Evaluation of groundwater quality for irrigation and drinking using GIS and geostatistics in a peri-urban area of Delhi, India

Intensive agriculture by indiscriminate use of agrochemicals, sewage water, and polluted drain water has posed a serious threat to groundwater quality in some peri-urban areas of Delhi like Najafgarh block. The objective of the study was to determine the groundwater quality and to map their spatial variation in terms of suitability for irrigation and drinking purpose. Ordinary kriging method was used for preparation of thematic maps of groundwater quality parameters such as electrical conductivity, sodium adsorption ratio, bicarbonate, magnesium/calcium ratio, total dissolved solids, chloride, nitrate and hardness. Exponential semivariogram model was best fitted for all quality parameters except chloride and hardness, where spherical model fitted best. Pollution level was highest at south and south-eastern part of the study area. Better quality groundwater may be expected at the northern and western part. High salinity was due to high chloride concentration in the groundwater. Nitrate pollution level was found to be very alarming and need immediate interventions. High dissolved solids and hardness made the groundwater unsuitable for drinking. There were negligible sodium and bicarbonate hazard in the study area. The groundwater quality index was devised to analyse the combined impact of different quality parameters on irrigation and drinking purposes. The irrigation water quality index and drinking water quality index distribution maps delineated an area of 47.29 and 6.54 km² suitable for irrigation and drinking, respectively. These safe zones were found as a small strip along the northern boundary and a very small pocket at the western side of the study area.