圆形标志及其椭圆构像间中心偏差的确定

当目标面与像片平面不平行时，圆形标志的像将为椭圆，椭圆的中心与标志中心的像存在偏差。当标志较大时，此偏差将显著影响求解的精度。揭示了偏差的方向性，导出了求解偏差的方程，给出了偏差的解算步骤

Determination of the Deviation Between the Image of a Circular Target Center and the Center of the Ellipse in the Image

The image of the circular target will appear as an ellipse if the target plane is not parallel to the image plane. There is an offset between the image of circular target center and the center of the ellipse in the image. The offset can be larger than the measurement accuracy of industrial photogrammetric measuring systems if the target is oversized. In general, the influence of the offset can be reduced to a negligible quantity by choosing suitable target size. Nevertheless, the natural target, can not be changed with regard to its size. Therefore, other ways should be found. One of the methods is the rotational transformations of image, i.e. transformations of tilted image to horizontal image. The method is suitable to the case in which all the targets lay in only one plane or several parallel planes. Other one is offset correction method. In order to find out the practical method of the offset correction, the authors researched the case of the offsets distribution. If the offsets of points on the principal line can be determined, the offsets of the other points in the image can be determined. The quadratic equation for computing offset of point on the principal line was derived through the collinearity equations, and the steps of computing offset were given.