Analysis of the hypervelocity impact process from impact flash measurements

Hypervelocity microparticle impact experiments were performed with a 2 MV Van De Graaff dust accelerator. From measurements of the light intensity I and the total light energy E, the relations I=c₁mv^4.1 and E=c₂mv^3.2 were obtained, where m is the projectile mass, ν the projectile velocity and c₁,c₂ are constants, depending on projectile and target material. Using the measured values of the spectral distribution of the light emitted during impact, the temperature of the radiating material was estimated to be between 2500 and 5000 K depending on the projectile velocity. From an analysis of these measurements the angular distribution of secondary particle velocities as well as the relative mass distribution of these particles was determined. Approximately 90% of the detected ejecta mass (ν?1 km/sec) is found between 50° and 70° ejection angle. For ejection angles smaller than 20°, ejecta velocities of up to 30 km/sec were detected when the primary particle velocity was 4.8 km/sec. Using the dependence of the light intensity on pressure in the target chamber, an estimate of the total amount of material vaporized during impact could be derived. It was concluded that at 7.4 km/sec particle impact velocity at least 1.6% of the displaced projectile and crater material was vaporized.