Assessment of trace metal contents in water and bottom sediments from Eğirdir Lake,Turkey

The concentration of metals (Pb, As, Co, Cu, Ni, Zn, Fe and Mn) was investigated in water and sediment samples of E?irdir Lake. The Lake is the second largest fresh water lake of Turkey and it is used as drinking water in the region. The anthropogenic pollutants are primary sources of trace metals which are negatively affected lake water quality. These negative effects were observed in both lake water and bottom sediments. According to obtained data, Pb, Cu, Ni, Fe and Zn have significant enrichment in sediments samples. In addition, the hydrodynamic model of the lake was determined as effectively for Pb, Co, Cu, Ni, Zn, Fe and Mn accumulations. Also, the effect of anthropogenic pollutants was found to be more dominant than geogenic effect in metal accumulation of the lake bottom sediments. Therefore, anthropogenic pollutants within the lake basin should be consistently controlled for the sustainable usage of the lake.     

Heavy metal distribution in the surface layer of bottom sediments of the Kara Sea

This paper addresses the distribution of heavy metals (Co, Ni, Cu, Zn, Cd, Sn, Sb, Pb, and Bi) as well as Si, Al, Fe, and Mn in the surface (0–2 cm) layer of bottom sediments of the Kara Sea. The contents of these elements are determined in each of the previously distinguished facies-genetic types of terrigenous sediments: fluvial, glacial, estuarine, shallow water–marine, “background” marine, and relict sediments. It is shown that these types reflect the modern conditions of accumulation of river discharge material, which forms fans of two greatest Siberian rivers, Ob and Yenisei. The main stages are distinguished in heavy metal accumulation. The first stage is related to the avalanche sedimentation of terrigenous sediments in the estuary and characterized by the elevated contents of Co, Ni, Cu, Zn, Cd, Sb, and Bi. The second stage reflects the mechanical differentiation of sedimentary material by waves and bottom currents in a shallow-water sea part adjacent to the estuarine zone, with accumulation of Pb- and Sn-bearing “heavy” ore minerals. The deepwater background terrigenous–marine sediments accumulate mainly Ni, Zn, and Cd, as well as Mn. The relict sediments differ in the high contents of Si, Mn, and Sn.     

Geochemical features of heavy metals in core sediments of northwestern Taihu Lake, China

Sequential core sediments from northwestern Taihu Lake in China were analyzed for grain size, organic carbon and heavy metal content. The sediments are composed of organic-poor clayey-fine silts. The chemical speciations of Cu, Fe, Mn, Ni, Pb, and Zn were also analyzed using the BCR sequential extraction procedure. Cu, Fe, Ni, and Zn are mainly associated with the residue fraction; Mn is concentrated mainly in exchangeable/carbonate fraction and residue fraction; and Pb mainly in Fe/Mn oxide fraction and organic/sulfide fraction. The exchangeable/carbonate fractions of Cu, Fe, Ni, Zn and Pb are lower. The fractions of Ni, Pb and Zn bound to the Fe/Mn oxide have significant correlations with reducible Mn; the organic/sulfide fractions of Cu, Mn, Ni, Pb, and Zn have significant correlations with TOC. The extractable fractions of Cu, Mn, Ni, Pb, and Zn are high at the top 4 cm of the core sediments as compared to those in the deeper layers, showing the anthropogenic input of heavy metals is due to rapid industrial development. The heavy metal pollution history of the sediments has been recorded since the late 1970s, determined by the result of ^137Cs dating.     

Speciation of some heavy metals in bottom sediments of the Ob and Yenisei estuarine zones

The speciation of Fe, Mn, Zn, Cu, Co, Ni, Cr, Pb, and Cd was studied in 52 samples of bottom sediments collected during Cruise 49 of the R/V Dmitrii Mendeleev in estuaries of the Ob and Yenisei rivers in the southwestern Kara Sea. Immediately after sampling, the samples were subjected to on-board consecutive extraction to separate metal species according to their modes of occurrence in the sediments: (1) adsorbed, (2) amorphous Fe-Mn hydroxides and related metals, (3) organic + sulfide, and (4) residual, or lithogenic. The atomic absorption spectroscopy of the extracts was carried out at a stationary laboratory. The distribution of Fe, Zn, Cu, Co, Ni, Cr, Pb, and Cd species is characterized by the predominance of lithogenic or geochemically inert modes (70–95% of the bulk content), in which the metals are bound in terrigenous and clastic mineral particles and organic detritus. About half of the total Mn amount and 15–30% Zn and Cu is contained in geochemically mobile modes. The spatiotemporal variations in the proportions of metal species in the surface layer of sediments along the nearly meridional sections and through the vertical sections of bottom sediments cores testify that Mn and, to a lesser extent, Cu are the most sensitive to changes in the sedimentation environment. The role of their geochemically mobile species notably increases under reducing conditions.     

