An approach for evaluating the hydrological effects of urbanization and its application

This study focuses mainly on observing urban development in Taiwan's Wu‐Tu watershed from the perspective of urban hydrological theory. An approach is proposed for developing a method for incorporating available meteorological data to define the degree of change in a runoff hydrograph for urbanizing basins. The mean rainfall was estimated using the Kriging method. For calibration, two methods of calculating the effective rainfall (the Φ‐index method and the non‐linear‐programming (NLP) method) were used as model inputs, and the optimal global parameters of the linear reservoir model were then obtained from the shuffled complex evolution (SCE) algorithm. Twenty‐six (1966–1991) and eight (1994–1997) rainfall–runoff events were used for calibration and verification, respectively. The NLP method yielded better results than the Φ‐index method, especially for multipeak rainfall–runoff events. The regression equation determined the relationship between the parameters of the model and impervious areas. A comparison based on the results of the instantaneous unit hydrograph of the study area revealed that three decades of urbanization had increased the peak flow by 27%, and the time to peak was decreased by 4 h. The study simply describes the results of the impact of imperviousness on hydrological modelling. Copyright © 2002 John Wiley & Sons, Ltd.     

Development of a thresholds approach for real‐time flash flood prediction in complex geomorphological river basins

Flash floods represent one of the deadliest and costliest natural disasters worldwide. The hydrological analysis of a flash flood event contributes in the understanding of the runoff creation process. This study presents the analysis of some flash flood events that took place in a complex geomorphological Mediterranean River basin. The objective of the present work is to develop the thresholds for a real‐time flash flood forecasting model in a complex geomorphological watershed, based on high‐frequency data from strategically located hydrological and meteorological telemetric stations. These stations provide hourly real‐time data which were used to determine hydrological and meteorological parameters. The main characteristics of various hydrographs specified in this study were the runoff coefficients, lag time, time to peak, and the maximum potential retention. The estimation of these hydrometeorological parameters provides the necessary information in order to successfully manage flash floods events. Especially, the time to peak is the most significant hydrological parameter that affects the response time of an oncoming flash flood event. A study of the above parameters is essential for the specification of thresholds which are related to the geomorphological characteristics of the river basin, the rainfall accumulation of an event, the rainfall intensity, the threshold runoff through karstic area, the season during which the rainfall takes place and the time intervals between the rainstorms that affect the soil moisture conditions. All these factors are combined into a real‐time‐threshold flash flood prediction model. Historical flash flood events at the downstream are also used for the validation of the model. An application of the proposed model is presented for the Koiliaris River basin in Crete, Greece. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydrograph and unit hydrograph derivation in arid regions

Arid and semi‐arid regions expose special hydrological features that are distinctive from humid areas. Unfortunately, humid‐region hydrological empirical formulations are used directly in the arid and semi‐arid regions without care about the basic assumptions. During any storm rainfall in arid regions, rainfall, infiltration and runoff components of the hydrological cycle have impacts on water resources. The basis of the methodology presented in this paper is the ratio of runoff increment to rainfall increment during an infinitesimally small time duration. This is the definition of runoff coefficient for the same infinitesimal time duration. The ratio is obtained through rational, physical and mathematical combination of hydrological thinking and then integrated with the classical infiltration equation for the hydrograph determination. The parameters of the methodology are explained and their empirical estimations are presented. The methodology works for rainfall and runoff from ungauged watersheds where infiltration measurement can be performed. The comparison of the new approach with different classical approaches, such as the rational formula and Soil Conservation Service method, are presented in detail. Its application is performed for two wadis within the Kingdom of Saudi Arabia. Copyright © 2006 John Wiley & Sons, Ltd.     

