| 粒子加速器中高精度丝线绝对位置测量技术研究 |
| |
| 引用本文： | 梁静,罗明成,王铜,董岚,罗涛,柯志勇,王小龙. 粒子加速器中高精度丝线绝对位置测量技术研究[J]. 测绘通报, 2019, 0(9): 44-50. DOI: 10.13474/j.cnki.11-2246.2019.0283 |
| |
| 作者姓名： | 梁静 罗明成 王铜 董岚 罗涛 柯志勇 王小龙 |
| |
| 作者单位： | 中国科学院高能物理研究所,北京100049;东莞中子科学中心,广东 东莞523803;中国科学院高能物理研究所,北京100049;东莞中子科学中心,广东 东莞523803;中国科学院高能物理研究所,北京100049;东莞中子科学中心,广东 东莞523803;中国科学院高能物理研究所,北京100049;东莞中子科学中心,广东 东莞523803;中国科学院高能物理研究所,北京100049;东莞中子科学中心,广东 东莞523803;中国科学院高能物理研究所,北京100049;东莞中子科学中心,广东 东莞523803;中国科学院高能物理研究所,北京100049;东莞中子科学中心,广东 东莞523803 |
| |
| 基金项目： | 国家自然科学基金（11605216） |
| |
| 摘 要： | 粒子加速器中采用振动线技术进行共架单元上多块磁铁的高精度预准直，需要将振动线代表的磁中心引出进行共架单元之间的相对准直。为了获取以振动线为代表的丝线高精度空间绝对位置，本文对采用近景摄影测量技术进行点、线位置求解的方法进行了研究。利用单相机多站位的方法进行拍摄，通过标定板提供的高精度控制点坐标，采用自标定光束法平差对相机进行标定，并提出将空间直线离散成空间2点进行直线整体精确求解。对标定板上由2点组成的模拟直线进行测量验证，并与标定板提供的理论值进行对比，结果显示空间直线位置获取精度优于5 μm。这表明了本文理论和方法的正确性，为进一步研究丝线高精度空间绝对位置测量打下了基础。
|
| 关 键 词： | 摄影测量 空间直线 标定板 相机标定 光束法平差 |
| 收稿时间： | 2019-01-24 |
Research on the wire absolute position measurement technology of high accuracy in particle accelerator |
| |
| LIANG Jing,LUO Mingcheng,WANG Tong,DONG Lan,LUO Tao,KE Zhiyong,WANG Xiaolong. Research on the wire absolute position measurement technology of high accuracy in particle accelerator[J]. Bulletin of Surveying and Mapping, 2019, 0(9): 44-50. DOI: 10.13474/j.cnki.11-2246.2019.0283 |
| |
| Authors: | LIANG Jing LUO Mingcheng WANG Tong DONG Lan LUO Tao KE Zhiyong WANG Xiaolong |
| |
| Affiliation: | 1. Institute of High Energy Physics, Chinese Academy of Sciences(CAS), Beijing 100049, China;2. Dongguan Neutron Science Center, Dongguan 523803, China |
| |
| Abstract: | The vibration wire technique is recommended for accurate pre-alignment of the magnets on one same unit in particle accelerator. However, the position of vibration wire represented the magnetic center should figure out for the relative alignment between the different units. In order to obtain the absolute position of the wire, the method for getting the points and lines position by the close-range photogrametry technique is studied in this paper. The images are taken on multi-stations by single camera, and the calibration plate used for providing control points is taken to self-calibrate the camera by bundle adjustment method. It also puts forward a way to express the spatial line by two points and this makes the line resolving by bundle adjustment went easier. A test is carried out to measure the position of the line which is simulated by the two points on calibration plate, and the result showes that the accuracy of line position is better than 5 μm as compared with the theoretical values provided by the calibration plate. These confirm the correctness of the theory and method in this paper, and lays a foundation for the wire absolute position measurement with high accuracy. |
| |
| Keywords: | photogrametry spatial line calibration plate camera calibration bundle adjustment |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《测绘通报》浏览原始摘要信息 |
|
点击此处可从《测绘通报》下载全文 |
|
