and of terrigenous origin, while in deeper waters finer sediments, of biogenic origin, are more abundant. Sand-sized calcareous sediment accumulations, identified in middle-lower slope, may be attributed to the aggregation of seabed biogenic material related to the near bed current activity.High resolution profiles (3.5 kHz) taken from the inner shelf shows a typical sigmoid-oblique progradational configuration, implying prodelta sediment accumulation during the Holocene. In the upper-middle slope, sub-bottom reflectors indicate continuous sedimentation of alternating fine and/or coarse grained material. Small-scale gravity induced synsedimentary faults appeared, locally. In contrast, a series of gravity induced faults, identified in the lower slope, are associated with sediment instabilities due to seismotectonic activity. Sediment cores taken from the shelf-break consists of calcareous muddy sand with small amounts of terrigenous silt and fine sand, while the cores recovered from the middle slope has revealed a more homogeneous fine sediment texture of hemipelagic deposition.The prevailing accumulation processes in the southern margin of the Cretan basin are: (i) prodelta deposition in the inner-middle shelf; (ii) settling from bottom nepheloid layers in the shelf and upper slope; (iii) calcareous sediment formation due to settling from suspension and post accumulation aggregation (middle-lower slope); (iv) long-term episodic sediment gravity processes in the lower slope; and (v) to a lesser extent, redeposition from resuspension due to gravity processes and bottom currents.     

Submarine faults and slides on the continental shelf,northern Gulf of Alaska

Abstract

Submarine faults and slides or slumps of Quaternary age are potential environmental hazards on the outer continental shelf (OCS) of the northern Gulf of Alaska. Most faults that approach or reach the seafloor cut strata that may be equivalent in age to the upper Yakataga Formation (Pliocene‐Pleistocene). Along several faults, the seafloor is vertically offset from 5 to 20 m. A few faults appear to cut Holocene sediments, but none of these shows displacement at the seafloor. Submarine slides or slumps have been found in two places in the OCS region: (1) seaward of the Malaspina Glacier and Icy Bay, an area of 1200 km² with a slope of less than 0.5°, and (2) across the entire span of the Copper river prodelta, an area of 1730 km², having a slope of about 0.5°. Seismic profiles across these areas show disrupted reflectors and irregular topography commonly associated with submarine slides or slumps. Potential slide or slump areas have been delineated in areas of thick sediment accumulation and relatively steep slopes. These areas include (1) Kayak Trough, (2) parts of Hinchinbrook Entrance and Sea Valley, (3) parts of the outer shelf and upper slope between Kayak Island and Yakutat Bay, and (4) Bering Trough.     

Active diapirism and slope steepening,northern gulf of Mexico continental slope

Abstract

Large diapiric and nondiapiric masses of Jurassic salt and Tertiary shale underlie the northern Gulf of Mexico continental slope and adjacent outer continental shelf. These masses show evidence of being structurally active at present and in the very recent geologic past. Local steepening of the sea floor in response to the vertical growth of these structures is a serious concern to those involved in the site selection and the construction of future oil and gas production and transportation facilities in this frontier petroleum province.

The seabed of the northern Gulf slope is hummocky and consists of many hillocks, knolls, and ridges interspersed by topographic depressions and canyon systems. Topographic highs and lows relate respectively to vertical diapiric growth and to withdrawal of large volumes of salt and shale. Topographic highs vary considerably in shape and size, but all have very limited areas of nearly flat sea floor. Intraslope topographic lows consist of three principal types: (1) remnants of submarine canyons blocked by diapiric uplift that terminated active downslope sediment transport common during stages of low sea level; (2) closed depressions formed by subsidence in response to salt and shale withdrawal and flow into surrounding diapiric uplifts; and (3) small collapse basins formed by faulting in strata arched over structural crests of diapirs.