A watershed rainfall data recovery approach with application to distributed hydrological models

Watershed areal rainfall estimation, which is one of the most important and fundamental aspects in hydrological forecasting and various kinds of catchment‐scale hydrological models, is widely used in the analysis of hydrological regime change, and its precision has a direct influence on the accuracy of hydrological forecasting and hydrological simulation. In China, it is difficult to obtain the watershed areal rainfall estimate with reliable precision and avoid the phenomenon of ‘the same effect of different parameters’ because of the low density of the rain gauge network. Therefore, a watershed rainfall data recovery approach of improving the precision of watershed areal rainfall estimation is proposed here. This approach is to build new observatories, establish the time–space relations of rainfall between newly built observatories and previously built observatories in a relatively short interval and then recover the rainfall data of newly built observatories prior to their construction through simulating the relations over a longer time. As a result, watershed rainfall information could be elaborated to improve the precision of watershed areal rainfall estimate and avoid the phenomenon of ‘the same effect of different parameters’ to a certain degree in the process of hydrological simulation. The approach is used in the hydrological simulation of Hali River catchment. In combination with the Soil Water Assessment Tool model, a better result can be obtained in the hydrological simulation. Therefore, the approach can be used in other similar catchments. Copyright © 2011 John Wiley & Sons, Ltd.     

A wavelet based approach for combining the outputs of different rainfall–runoff models

The rainfall–runoff modelling being a stochastic process in nature is dependent on various climatological variables and catchment characteristics and therefore numerous hydrological models have been developed to simulate this complex process. One approach to modelling this complex non-linear rainfall–runoff process is to combine the outputs of various models to get more accurate and reliable results. This multi-model combination approach relies on the fact that various models capture different features of the data, and hence combination of these features would yield better result. This study for the first time presented a novel wavelet based combination approach for estimating combined runoff The simulated daily output (Runoff) of five selected conventional rainfall–runoff models from seven different catchments located in different parts of the world was used in current study for estimating combined runoff for each time period. Five selected rainfall–runoff models used in this study included four data driven models, namely, the simple linear model, the linear perturbation model, the linearly varying variable gain factor model, the constrained linear systems with a single threshold and one conceptual model, namely, the soil moisture accounting and routing model. The multilayer perceptron neural network method was used to develop combined wavelet coupled models to evaluate the effect of wavelet transformation (WT). The performance of the developed wavelet coupled combination models was compared with their counterpart simple combination models developed without WT. It was concluded that the presented wavelet coupled combination approach outperformed the existing approaches of combining different models without applying input WT. The study also recommended that different models in a combination approach should be selected on the basis of their individual performance.     

Application and evaluation of a snowmelt runoff model in the Tamor River basin,Eastern Himalaya using a Markov Chain Monte Carlo (MCMC) data assimilation approach

Previous studies have drawn attention to substantial hydrological changes taking place in mountainous watersheds where hydrology is dominated by cryospheric processes. Modelling is an important tool for understanding these changes but is particularly challenging in mountainous terrain owing to scarcity of ground observations and uncertainty of model parameters across space and time. This study utilizes a Markov Chain Monte Carlo data assimilation approach to examine and evaluate the performance of a conceptual, degree‐day snowmelt runoff model applied in the Tamor River basin in the eastern Nepalese Himalaya. The snowmelt runoff model is calibrated using daily streamflow from 2002 to 2006 with fairly high accuracy (average Nash–Sutcliffe metric ~0.84, annual volume bias < 3%). The Markov Chain Monte Carlo approach constrains the parameters to which the model is most sensitive (e.g. lapse rate and recession coefficient) and maximizes model fit and performance. Model simulated streamflow using an interpolated precipitation data set decreases the fractional contribution from rainfall compared with simulations using observed station precipitation. The average snowmelt contribution to total runoff in the Tamor River basin for the 2002–2006 period is estimated to be 29.7 ± 2.9% (which includes 4.2 ± 0.9% from snowfall that promptly melts), whereas 70.3 ± 2.6% is attributed to contributions from rainfall. On average, the elevation zone in the 4000–5500 m range contributes the most to basin runoff, averaging 56.9 ± 3.6% of all snowmelt input and 28.9 ± 1.1% of all rainfall input to runoff. Model simulated streamflow using an interpolated precipitation data set decreases the fractional contribution from rainfall versus snowmelt compared with simulations using observed station precipitation. Model experiments indicate that the hydrograph itself does not constrain estimates of snowmelt versus rainfall contributions to total outflow but that this derives from the degree‐day melting model. Lastly, we demonstrate that the data assimilation approach is useful for quantifying and reducing uncertainty related to model parameters and thus provides uncertainty bounds on snowmelt and rainfall contributions in such mountainous watersheds. Copyright © 2013 John Wiley & Sons, Ltd.     

