首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于图像处理的岩体结构面迹线半自动检测
引用本文:詹伟,章杨松.基于图像处理的岩体结构面迹线半自动检测[J].岩土工程技术,2020(1):7-12,42.
作者姓名:詹伟  章杨松
作者单位:南京理工大学理学院
基金项目:国防科技重点项目(科工二司[2015]297号)。
摘    要:针对一种基于图像处理的岩体结构面迹线半自动检测的方法进行了研究。该法的基本思路是在图像中人工指定少量难以正确识别的主要裂隙控制点,然后将图像一分为二,分别对二者进行边缘检测,得到两张包含结构面迹线和伪边缘的分段线图片,之后根据距离、角度原则分别对两张图片中的分段线进行迭代连接,最终将检测结果叠加,得到完整裂隙迹线检测结果。该法将主要裂隙与次要裂隙区域分开处理,能够更好地减少二者之间的干扰,所以能够更好地保证主次裂隙识别的完整性与正确性,因而具有更高的精确性。

关 键 词:岩体结构面  边缘检测  迭代连接  半自动检测

Semi-automatic Detection of Rock Mass Discontinuity Trace Based on Image Processing
Zhan Wei,Zhang Yangsong.Semi-automatic Detection of Rock Mass Discontinuity Trace Based on Image Processing[J].Geotechnical Engineering Technique,2020(1):7-12,42.
Authors:Zhan Wei  Zhang Yangsong
Institution:(School of Science,Nanjing University of Science and Technology,Nanjing 210094,Jiangsu,China)
Abstract:A semi-automatic detection method of rock mass discontinuity trace based on image processing was presented.The basic ideas are as following:A small number of main crack control points which are difficult to identify are manually designated in the image,and then the image is divided into two parts,and edge detection is carried out respectively.Two segmented line pictures including discontinuity trace and fake edge are obtained.According to the principle of distance and angle,the segmented lines in the two images are connected iteratively.Finally,the results are superposed to get the complete fissure trace detection results.This method could reduce the interference between the primary and secondary fissures by detecting them separately,and ensure the integrity and correctness of the identification of the primary and secondary fissures with higher accuracy.
Keywords:rock mass discontinuity  edge detection  iterative connection  semi-automatic detection
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号