Distribution patterns of both diapiric features and sediment accumulations on the slope are the result of the complex relationship that exists between sediment loading and diapirism. Diapiric activity is proportional to the thickness of salt or underconsolidated shale available for mobilization, and to the sedimentary load distribution on these highly plastic deposits. Variations in overburden load, in turn, are dependent on rates, volumes, and bulk densities of depo‐sitional influx; proximity to sources of supply, erosion, and distribution of sediments; and topographic control of sediment accumulation. Sediment capture in diapirically controlled interdomal basins and canyon systems localizes overburden load, thus inducing further diapiric growth, and complex structural and stratigraphic patterns are induced throughout the continental slope region.

Drill cores in the slope province indicate that most of the slope sediments are fine‐grained muds; appreciable quantities of sand‐size sediment are present principally in canyon axes. Turbidite sand layers drilled on a topographic high adjacent to the Gyre Basin reflect uplift far above their original deposition level, and calculations yield rates of uplift that average 2 to 4 m per 100 years. Seismic reflection profiles provide considerable evidence of “fresh”; slumps and ero‐sional surfaces on the flanks of many topographic highs not yet blanketed by a veneer of young sediments. This evidence thus supports our conclusion that the present continental slope region of the northern Gulf of Mexico is undergoing active diapirism and consequent slope steepening. Because most of the sediment on the flanks of diapiric structures consists of underconsolidated muds, slumping will take place regularly in response to further diapiric movement.     

A study of stability of the seafloor foundation on a gently sloping continental shelf

Abstract

The possibility of seafloor failure under external loadings on a gently sloping continental shelf is controlled, to a large extent, by the geotechnical characters of subbottom sediments (e.g., shear strength, compressibility, and liquefaction potential) and structural factors (e.g., sedimentary stratification). By means of undis‐turbing coring, in‐situ acoustic measurement, and subbottom profiling, the authors conducted an investigation into the seafloor instabilities and possibilities of sediment slope failure within the continental shelf off the Pearl River mouth, which is one of the most important areas for offshore development in the northern South China Sea. Based on in‐situ and laboratory measurements and tests for sediment physical properties, static and dynamic behavior, and acoustic characteristics, the analyses indicate: (1) subbottom sediments that originated from terrigenous clay during the Pleistocene are compact and overconsolidated, and the mean sound velocity in such sediments is relatively high; (2) the maximum vertical bearing capacity of subbottom sediments is efficiently conservative on the safe side for dead loads of light structures, and the trench walls are stable enough while trenching to a depth of about 2 m below the seafloor under still water; and (3) it is quite improbable that the subbottom sediments liquefy under earthquake (M ≤ 6) or storm wave loading.     

Distribution and morphology of large submarine sediment slides and slumps on Atlantic continental margins

Abstract

Numerous large sediment slides and slumps have been discovered and surveyed on the continental margins of Northwest Africa, Southwest Africa, Brazil (Amazon Cone), the Mediterranean, the Gulf of Mexico, and North America over the past 10 years. The mass movements are of two primary types: (1) translational slides, and (2) rotational slumps. Translational slides are characterized by a slide scar and a downslope zone of debris flows, after traveling in some areas for several hundreds of kilometers on slopes of less than 0.5°. Rotational slumps are bounded by steep scarps, but they do not involve large‐scale translation of sediments, although seismic records indicate disturbance in the down‐dropped block. Many of the slides and slumps have occurred in water depths greater than 2000 m on initial slopes of less than 1.5°. The largest slide so far discovered is off Spanish Sahara; in this case, the slide scar is 18,000 km² in area, at least 600 km³ in volume of translated sediments. No apparent consistent relationship has yet been observed between the presence of the slides and the sedimentary environment in which they occurred. The slides off Southwest Africa and Spanish Sahara occurred in pelagic sediments rich in planktonic organic matter. In contrast, the slides off North America, Senegal‐Mauritania, and Brazil (Amazon Cone) occurred in sediments containing a high percentage of terrigenous material from nearby landmasses. Large sediment slides have also occurred in pelagic sediments on isolated oceanic rises such as the Madeira Rise (East‐Central Atlantic) and the Ontong‐Java Plateau (Pacific), where sedimentation rates are less than 2 cm/1000 years. The failure mechanism of the slides initiated near the shelf edge can probably be explained by sediment overloading during low glacio‐eustatic sea level, which allowed rivers to debouch sediments directly onto the outer shelf or upper slope. Possible mechanisms of failure of the deepwater slides and slumps include earthquakes, undercutting of the slope by bottom currents, and changes in porewater pressures induced as a direct or indirect result of glacio‐eustatic changes in sea level.     