Study of discontinuities in hydrological data using catastrophe theory

Abstract

Modelling and prediction of hydrological processes (e.g. rainfall–runoff) can be influenced by discontinuities in observed data, and one particular case may arise when the time scale (i.e. resolution) is coarse (e.g. monthly). This study investigates the application of catastrophe theory to examine its suitability to identify possible discontinuities in the rainfall–runoff process. A stochastic cusp catastrophe model is used to study possible discontinuities in the monthly rainfall–runoff process at the Aji River basin in Azerbaijan, Iran. Monthly-averaged rainfall and flow data observed over a period of 20 years (1981–2000) are analysed using the Cuspfit program. In this model, rainfall serves as a control variable and runoff as a behavioural variable. The performance of this model is evaluated using four measures: correlation coefficient, log-likelihood, Akaike information criterion (AIC) and Bayesian information criterion (BIC). The results indicate the presence of discontinuities in the rainfall–runoff process, with a significant sudden jump in flow (cusp signal) when rainfall reaches a threshold value. The performance of the model is also found to be better than that of linear and logistic models. The present results, though preliminary, are promising in the sense that catastrophe theory can play a possible role in the study of hydrological systems and processes, especially when the data are noisy.

Citation Ghorbani, M. A., Khatibi, R., Sivakumar, B. & Cobb, L. (2010) Study of discontinuities in hydrological data using catastrophe theory. Hydrol. Sci. J. 55(7), 1137–1151.     

Design hydrograph estimation in small and ungauged watersheds: continuous simulation method versus event‐based approach

The proper assessment of design hydrographs and their main properties (peak, volume and duration) in small and ungauged basins is a key point of many hydrological applications. In general, two types of methods can be used to evaluate the design hydrograph: one approach is based on the statistics of storm events, while the other relies on continuously simulating rainfall‐runoff time series. In the first class of methods, the design hydrograph is obtained by applying a rainfall‐runoff model to a design hyetograph that synthesises the storm event. In the second approach, the design hydrograph is quantified by analysing long synthetic runoff time series that are obtained by transforming synthetic rainfall sequences through a rainfall‐runoff model. These simulation‐based procedures overcome some of the unrealistic hypotheses which characterize the event‐based approaches. In this paper, a simulation experiment is carried out to examine the differences between the two types of methods in terms of the design hydrograph's peak, volume and duration. The results conclude that the continuous simulation methods are preferable because the event‐based approaches tend to underestimate the hydrograph's volume and duration. Copyright © 2011 John Wiley & Sons, Ltd.     

Using land cover changes and demographic data to improve hydrological modeling in the Sahel

At the beginning of the drought in the Sahel in the 1970s and 1980s, rainfall decreased markedly, but runoff coefficients and in some cases, absolute runoff increased. This situation was due to the conversion of the land cover from natural vegetation with a low annual runoff coefficient, to cropland and bare soils, whose runoff coefficients are higher. Unless they are adapted, hydrological conceptual models, such as GR2M, are unable to reproduce this increase in runoff. Despite the varying environmental and climatic conditions of the West African Sahel, we show that it is possible to increase the performance of the GR2M model simulations by elaborating a time‐varying soil water holding capacity and to incorporate this value in the annual maximum amount of water to be stored in reservoir A of the model. We looked for interactions between climate, rural society, and the environment. These interactions drive land‐cover changes in the Sahel, which in turn drive the distribution of rainfall between infiltration, evaporation, and runoff and hence the water resources, which are vital in this region. We elaborated several time series of key indicators linked to these interactions. We then integrated these changes in the runoff conditions of the GR2M model through the maximum value of the reservoir capacity. We calculated annual values of water holding capacity using the annual values of four classes of land cover, natural vegetation, cultivated area, bare soil, and surface water. We then used the hydrological model with and without this time‐varying soil value of A and compared the performances of the model under the two scenarios. Whatever the calibration period used, the Nash–Sutcliffe index was always greater in the case of the time‐varying A time series.     

