A new method for the quantification of different redox-species of molybdenum (V and VI) in seawater

A new method for the direct determination of reduced and oxidized Mo species (Mo (V) and Mo (VI)) in seawater was developed and used for the first time. The method includes the complexation of Mo (V) with tartrate, solid phase extraction of the Mo (V)–tartrate complex by a XAD 7HP resin, followed by elution with acidic acetone. In this study, the eluted Mo (V) was quantified by graphite furnace atomic absorption spectrometry. The detection limit of this protocol was on the order of 0.2 nM. The analytical precision was 10% of ~ 10 nM. This method was successfully applied to the determination of Mo (V) and Mo (VI) in surface and bottom waters at the head of Peconic River Estuary. Total Mo (Mo (V) + Mo (VI)) ranged from 100–120 nM in most bottom saline waters, and 2.5–15 nM for surface fresher waters. Concentrations of Mo (V) in these environments ranged from 0 nM to ~ 15 nM, accounting for 0%–15% of the total dissolved Mo pool. The time series experiments showed that the Mo speciation changed within 1 h after the water collection, and therefore it is strongly suggested that speciation analysis be carried out within the first 15 min. However, since these are the first Mo speciation data in concentration ranges typical of normal marine and coastal waters, additional research may be required to optimize the methodology and further explore Mo cycling mechanisms.