Mass movements,geotechnical properties,and slope stability in the outer shelf—Upper slope,northwestern Aegean sea

Abstract

Subbottom profiling (3.5 kHz) in the uppermost slope of the outer shelf of the northwestern Aegean Sea has shown downslope slumping and intense sediment deformation as well as a succession of microslumping within the Late Pleistocene delta sequences. Postdeposition bottom erosion by currents and the overconsolidated sediments (Cu/Po > 1) indicate the termination of deformations a long time ago. Deformation processes are estimated to have been active 18,000–10,000 B.P. Large‐scale active downslope deformations with clockwise sediment block rotation have affected the area as well. These longer‐period deformations are associated with regional neotectonics and older unconformities (i. e., Plio‐Pleistocene) as potential slide planes.

Geotechnical properties reflect mainly textural variations and locally (within sapropelic layers) high organic matter content. Relatively high values of shear strength were measured (5–29 kPa) with intermediate sensitivities (2–5), whereas relatively low values of water content (33–81%) were found along the five selective sediment cores.

Infinity slope stability analysis revealed that the slopes in the study area are most stable, although theoretical evaluations (Cu estimated from linear regression analysis) indicate relative instability for the potential glide plane at 20 m depth. The outer shelf is covered by compact relict sands, and their gentle and low‐angle (<0.2°) slopes are the most stable region of the investigated area.     

Geophysical assessment of submarine slide northeast of Wilmington canyon

Abstract

As part of a National Oceanic and Atmospheric Administration (NOAA) program to understand bottom and nearbottom processes on the continental margin, the continental slope seaward of the coast of Delaware, just east of the Baltimore Canyon Trough, and northeast of Wilmington Canyon was studied in detail. With a suite of geophysical data, a 7.5 × 13.0‐km portion of the continental slope was surveyed and found to be composed of a large submarine slide, approximately 11 km ³ in volume. The slide varies from 50 to 300 m in thickness and is believed to be composed of Pleistocene Age sediments. The internal structure of the continental slope can be seen on the seismic reflection profiles, as well as the readily identifiable continuous slip surface. Pliocene to Cretaceous horizons comprise the continental margin with Pliocene to Eocene horizons truncated at the slip surface. Sediment failure occurred on the slope between the late Tertriary erosion surface, which shaped the continental margin, and the overlying Quaternary sediments. A mechanism suggested to have contributed to the sediment failure is a late Pleistocene lower stand of sea level. Creep of surficial sediments is believed to be active on the surface of the submarine slide, indicating present‐day instability.     

Hellenic Trench sedimentation: An approach using terrigenous distributions

Sand-sized terrigenous material from 450 samples representing 24 piston cores is used to compare slope, perched slope basin, and trench apron, plain and margin depositional environments within the Hellenic Trench west of the Peloponnesus. Recognition of three stratigraphically defined layers in the core sections served as a basis for evaluating changes in time. Statistical testing showed that within the upper defined layer (0–5700 yrs. B.P.) terrigenous grains are distributed rather uniformly throughout the slope and basin complexes in contrast to distributions in underlying layers (5700–17,000 and 17,000–45,000 yrs. B.P., respectively. These distributions reflect intense reworking by gravitative processes as evidenced by sediment structures, incomplete slope sections, high accumulation rates, and dilution of sapropels. The homogeneity of the upper layer is explained by failure and downslope transport of sediments that were deposited on the slope during lower stands of sea level. The quantitative analyses performed highlight the rapidity by which land-derived sediments by-pass high-relief slopes, temporarily reside in perched basins on the slope, and ultimately are dispersed to distal trench apron and basin environments by sporadic gravity flows.     

