Rheology of the lower mantle

The rheology of the lower mantle of the Earth is examined from the viewpoint of solid state physics. Recent developments in high-pressure research suggest that the lower mantle contains a considerable amount of (Mg, Fe)O with Fe/Mg + Fe = 0.2–0.3. The pressure and temperature dependences of diffusion in (Mg, Fe)O are estimated by the theory of diffusion in ionic solids. Of the materials composing the lower mantle, (Mg, Fe)O may be the “softest”, and therefore the rheology of the lower mantle may be that of (Mg, Fe)O, unless the framework effect is important.Temperatures in the lower mantle are inferred from the depths of phase transitions and the melting temperatures of the core materials. A thermal boundary layer at the base of the mantle is suggested. The physical mechanisms of creep are examined based on a grain size-stress relation and non-Newtonian flow is shown to be the dominant flow mechanism in the Earth's mantle.The effective viscosity for the temperature models, with and without the thermal boundary layer, is calculated for constant stress and constant strain rate (with depth). For constant strain rate, which may be appropriate for discussing the mechanics of descending slabs, the increase in effective viscosity with depth is smaller than for the constant-stress case, which may be appropriate for discussing the flow induced by the surface motion of plates.The relatively small depth gradient of viscosity, for constant strain rate, suggests that the lower mantle could also participate in convection. The effective viscosity increases with depth, however, by at least 10² to 10³ from the top to the bottom of the lower mantle, for a reasonable range of activation volumes and temperatures. There will be a low-viscosity layer at the base of the mantle, in contrast to the high-viscosity layer at the top of the mantle (plates), if a thermal boundary layer is present. The constant Newtonian viscosity inferred from rebound data may be an apparent feature resulting from the difference in deformation mechanisms between isostatic rebound and large-scale flow.