Organic pollutants in microplastics from two beaches of the Portuguese coast

Microplastics pose a threat to coastal environments due to their capacity to adsorb persistent organic pollutants (POPs). These particles (less than 5 mm in size) are potentially dangerous to marine species due to magnification risk over the food chain. Samples were collected from two Portuguese beaches and sorted in four classes to relate the adsorption capacity of pollutants with color and age. Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and DDTs were analysed on pellets through gas chromatography mass spectrometry (GC-MS), and types of plastic were identified using Fourier transformed infra-red spectroscopy (micro-FTIR). Microplastics were mostly polyethylene and polypropylene. Regarding sizes, some fibres ranged from 1 to 5 μm in diameter and were 500 μm in length. The majority of samples collected had sizes above 200 μm. Black pellets, unlike aged pellets, had the highest concentrations of POPs except for PAHs in Fonte da Telha beach. PAHs with higher concentrations were pyrene, phenantrene, chrysene and fluoranthene. Higher concentrations of PCBs were found for congeners 18, 31, 138 and 187. Further investigation is necessary to understand the relationship between plastic degradation and adsorption for different pollutants.     

Microplastics as contaminants in the marine environment: a review

Since the mass production of plastics began in the 1940s, microplastic contamination of the marine environment has been a growing problem. Here, a review of the literature has been conducted with the following objectives: (1) to summarise the properties, nomenclature and sources of microplastics; (2) to discuss the routes by which microplastics enter the marine environment; (3) to evaluate the methods by which microplastics are detected in the marine environment; (4) to assess spatial and temporal trends of microplastic abundance; and (5) to discuss the environmental impact of microplastics. Microplastics are both abundant and widespread within the marine environment, found in their highest concentrations along coastlines and within mid-ocean gyres. Ingestion of microplastics has been demonstrated in a range of marine organisms, a process which may facilitate the transfer of chemical additives or hydrophobic waterborne pollutants to biota. We conclude by highlighting key future research areas for scientists and policymakers.     

A standardized method for sampling and extraction methods for quantifying microplastics in beach sand

Microplastics are ubiquitous in the environment, are frequently ingested by organisms, and may potentially cause harm. A range of studies have found significant levels of microplastics in beach sand. However, there is a considerable amount of methodological variability among these studies. Methodological variation currently limits comparisons as there is no standard procedure for sampling or extraction of microplastics. We identify key sampling and extraction procedures across the literature through a detailed review. We find that sampling depth, sampling location, number of repeat extractions, and settling times are the critical parameters of variation. Next, using a case-study we determine whether and to what extent these differences impact study outcomes. By investigating the common practices identified in the literature with the case-study, we provide a standard operating procedure for sampling and extracting microplastics from beach sand.     

A review of pollutants in the sea-surface microlayer (SML): a unique habitat for marine organisms

Boundary layers between different environmental compartments represent critical interfaces for biological, chemical and physical processes. The sea-surface microlayer (uppermost 1-1000 microm layer) forms the boundary layer interface between the atmosphere and ocean. Environmental processes are controlled by the SML, and it is known to play a key role in the global distribution of anthropogenic pollutants. Due to its unique chemical composition, the upper organic film of the SML represents both a sink and a source for a range of pollutants including chlorinated hydrocarbons, organotin compounds, petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAH) and heavy metals. These pollutants can be enriched in the SML by up to 500 times relative to concentrations occurring in the underlying bulk water column. The SML is also a unique ecosystem, serving as an important habitat for fish eggs and larvae. Concentration ranges and enrichment factors of pollutants in the SML in different areas of the world's oceans have been critically reviewed, together with available toxicity data for marine biota found within the SML. Overall, the SML is highly contaminated in many urban and industrialized areas of the world, resulting in severe ecotoxicological impacts. Such impacts may lead to drastic effects on the marine food web and to fishery recruitment in coastal waters. Studies of the toxicity of fish eggs and larvae exposed to the SML contaminants have shown that the SML in polluted areas leads to significantly higher rates of mortality and abnormality of fish embryos and larvae.     