Shelf morphology and surficial sediment off Central and Northern South West Africa (Namibia)

The continental margin is divisible in two at latitude 18°40/S based on the shelf morphology and the composition of the surficial sediment. North of this latitude, the Kunene Shelf is narrow (Av. 44 km) with a terrigenous sediment cover whereas southwards from there, the Walvis Shelf is wide (Av. 119 km), deep (Av. shelf-break depth 361 m), and dominated by biogenic components. Locally, the Walvis Shelf is sculptured by basement faulting and marginal fractures and the inner shelf has been modified by upbuilding. Sediment slumping on the slopes of both regions was a common phenomenon during the Quaternary. Reproduced under Copyright Authority 7628 of 26/2/81 of the Government Printer of the Republic of South Africa.     

陆架斜坡对内孤立波的动力响应特性试验研究

针对内孤立波在行进过程中遇到海底斜坡会对海底产生力的作用,不同坡度斜坡对内孤立波的动力响应应该存在差异。本文通过水槽中制造内波,对不同角度的斜坡对内孤立波的动力响应过程进行了研究。结果表明,内孤立波通过陆架斜坡上方,会造成斜坡沉积物超孔隙水压力的积累;在相同振幅条件下,缓坡沉积物动力响应的幅度比陡坡沉积物大;随着振幅的增加,缓坡发生动力破坏程度大于陡坡;在斜坡沉积物稳定性受到破坏之前,超孔隙水压力的积累和释放同时存在,内孤立波振幅的增大会加剧超孔隙水压力的释放。该结果对于斜坡沉积物在内孤立波作用下失稳破坏的动力学研究和斜坡稳定性分析将起到指导作用。     

Northwestern Hellenic Arc: Concurrent sedimentation and deformation in a compressive setting

Seismic (air-gun) and 3.5-kHz systems and coring in the northwestern sector of the Hellenic Arc, Ionian Sea, serve to define the regional configuration, attitude and geometry of the unconsolidated sedimentary cover in a compressive tectonic setting. The Pliocene and Quaternary deposits are deformed to varying degrees throughout the region southwest of the island of Zakinthos. Depositional trends, overall structural configuration of the cover, and assemblages of deformation structures, including tilted, folded and faulted strata associated with a very complex topography, clearly reflect syndepositional modification in a tectonically mobile area. The structural attitude of the unconsolidated strata can be distinguished from that in tectonically active regions of the Mediterranean where extension prevails. The youthful physiography, sediment dispersal patterns and depositional distribution reveal prevailing NW—SE and NE—SW trends. Sediment deformation structures, whose axes strike primarily NW—SE, reveal a general NE—SW compressive stress trend. The geologically recent nature and orientation of the deformation are compatible with present theories concerning the evolution of the Hellenic Arc.     

Analysis of submarine slumping in the continental slope off the southern coast of Israel