太平洋北部铁锰结核富集区沉积物的元素地球化学特征

本文对太平洋北部铁锰结核富集区沉积物的元素地球化学作了较为详细的研究。因子分析提供的信息表明,元素的分布主要受三个因子控制:（1）粘土及Fe、Mn氧化物水化物胶体的吸附作用;（2）生物化学作用过程有关的自生沉积作用;（3）海底页岩风化及附近海区的火山喷发作用。元素的来源:（1）Fe、Mn、Cu、Co、Ni、Zn、Cr、Cr、Mg、Al、Ti、K共生,主要来自粘土吸附;（2）C_有机、N、Sr、Na及Si、Ca、Sr主要来自生物化学过程沉积;（3）Pb主要来源于岩石碎屑（火山喷发碎屑）。     

Geochemical features of REE and Y accumulation in the subcolloid fraction of sediments from the northern part of Amur Bay (Sea of Japan)

The average contents of REE, Y, Fe, Mn, and clay minerals were determined in the subcolloid fraction of bottom sediments from the northern part of Amur Bay. The positive correlation of REE and Y contents with Fe and Mn is related to their flocculation and sorption on Fe, Mn oxyhydroxides and clay minerals (hydromica, smectites). The sediments are subdivided into three groups (sediments from the influence zone of the Razdol’naya River, sediments located along the eastern and western shores of the bay, and sediments weakly subjected to the river influence) with different average contents of REE, Y, Fe, and Mn. It is shown that REE and Y are mainly incorporated (98–100%) in clay minerals.     

Thermodynamic modeling of heavy metal forms in bottom sediments: By the example of the Ivankovsky Reservoir

The technique of thermodynamic modeling for interactions in system “pore water-solid phase of bottom sediments” is suggested (including dissolved and sorbed forms of heavy metals). The main sorbent phases (clay minerals, iron and manganese hydroxides, and organic matter) are presented as multi-component ideal solid solutions. The capacities of sorbing phases are calculated according to the results of selective extraction by the Tessier scheme supplemented with determination macro-cations. The selectivity constants and free energy of metal bonding (Fe, Mn, Zn, Cu, Ni, Pb, Co, and Cd) with sorbing phases are calculated for bottom sediments of various compositions within the Ivankovsky Reservoir and the estimation of their natural variations is given.     

Geochemical features of the ecosystem of Lake Kolyvan (Altai territory) and related technogenic impact

Regularities of the formation of bottom sediments down to a depth of 1.2 m, as well as factors governing the composition of sediments, waters, and soils in the catchment area of the lake, are discussed. It has been established that the chemical composition of lacustrine sediments is closely associated with the composition of soils in the ambient watersheds, and the soils, in turn, are associated with the composition of the soil-forming rocks. The available data suggest an extremely irregular contamination of the lake system by technogenic radionuclides within the water area. Maximum radiocesium contamination of lacustrine bottom sediments is 350 mCi/km² (recalculated to year 2000). Concentrations of elements (Cu, Zn, Cr, Ni, Co, Mg, Be, Sb, Mn, and others) in bottom sediments, water, and soils in catchment areas of Lake Kolyvan do not exceed the background values (except for the Hg content in bottom sediments), suggesting that the area under consideration is not contaminated by inorganic technogenic components.     

The Heavy Metals Speciations in Bottom Sediments of Vyshny Volochek Reservoir

The water ecosystem of the Vyshny Volochek Reservoir is characterized based on the study of the distribution of heavy metals speciations in the solid phase and pore waters of bottom sediments. Using the sequential extraction procedure, it is shown that Mn is mainly present in exchangeable and carbonate-bound forms; significant roles for Fe, Zn, Pb, and Co are played by forms that are bound to iron and manganese hydroxides and Cu and Ni are mainly bound to organic matter. Thermodynamic calculations have established the prevailing share of the following forms in pore waters: free ions for Zn, Ni, Co, and Cd, carbonate complexes for Pb, and fulvic complexes for Cu. It has been revealed that the speciation forms of heavy metals in bottom sediments depend on the lithological features and content of organic matter in sediments.     