LAND-USE IMPACT ON WATERSHED RESPONSE: THE INTEGRATION OF TWO-DIMENSIONAL HYDROLOGICAL MODELLING AND GEOGRAPHICAL INFORMATION SYSTEMS

The integration of a two-dimensional, raster-based rainfall–runoff model, CASC2D, with a raster geographical information system (GIS), GRASS, offers enhanced capabilities for analysing the hydrological impact under a variety of land management scenarios. The spatially varied components of the watershed, such as slope, soil texture, surface roughness and land-use disturbance, were characterized in GRASS at a user-specified grid cell resolution for input into the CASC2D model. CASC2D is a raster-based, single-event rainfall–runoff model that divides the watershed into grid cell elements and simulates the hydrological processes of infiltration, overland flow and channel flow in response to distributed rainfall precipitation. The five-step integration of CASC2D and GRASS demonstrates the potential for analysing spatially and temporally varied hydrological processes within a 50 square mile semi-arid watershed. By defining possible land-use disturbance scenarios for the watershed, a variety of rainfall–runoff events were simulated to determine the changes in watershed response under varying disturbance and rainfall conditions. Additionally, spatially distributed infiltration outputs derived from the simulations were analysed in GRASS to determine the variability of hydrological change within the watershed. Grid cell computational capabilities in GRASS allow the user to combine the scenario simulation outputs with other distributed watershed parameters to develop complex maps depicting potential areas of hydrological sensitivity. This GIS–hydrological model integration provides valuable spatial information to researchers and managers concerned with the study and effects of land-use on hydrological response.     

Geostatistical interpolation of space–time rainfall on Tamshui River basin,Taiwan

Taiwan suffers from heavy storm rainfall during the typhoon season. This usually causes large river runoff, overland flow, erosion, landslides, debris flows, loss of power, etc. In order to evaluate storm impacts on the downstream basin, a real‐time hydrological modelling is used to estimate potential hazard areas. This can be used as a decision‐support system for the Emergency Response Center, National Fire Agency Ministry, to make ‘real‐time’ responses and minimize possible damage to human life and property. This study used 34 observed events from 14 telemetered rain‐gauges in the Tamshui River basin, Taiwan, to study the spatial–temporal characteristics of typhoon rainfall. In the study, regionalized theory and cross‐semi‐variograms were used to identify the spatial‐temporal structure of typhoon rainfall. The power form and parameters of the cross‐semi‐variogram were derived through analysis of the observed data. In the end, cross‐validation was used to evaluate the performance of the interpolated rainfall on the river basin. The results show the derived rainfall interpolator represents the observed events well, which indicates the rainfall interpolator can be used as a spatial‐temporal rainfall input for real‐time hydrological modelling. Copyright © 2007 John Wiley & Sons, Ltd.     

Modelling stream flow for use in ecological studies in a large,arid zone river,central Australia

Australian arid zone ephemeral rivers are typically unregulated and maintain a high level of biodiversity and ecological health. Understanding the ecosystem functions of these rivers requires an understanding of their hydrology. These rivers are typified by highly variable hydrological regimes and a paucity, often a complete absence, of hydrological data to describe these flow regimes. A daily time‐step, grid‐based, conceptual rainfall–runoff model was developed for the previously uninstrumented Neales River in the arid zone of northern South Australia. Hourly, logged stage data provided a record of stream‐flow events in the river system. In conjunction with opportunistic gaugings of stream‐flow events, these data were used in the calibration of the model. The poorly constrained spatial variability of rainfall distribution and catchment characteristics (e.g. storage depths) limited the accuracy of the model in replicating the absolute magnitudes and volumes of stream‐flow events. In particular, small but ecologically important flow events were poorly modelled. Model performance was improved by the application of catchment‐wide processes replicating quick runoff from high intensity rainfall and improving the area inundated versus discharge relationship in the channel sections of the model. Representing areas of high and low soil moisture storage depths in the hillslope areas of the catchment also improved the model performance. The need for some explicit representation of the spatial variability of catchment characteristics (e.g. channel/floodplain, low storage hillslope and high storage hillslope) to effectively model the range of stream‐flow events makes the development of relatively complex rainfall–runoff models necessary for multisite ecological studies in large, ungauged arid zone catchments. Grid‐based conceptual models provide a good balance between providing the capacity to easily define land types with differing rainfall–runoff responses, flexibility in defining data output points and a parsimonious water‐balance–routing model. Copyright © 2004 John Wiley & Sons, Ltd.     

