Multiple longshore sand bars in the upper Chesapeake Bay |
| |
Authors: | Thomas J. Dolan Robert G. Dean |
| |
Affiliation: | Department of Civil Engineering, University of Delaware, Ocean Engineering Program, Newark, Delaware 19711, USA |
| |
Abstract: | In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism. |
| |
Keywords: | sand bars longshore bar Chesapeake Bay Maryland littoral processes coastal geomorphology beach profiles breaking waves |
本文献已被 ScienceDirect 等数据库收录! |
|