Distribution and immobilization of heavy metals in Pliocene aquifer sediments in Wadi El Natrun depression, Western Desert

The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.     

Environmental assessment of heavy metal contamination in bottom sediments of Al-Kharrar lagoon,Rabigh, Red Sea,Saudi Arabia

In order to assess the pollution levels of selected heavy metals, 45 bottom sediment samples were collected from Al-Kharrar lagoon in central western Saudi Arabia. The concentrations of the heavy metals were recorded using inductively coupled plasma-mass spectrometer (ICP-MS). The results showed that the concentrations of Pb and Cd exceeded the environmental background values. However, the heavy metal contents were less than the threshold effect level (TEL) limit. The concentrations of heavy metals in lagoon bottom sediments varied spatially, but their variations showed similar trends. Elevated levels of metals were observed in the northern and southern parts of the lagoon. Evaluation of contamination levels by the sediment quality guidelines (SQG) of the US-EPA revealed that sediments were non-polluted-moderately to heavily polluted with Pb; non-polluted to moderately polluted with Cu; and non-polluted with Mn, Zn, Cd, and Cr. The geoaccumulation index showed that lagoon sediments were unpolluted with Cd, Mn, Fe, Hg, Mo, and Se; unpolluted to moderately polluted with Zn and Co; and moderately polluted with Pb, Cr, Cu, and As. The high enrichment factor values for Pb, As, Cu, Cr, Co, and Zn (>2) indicate their anthropogenic sources, whereas the remaining elements were of natural origins consistent with their low enrichment levels. The values of CF indicate that the bottom sediments of Al-Kharrar lagoon are moderately contaminated with Mn and Pb.     

Modern Bottom Sediments of Lake Onega: Structure,Mineralogical Composition,and Systematization of Rare-Earth Elements

The results of studying the structure and mineral composition of the Upper Holocene bottom sediments of Lake Onega are presented. It is established that there are two types of columns of bottom sediments, for which stratification of layers and formation of Fe–Mn crusts are determined by the diagenesis processes occurring under physicochemical conditions of sediment accumulation according to two scenarios. The distribution spectra of rare-earth elements (REEs) are different in the indicated types of columns, which is apparently attributed to the differences in the oxidation–reduction conditions at the water–sediment interface during the formation of REEs and possibly to the influence of hydrothermal processes.     

Geochemistry and specific features of manganese ore formation in sediments of oceanic bioproductive zones

Processes of authigenic manganese ore formation in sediments of the northern equatorial Pacific are considered on the basis of study of the surface layer (<2 mm) of ferromanganese nodule and four micronodule size fractions from the associated surface sediment (0–7 cm). Inhomogeneity of the nodule composition is shown. The Mn/Fe ratio is maximal in samples taken from the lateral sectors of nodule at the water-sediment interface. Compositional differences of nodules are related to the preferential accumulation of microelements in iron oxyhydroxides (P, Sr, Pb, U, Bi, Th, Y, and REE), manganese hydroxides (Co, Ni, Cu, Zn, Cd, Mo, Tl, W), and lithogenous component trapped during nodule growth (Ga, Rb, Ba, and Cs). The Ce accumulation in the REE composition is maximal in the upper and lower parts of the nodule characterized by the minimal Mn/Fe values. The compositional comparison of manganese micronodules and surface layers of the nodule demonstrated that the micronodule material was subjected to a more intense reworking during the diagenesis of sediments. The micronodules are characterized by higher Mn/Fe and P/Fe ratios but lower Ni/Cu and Co/Ni ratios. The micronodules and nodules do not differ in terms of contents of Ce and Th that are least mobile elements during the diagenesis of elements. Differences in the chemical composition of micronodules and nodules are related not only to the additional input of Mn in the process of diagenesis, but also to the transformation of iron oxyhydroxides after the removal of Mn from the close association with Fe formed in the suspended matter at the stage of sedimentation.     