Large microplastic particles in sediments of tributaries of the River Thames,UK – Abundance,sources and methods for effective quantification

Sewage effluent input and population were chosen as predictors of microplastic presence in sediments at four sites in the River Thames basin (UK). Large microplastic particles (1 mm–4 mm) were extracted using a stepwise approach to include visual extraction, flotation and identification using Raman spectroscopy. Microplastics were found at all four sites. One site had significantly higher numbers of microplastics than other sites, average 66 particles 100 g^? 1, 91% of which were fragments. This site was downstream of a storm drain outfall receiving urban runoff; many of the fragments at this site were determined to be derived of thermoplastic road-surface marking paints. At the remaining three sites, fibres were the dominant particle type. The most common polymers identified included polypropylene, polyester and polyarylsulphone. This study describes two major new findings: presence of microplastic particles in a UK freshwater system and identification of road marking paints as a source of microplastics.

Clastic sedimentary features of beachrocks and their palaeo-environmental significance:comparison of past and modern coastal regimes

Clastic sedimentary features of beachrocks and unconsolidated deposits of parent beaches were investigated along the northern Aegean coastline（Greece） to assess their suitability in palaeo-environmental reconstruction.Twelve paired datasets were collected in the Thermaikos,Toroneos,Siggitikos and lerissos gulfs of the Chalkidiki Peninsula,the adjoining Kavala Gulf and Thassos Island,comprising beachrock cores and companion beach subsurface sediments.Particle size analyses based on univariate and bivariate statistics suggest that,during the time period of beachrock formation,depositional conditions differed distinctly from those of the modern parent beaches.The results imply difference of maturity level of beach evolution from the time of cementation（coarser materials-early stage of beach formation） to modern situation（finer materials-reworked and ’mature’ beach sediments）.Furthermore,the findings indicate increasing coastal protection due to beachrock exposure in the modern swash zone.In conclusion,it is suggested that textural analysis of beachrocks in comparison with unconsolidated sediments of the parent beach might provide information regarding differences of coastal depositional regimes and future research could focus on specific-layer analysis and comparison.     

Occurrence and distribution of microplastics in marine sediments along the Belgian coast

Plastic debris is known to undergo fragmentation at sea, which leads to the formation of microscopic particles of plastic; the so called ‘microplastics’. Due to their buoyant and persistent properties, these microplastics have the potential to become widely dispersed in the marine environment through hydrodynamic processes and ocean currents. In this study, the occurrence and distribution of microplastics was investigated in Belgian marine sediments from different locations (coastal harbours, beaches and sublittoral areas).Particles were found in large numbers in all samples, showing the wide distribution of microplastics in Belgian coastal waters. The highest concentrations were found in the harbours where total microplastic concentrations of up to 390 particles kg⁻¹ dry sediment were observed, which is 15-50 times higher than reported maximum concentrations of other, similar study areas.The depth profile of sediment cores suggested that microplastic concentrations on the beaches reflect the global plastic production increase.     

鄱阳湖“五河”入湖口沉积物中微塑料污染物的特征及其时空分布

微塑料作为新型环境污染物正日益受到人们密切关注,为探索微塑料在鄱阳湖流域的污染状况,以鄱阳湖流域"五河"入湖口的沉积物为研究对象,分别在3个水文周期（平水期、丰水期和枯水期）选择6个典型区域采集沉积物进行分析.采用浮选分离方法及金相显微鉴定技术,分析鄱阳湖"五河"入湖口沉积物中微塑料的类型、丰度和表面形貌等特征,旨在揭示鄱阳湖沉积物中微塑料的空间分布规律及不同水位期的动态变化.研究结果显示微塑料的类型有碎片类、发泡类、薄膜类和纤维类,其中主要以碎片类微塑料为主,所占百分比为51.95%;70%的微塑料粒径<1 mm,微塑料（<5 mm）的平均丰度为811.11 n/kg,6个样点的微塑料丰度值表现为朱港 > 吴城 > 渡头乡 > 龙口 > 瑞洪镇 > 南矶山.6个样点的微塑料丰度值与鄱阳湖水位动态均具一致性,在枯水期所占比例最高,达到44.41%;平水期次之,达到31.52%;丰水期所占比例最低,仅占24.07%.不同水期、不同样地存在不同程度的微塑料污染问题警示人们要重视塑料垃圾的排放及其污染问题,以减少对湖泊、河流等湿地生态环境的影响.     

