Comparison of fast elimination of Cr(VI) by alumina nanofiber and alumina nanoporous

The goal of this study is examination of the mixture between adsorption and permeation process for removing chromium (VI) from the water. Two types of supported membranes are developed: The first one which was made by sol–gel method is called nanoporous and the second one which was made by electrospinning is called nanofiber. The sorption capacity of nanoporous and nanofiber is examined in single batch experiments at various pH values, and it is found that maximum chromium removal is observed for both nanoporous and nanofiber at pH 3.5. Adsorption studies illustrated that the Cr(VI) adsorption onto alumina nanoporous and nanofiber is affected by changes in pH, contact time, dosage of adsorbent, concentration of chromium and solution volume. Langmuir and Freundlich isotherms can be used to explain the adsorption equilibria of Cr(VI) onto alumina nanoporous and nanofiber. It was found that balance adsorption data adequate Langmuir isotherm more than Freundlich model. Adsorption kinetics was found to be fitted to pseudo-second order and Weber and Morris model. The output of multiple linear regressions was run for the second-order response surface model implied that the linear agents of pH, sorbent dosage and Cr(VI) concentration are more significant factors. Manufacturing electrospun alumina nanofiber and sol–gel nanoporous with these cheap materials, renewable and fast methods are so important although the removal percentage is significant.