A distributed monthly hydrological model for integrating spatial variations of basin topography and rainfall

Hydrological models at a monthly time‐scale are important tools for hydrological analysis, such as in impact assessment of climate change and regional water resources planning. Traditionally, monthly models adopt a conceptual, lumped‐parameter approach and cannot account for spatial variations of basin characteristics and climatic inputs. A large requirement for data often severely limits the utility of physically based, distributed‐parameter models. Based on the variable‐source‐area concept, we considered basin topography and rainfall to be two major factors whose spatial variations play a dominant role in runoff generation and developed a monthly model that is able to account for their influences in the spatial and temporal dynamics of water balance. As a hybrid of the Xinanjiang model and TOPMODEL, the new model is constructed by innovatively making use of the highly acclaimed simulation techniques in the two existing models. A major contribution of this model development study is to adopt the technique of implicit representation of soil moisture characteristics in the Xinanjiang model and use the TOPMODEL concept to integrate terrain variations into runoff simulation. Specifically, the TOPMODEL topographic index ln(a/tanβ) is converted into an index of relative difficulty in runoff generation (IRDG) and then the cumulative frequency distribution of IRDG is used to substitute the parabolic curve, which represents the spatial variation of soil storage capacity in the Xinanjiang model. Digital elevation model data play a key role in the modelling procedures on a geographical information system platform, including basin segmentation, estimation of rainfall for each sub‐basin and computation of terrain characteristics. Other monthly data for model calibration and validation are rainfall, pan evaporation and runoff. The new model has only three parameters to be estimated, i.e. watershed‐average field capacity WM, pan coefficient η and runoff generation coefficient α. Sensitivity analysis demonstrates that runoff is least sensitive to WM and, therefore, it can be determined by a prior estimation based on the climate and soil properties of the study basin. The other two parameters can be determined using optimization methods. Model testing was carried out in a number of nested sub‐basins of two watersheds (Yuanjiang River and Dongjiang River) in the humid region in central and southern China. Simulation results show that the model is capable of describing spatial and temporal variations of water balance components, including soil moisture content, evapotranspiration and runoff, over the watershed. With a minimal requirement for input data and parameterization, this terrain‐based distributed model is a valuable contribution to the ever‐advancing technology of hydrological modelling. Copyright © 2006 John Wiley & Sons, Ltd.     

Multi‐criterial validation of TOPMODEL in a mountainous catchment

The need for powerful validation methods for hydrological models including the evaluation of internal stages and spatially distributed simulations has often been emphasized. In this study a multi‐criterial validation scheme was used for validation of TOPMODEL, a conceptual semi‐distributed rainfall–runoff model. The objective was to test TOPMODEL's capability of adequately representing dominant hydrological processes by simple conceptual approaches. Validation methods differed in the type of data used, in their target and in mode. The model was applied in the humid and mountainous Brugga catchment (40 km²) in south‐west Germany. It was calibrated by a Monte Carlo method based on hourly runoff data. Additional information for validation was derived from a recession analysis, hydrograph separation with environmental tracers and from field surveys, including the mapping of saturated areas. Although runoff simulations were satisfying, inadequacies of the model structure compared with the real situation with regard to hydrological processes in the study area were found. These belong mainly to the concept of variable contributing areas for saturation excess overland flow and their dynamics, which were overestimated by the model. The simple TOPMODEL approach of two flow components was found to be insufficient. The multi‐criterial validation scheme enables not only to demonstrate limitations with regard to process representation, but also to specify where and why these limitations occur. It may serve as a valuable tool for the development of physically sound model modifications. Copyright © 1999 John Wiley & Sons, Ltd.     

