Thermodynamic data of the high-pressure phase Mg5Al5Si6O21(OH)7 (Mg-sursassite)

 Calorimetric and P–V–T data for the high-pressure phase Mg₅Al₅Si₆O₂₁(OH)₇ (Mg-sursassite) have been obtained. The enthalpy of drop solution of three different samples was measured by high-temperature oxide melt calorimetry in two laboratories (UC Davis, California, and Ruhr University Bochum, Germany) using lead borate (2PbO·B₂O₃) at T=700 ^∘C as solvent. The resulting values were used to calculate the enthalpy of formation from different thermodynamic datasets; they range from −221.1 to −259.4 kJ mol⁻¹ (formation from the oxides) respectively −13892.2 to −13927.9 kJ mol⁻¹ (formation from the elements). The heat capacity of Mg₅Al₅Si₆O₂₁(OH)₇ has been measured from T=50 ^∘C to T=500 ^∘C by differential scanning calorimetry in step-scanning mode. A Berman and Brown (1985)-type four-term equation represents the heat capacity over the entire temperature range to within the experimental uncertainty: C _P (Mg-sursassite) =(1571.104 −10560.89×T ^−0.5−26217890.0 ×T ⁻²+1798861000.0×T ⁻³) J K⁻¹ mol⁻¹ (T in K). The P V T behaviour of Mg-sursassite has been determined under high pressures and high temperatures up to 8 GPa and 800 ^∘C using a MAX 80 cubic anvil high-pressure apparatus. The samples were mixed with Vaseline to ensure hydrostatic pressure-transmitting conditions, NaCl served as an internal standard for pressure calibration. By fitting a Birch-Murnaghan EOS to the data, the bulk modulus was determined as 116.0±1.3 GPa, (K ^′=4), V _T,0 =446.49 ³ exp∫(0.33±0.05) × 10⁻⁴ + (0.65±0.85)×10⁻⁸ T dT], (K _T/T) _P  = −0.011± 0.004 GPa K⁻¹. The thermodynamic data obtained for Mg-sursassite are consistent with phase equilibrium data reported recently (Fockenberg 1998); the best agreement was obtained with Δ_f H ⁰ ₂₉₈ (Mg-sursassite) = −13901.33 kJ mol⁻¹, and S ⁰ ₂₉₈ (Mg-sursassite) = 614.61 J K⁻¹ mol⁻¹. Received: 21 September 2000 / Accepted: 26 February 2001