Impact of mercury emissions from incineration of automobile shredder residue in Japan

Mercury emissions from the incineration of automobile shredder residues (ASRs) were investigated. Continuous monitoring of elemental and reactive gaseous Hg in flue gas was performed in lab-scale and plant-scale ASR incineration. Results of continuous monitoring agreed with those obtained using the JIS K0222 method and Ontario-Hydro method. Before cleaning by air pollutant control devices (APCDs), reactive Hg was the dominant form of that element in both lab-scale and plant-scale results. Emission factors of reactive Hg before APCDs estimated from monitoring results showed large differences between plant-scale and lab-scale emissions. The emission factor in the plant scale was more than 10 times larger than that in the lab-scale, which is explainable by the different Hg contents of ASR. Based on plant-scale monitoring at the stack, emission factors after APCDs were estimated as 0.79 mg-Hg/Mg-ASR for elemental Hg and 6.8 mg-Hg/Mg-ASR for reactive Hg. Using these emission factors, total Hg emissions from ASR incineration were estimated as 2.2 kg/a. An ASR incineration plant investigated in this study used highly effective APCDs. Consequently, these emission factors might result in underestimation of national Hg emissions from ASR incineration. Emission factors estimated from lab-scale monitoring at a fabric filter outlet side might be more appropriate. However, even if emission factors calculated from plant-scale or the lab-scale monitoring are used, estimated emissions are still less than 1.0% of total Hg emissions in Japan. Therefore, Hg emissions from ASR incineration can be evaluated as insignificant. Unless Hg contents of ASR increase extremely, ASR incineration would be a minor source of Hg atmospheric emission in Japan, even if all ASRs were incinerated.