A comparative fuzzy logic approach to runoff coefficient and runoff estimation

In practice, rainfall–runoff relationships are achieved through a simply defined runoff coefficient concept that is widely used in many engineering hydrological designs in urban and rural areas. The simplicity of the method, with the sole requirement of runoff coefficient assessment, is the main attractiveness, in addition to its successful prediction of average runoff rates for a given rainfall record. Unfortunately, in the classical regression approach of the rainfall–runoff relationship, internal variabilities are not taken into consideration explicitly. The runoff coefficient is considered a constant value, and it is used without distinction of antecedent conditions for the calculation of runoff from the rainfall record. In this paper, various other uncertainty embedded versions of the runoff coefficient, and hence rainfall–runoff formulation, are presented in terms of statistics, probability, perturbation and, finally, fuzzy system modelling. It is concluded that the fuzzy logic approach yields the least relative error among the various alternative runoff calculation methods; therefore, it is recommended for use in future studies. The application of various alternatives is presented for two monthly rainfall‐runoff records around Istanbul, Turkey. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of climate change on overland flow generation: a case study in central Germany

The impact of global climate change on runoff components, especially on the type of overland flow, is of utmost significance. High‐resolution temporal rainfall plays an important role in determining the hydrological response of quick runoff components. However, hydrological climate change scenario analyses with high temporal resolution are rare. This study investigates the impact of climate change on discharge peak events generated by rainfall, snowmelt, and soil‐frost induced runoff using high‐resolution hydrological modelling. The study area is Schäfertal catchment (1.44 km²) in the lower Harz Mountains in central Germany. The WaSiM‐ETH hydrological model is used to investigate the rainfall response of runoff components under near future (2021–2050) and far‐distant future (2071–2100) climatic conditions. Disaggregated daily climate variables of WETTREG2010 SRES scenario A1B are used on a temporal resolution of 10 min. Hydrological model parameter optimization and uncertainty analysis was conducted using the Differential Evolution Adaptive Metropolis (DREAM_(ZS)) uncertainty tool. The scenario results show that total runoff and interflow will increase by 3.8% and 3.5% in the near future and decrease by 32.85% and 31% in the far‐distant future compared to the baseline scenario. In contrast, overland flow and the number and size of peak runoff will decrease moderately for the near future and drastically for the far‐distant future compared to the baseline scenario. We found the strongest decrease for soil‐frost induced discharge peaks at 79.6% in the near future and at 98.2% in the far‐distant future scenario. It can be concluded that high‐resolution hydrological modelling can provide detailed predictions of future hydrological regimes and discharge peak events of the catchment. Copyright © 2014 John Wiley & Sons, Ltd.     

Assessment of flooding in urbanized ungauged basins: a case study in the Upper Tiber area,Italy

