底部滑脱层流变性和厚度变化对褶皱冲断带影响的数值模拟

滑脱层是影响褶皱冲断带的第一因素。为了探讨底部滑脱层流变性和厚度变化对褶皱冲断带的影响,本文通过二维有限差分软件FLAC开展了数值模拟研究。常见的泥岩滑脱层具摩擦性质,此类冲断带采用弹塑性模型;而盐岩滑脱层具蠕变性质,此类冲断带则采用黏弹塑性模型。结果表明,底部滑脱层流变性以及厚度对冲断带的变形影响很大。当滑脱层为泥岩时,发育典型的叠瓦状构造样式,变形序列为背驮式向前扩展的有序序列。而当滑脱层为盐岩时,发育背、向斜相间排列的侏罗山式构造样式,并以无序序列演化。底部滑脱层厚度的变化,对泥岩滑脱层的冲断带而言,主要改变其表面坡角,对构造样式和演化序列影响不大;但对盐岩滑脱层的冲断带影响很大,不管滑脱层最厚的地方分布在后陆还是前陆,变形都会最强烈,地表凸起最高。从后陆向前陆加厚的盐岩滑脱层结合由后陆向前陆略为减薄的上覆地层可产生罕见的后冲、后展式演化序列。这些变形的差异主要是由于盐岩比泥岩具有小得多的剪切强度所致。

Effect of Rheology and Thickness Variation of Basal Detachment on Fold-and-Thrust Belts: Numerical Simulation

Detachment is the prime factor affecting the fold-and-thrust belts.In order to investigate the effect of rheology and thickness variation of basal detachment on fold-and-thrust belts,numerical simulations are carried out by using two dimensional plane strain mechanical models with elastoplastic or viscoelastoplastic material behavior solved with the finite difference software FLAC.Universal mudstone detachment has frictional property.Such fold-and-thrust belts are simulated with elastoplastic constitutive model.In contrast,salt detachment has creep property,so viscoelastoplastic constitutive models are employed for these fold-and-thrust belts.The results show that rheology and thickness of basal detachment influence the fold-and-thrust belts greatly.When the detachment is mudstone,the typical structural style of imbricate fan will develop,also the propagating forward piggy-back thrust sequence;however,when the detachment is salt,structural style will show Jura-type consisted of a series of anticlines and synclines,and out-of-sequence thrusts will appear.Varieties of thickness of basal mudstone detachment will change eventual surface slope of the fold-and-thrust belts,but have little effect on the structural styles and thrust sequence.For salt detachment,the effect is significant,no matter where the thickest detachment distributes,most strongly deformation and the highest surface will be located there.Thickening of salt detachment combined with slight thinning of overburden strata from hinterland to foreland will result in uncommon structural style and thrust sequence:back thrusts and backward propagating.These differences are mainly due to the much smaller shear strength of salt than that of mudstone.