首页 | 本学科首页   官方微博 | 高级检索  
     检索      

联合DInSAR与Offset-tracking技术监测高强度采区开采沉陷的方法
引用本文:徐小波,马超,单新建,连达军,屈春燕,白俊武.联合DInSAR与Offset-tracking技术监测高强度采区开采沉陷的方法[J].地球信息科学,2020,22(12):2425-2435.
作者姓名:徐小波  马超  单新建  连达军  屈春燕  白俊武
作者单位:1.苏州科技大学环境科学与工程学院,苏州 2150092.河南理工大学测绘与国土信息工程学院, 焦作 4540033.河南理工大学 自然资源部矿山时空信息与生态修复重点实验室,焦作 4540034.中国地震局地质研究所 地震动力学国家重点实验室,北京 100029
基金项目:国家自然科学基金项目(41701515);国家自然科学基金委员会与神华集团有限责任公司联合基金项目(U1261106);国家自然科学基金委员会与神华集团有限责任公司联合基金项目(U1261206);地震动力学国家重点实验室开放基金(LED2018B04);江苏省自然科学基金(BK20170379)
摘    要:高强度煤炭开采产生巨大的地表形变,形变相位梯度过大导致干涉测量解缠错误,单一采用常规DInSAR及其衍生技术都无法获得地表沉陷主值。本文提出一种新的解决方案,即联合利用DInSAR与偏移量追踪技术(Offset-tracking)各自的技术优势,实现开采区大变形的准确提取,并基于GAUSS函数模型拟合恢复沉陷区剖面形态。基于2012年2月13日和2012年11月27日两景高分辨率SAR数据(RADARSAT-2,5 m精细波束模式(MF5))为数据源,以神东矿区布尔台矿、寸草塔一矿、二矿为研究区,采用常规DInSAR技术获得亚厘米级沉陷区边界,边界沉陷值处于-0.01~ -0.02 m;利用偏移量追踪方法获取米级地表沉陷中心主值,中心沉陷值集中在-1.0~ -4.0 m。将2种方法监测到沉陷信息分段融合,最后采用GAUSS函数模型重构矿区开采沉陷下沉特征曲线。结果表明,偏移量追踪方法可弥补DInSAR技术监测大量级形变信息的不足,联合技术可完整获取高强度采区的大形变沉陷。

关 键 词:布尔台矿  高强度采区  大形变沉陷  DInSAR  偏移量追踪  GAUSS拟合  沉陷特征  Radarsat  
收稿时间:2019-12-02

Monitoring Ground Subsidence in High-intensity Mining Area by Integrating DInSAR and Offset-tracking Technology
XU Xiaobo,MA Chao,SHAN Xinjian,LIAN Dajun,QU Chunyan,BAI Junwu.Monitoring Ground Subsidence in High-intensity Mining Area by Integrating DInSAR and Offset-tracking Technology[J].Geo-information Science,2020,22(12):2425-2435.
Authors:XU Xiaobo  MA Chao  SHAN Xinjian  LIAN Dajun  QU Chunyan  BAI Junwu
Institution:1. School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China2. School of Surveying and Land Information Engineering, Henan Polytechnic University, Jiaozuo 454003, China3. Key Laboratory of Spatio-temporal Information and Ecological Restoration of Mines(MNR), Henan Polytechnic University, Jiaozuo 454003, China4. State Key Laboratory of Earthquake Dynamics, Institute of Geology, China Earthquake Administration, Beijing 100029, China
Abstract:High-intensity underground mining leads to huge surface deformation, and excessive deformation phase gradients could lead to interference unwrapping errors. Currently, the characteristics of surface subsidence cannot be obtained well by conventional DInSAR and its derivative technologies. In this paper, we propose a new method, which combines DInSAR and Offset-tracking technology to extract large-scale deformation accurately, and further restore settlement field shape using the GAUSS function model. We take Bu'ertai Mine, and Cuncaota No.1 and No.2 Mine in Shendong Mining Area as research areas and use the high-resolution RADARSAT-2 data with 5 m fine beam model (MF5) on February 13, 2012 and November 27, 2012 to obtain the mine subsidence boundaries at sub-centimeter level using DInSAR technology and the mine subsidence center at meter level using Offset-tracking method. The boundary subsidence value is -0.01~ -0.02 m and the central subsidence value is -1.0~ -4.0 m. The whole subsidence field is then retrieved by integrating above two results. Finally, the GAUSS function model is used to fit the mining subsidence boundary and central, and to reconstruct the characteristic curve of mining subsidence. Our results demonstrate that the Offset-tracking method could compensate the deficiency of DInSAR in large deformation extraction, and the combination of these two techniques could effectively and accurately extract large-scale subsidence field in mining areas.
Keywords:Bu'ertai mine  high-intensity mining  large scale subsidence  DInSAR  Offset-tracking  GAUSS_fitting  subsidence characteristics  Radarsat  
点击此处可从《地球信息科学》浏览原始摘要信息
点击此处可从《地球信息科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号