The reliability of a procedure for investigation of flooding into an ungauged river reach close to an urban area is investigated. The approach is based on the application of a semi‐distributed rainfall–runoff model for a gauged basin, including the flood‐prone area, and that furnishes the inlet flow conditions for a two‐dimensional hydraulic model, whose computational domain is the urban area. The flood event, which occurred in October 1998 in the Upper Tiber river basin and caused significant damage in the town of Pieve S. Stefano, was used to test the approach. The built‐up area, often inundated, is included in the gauged basin of the Montedoglio dam (275 km²), for which the rainfall–runoff model was adapted and calibrated through three flood events without over‐bank flow. With the selected set of parameters, the hydrological model was found reasonably accurate in simulating the discharge hydrograph of the three events, whereas the flood event of October 1998 was simulated poorly, with an error in peak discharge and time to peak of −58% and 20%, respectively. This discrepancy was ascribed to the combined effect of the rainfall spatial variability and a partial obstruction of the bridge located in Pieve S. Stefano. In fact, taking account of the last hypothesis, the hydraulic model reproduced with a fair accuracy the observed flooded urban area. Moreover, incorporating into the hydrological model the flow resulting from a sudden cleaning of the obstruction, which was simulated by a ‘shock‐capturing’ one‐dimensional hydraulic model, the discharge hydrograph at the basin outlet was well represented if the rainfall was supposed to have occurred in the region near the main channel. This was simulated by reducing considerably the dynamic parameter, the lag time, of the instantaneous unit hydrograph for each homogeneous element into which the basin is divided. The error in peak discharge and time to peak decreased by a few percent. A sensitivity analysis of both the flooding volume involved in the shock wave and the lag time showed that this latter parameter requires a careful evaluation. Moreover, the analysis of the hydrograph peak prediction due to error in rainfall input showed that the error in peak discharge was lower than that of the same input error quantity. Therefore, the obtained results allowed us to support the hypothesis on the causes which triggered the complex event occurring in October 1998, and pointed out that the proposed procedure can be conveniently adopted for flood risk evaluation in ungauged river basins where a built‐up area is located. The need for a more detailed analysis regarding the processes of runoff generation and flood routing is also highlighted. Copyright © 2005 John Wiley & Sons, Ltd.     

The effect of differences between rainfall measurement techniques on groundwater and discharge simulations in a lowland catchment

Several rainfall measurement techniques are available for hydrological applications, each with its own spatial and temporal resolution and errors. When using these rainfall datasets as input for hydrological models, their errors and uncertainties propagate through the hydrological system. The aim of this study is to investigate the effect of differences between rainfall measurement techniques on groundwater and discharge simulations in a lowland catchment, the 6.5‐km² Hupsel Brook experimental catchment. We used five distinct rainfall data sources: two automatic raingauges (one in the catchment and another one 30 km away), operational (real‐time and unadjusted) and gauge‐adjusted ground‐based C‐band weather radar datasets and finally a novel source of rainfall information for hydrological purposes, namely, microwave link data from a cellular telecommunication network. We used these data as input for the, a recently developed rainfall‐runoff model for lowland catchments, and intercompared the five simulated discharges time series and groundwater time series for a heavy rainfall event and a full year. Three types of rainfall errors were found to play an important role in the hydrological simulations, namely: (1) Biases, found in the unadjusted radar dataset, are amplified when propagated through the hydrological system; (2) Timing errors, found in the nearest automatic raingauge outside the catchment, are attenuated when propagated through the hydrological system; (3) Seasonally varying errors, found in the microwave link data, affect the dynamics of the simulated catchment water balance. We conclude that the hydrological potential of novel rainfall observation techniques should be assessed over a long period, preferably a full year or longer, rather than on an event basis, as is often done. Copyright © 2016 The Authors. Hydrological Processes. Published by John Wiley & Sons Ltd.     

Green‐Ampt Curve‐Number mixed procedure as an empirical tool for rainfall–runoff modelling in small and ungauged basins

The Soil Conservation Service Curve Number (SCS‐CN) method is a popular rainfall–runoff model that is widely used to estimate direct runoff from small and ungauged basins. The SCS‐CN is a simple and valuable approach to quantify the total streamflow volume generated by storm rainfall, but its use is not appropriate for estimating the sub‐daily incremental rainfall excess. To overcome this drawback, we propose to include the Green‐Ampt (GA) infiltration model into a mixed procedure, which is referred to as Curve Number for Green‐Ampt (CN4GA), aiming to distribute in time the information provided by the SCS‐CN method. For a given storm, the computed SCS‐CN total net rainfall amount is employed to calibrate the soil hydraulic conductivity parameter of the GA model. The proposed procedure is evaluated by analysing 100 rainfall–runoff events that were observed in four small catchments of varying size. CN4GA appears to provide encouraging results for predicting the net rainfall peak and duration values and has shown, at least for the test cases considered in this study, better agreement with the observed hydrographs than the classic SCS‐CN method. Copyright © 2012 John Wiley & Sons, Ltd.