| 冲击反循环施工中的事故处理 |
| |
| 引用本文： | 俞青山,郭培合,李务伦,王丽伟.冲击反循环施工中的事故处理[J].中国煤田地质,2006,18(3):68-69,74. |
| |
| 作者姓名： | 俞青山 郭培合 李务伦 王丽伟 |
| |
| 作者单位： | [1]吉林省煤田地质二○三勘探队,吉林四平136000 [2]占林省煤田地质勘察设计研究院,吉林长春130062 |
| |
| 摘 要： | 以沈阳虎石台煤机厂生产的反循环钻机为例，介绍了冲击反循环大孔径施工中常见的事故及处理方法。如制作绳索捞取工具及平面搂钩工具打捞砂管丢失；利用钻机大、小臂进行单绳左右冲击处理软砂地层夹钻事故；在钻头处制作圆楔形钢圈打捞开焊震掉的最小底圈，等等，并根据实践经验，分别绘制了相应工具的结构示意图。
|
| 关 键 词： | 钻探 冲击及循环钻进 绳索 搂钩 卡钻 钻头 |
| 文章编号： | 1004-9177（2006）03-0068-02 |
| 收稿时间： | 2006-01-11 |
| 修稿时间： | 2006-01-11 |
Accident Handling in Percussive Reverse Circulation Drilling |
| |
| Yu Qingshan, Guo Peihe, Li Wulun,Wang Liwei.Accident Handling in Percussive Reverse Circulation Drilling[J].Coal Geology of China,2006,18(3):68-69,74. |
| |
| Authors: | Yu Qingshan Guo Peihe Li Wulun Wang Liwei |
| |
| Institution: | 1. Jilin Provincial No.203 Coal Geological Exploration Team, Siping, Jilin 136000; 2. Jilin Provincial Coal Geological Exploration Designing Institute, Changchun, Jilin 130062 |
| |
| Abstract: | To take the reverse circulation drilling rig produced by the Hushitai Coal Mining Machinery Plant as example, introduced familiar accidents and handling methods in percussive reverse circulation large-diameter drilling. Ranging from making of wire-line fishing tool and tabulate carved hook to fish lost sand tube; to use rig arm carry out single wire-line right and left percussion handle drilling tool jamming in soft sandy strata; making round cuneiform steel ring on bit to fish out the smallest bottom ring which is shaking off as a result of welding defect et cetera, and according to practical experiences drafted structural schematic diagram of relevant tools. |
| |
| Keywords: | drilling percussive reverse circulation drilling wire-line carved hook jamming drill bit |
| 本文献已被 CNKI 维普 等数据库收录！ |
