Comparison between grain size and multi-mineral Ar/Ar thermochronology

In the case of volume diffusion, the closure temperature of a mineral is function of, among other factors, the characteristic diffusion dimension, which can be approximated by the grain size of the mineral analysed for grains smaller than or similar in size to the diffusion domains. The theoretical possibility of single mineral grain size thermochronology had been demonstrated empirically in earlier studies, mostly using biotite. In order to examine the potential of this method, it was tested alongside the widely used multi-mineral ⁴⁰Ar/³⁹Ar thermochronology. The sample comes from the granitic McLean pluton, in the south section of the Grenville orogeny. Seven grain size separates of biotite (ranging between 90 and 1000 μm), eight size fractions of amphibole (between 63 and 1000 μm), and three size fractions of K-feldspar (250-600 μm) were extracted and dated by the laser step-heating ⁴⁰Ar/³⁹Ar method. The total gas ages obtained behave as theoretically predicted, with increasing ages for increasing grain sizes, including for K-feldspar, but with the exception of the smallest and the largest grains for biotite and amphibole. The calculated cooling rates are ca. 0.7 °C/Ma for K-feldspar, ca. 2.5 °C/Ma for biotite, and ca. 11 °C/Ma for amphibole, corresponding very well to a monotonic cooling of the McLean pluton. A quick initial thermal re-equilibration with the cooler host-rocks is followed by a much slower cooling on a thermal path parallel to that of the Frontenac Terrain situated immediately to the southeast. The validity of the single mineral grain size thermochronology is demonstrated by comparison with the thermal evolution of the adjacent units and with the cooling history derived from a multi-mineral thermochronology, suggesting that it can be routinely used. The application of this method can be hampered by insufficiently low analytical uncertainties.