Abstract

The continental slope off the coast of Israel is riddled with numerous large slump scars at depths greater than 400 m. Recent scar slumps are situated in the steepest central portions of the continental slope (400–450 m depth, α=6°), frequently disfiguring older slump scars in its lower portions. The slumping materials were probably largely transported downslope in the form of density currents, and occasionally by sliding of large sediment chunks. Upslope retrogressive slumping phases progressively disfigure the shape of the slump scars until they totally disappear, causing net reduction of the thickness of the sedimentary column. To provide a basis for the quantitative analysis of slumping, laboratory vane tests, triaxial consolidated, undrained compression tests with pore‐pressure measurements, drained direct shear tests, and consolidation tests were performed oh undisturbed samples. Because the sediments consist of normally consolidated silty clays, the geotechnical properties measured on the core samples can be readily extrapolated for greater depths, assuming the sediments are homogeneous. Angles of internal friction measured by direct shearing under drained conditions are ?_d =24°‐25°, designating the maximum possible angle of a stable infinite slope. These angles are appreciably higher than the steepest slopes in the investigated area, and a drained slumping mechanism is therefore considered unlikely. The slopes of the slump scar walls are about 20°; therefore, in the absence of active erosional, sedimentological, or tectonic agents, these walls have long‐term stability (drained shear). Undrained shear failure resulting in slope instability may be attributable to rapid changes in slope geometry (undercutting or oversteepening of the slope), fluctuations in pore pressure, or accelerations associated with earthquakes. Undrained shear‐strength parameters were determined by both laboratory consolidated‐un‐drained triaxial tests and by miniature vane shear tests. The angles of internal friction that were measured are ?_cu =15°‐17°, and the c_u/p_o values range between 0.22 and 0.75. An analysis of the force equilibrium within the sediments leads to the conclusion that horizontal earthquake‐induced accelerations, as little as 5–6% of gravity, are sufficient to cause slope failure in the steepest slope zone (400–450 m depth, α = 6°, c_u /p_o =0.25). Collapse resulting from liquefaction is unlikely, as the sediments are normally consolidated silty clays with intermediate sensitivity, S_t =2–4.

The existence of slump scars in the lower portion of the continental slope, characterized by gentle slopes (α=1°‐3°) and sediments with high shear strength (c _u /p _o=0.30–0.50) is attributed to large horizontal accelerations(k=12–16% of gravity). Owing to the wide range of geotechnical properties of the sediments (c_u /p_o = 0.20–0.75) and the inclination of the continental slope (α=1°‐6°), the same earthquake may generate a wide range of horizontal accelerations in different portions of the continental slope, and slumping may occur wherever the stability equilibrium is disrupted.     

A critical test of the concept of submarine equilibrium profile

The existence of a slope equilibrium profile has been widely used to account for erosional and depositional processes on submarine slopes and turbidite systems. Profiles out-of-equilibrium are commonly observed in actively deforming areas where channels seem to be deflected or diverted by seafloor structures. In this study the concept of the submarine equilibrium profile is tested in an area of extensive surface faulting to examine whether channels adopt an equilibrium-type profile through time. The study area is on the slope of the Nile Delta, which is disrupted by a number of surface-rupturing normal faults. Prior to fault linkage, several submarine channels flowed down the slope and either utilised relay ramps or flowed through fault scarps of the fault array. Where a relay ramp had been utilised, post fault linkage, the channels of the area either avulsed or converged into one major channel in response to a change in the deformed slope profile to a more concave shape. The thalweg of the post fault linkage channel and two slope profiles either side of it are measured in the area of the fault array, to understand how the channel evolved in response to the active faulting. When fault displacement is relatively small the combination of channel erosion and aggradation results in a channel thalweg profile near-equilibrium with predictable modifications of channel dimensions (depth and width) even if sediment supply was infrequent and episodic. It is concluded that turbidite channels can conform to the concept of equilibrium and submarine base level if it is the most energy efficient route for submarine gravity flows downslope. The most energy efficient route will be one where flows bypass the slope without eroding or depositing and move in a direct downslope course towards base level.     

Analysis of submarine slumping in the continental slope off the southern coast of Israel