鄱阳湖流域饶河龙口入湖段优势淡水鱼类对微塑料及重金属污染物的生物累积

水体生态环境中的微塑料与重金属污染问题正日益受到热切关注为探讨微塑料与重金属对水产品的复合生态效应,选择鄱阳湖饶河段优势淡水鱼为研究对象,对鱼体内微塑料及重金属Cu、Cd、Pb、Zn、Cr等元素的生物累积作用进行分析与评价结果表明:调查区域水环境中微塑料的丰度范围10～64 items/L,平均值38.56 items/L. 8种淡水鱼消化道微塑料丰度范围为1.21～9.11 items/g,平均丰度为5.40 items/g;鳃部丰度范围0.61～5.00 items/g,平均丰度为2.87 items/g;微塑料类型主要有碎片类、纤维类、薄膜类和颗粒类4种,其聚合物成分主要为聚乙烯(PE)、低密度聚乙烯(LDPE)、聚丙烯(PP)和聚苯乙烯(PS);颜色以透明及彩色为主;微塑料粒径范围为0.01～9.5 mm,粒径0.5 mm的微塑料所占比例为79.07%,鱼体内与其生存水环境中微塑料的丰度特征(形态、粒径、颜色和聚合物类型组分比例)具有一定相似性各鱼类对微塑料的累积系数(BAF)平均值为178.29,不同鱼类累积微塑料的能力大小次序为:乌鳢(Channa argus)、黄颡鱼(Pelteobagrus fulvidraco)鲦鱼(Hemicculter leuciclus)、草鱼(Ctenopharyngodon idellus)、鲶鱼(Silurus asotus)鲤鱼(Cyprinus carpio)、刀鱼(Coilia ectenes)、鲫鱼(Carassius auratus)鱼体肌肉组织内重金属Cu、Cd、Pb、Zn、Cr的平均含量分别为4.27、0.13、0.28、11.73、0.53 mg/kg,均符合无公害水产品的要求且低于人体消费卫生标准,属于安全食用范围;鱼类对5种不同重金属的累积能力大小次序为ZnCuCdPbCr,不同鱼类对不同重金属的累积能力具有差异性通过扫描电镜(SEM)与能谱分析(EDS)检测到各类型微塑料表面均有上述5种重金属元素,证实微塑料可能成为重金属的附着载体,相关性分析表明微塑料与Cu呈极显著相关,与Cd、Pb均呈显著相关;微塑料的存在一定程度上会增强Cu、Cd与Pb的累积效应,并可能产生复合污染效应.     

Sediments as sources of DDT and PCB

Despite major decreases in DDT and PCB emissions over a three year period by the dominant discharger to a coastal marine site, only minor (and very similar) decreases were observed in concentrations of these pollutants in bottom sediments and flatfish from the outfall monitoring zone. These results illustrate how persistant such chlorinated hydrocarbons can be in the marine environment once the bottom sediments have been contaminated.     

Assessment of marine debris on the Belgian Continental Shelf

A comprehensive assessment of marine litter in three environmental compartments of Belgian coastal waters was performed. Abundance, weight and composition of marine debris, including microplastics, was assessed by performing beach, sea surface and seafloor monitoring campaigns during two consecutive years. Plastic items were the dominant type of macrodebris recorded: over 95% of debris present in the three sampled marine compartments were plastic. In general, concentrations of macrodebris were quite high. Especially the number of beached debris reached very high levels: on average 6429 ± 6767 items per 100 m were recorded. Microplastic concentrations were determined to assess overall abundance in the different marine compartments of the Belgian Continental Shelf. In terms of weight, macrodebris still dominates the pollution of beaches, but in the water column and in the seafloor microplastics appear to be of higher importance: here, microplastic weight is approximately 100 times and 400 times higher, respectively, than macrodebris weight.     

