首页 | 本学科首页   官方微博 | 高级检索  
     

北斗导航定位系统单点定位中的一种定权方法
引用本文:肖国锐,隋立芬,刘长建,吕志平,甘雨,戚国宾. 北斗导航定位系统单点定位中的一种定权方法[J]. 测绘学报, 2014, 43(9): 902-907. DOI: 10.13485/j.cnki.11-2089.2014.0165
作者姓名:肖国锐  隋立芬  刘长建  吕志平  甘雨  戚国宾
作者单位:1. 信息工程大学地理空间信息学院;2. 解放军信息工程大学测绘学院大地系;3. 信息工程大学测绘学院
基金项目:国家自然科学基金,国家863计划
摘    要:北斗卫星导航定位系统星座复杂、不同种类卫星高度差异较大,本文将全局性非线性最小二乘算法(Bancroft算法)应用到北斗单点定位中,Bancroft算法主要依据四维空间下的一种Lorentz内积实现,将Bancroft算法中的Lorentz内积方程写成误差方程形式,推导此方程的权,得到一种新的北斗观测值定权公式。为了验证上述定权方法,基于伪距相位差值(CC组合)组合观测值分析了北斗GEO、IGSO和MEO卫星的测距信号质量,基于多路径(MP组合)组合观测值分析了多路径效应对单点定位的影响。结果表明,新算法提高了北斗单点定位精度。

关 键 词:Bancroft算法  北斗单点定位  定权算法  伪距观测噪声  多路径误差  
收稿时间:2013-12-05
修稿时间:2014-02-07

A Method of Determining the Weight Matrix for BeiDou Navigation Satellite System Single Point Positioning
XIAO Guorui,SUI Lifen,LIU Changjian,LU Zhiping,GAN Yu,QI Guobin. A Method of Determining the Weight Matrix for BeiDou Navigation Satellite System Single Point Positioning[J]. Acta Geodaetica et Cartographica Sinica, 2014, 43(9): 902-907. DOI: 10.13485/j.cnki.11-2089.2014.0165
Authors:XIAO Guorui  SUI Lifen  LIU Changjian  LU Zhiping  GAN Yu  QI Guobin
Affiliation:Institute of Survering and Mapping , Information Engineer University
Abstract:The constellation of BeiDou Navigation Satellite System is composed of Geostationary Earth Orbit (GEO) satellites and Non-Geostationary Earth Orbit (Non-GEO) satellites. In consideration of the huge difference between GEO satellites altitude and Non-GEO satellites altitude, the global nonlinear least squres algorithm(Bancroft algorithm) is applied for BDS single point positioning in this paper. The Bancroft algorithm based on the Lorentz inner product is mainly in four dimensional space. A new algorithm to get the BDS observation weight is introduced by transforming Lorentz inner product into error equation, and then weight of the error equation is deduced. In order to testify the method, a code-minus-phase combination (CC) of BDS measurements is used to determine the code noise of GEO and Non-GEO satellites, a multipath combination (MP) is introduced to extract the multipath of pseudorange and improve the accuracy of single point positioning. The result indicates that new algorithm can improve the accuracy of BDS single point positioning.
Keywords:Bancroft algorithm  BDS single point positioning  weighting algorithm  code noise  multipath error
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《测绘学报》浏览原始摘要信息
点击此处可从《测绘学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号