Partitioning of Ni2+, Co2+, Fe2+, Mn2+ and Mg2+ between olivine and silicate melts: compositional dependence of partition coefficient

Partitioning of Ni²⁺, Co²⁺, Fe²⁺, Mn²⁺ and Mg²⁺ between olivine and silicate melts has been determined near the join (Mg_0.5·-Fe_0.5)₂SiO₄-K₂O 4SiO₂ and for seven different basaltic compositions. The experiments were made at 1 atm total pressure, 1500-1100°C, and under moderate to reducing oxygen fugacities. The concentration factor, defined as K^MO = (MO)^ol/(MO)^liq (molar ratio), increases markedly for all the cations studied as the olivine component of the liquid decreases. Much of the increase in K^MO is considered as due to the compositional effect of the coexisting liquid: the temperature effect on K^MO is probably opposite to the compositional effect (K^MO decreases as temperature decreases).The partition coefficient K^MO-MgO = (MO/MgO)^ol/(MO/MgO)^liq for the reaction, M_ol²⁺ + Mg_liq²⁺ = M_liq²⁺ + Mg_ol²⁺. is relatively constant over a wide range of SiO₂ content of the liquid, except in the case of Ni²⁺. The partition coefficients have similar ranges both in synthetic and natural rock systems: K^NiO-MgO = 1.8–3.0, K^CoO-MgO = 0.6–0.8, K^FeO-MgO = 0.27–0.38, and K^MnO-MgO = 0.23–0.32. There is a systematic variation in the partition coefficient K^MO-MgO with the composition of liquid; K^MO-MgO increases with increasing SiO₂ content of melt. The partition coefficients for Co²⁺, Fe²⁺ and Mn²⁺ are useful to test the equilibration of olivine with magma of a wide compositional range.