Chlorinated pesticides and PCBs in the sea-surface microlayer and seawater samples of Singapore

Sea-surface microlayer (SML) and seawater samples collected from Singapore's coastal marine environment were analyzed for selected chlorinated pesticides and polychlorinated biphenyls (PCBs). The SML is a potential site of enrichment of persistent organic pollutants (POPs) compared to the underlying water column. The concentration ranges of SigmaHCH, SigmaDDT and SigmaPCB in subsurface (1 m depth) seawater were 0.4-27.2 ng/l (mean 4.0 ng/l), 0.01-0.6 ng/l (mean 0.1 ng/l) and 0.05-1.8 ng/l (mean 0.5 ng/l) respectively. In the SML, the concentration ranges of SigmaHCH, SigmaDDT and SigmaPCB were 0.6-64.6 ng/l (mean 9.9 ng/l), 0.01-0.7 ng/l (mean 0.2 ng/l) and 0.07-12.4 ng/l (mean 1.3 ng/l) respectively. High spatial and temporal distribution was observed for all POPs measured. However, overall levels measured in the SML were lower than levels reported in the literature for SML samples from temperate coastal regions-possibly due to loss of semi-volatile compounds in the tropical climate of Singapore. Atmospheric wet deposition during the monsoon season may be an important source of POPs to the SML. This study provides the first scientific data on POP concentrations and enrichment factors in the SML for Southeast Asia.     

Do UK coastal and estuarine water samples pose a phototoxic threat?

Many studies have investigated phototoxicity under controlled laboratory conditions, however, few have actually demonstrated it occurring in environmental samples. Here we report on the potential for UK marine coastal waters to demonstrate phototoxicity when tested using the oyster embryo (Crassostrea gigas) bioassay in the presence UV light. Subsurface water, sea surface microlayer samples and subsurface water samples that had been extracted through solid phase extraction (SPE) columns were analysed. Results demonstrated that the majority of samples failed to display any phototoxic potential. However, those collected from Belfast Lough did display an increase in toxicity when bioassays were performed in the presence of UV light when compared to identical samples assayed in the absence of UV light. Analysis of water samples at this location identified known phototoxic PAHs, pyrene and fluoranthene. These findings suggest the need to consider the potential UV light has when determining the toxicity of environmental samples.     

Copper in the sediment and sea surface microlayer near a fallowed, open-net fish farm

Sediment and sea surface microlayer samples near an open-net salmon farm in Nova Scotia, were analysed for copper. Copper is a constituent of the feed and is an active ingredient of anti-foulants. The salmon farm was placed in fallow after 15years of production. Sampling was pursued over 27months. Elevated copper concentrations in the sediments indicated the farm site as a source. Bubble flotation due to gas-emitting sediments from eutrophication is a likely process for accumulating copper in the sea surface microlayer at enriched concentrations. Elevated and enriched concentrations in the sea surface microlayer over distance from the farm site led, as a result of wind-drift, to an enlarged farm footprint. The levels of copper in both sediments and sea surface microlayer exceeded guidelines for protection of marine life. Over the 27months period, copper levels persisted in the sediments and decreased gradually in the sea surface microlayer.     

Evaluation of sampling devices for the determination of polycyclic aromatic hydrocarbons in surface microlayer coastal waters

The sea surface microlayer (SML) may play an important role on the transport and fate of persistent organic pollutants in the marine environment. In order to evaluate the appropriateness of a number of sampling devices for the analysis of 14 parent polycyclic aromatic hydrocarbons (3-5 aromatic rings), marine SML waters were sampled using a glass plate, a rotating drum/roller, a metal screen and a surface slick sampler. The underlying waters were also sampled for the determination of the corresponding enrichment factors (EF = [C](microlayer)/[C](underlying water)). The EFs were phase dependent, ranging from 1 to 3 for the dissolved phase and between 4 and 7 for the particulate phase. In order to better assess the performance of the different sampling methods, in terms of phase partitioning, the truly dissolved and colloidal phases were also estimated. Generally, no significant differences were found for the enrichment factors provided by the different methods, due to the observed large variability in concentrations that can be attributed to small-scale coastal processes. However, the metal screen is recommended as the most efficient sampling method for the study of PAHs taking into account the amount of water collected versus time.     