Distribution of heavy metals in the clastic fine-grained sediments of Gavkhuni playa lake (Southeast of Isfahan,Iran)

The sedimentary basin of Gavkhuni playa lake includes two sedimentary environments of delta and playa lake. These environments consist of mud, sand and salt flats. There are potentials for concentration of heavy metals in the fine-grained sediments (silt and clay) of the playa due to existence of Pb/Zn ore deposits, industrial and agricultural regions in the water catchment of Zayandehrud River terminating to this area. In order to study the concentration of heavy metals and the controlling factors on their distribution in the fine-grained sediments, 13 samples were taken from the muddy facies and concentration of the heavy metals were determined. The results showed that the heavy metal concentrations range in the sediments (in ppm) are Mn (395.5–1,040), Sr (100.4–725.76), Pb (14.66–91.06), Zn (23.59–80.9), Ni (37–73.66), Cu (13.83–29.83), Co (5.73–13.78), Ag (3.03–4.76) and Cd (2.3–5.5) in their order of abundances. The concentration of Ag is noticeable in the sediments relative to the average concentration of this element in mud sediments. The amounts of Pb and Zn are relatively high in all the samples in comparison with the other elements. The concentration of Ni is relatively high in the oxidized samples. The distribution of Pb is directly related to organic matter content of the sediments. The concentrations of Zn, Sr, Cu, Co and Cd in the samples of the playa are lower than those in the delta. The amount of illite is another factor influencing Zn and Pb concentrations. Sr is more concentrated in the sediments with the high content of calcium carbonate. The distribution pattern of Cu, Co, Pb and Mn resembles to that of the clay content of the sediments. The clay content shows positive correlations with Co, Cu and Mn concentrations and negative correlation with Ag. The Sr and Ag concentrations are positively correlated with the amount of CaCO₃. The amounts of Co, Cu, Ni and Mn show negative correlations with the calcium carbonate content. Pb and Co are noticeably correlated with Mn.     

Present environment of Dam Lake Sambe,southwestern Japan: a geochemical study of bottom sediments

Geochemical analyses of lakebed and core sediments from Lake Sambe on the outskirts of Oda City in Shimane prefecture in southwestern Japan were carried out in order to assess the water quality and the concentration and distribution patterns of sixteen elements. The lake water showed a stratified condition with respect to dissolved O₂, and As, Fe, and Mn concentrations in the bottom layers which increased in the summer. The chemical composition of the sediments, as measured by X-ray fluorescence, included major and trace elements (P, Ca, Sc, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Sr, Zr, Pb, and Th), and total sulfur (TS). Elevated values of As, Zn, V, Fe, P, and TS were present in several layers of the upper cores (from 0 to 5 cm) and other surface sediments. Increases in the abundances of these metals in lake sediments are probably related to the reducing condition of the sediments, fine-grained organic rich sediments, and post-depositional diagenetic remobilization. Moreover, correlations between the concentrations of trace metals and iron in the sediments suggest their adsorption onto Fe (oxy)hydroxides, whereas correlations with sulfur indicate that they were precipitated as Fe-sulfides. The average abundances of As, Pb, Zn, and Cu exceeded the lowest effect level and Interim Sediment Quality Guideline values that the New York State Department of Environmental Conservation and the Canadian Council of Ministers of the Environment determined to have moderate impact on aquatic organisms. In addition, concentrations of As and Zn exceeded the Coastal Ocean Sediment Database threshold value, indicating potentially toxic levels. Therefore, the presence of trace metals in the lake sediments may result in adverse effects on biota health.     

The mineralogy and geochemistry of the sediments of northwestern Lake Victoria

In the nearshore area of northwestern Lake Victoria a thin strip of quartzarenite sand occurs which grades lakeward into silty clay consisting of quartz with subordinate amounts of K-feldspar, plagioclase, kaolinite, illite, vermiculite and organic matter. Varimax matrix determinations of the element concentrations in the lake-bottom sediments extractable by aqua regia indicate that: (1) there is a strong association of Cr, Cu, Zn and Ni; (2) there is a strong association of Fe, Mn and Co; (3) Cu and Ni show moderate to slight associations with organic matter; (4) Ca is relatively independent of the other elements. The general decrease in the pH values of the surface and bottom waters outward from the lake shore, with consistently higher values for the surface water relative to the bottom waters, results from decreasing levels of photosynthetic activity.     