Abstract

The continental slope off the coast of Israel is riddled with numerous large slump scars at depths greater than 400 m. Recent scar slumps are situated in the steepest central portions of the continental slope (400–450 m depth, α = 6°), frequently disfiguring older slump scars in its lower portions. The slumping materials were probably largely transported downslope in the form of density currents, and occasionally by sliding of large sediment chunks. Upslope retrogressive slumping phases progressively disfigure the shape of the slump scars until they totally disappear, causing net reduction of the thickness of the sedimentary column. To provide a basis for the quantitative analysis of slumping, laboratory vane tests, triaxial consolidated, undrained compression tests with pore‐pressure measurements, drained direct shear tests, and consolidation tests were performed oh undisturbed samples. Because the sediments consist of normally consolidated silty clays, the geotechnical properties measured on the core samples can be readily extrapolated for greater depths, assuming the sediments are homogeneous. Angles of internal friction measured by direct shearing under drained conditions are ?_d =24°‐25°, designating the maximum possible angle of a stable infinite slope. These angles are appreciably higher than the steepest slopes in the investigated area, and a drained slumping mechanism is therefore considered unlikely. The slopes of the slump scar walls are about 20°; therefore, in the absence of active erosional, sedimentological, or tectonic agents, these walls have long‐term stability (drained shear). Undrained shear failure resulting in slope instability may be attributable to rapid changes in slope geometry (undercutting or oversteepening of the slope), fluctuations in pore pressure, or accelerations associated with earthquakes. Undrained shear‐strength parameters were determined by both laboratory consolidated‐un‐ drained triaxial tests and by miniature vane shear tests. The angles of internal friction that were measured are ?_cu =15°‐17°, and the c_u/p _o values range between 0.22 and 0.75. An analysis of the force equilibrium within the sediments leads to the conclusion that horizontal earthquake‐induced accelerations, as little as 5–6% of gravity, are sufficient to cause slope failure in the steepest slope zone (400–450 m depth, α=6°, c_u/p _o=0.25). Collapse resulting from liquefaction is unlikely, as the sediments are normally consolidated silty clays with intermediate sensitivity, S_t =2–4.

The existence of slump scars in the lower portion of the continental slope, characterized by gentle slopes (α=1°‐3°) and sediments with high shear strength (c_u/p _o=0.30–0.50) is attributed to large horizontal accelerations (k= 12–16% of gravity). Owing to the wide range of geotechnical properties of the sediments (c_u/p _o= 0.20–0.75) and the inclination of the continental slope (α=1°‐6°), the same earthquake may generate a wide range of horizontal accelerations in different portions of the continental slope, and slumping may occur wherever the stability equilibrium is disrupted.     

Worst scenarios of tsunami effects along the Mediterranean coast of Egypt

Scenarios of tsunami effects represent a very useful technique for the definition and evaluation of tsunami hazard and risk for the Egyptian coast. This paper is an attempt to develop different worst scenarios of tsunamigenesis toward the Egyptian Coast for five segment localities along three different sub-regions (Hellenic Arc, Cyprean Arc and Levantine Coast) in the eastern Mediterranean Sea. These segments are the southwest Hellenic Arc, southeast Hellenic Arc, northeast Hellenic Arc, west of Cyprean Arc and Levantine. For each of them, the scenario takes into account a seismic fault capable of generating an earthquake with magnitude equal to or larger than the highest magnitude registered in that region in historical times. Then the ensuing tsunamis are simulated numerically, highlighting the basic features of the wave propagation and roughly identifying the coastal sectors that are expected to suffer the heaviest tsunami effects. The output data indicated that the first wave of tsunamis from different segments attacked the nearest reference localities (city located nearest each segment) along the Egyptian shore between 28 and 50 min after an earthquake. Tsunamis from these earthquake scenarios produced maximum run-up heights ranging from 1.7 to 9.4 m at the shore. A Beirut Thrust scenario (Levantine segment) included the fact that only a small portion of the fault extended out into the sea, leading to a small effective tsunami source area. In contrast, the southwest Hellenic Arc segment (as in the A.D. 365 earthquake) has high displacement (15 m) and a long extensional fault, forming a highly effective tsunami source area.     

Northern Gulf of Mexico continental slope

The hummocky continental slope in the northwestern Gulf of Mexico is the result of active salt tectonism and accompanying faulting. Fluid and gassy hydrocarbons rise through the sediment column and along faults causing the formation of gas hydrates, gassy sediments, mud volcanoes and mounds, chemosynthetic communities and authigenic carbonates, reefs, and hardgrounds. Salt activity coupled with processes associated with relative sea level fluctuations create a feedback relationship resulting in the above-mentioned phenomena as well as others such as seafloor erosion at great water depths.