Boring crustaceans damage polystyrene floats under docks polluting marine waters with microplastic

Boring isopods damage expanded polystyrene floats under docks and, in the process, expel copious numbers of microplastic particles. This paper describes the impacts of boring isopods in aquaculture facilities and docks, quantifies and discusses the implications of these microplastics, and tests if an alternate foam type prevents boring. Floats from aquaculture facilities and docks were heavily damaged by thousands of isopods and their burrows. Multiple sites in Asia, Australia, Panama, and the USA exhibited evidence of isopod damage. One isopod creates thousands of microplastic particles when excavating a burrow; colonies can expel millions of particles. Microplastics similar in size to these particles may facilitate the spread of non-native species or be ingested by organisms causing physical or toxicological harm. Extruded polystyrene inhibited boring, suggesting this foam may prevent damage in the field. These results reveal boring isopods cause widespread damage to docks and are a novel source of microplastic pollution.     

Optically stimulated luminescence dating of a Holocene beach ridge plain in Northern Jutland, Denmark

This study presents results from 20 optically stimulated luminescence (OSL) ages from one of the world's largest beach ridge plains, the Jerup beach ridge plain at the base of the Skagen Spit in the northernmost part of Jutland, Denmark. The OSL ages were obtained using quartz and a SAR protocol, and used to establish a chronology for the beach ridge plain and for the underlying coastal plain. The accuracy of the chronology is tested both by laboratory tests (recuperation, recycling ratio and dose recovery) and by comparison with independent age controls, e.g. previously reported radiocarbon dates, map sources, anecdotal evidence and settlement names. It is concluded that the OSL signals are internally consistent, and that the derived OSL ages are in good agreement with a large range of independent age controls. The ridge plain is shown to cover a time span from 1000 to 2700 years ago; this chronology is more detailed and precise than those previously available, and gives an average beach ridge formation rate of 15 yr/ridge and an average lateral migration rate of 2.0 m/yr. This study adds to the growing knowledge that OSL dating has a large potential for establishing detailed and precise chronologies in coastal marine sediments, including beach ridges.     

Distribution of clay minerals in marine sediments off Chennai,Bay of Bengal,India： Indicators of sediment sources and transport processes

Clay mineralogy, texture size and statistical analyses were carried out on surface sediments from the continental shelf of Chennai, Bay of Bengal, India. The purpose of this study is to characterize the clay mineral distribution and its relation to the hydrodynamics off Chennai to identify the sources and transport pathways of the marine sediments. Characterization of clay minerals in coastal sediments by Fourier Transform Infrared （FTIR） spectroscopy has provided the association of quartz, feldspar, kaolinite, chlorite, illite and iron oxides （magnetite and hematite） derived from river catchments and coastal erosion. Kaolinite, chlorite, illite, iron oxides, and organic matter are the dominant minerals in Cooum, and Adayar region. High quartz and feldspar zones were identified in Marina, which are being confined the sand zone and paralleling the coast. The strong relationships among the wave energy density, sand, quartz and carbonate revealed that wave induced littoral drift system play a dominant role in transportation and deposition of sediments in the Chennai coast. The sediment texture and minerals data are in agreement well with the previous results of hydrodynamics and littoral drift models in this region. Multivariate statistical analyses （correlation, cluster and factor analyses） were carried out and obtained results suggested that clay minerals and organic matter are trapped in silt and clay particles, whereas quartz, feldspar and carbonate are associated with sand particles. Results of sediment sources and transport processes from this study will be useful to predict the fate of the pollutants released from land or the potential change in sediment delivery to coastal areas.     

Detection of anthropogenic Cu, Pb and Zn in continental shelf sediments off Sydney, Australia--a new approach using normalization with cobalt.

Concentrations of Co, Cu, Pb and Zn were determined in 107 surficial sediment samples from the continental margin adjacent to Sydney, Australia. The spatial distributions of trace metals in the sediments and the mud content are similar and increase with greater distance from the coast. In contrast, normalization of the concentrations of Cu, Pb and Zn in the total sediment with Co enables a coastal anthropogenic source to be identified. The spatial distribution of Co-normalized concentrations of Cu, Pb and Zn in total sediment is similar to the distribution of these trace metals in the fine fraction of sediment (<62.5 microm), indicating that Co may be used as a normalizing element for determining contaminant sources in the marine environment near Sydney.