Major and trace element geochemistry in Zeekoevlei, South Africa: A lacustrine record of present and past processes

This study reports a multi-parameter geochemical investigation in water and sediments of a shallow hyper-eutrophic urban freshwater coastal lake, Zeekoevlei, in South Africa. Zeekoevlei receives a greater fraction of dissolved major and trace elements from natural sources (e.g., chemical weathering and sea salt). Fertilizers, agricultural wastes, raw sewage effluents and road runoff in contrast, constitute the predominant anthropogenic sources, which supply As, Cd, Cu, Pb and Zn in this lake. The overall low dissolved metal load results from negligible industrial pollution, high pH and elevated metal uptake by phytoplankton. However, the surface sediments are highly polluted with Pb, Cd and Zn. Wind-induced sediment resuspension results in increased particulate and dissolved element concentrations in bottom waters. Low C/N ratio (10) indicates primarily an algal source for the sedimentary organic matter. Variation in sedimentary organic C content with depth indicates a change in primary productivity in response to historical events (e.g., seepage from wastewater treatment plant, dredging and urbanization). Primary productivity controls the enrichment of most of the metals in sediments, and elevated productivity with higher accumulation of planktonic debris (and siltation) results in increased element concentration in surface and deeper sediments. Aluminium, Fe and/or Mn oxy-hydroxides, clay minerals and calcareous sediments also play an important role in adsorbing metals in Zeekoevlei sediments.     

Remobilization of transition metals in surficial pelagic sediments from the eastern Pacific

The top thirty centimeters of sediment at two sites in the eastern equatorial Pacific contain evidence of post-depositional remobilization of Mn, Fe, Co, Ni, Cu, and Zn. Remobilization takes place as Mn and Fe oxyhydroxides are released to the pore water during the microbially-mediated decomposition of organic matter. Precipitation of the dissolved metals in near-surface more oxic strata controls the solid-phase distribution of Mn, Fe, and Zn. The solid-phase redistribution of Co and Ni requires only suitable material for readsorption. Comparison of pore water fluxes with solid-phase metal distributions in the solid sediment indicates no loss of dissolved metal to the overlying water column at the present time. Loss of Mn during the Quaternary is indicated by the composition of the sediments, however. Leaching experiments suggest that portions of the mobile Mn, Fe, Co, Ni, and Cu are fixed by incorporation in authigenic smectite in the surficial sediments.     

Plankton: Its chemical composition and its significance as a source of pelagic sediments

The absolute concentrations of minor and trace elements vary considerably in plankton. However, normalization of elemental abundances versus the minor elements Fe, Al and Zn (instead of the commonly used normalization versus seawater concentrations) demonstrates that these elements show remarkably constant proportions vis à vis each other. Thus, Ti, Fe, Al, Mn, V, and Zr occur in marine lower organisms in the same proportions as in the average shale, whereas Ba, Cr, Cu, Ni, Cd, Pb, Zn and B are enriched relative to the shale abundances, as are also Ca, Mg, Na, K, and Sr. These patterns appear to suggest that marine plankton are rich in lithogenic matter, but this is probably not the normal case.Contrary to the uniformity of plankton, sediments from the Pacific vary considerably in composition. Under the Equatorial high-productivity region the sediments show striking similarities with a mixture of average shale and average plankton mass, as could be expected, whereas sediments from the East Pacific Rise differ considerably from such mixtures. An iron—manganese phase (of deep-seated origin?), mixed with biological matter, on the other hand, yields model sediments with remarkable similarities to the East Pacific Rise deposits. It is therefore likely that biological processes account for a considerable fraction of some elements such as Cu, Ni, Zn and Ba also in the East Pacific Rise metalliferous sediments.     

Geochemistry of ferromanganese nodules in the Gulf of Finland, Baltic Sea

Distribution of the major and trace elements in ferromanganese nodules, which are buried or exposed on the seafloor, and in host sediments was studied in ten concretion/sediment pairs by various physical and chemical methods. It has been established that, in addition to Fe and Mn, a limited number of the major and trace elements (P, Ca, Sr, Ba, Mo, Co, Zn, Ni, As, Pb, Sb, Tl, U, W, Y, and Ga included) is accumulated with a variable degree of intensity (relative to sediments) in the concretions. As compared to host sediments, the maximal content of Mn in concretions is 100 times higher, whereas maximal contents of all other elements listed above vary from more than one to 10–20 times. Manganese and, to a lesser extent, Ba and Sr are concentrated in the buried concretions. Other elements are primarily concentrated in concretions exposed on the sea-floor. The occurrence mode of concretions and compositional data on interstitial water suggest that metals in the concretions were derived from seawater and suspended particulates, in addition to sediments. Burial of concretions in the sediment pile is accompanied by the alteration of their composition, accumulation of Mn (relative to Fe), and loss of several associated metals.